GOOD AFTERNOON FRIEND HAVE A PROBLEM WITH MY PHONE MOTOROLA DEFY MB525 LED GREEN CM 7.1 Android 2.3.4 BL 9.10
Actualize USING THE LITLE RSD 5.7 PUT THE DRIVER OF MY CELL TO THE COMPUTER TO RECOGNIZE WHAT THEN TIGHTEN ON VOLUME + button and BL WAY INTO A COMPUTER RECONNECT ABRI LITLE put the SBF RSD but stayed WITH WHITE LED .
OTHER USE SBF but kept MOTOROLA LETTER NOT LOADING if you can help.
I'll GARDECERIA oddball.
I forgot my phone IS MADE IN CHINA
Wipe data after sbf flash from stock recovery
Sent from my MB525 using xda premium
Related
I know that there are a lot of helpful and expert Defy Users and Owners here at XDA so I came here for help. :crying::crying:
I have a defy green lens and I had a problem when I flashed a kernel that was not meant for defy, I was not able to go back to CWM recovery so I used RSD Lite to flash an SBF from somewhere around here, but sadly it was for ME525 and it was Chinese. It worked with my phone except for the LED Flash. It is very dim and somehow greenish. I thought it would go away by flashing the CM7 and then going to back to Epsylon's CM9 through CWM recovery but everything is fine with that CM9 except, again, the LED Flashlight. It's the same dim and greenish light. So I tried flashing a different SBF for Defy Jordan but when I do my phone just goes blank after flashing and I cannot go to stock recovery nor open the bootloader (But RSD Lite says connected when I connect the phone to the PC). I tried a couple of SBF's but it's always a blank (black) screen. When I flash that ME525 SBF, it works again.
Can this ever be fixed? Please help me. I don't know what to do. I just want my Defy to have a working LED flashlight.
Sorry but the effin chinese sbf kills the led flash of mb525! It happened to my defy. We're just outta luck! Dumbest mistake I've made. Dumb, dumb, dumb!
Sent from Defy (with dead LED flash--thanks to the effin Chinese SBF)
hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...
sterver1 said:
hi!
I wanted as a normaly update my defy from JB QUARX CM10 25.8. to JB QUARX CM10 28.8.. BUT, when it was instaling suddenly Defy restarted. After it was only showing the logo GOOGLE bud i can not go to boodloader or recovery. I tryied to flash sbf file with RSD but when I connected my defy to PC only white led blinked and nothing happened. PC is not see defy.
What do I do?
pls help me....
thx
Sorry for my english...
Click to expand...
Click to collapse
see this http://forum.xda-developers.com/showthread.php?t=1150155 try to charge your battery fully. hope it works..
you tried in another PC o USB cable ?
I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.
sterver1 said:
I can not go to recovery. But I managed to go to flash menu (or what is this (power + volumeup and place battery))- i tryed to flash this:"Froyo_CEE_2.2.2\JRDNEM_U3_3.4.2_179-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_P DS03C_USAJRDNFRYORTCEE_P016_A016_HWp3_Service1FF.s bf" with RSD Lite but: "Failed lashing process. Failed lashing process. Phone[0000]: Error getting subscriber unit informatieon. Device API Error: 0xE 0030007 Command RQHW (0xE0831007); phone disconnected"
After it I tryed agine go to to power + volumeup and place battery but it write Baterry low. Now propably I charing batery (I have connected my defy to AC and GOOGLE is showing, battery heating). Then I try to flash it agine. - that isn't working
Propabbly I must use maccgyver hack but I haven't got any bad or superfluous USB cabel.
Click to expand...
Click to collapse
Try to enter stock recovery ab do a factory reset
If your battery is really empty you can use ab old Nokia wallcharger out else ....... just figure out what is plus and what is minus....
Sent from my MB526 using xda app-developers app
Do you have the appropriate drivers installed on your pc for rsd? You have to be able to flash an sbf, a failed Cm update flash won't brick your Defy, it's much harder to brick it...
