Hi,
I have HTC Desire HD(AT&T).
I flash it with S-off and not sure that either it is rooted or not. Its cid was 11111111
I use following RUU and we can say that I downgrade it.
RUU_Ace_HTC_WWE_1.32.405.3_Radio_12.28b.60.140e_26.03.02.15_M3_release_155032_signed.
After successfully flash phone not power on. I try to power on phone bu not success and no hboot menu as well. I pull off battery and insert it back.
Phone power on automatically after 4-5 minutes. But after power off phone buttons not works e.g Power button+volume down and up.
Please someone guide me and help. plsssssssssssssss
sorry for poor English.
Thanks and regards,
nsnobel2 said:
Hi,
I have HTC Desire HD(AT&T).
I flash it with S-off and not sure that either it is rooted or not. Its cid was 11111111
I use following RUU and we can say that I downgrade it.
RUU_Ace_HTC_WWE_1.32.405.3_Radio_12.28b.60.140e_26.03.02.15_M3_release_155032_signed.
After successfully flash phone not power on. I try to power on phone bu not success and no hboot menu as well. I pull off battery and insert it back.
Phone power on automatically after 4-5 minutes. But after power off phone buttons not works e.g Power button+volume down and up.
Please someone guide me and help. plsssssssssssssss
sorry for poor English.
Thanks and regards,
Click to expand...
Click to collapse
I'm a little confused. Was your phone S-OFF before you ran the RUU? How did you root it and make HBOOT S-OFF?
bananagranola said:
I'm a little confused. Was your phone S-OFF before you ran the RUU? How did you root it and make HBOOT S-OFF?
Click to expand...
Click to collapse
Sir thanks for your quickest reply.
Yes it was already S-Off when came to me, I check it and and cid was checked by adb command"fastboot getvar all".
nsnobel2 said:
Sir thanks for your quickest reply.
Yes it was already S-Off when came to me, I check it and and cid was checked by adb command"fastboot getvar all".
Click to expand...
Click to collapse
Ok, if HBOOT says S-OFF that means you're rooted. What happens when you try to turn it on while holding power and volume-down? Will it turn on? What appears?
bananagranola said:
Ok, if HBOOT says S-OFF that means you're rooted. What happens when you try to turn it on while holding power and volume-down? Will it turn on? What appears?
Click to expand...
Click to collapse
No response by phone. Sceen blank. But when I press Volume up+down+ power , Orange light of charging become green.
nsnobel2 said:
No response by phone. Sceen blank. But when I press Volume up+down+ power , Orange light of charging become green.
Click to expand...
Click to collapse
It sounds like your bootloader is very very messed up...we're going to need to wait for someone who knows how to fix that, or if it is even possible.
bananagranola said:
It sounds like your bootloader is very very messed up...we're going to need to wait for someone who knows how to fix that, or if it is even possible.
Click to expand...
Click to collapse
Thanks for your time. May be some one will help me and solve my problem
nsnobel2 said:
Thanks for your time. May be some one will help me and solve my problem
Click to expand...
Click to collapse
Take out the battery for five minutes. Then press volume down button and while holding it down press the power button. What happens?
Sent from a dream.
Teichopsia said:
Take out the battery for five minutes. Then press volume down button and while holding it down press the power button. What happens?
Sent from a dream.
Click to expand...
Click to collapse
nothing..... just blank screen
Does your pc recognize it?
uros0104 said:
Does your pc recognize it?
Click to expand...
Click to collapse
When it is power off and in charging mode, its not recognize but
when power on completely , it show as a "My HTC under Android USB devices"
Its also takes much time to power on completely , from 3-6 minutes
nsnobel2 said:
When it is power off and in charging mode, its not recognize but
when power on completely , it show as a "My HTC under Android USB devices"
Its also takes much time to power on completely , from 3-6 minutes
Click to expand...
Click to collapse
Pls moderator/seniors .help
nsnobel2 said:
Pls moderator/seniors .help
Click to expand...
Click to collapse
Can adb see it from your PC when it is plugged in? Try "adb devices." What does it say?
bananagranola said:
Can adb see it from your PC when it is plugged in? Try "adb devices." What does it say?
Click to expand...
Click to collapse
Problem solved. Special thanks to Sir Behtas for his personally support to get rid of this problem. I am posting his thread with again special thanks to him. I am also thankful to all of you for guide and help me.
Source is below to help other people.
unbrick htc desire hd rev after downgrade to 2.2 without jtag!!! By Behtash
http://forum.gsmhosting.com/vbb/f66...rev-after-downgrade-2-2-without-jtag-1500778/
Related
Hi..
