I have flashed the generic XEU bada 2.0 firmware on my unlocked Bell Canada Wave 1 and now my Bell SIM no longer works because it does not have the UTMS 850 frequency, but works with my Rogers SIM.
I'm just wondering is there is a modem out there or if i can use the modem from the 1.0 firmware that came with the phone so that it will work on any Rogers/Bell and Telus?
These are the frequencies i need in the modem.
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100
HSDPA 850 / 1900 - North America
Related
Audiovox SMT 5600 - GSM 850 / GSM 1800 / GSM 1900 or GSM 850 only?
The SMT 5600 supports these frequency bands: GSM 850 / GSM 1800 / GSM 1900. The difference between that and the SPV C500 is that the C500 is on GSM 900 / GSM 1800 / GSM 1900.
Basically, GSM 850 is used in the US while GSM 900 was used in Europe (nowadays Europe uses the 1800 band afaik).
shandar, 10x!
I need enable UMTS 850 in Touch Cruise, it's possible ??
Or need enable GSM 1800 + UMTS 850, the cruise comes only with GSM 1800 + UMTS 850?
Thanks
why wouldn't you use 1800+UMTS 850? what's the difference?
Operator Frequency
The Network used in Brazil are defined.
GSM 1800 + UMTS 850mhz
or
GSM 1800 + UMTS 2100mhz
When I stay in region with 2100mhz my Polaris works fine, but I go to another region with 850mhz, I need change to GSM only to use Phone.
Is anyone able to access their phones radio description / capabilities through software? I mean a display showing
GSM 900 / 1800 / 1900 vs. say GSM 850 / 900 / 1800 / 1900
or 2100MHz UMTS/HSDPA vs. 850 / 1900
for example?
Please advise.
i want to know if this cell phone will work with this band GSM 850 / 900 / 1800 / 1900 this phone is locked with claro and i want make it work with tigo, also if this cell phone work with this band is there a way to unlock on this forum?
thanks in advance for the answers
unlocked versions do:
Gsm 850 / 900 / 1800 / 1900
wcdma 850 / 1900 / 2100
I doubt the locked ones have a different radio (physical one). The software is a whole other story.
Hi,
I found OPO ONE + tutorial about adding LTE BAND in Qualcomm device and i want to make the same thing with my LG F320K.
I try to add GSM and 3G BAND by putting 844425030534016 in 1877 nv value with QSDM but when i start QPST software
downloader it didn't show me a change after a reboot. I try to change this value with QPST Software Downloader and i ve got this error: NV_IMEI_SV, that don't allow me to make the change.
I want to add LTE B20 800Mhz but cannot.
Can someone give me the Qcn backup of an international D802 or help me to activate all necessary network in my country (France)?
Thanks a lot, best regards.
844425030534016 with mzTool gave me:
[Bit_07] GSM DCS 1800 band
[Bit_08] GSM Extended GSM (E-GSM) band
[Bit_09] GSM Primary GSM (P-GSM) band
[Bit_18] GSM 750 band
[Bit_19] GSM 850 band
[Bit_20] GSM Railways GSM 900 Band
[Bit_21] GSM PCS 1900 band
[Bit_22] WCDMA Band I - EUROPE JAPAN & CHINA IMT 2100 band
[Bit_23] WCDMA Band II - US PCS 1900 band
[Bit_24] WCDMA Band III - EUROPE & CHINA DCS 1800 band
[Bit_26] WCDMA Band V - US 850 band
[Bit_48] WCDMA Band VII - EUROPE 2600 band
[Bit_49] WCDMA Band VIII - EUROPE & JAPAN 900 band