Sent from my MB525 using xda app-developers app
lexer98: Yes I tried it... It is same.
bone101: I can not enter to any recovery.
sa3e1: Yes, I have all drivers.
I try the other.
Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app
sa3e1 said:
Turn off defy, then hold power and vol+ button for 5-10 sec, when you release the buttons, your phone will power up in Stock bootloader. Does it work until this point?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
When I do that, on screen show: Battery Low - Cannot program.
But all is OK because I bought universal charger and now I'm charing battery..:cyclops:
Next I flash correct SBF file via RSD Lite. Is it ok?
And the phone isn't charging when it's off?? I hope it will be ok after charging battery with external charger! Then go to stock bootloader and flash a stock sbf, or if you want to go straight to CM10 try Easy Recovery sbf:
http://forum.xda-developers.com/showthread.php?t=1787541
Sent from my MB525 using xda app-developers app
Done
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)
sterver1 said:
Hurray....
My Defy is working now....
Thanks for your help.
I did it as follows: I chared my battery with universal charger. Then I went to stock bootloader (power+volume up) and conected my phone to PC. After it I flash two SBF files* via RSD Lite. Then I went to recovery and wiped all. Now my phone working well....
* first: Froyo_CEE_2.2.2.zip
second: CM7RC1.5_16_09_11_custom.sbf
(I will upload this files to some File Hosting and I'll post here links)
Click to expand...
Click to collapse
Why 2?
Only 1 is enough
Also AICS that is older version of CM7…
Flash froyo and root it...
Install 2ndInit and using cwm install CM10
If you screw up...I am not responsible!
Sent from my MB525 using xda app-developers app
All is ok.... Now I'm using CM10.
Hi there,
I bricked my Defy Plus from CM10, 2ndInit. I've wanted to flash again the original .sbf cause of warranty issues. I wasn't sure witch version I had on the original so I thought I'll go from one to one in the list of droid developers SBF( can't create link )
After flashing with RSD light there was 2 possible outcome:
1. Flashing completed normally but after device rebooted, it hanged at the Motorola Logo infinetly.
2. Flashing completed, but the device turned off itself, and after trying to turn on, nothing was rendered, HOWEVER I've noticed, that it can be still booted into bootloader mode, cause I could see it listed in the RSD Lite device list.
I thought that was the worst case scenario, turns out its not:
After flashing DFP-137 device cannot be turned on, won't apper in RSD Lite, nothing.
A symptem is, that if connected the white led glows.
Is it possible I bricked it to such state, that I've got no options? If not, what should I do.
I think the cell got supply, cause I licked it, and felt normal ( electricity was riding trough my thoung ).
Any tipps are welcome, hit me!
Maybe it's low on battery, did you factory reset from stock recovery?
Sent from my MB525 using xda app-developers app
sa3e1 said:
Maybe it's low on battery, did you factory reset from stock recovery?
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
No, I figured for removing rooted state, I should reflash the full .sbf.
As I said, it feels charged, mb I'll try go for McGuyver charing method.
If I can reanimte my Defy into bootloading state, how do I know witch .sbf is the correct one??
defy problem
Dear All,
I had flashed Motorola defy plus with kitkat a month ago. As it was getting hanged, i tried to switch it to stock rom but the RSD lite is giving error while flashing everytime.
i have tried many sbf but it diidnt worked out. kindly let me know the correct procedure and the SBF should i flash.
Now its showing Motorola logo only and doesnt move ahead neither i am unable to reach stock recovery.
i did it all by charging battery from universal charger as i cant even charge my battery.
I am in need of urgent help and didn't want let die my DEFY PLUS
Regards
Abhishek
Hi. I think I bricked my phone...... All I get now is Black screen, nothing happens when I try to start the Bootloader , and also nothing happens when I try to start the hard reset (holding the volume + and power button) ... All i get is a black screen , my phone is recognized by the RTD Lite, I tried flashing stock software but I still get the same Black screen , and the thing is that I also get a white LED when i connect it to RTD Lite , after I finish my flashing ( I tried many stock softwares) the RTD says that the phone is rebooting but the screen just turns off and remains black , that's it..... I tried removing the battery and such, I have 2 batteries both of them are fully charged... I have all the drivers installed on my pc , I think that how this happened is I flashed by mistake a DEFY + stock soft... is there and hope ??
