Hi,
I have the screen lift issue and when opening my Nexus up I see I have two screws missing. Searching around I've read they are 3.2 mm Phillips screws with M1.4 thread. I know nothing about screws and have tried searching google with no luck. Does anyone know where I can buy these so I can try and replace my missing ones? The guy at HMV said their stock is all the same shipment so if I get a replacement it's most likely to have the same issue.
Any hardware shop. B&Q for example.
*Sent from Nexus S*
Asus apparently decided your screen attachment is better without those two screws, and you are going to replace them. Why?
Sent from my Nexus 7 using xda app-developers app
Put them in and watch that screen rise even more
Sent from my Nexus 7 using Tapatalk 2
really? So the only fix is the glue? I thought as some seem to be fixing their screen lift by tightening the screws it would work. Back to the drawing board I guess.
Sent from my Nexus 7 using xda app-developers app
Give it a shot if you want, sod putting glue anyway near my screen, if its that bad take it back
Sent from my Nexus 7 using Tapatalk 2
The screen lift isn't too bad more worried about it getting worse in the future. I'm thinking about returning it but my Nexus is perfect bar this lift and with all the issues being reported I'm worried I'll get one with even more issues.
Sent from my Nexus 7 using xda app-developers app
I have a little and a mean a little hardly even noticeable screen lift on the left hand side if u hold in portrait and type with ya thumbs its wear my hand would go, I'm not returning again I'm on my 3rd
Sent from my Nexus 7 using Tapatalk 2
Related
Sorry if this has already been asked but I wasn't able to find it after a few minutes of searching.
I got my Nexus 7 today and the screen seems to be making cracking noises as if it's not in place all the way. Is this me just being paranoid after reading so much about the screen issues or is this an omen?
Thanks in advance!
Sent from my Nexus 7 using xda app-developers app
Left hand side towards middle/top?
Welcome to the club. Solved mine by clamping slacks hangers against the side..
many other fixes around the forum here.
Sent from my Nexus 7 using Xparent SkyBlue Tapatalk 2
Yea I've seen the solutions, but I'd rather just send it back if there is an issue. Rooting I have no problem with, but I don't use tools Guess I should avoid getting too attached to my Nexus 7 in case the worst case scenario becomes reality
Sent from my Nexus 7 using xda app-developers app
I just put clothes hangers on the left side of my screen. Holding it perfectly flush against the silver.
Is anybody else's back cover on their nexus 7 loose? The back cover on mine is noticeably loose on the right hand side in that when I squeeze or tap it I can hear it make contact with the front.
Sent from my Nexus 7 using xda app-developers app
Uh, considering how many antennas attach to the back, I think you may want an RMA. no, it shouldn't feel like that.
-Ara
BushyBollocks said:
Is anybody else's back cover on their nexus 7 loose? The back cover on mine is noticeably loose on the right hand side in that when I squeeze or tap it I can hear it make contact with the front.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Yes one of my n7 back cover was way loose on the top and I exchanged it. It shouldn't be loose like that and it should be closed tight at all spots.
Before returning it, I'd take it completely off and try to reseat it first. Then if it's the same, return it.
Sent from my Nexus 7 using xda premium
OK. Sounds like I'll have to exchange it. Thanks for all the replies. Surprised that there wasn't another thread on this topic...
Sent from my Nexus S using xda app-developers app
Is there anyway to tell if I have a screw issue or an
adhesive issue with the screen lift? Thanks
Sent from my Nexus 7 using Tapatalk 2
I'm not a 100% on this but I believe the problems are the same. If you have screen lift then the screws came loose because the glue didn't hold in the heat or was never put on in the first place. I'm on nexus 7 #9..
Sent from my ADR6425LVW using Tapatalk 2
Is this the way the phone is supposed to be? There's a small gap between the top part of the bezel where it meets the glass. I try to keep my phone clean all the time but there are quite a few lint pieces and grime stuck in that gap. The bottom of the phone is tight. Never dropped it. It is an RMA
Sent from my Nexus 4 using xda premium
I think you can snap it back. Press it gently and it'll close.