Yesterday, i where to flash my Touch with a new ROM. But before the flashing was done, the Touch frooze completely, and now when i power it on, it stays on the "smart mobility" screen.
So... anyone know's if it's possible to fix this or what?
Please help me
BazookaAce said:
Hi..
Yesterday, i where to flash my Touch with a new ROM. But before the flashing was done, the Touch frooze completely, and now when i power it on, it stays on the "smart mobility" screen.
So... anyone know's if it's possible to fix this or what?
Please help me
Click to expand...
Click to collapse
Better to post this in the ELF forum mate
Good luck!
Hold the red and green button down and press and hold the power/reset button on top and wait until a screen pops up.
ludester said:
Hold the red and green button down and press and hold the power/reset button on top and wait until a screen pops up.
Click to expand...
Click to collapse
I've done that. It dosn't help.. I don't think i've got a ROM in my device now.. How can i flash it then?
BazookaAce said:
I've done that. It dosn't help.. I don't think i've got a ROM in my device now.. How can i flash it then?
Click to expand...
Click to collapse
Typically you put it in bootloader mode and then reflash as normal. Are you not able to get in to bootloader mode?
blazingwolf said:
Typically you put it in bootloader mode and then reflash as normal. Are you not able to get in to bootloader mode?
Click to expand...
Click to collapse
I can on a good day.. The phone is very unstable for the moment.. But when i try to flash a new ROM from Bootloader, Active Sync can't detect the device. Is that normal?
The phone is unlocked, and it shows "USB" on the screen when i plug the USB in Bootloader..
BazookaAce said:
I can on a good day.. The phone is very unstable for the moment.. But when i try to flash a new ROM from Bootloader, Active Sync can't detect the device. Is that normal?
The phone is unlocked, and it shows "USB" on the screen when i plug the USB in Bootloader..
Click to expand...
Click to collapse
Yes. All you have said above is absolutly normal. When you see the "USB" just flash it. Have you ever flash your device before?
cronexy said:
Yes. All you have said above is absolutly normal. When you see the "USB" just flash it. Have you ever flash your device before?
Click to expand...
Click to collapse
Jepp, i have! So thank you so much! I'll keep you updated!
help.After root with visionari r13 the phone is stuk and has a red triangle with an exclamation mark.After hard reset no change.
help.After root with visionari r13 the phone is stuk and has a red triangle with an exclamation mark.After hard reset no change.
Turn the phone off. Hold Volume Down + Power. What happens?
Are you sure he can push both the volume and power buttons at once? They are very stiff to press, you know!
(Apologies to xspyda in advance (this damn sarcasm is gonna get me in trouble one day.....))
the device opens and then the triangle appears again
RobTheRover said:
Are you sure he can push both the volume and power buttons at once? They are very stiff to press, you know!
(Apologies to xspyda in advance (this damn sarcasm is gonna get me in trouble one day.....))
Click to expand...
Click to collapse
Oh Boy!
The buttons are not stiff, that wasn't my point .... as I am sure you are well aware?!
nmotor said:
the device opens and then the triangle appears again
Click to expand...
Click to collapse
Not sure if you can flash the RUU when in this state - is it communicating with your PC when the tirangle is up and it's plugged in?
I'give it a try now
nothing is happening....any more suggestions?
nmotor said:
nothing is happening....any more suggestions?
Click to expand...
Click to collapse
Can you get into the bootloader? you haven't said from the earlier post. If so you could flash the PD98IMG to get it back to stock.
the screen is white and i can only press 'fast boost' 'recovery' 'factory reset' 'simlock' and 'image crc'
nmotor said:
the screen is white and i can only press 'fast boost' 'recovery' 'factory reset' 'simlock' and 'image crc'
Click to expand...
Click to collapse
Now we're getting somewhere
read this thread..http://forum.xda-developers.com/showthread.php?t=841890
you need to carry out the 'common steps' and then the 'install through phone' method.
This will bring you back to the state that you bought the phone.
xspyda said:
Oh Boy!
The buttons are not stiff, that wasn't my point .... as I am sure you are well aware?!
Click to expand...
Click to collapse
LOL
Sent from my Desire HD using XDA App
Once in recovery, can you connect to the pc and flash the ruu to restore to default?
Not sure if this is possible from recovery but I'm sure someone will know...
xspyda said:
Once in recovery, can you connect to the pc and flash the ruu to restore to default?
Not sure if this is possible from recovery but I'm sure someone will know...
Click to expand...
Click to collapse
Not necessary, all that needs to be done is flash the rom.zip from the RUU (PD98IMG) the phone checks for it as soon as it goes into bootloader automatically.