Thank you.
looperman said:
Hi. I think I bricked my phone...... All I get now is Black screen, nothing happens when I try to start the Bootloader , and also nothing happens when I try to start the hard reset (holding the volume + and power button) ... All i get is a black screen , my phone is recognized by the RTD Lite, I tried flashing stock software but I still get the same Black screen , and the thing is that I also get a white LED when i connect it to RTD Lite , after I finish my flashing ( I tried many stock softwares) the RTD says that the phone is rebooting but the screen just turns off and remains black , that's it..... I tried removing the battery and such, I have 2 batteries both of them are fully charged... I have all the drivers installed on my pc , I think that how this happened is I flashed by mistake a DEFY + stock soft... is there and hope ??
Thank you.
Click to expand...
Click to collapse
anyone???
Flash dfp 231 sbf. If stuck on Motorola logo wipe data from stock recovery
Sent from my MB526 using xda premium
thekguy said:
Flash dfp 231 sbf. If stuck on Motorola logo wipe data from stock recovery
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
where can I find this sbf ?
looperman said:
where can I find this sbf ?
Click to expand...
Click to collapse
I hope this helps http://forum.xda-developers.com/showthread.php?t=966537
Before I bricked my phone , I think I flashed a SBF for Defy+ ......
is there still any hope ?
Looks like you're trying to flash an sbf with a bootloader version lower than the one you had. Flash the DFP 231 CEE sbf as suggested above. That should work.
Root it and flash one of the custom kernel builds. Hope this helps.
Sent from my MB526 using xda premium
heip me
Hai guys, i am currently using defy+ mb 526 2.3.6. it is rooted but not installed cmw. it is stuck with logo M. its loading boot. suggest me some custom sbf stack to flash
The phone battery on my Defy+ running CM10.1 died while connected to RSD Lite. I was able to get things going again using the McGyver USB cord hack, however all I see now is a black screen unless I am hooked up to RSD Lite and downloading at which point I see, "SW UPDATE IN PROGRESS...". RSD Lite appears to be loading software successfully, however none of the loaded ROMs have booted. I cannot see any of the boot loader icons, (red Motorola logo, or Android with the question mark in a triangle), and I can not get the white writing down the left margin after holding the "up" button while powering on. Pressing the on-off switch does cause RSD Lite to show that the device is connected, and pressing the button again causes a disconnect.
Is my device irretrievably bricked? TIA.
No, your device isn't bricked, Defy not possible to brick. You simply flashed lower version SBF that is on you phone. Since you have Defy+ you'll need to flash 4.5.1-134_DFP-231 BL7 sbf to get working phone again.
Sent from my Atrix 2 using Tapatalk.
turffe said:
No, your device isn't bricked, Defy not possible to brick. You simply flashed lower version SBF that is on you phone. Since you have Defy+ you'll need to flash 4.5.1-134_DFP-231 BL7 sbf to get working phone again.
Sent from my Atrix 2 using Tapatalk.
Click to expand...
Click to collapse
Defy is difficult but not impossible to brick!
turffe said:
No, your device isn't bricked, Defy not possible to brick. You simply flashed lower version SBF that is on you phone. Since you have Defy+ you'll need to flash 4.5.1-134_DFP-231 BL7 sbf to get working phone again.
Sent from my Atrix 2 using Tapatalk.
Click to expand...
Click to collapse
Where can I download this? I've been working through the SBF files here: "http://sbf.droid-developers.org/", but the one you mentioned isn't one of them. Thanks.
Got it.
Flashed "DEFYPLUS_U3_4.5.1-134_DFP-231_ND_SIGN_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P011_A013_Service1FF", and that fixed everything.