I need enable UMTS 850 in Touch Cruise, it's possible ??
Or need enable GSM 1800 + UMTS 850, the cruise comes only with GSM 1800 + UMTS 850?
Thanks
why wouldn't you use 1800+UMTS 850? what's the difference?
Operator Frequency
The Network used in Brazil are defined.
GSM 1800 + UMTS 850mhz
or
GSM 1800 + UMTS 2100mhz
When I stay in region with 2100mhz my Polaris works fine, but I go to another region with 850mhz, I need change to GSM only to use Phone.
Related
Audiovox SMT 5600 - GSM 850 / GSM 1800 / GSM 1900 or GSM 850 only?
The SMT 5600 supports these frequency bands: GSM 850 / GSM 1800 / GSM 1900. The difference between that and the SPV C500 is that the C500 is on GSM 900 / GSM 1800 / GSM 1900.
Basically, GSM 850 is used in the US while GSM 900 was used in Europe (nowadays Europe uses the 1800 band afaik).
shandar, 10x!
Hi!
Is there any application, code, hack or something that I can use in my Wizard to show which GSM frequency it is using to connect to the network (850, 900, 1800 or 1900 Mhz)?
Thanks!
[]s,
Daniel.
i want to know if this cell phone will work with this band GSM 850 / 900 / 1800 / 1900 this phone is locked with claro and i want make it work with tigo, also if this cell phone work with this band is there a way to unlock on this forum?
thanks in advance for the answers
unlocked versions do:
Gsm 850 / 900 / 1800 / 1900
wcdma 850 / 1900 / 2100
I doubt the locked ones have a different radio (physical one). The software is a whole other story.
Hello
Is possible to enable to band HSPA to 850 MHz?
my operator works with 850 MHz
My Wildfire is 900MHz
Looking in the internet I see that HTC Wildfire for Australia have this specification(850/2100)MHz
http://www.htc.com/au/product/wildfire/specification.html
Is possible get the rom or Radio patch of these Phones (Australia) and enable this feature, if the answer is yes, where can i get this rom? or exists other way to enable this feature
Dmonium
Excuse me if my english is so bad
No. The phones either support 900 or 850 Mhz (amongst other frequencies).
If you have a 900 Mhz phone ti will not work on 850Mhz no matter what software you use.
Likewise, my 850Mhz Wildfire will not work on 900Mhz networks
In WildPuzzle rom
Add to Home screen/Shortcuts/Activities/Settings/com.android.settings.BandMode
After start you can Set GSM/UMTS band
Automatic/Euro/USA/Japan/AUS/AUS2
Hi,
I found OPO ONE + tutorial about adding LTE BAND in Qualcomm device and i want to make the same thing with my LG F320K.
I try to add GSM and 3G BAND by putting 844425030534016 in 1877 nv value with QSDM but when i start QPST software
downloader it didn't show me a change after a reboot. I try to change this value with QPST Software Downloader and i ve got this error: NV_IMEI_SV, that don't allow me to make the change.
I want to add LTE B20 800Mhz but cannot.
Can someone give me the Qcn backup of an international D802 or help me to activate all necessary network in my country (France)?
Thanks a lot, best regards.
844425030534016 with mzTool gave me:
[Bit_07] GSM DCS 1800 band
[Bit_08] GSM Extended GSM (E-GSM) band
[Bit_09] GSM Primary GSM (P-GSM) band
[Bit_18] GSM 750 band
[Bit_19] GSM 850 band
[Bit_20] GSM Railways GSM 900 Band
[Bit_21] GSM PCS 1900 band
[Bit_22] WCDMA Band I - EUROPE JAPAN & CHINA IMT 2100 band
[Bit_23] WCDMA Band II - US PCS 1900 band
[Bit_24] WCDMA Band III - EUROPE & CHINA DCS 1800 band
[Bit_26] WCDMA Band V - US 850 band
[Bit_48] WCDMA Band VII - EUROPE 2600 band
[Bit_49] WCDMA Band VIII - EUROPE & JAPAN 900 band