Fair play. I just figured that for someone not familiar with Rom flashing it might be easier to simply run an exe file with the dhd connected to the pc.
As I say though, not even sure that's possible when in recovery.
Volume - and Power Button just doesn't work.
I am following this guide http://forum.xda-developers.com/showthread.php?p=11557769 and got to the "Flashing a Radio" section and I'm stuck.
What am I doing wrong?
Got it working.
Had to take the battery out to make the unit actually turn off fully.
Don't know.
What happens when you press the power button whilst holding the vol- key?
[EDIT] Never mind then.
TylerDurdenK said:
Got it working.
Had to take the battery out to make the unit actually turn off fully.
Click to expand...
Click to collapse
You got fastboot on ?
TylerDurdenK said:
Got it working.
Had to take the battery out to make the unit actually turn off fully.
Click to expand...
Click to collapse
That's fastboot option in Android. It doesn't turn off the phone completely so naturally you cannot access bootloader.
In Android 2.3 it's located at Settings->Power, so turn it off there. In FroYo it's somewhere else, can't remember where.
I cant access anything now
Code:
adb reboot bootloader
Go to setting and turn off fast boot
Sent from my Desire HD using XDA App
I have changed my GSII rom to 2.3.4. and would like to root the GSII again, finally I disconnect the odin, then the GSII can't reboot and the battery become very hot.
Who can help me or how can I do with my GSII? Thank you very much
kyman said:
I have changed my GSII rom to 2.3.4. and would like to root the GSII again, finally I disconnect the odin, then the GSII can't reboot and the battery become very hot.
Who can help me or how can I do with my GSII? Thank you very much
Click to expand...
Click to collapse
Try to get out the battery for 2-3 minutes, let the heat to disapear, put the batt back and power on. Hope will work
No, it doesn't work and I think the rom get problem so is there any solution? Thank you very much
kyman said:
No, it doesn't work and I think the rom get problem so is there any solution? Thank you very much
Click to expand...
Click to collapse
Well, I suggest you to try VillainROM 2.1. You will have to flash cf-root (the version of it has to be the same as the version of your current f/w), connect your phone to pc and get the VR 2.1 into your sd card then power off your phone, volume up + power + home button - do a full wipe - choose to install a zip from sd, flash villain and you will be fine..hope so. If you get stuck @ any point, you can scream for help cuz I will be here to support you mate
Forgot to get you this: http://forum.xda-developers.com/showthread.php?t=1103399 It might help you though.
The main problem right now is I can't reboot my GSII so I can't do anything now.
Do you have any suggestion?
kyman said:
The main problem right now is I can't reboot my GSII so I can't do anything now.
Do you have any suggestion?
Click to expand...
Click to collapse
Just tell me one thing: is your phone powered on and is stuck? You can't do anything? Even if you pull out the battery and get it back, wont boot or what exactly?
yes, it is power on and stuck and it can't open. I pull out the battery and put is back and it won't boot.
kyman said:
yes, it is power on and stuck and it can't open. I pull out the battery and put is back and it won't boot.
Click to expand...
Click to collapse
Try to enter download mode (volume down + power button + home button) and flash with odin a stock rom.
The main problem now is I can power on my GSII so I can't enter any download mode and recovery mode.
I don't know how to do now and please help me, thank you.
Just power off your phone. If doesn't work by the power button, pull out the battery. When the phone is powered off, press the 3 buttons same time and you will enter download mod.
Sorry for my typo mistake, now I can't power on my GS2 so I don't know how to enter to download mode
kyman said:
Sorry for my typo mistake, now I can't power on my GS2 so I don't know how to enter to download mode
Click to expand...
Click to collapse
You dont have to power on your device to enter download mode. Just push VOLUME DOWN BUTTON, POWER BUTTON and HOME BUTTON in the same time. Then, push volume down to enter odin mode. After that, connect your cable to your device and press start in odin (before that, dont forget to put the stock f/w into PDA in Odin)
My GSII still no response and I think the row is dead and can't bootup so how can I do? Tks brother
So after your flashing width odin did odin say pass or complete?
You may still be able to get into download mode but just not see it,
When you hold the key combination then plug it into odin and see if it comes
Up with the yellow box that tells your if your device is connected.
edit : so you hold power, volume down and home then you have to press up to enter download mode, after this plug it in to odin and see if you can see the phone.
There is no response after boot my phone and it hasn't say pass or complete.
Then the phone can't open again and I don't know how to do now, please help.
kyman said:
There is no response after boot my phone and it hasn't say pass or complete.
Then the phone can't open again and I don't know how to do now, please help.
Click to expand...