Sent from my Nexus 4 using Tapatalk 2
Pics?
Sent from my Nexus 4 using xda app-developers app
melcali said:
Pics?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Will post pics when I get to a camera
Sent from my Nexus 4 using xda premium
scream4cheese said:
I think you can snap it back. Press it gently and it'll close.
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Tried pressing on it. Didn't work. Thanks though
Sent from my Nexus 4 using xda premium
As you can see the bottom is tight with no gap. The top has a big enough gap for dirt and debris and no way to get it out.
Sent from my Nexus 4 using xda premium
Definitely not normal, you should probably RMA again if you can't fix it by simple means like the one posted above
Nigeldg said:
Definitely not normal, you should probably RMA again if you can't fix it by simple means like the one posted above
Click to expand...
Click to collapse
Thanks for your reply. All this time I thought it was normal
Sent from my Nexus 4 using xda premium
I have no gap on the top or bottom, and neither do any of the 5 others I know with N4s so yeah, RMA.
send that gaping gap back, son!
...before you get tiny creature eggs in them
Called google play customer service and started the RMA process. Thanks guys
Sent from my Nexus 4 using xda premium
Not going well with my RMA. This was customer service response :
"Thanks for contacting Google. The*specialists*has informed me that the*gaps are to allow for expansion of the glass due to varying temperature and is an intended part of the design.
If you have any*further*questions please feel free to*respond*to this email."
Can some of you guys take some photos of your phones so I can send this robot? Any other suggestions?
Sent from my Nexus 4 using xda premium
Dude, I think even with photos, you would be hard pressed to change their mind. Cosmetic faults are always put down as subjective and not worthy of replacement. You should have told them that you were experiencing some technical fault i.e. frequent dropped calls.
If you aren't successful this time round, RMA it again with such an excuse...
Sent from my Nexus 4 using Tapatalk 2
esskayy said:
Dude, I think even with photos, you would be hard pressed to change their mind. Cosmetic faults are always put down as subjective and not worthy of replacement. You should have told them that you were experiencing some technical fault i.e. frequent dropped calls.
If you aren't successful this time round, RMA it again with such an excuse...
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
We'll see how it goes
Sent from my Nexus 4 using xda premium
I have the same issue but my gaps are much bigger and go throughout the whole screen. Dust and stuff goes in it. The front camera has a dark overlay whenever i use it due to all the dust that has gotten in there. I would RMA it but i bought it off a friend and im not sure if they want to accept it.
Here is a picture of a white door that i took outside using the front camera.
http://alienroms.com/IMG_20130502_194637.jpg
Its very dark and it has a weird dark overlay at the top.
I replaced my screen. And now I am experiencing problems with battery life, and in need of an RMA. My question is how closely does Google look at the device that are shipped back, will they notice that the screen was replaced? I also forgot to put back the blue tab that was connecting the battery and holding the antenna down in place. Will they take the phone apart and find out I had disasebmled it? Also there is a small gap at the bottom between the bezel and the left screw. I think its due to one of the clips not connecting correctly. I could probably fix all those things but I lost my T6 screw driver, so should I worry about any of those things?
Sent from my Nexus 4 using xda app-developers app
Not sure how picky Google is, but I sent a MyTouch slide into T-Mobile with the screen replaced, they noticed. I have no idea how, I put it all back together. I also recently sent my Nexus 4 in to Asurion for a replacement, the screen went wacky and I opened it to see if it was a loose connection. They didn't notice that.
Honestly you won't know until you try.
Wisefire said:
Not sure how picky Google is, but I sent a MyTouch slide into T-Mobile with the screen replaced, they noticed. I have no idea how, I put it all back together. I also recently sent my Nexus 4 in to Asurion for a replacement, the screen went wacky and I opened it to see if it was a loose connection. They didn't notice that.
Honestly you won't know until you try.
Click to expand...
Click to collapse
Thank you for that answer that's why I would like to know if anyone has already tried this
Sent from my Nexus 4 using xda app-developers app
Anyone??
Sent from my Nexus 4 using xda app-developers app
Help me
Sent from my Nexus 4 using xda app-developers app