Click to collapse
try to press the 3 buttons for the download mode until it again .... wait up to 1-1.5 minutes, while holding the 3 keys..... if does not work,I think that the bootloader could be damaged
If the bootloader has been damaged, is there any solution? Tks
kyman said:
If the bootloader has been damaged, is there any solution? Tks
Click to expand...
Click to collapse
I hope isn't bootloader ..... if so, only to samsung service center
kyman said:
If the bootloader has been damaged, is there any solution? Tks
Click to expand...
Click to collapse
however, explain the procedure you have done well to flash the rom and what files have you used for flash rom with Odin
Hi everyone. I tried to downgrade from kitkat on my lg g2 d800 and I followed the guide and downloaded the necessary files but now my phone wont boot and windows can't detect it. I can't get into fastboot...please help
I think you just need to do a hard reset. Unless something went wrong during the flash?
Downgrading requires a factory reset. Power off the phone, press volume down and power button until the LG logo appears then press power again. Should take you to factory reset mode.
Otherwise you can flash KK again using the kdz from download mode (plug to your computer whilst holding volume up I believe)
Sent from my LG-D801 using Tapatalk
Johnl120 said:
Hi everyone. I tried to downgrade from kitkat on my lg g2 d800 and I followed the guide and downloaded the necessary files but now my phone wont boot and windows can't detect it. I can't get into fastboot...please help
Click to expand...
Click to collapse
Pleast try to reboot the phone(if not, just take out the battery.)
Thank you everyone. Something did go wrong during the flash...it just stopped abruptly at 12 percent. I tried doing a hard reset by holding the volume down and then letting go when the logo appeared and then pressing the buttons again. It says resetting in progress but then shuts off.
Hermosa said:
Pleast try to reboot the phone(if not, just take out the battery.)
Click to expand...
Click to collapse
The phone has a non-removable battery...
AnteusFogg said:
Downgrading requires a factory reset. Power off the phone, press volume down and power button until the LG logo appears then press power again. Should take you to factory reset mode.
Otherwise you can flash KK again using the kdz from download mode (plug to your computer whilst holding volume up I believe)
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Fastboot doesn't work anymore...my pc doesn't recognize it anymore. Holding the power button brings the lg logo on but then it quickly disappears.
Johnl120 said:
The phone has a non-removable battery...
Click to expand...
Click to collapse
uhhh. thorny
offenberg said:
I think you just need to do a hard reset. Unless something went wrong during the flash?
Click to expand...
Click to collapse
I think something did go wrong because I can no longer access fastboot by pressing the power button and holding +. Holding the power button and the volume - key and then letting go and pressing them again when the lg logo comes up again, brings up the hard reset menu. But when I confirm the reset the phone shuts off...
Try this. http://forum.xda-developers.com/showthread.php?t=2582142
Don't know if you have experience with Ubuntu. But its easy to install and the process is easier than it looks.
Check if your phone has some if these symptoms. And please note that you CAN'T use the files provided in the OP. You need the files for D800.
offenberg said:
Try this. http://forum.xda-developers.com/showthread.php?t=2582142
Don't know if you have experience with Ubuntu. But its easy to install and the process is easier than it looks.
Check if your phone has some if these symptoms. And please note that you CAN'T use the files provided in the OP. You need the files for D800.
Click to expand...
Click to collapse
I tried this and the command "ls /dev/sd*" doesn't detect the phone.
Why were you trying to Downgrade?
Sent from my LG-D801 using Tapatalk
Johnl120 said:
I tried this and the command "ls /dev/sd*" doesn't detect the phone.
Click to expand...
Click to collapse
Unplug your device, run the following command and plug the device back in (maybe you have to execute the command again):
dmesg -c
This should show you all USB system events. Your phone should show up as /dev/s<omething>.
However, the phone needs to be powered on. If it shut's itself off, Linux probably can't connect to it ...
AnteusFogg said:
Why were you trying to Downgrade?
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
I was trying to downgrade so that I could root.
saimonsez said:
Unplug your device, run the following command and plug the device back in (maybe you have to execute the command again):
dmesg -c
This should show you all USB system events. Your phone should show up as /dev/s<omething>.
However, the phone needs to be powered on. If it shut's itself off, Linux probably can't connect to it ...
Click to expand...
Click to collapse
Thank you. I will try this later on today. The battery might have completely died which might mean that the phone was on the entire time...
You're welcome. And please don't forget the Thanks-button if my hint was helpful
saimonsez said:
You're welcome. And please don't forget the Thanks-button if my hint was helpful
Click to expand...
Click to collapse
Thanks but it still doesn't work...Ubuntu won't detect it.