So I rooted my friends Droid 2 that's what's in firmware 2.3.4 . I used the method in rootwikiz with the bootable CD. After that I install bootstrap recovery and flash the new AOKP v39 beta. So after that phone bootup and everything fine but the battery won't charge. So I try another battery and phone boot up but the other battery won't go down. Its stuck at 100%. It won't charge the other battery. Or light up when I connected to charge
Can you help me
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
rom or sbf may not have installed correct
i would redownload rom and sbf compare md5s
reflash rom and/or sbf
Sent from my DROID X2 using xda premium
---------- Post added at 08:49 PM ---------- Previous post was at 08:17 PM ----------
your friend didn't try the Macguiver stripped usb cable battery charging method did he?
Sent from my DROID X2 using xda premium
sd_shadow said:
rom or sbf may not have installed correct
i would redownload rom and sbf compare md5s
reflash rom and/or sbf
Sent from my DROID X2 using xda premium
---------- Post added at 08:49 PM ---------- Previous post was at 08:17 PM ----------
your friend didn't try the Macguiver stripped usb cable battery charging method did he?
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Yeah he try the Macguiver method . What does that mean? is there a way to fix it
he may have damaged phone, no fix if he did
buy a spare battery charger from ebay or Amazon for $5
Sent from my DROID X2 using xda premium
sd_shadow said:
he may have damaged phone, no fix if he did
buy a spare battery charger from ebay or Amazon for $5
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Okay ill do that. Its there an app that could tell me the battery pecentage cause its always stuck in the same number on my home
you can try wiping battery stats in cwm
i like battery left
but it likely will not work, for the same reason the the stock indicator does not
Related
hellppppp please i have a nexus s (gsm) on 2.3.4 .. i had rooted it with the one root v3 then i unrooted it with the same program but now it says its a nexus s 4g and im stuck and have no service PLEASE HELPPPPPPP
Go to the development section download the stock rom and radio and flash em!
ok is there anyway u can send me links cause i have no idea what u just told me to do
Go here: http://forum.xda-developers.com/showthread.php?t=1060192
that will get you on stock 2.3.4 and flash the radio as well. I'm assuming you have clockwork recovery installed?
i did it and it restarted but it wont go back to load up its stuck on the nexus s loading screen
skm1892 said:
i did it and it restarted but it wont go back to load up its stuck on the nexus s loading screen
Click to expand...
Click to collapse
Looks like it is time for Odin.
Sent from my Nexus S 4G using xda premium
help
whats odin and how do i use it/ do it
Do you have clockworkmod recovery??
If you have it try to restore your previous rom!!
Sent from my Nexus S using XDA Premium App
i have clock works and how do i restore previous rom?
Sounds like you need to do some reading. Looks like you were not very prepared. Read the roms,kernel, and root guide that is stickied.
Sent from my Nexus S 4G using xda premium
ok
i really really need to put 2.3.4 nexus s on my nexus s but it has 2.3.4 nexus s 4g on my phone how do i fix it? do i needd to root it or not explain please
---------- Post added at 10:27 PM ---------- Previous post was at 10:09 PM ----------
i GOT IT TO WORK YESSSSSSSSSSSSSSS not screwing again .. never going to screw around with this again
skm1892 said:
i really really need to put 2.3.4 nexus s on my nexus s but it has 2.3.4 nexus s 4g on my phone how do i fix it? do i needd to root it or not explain please
---------- Post added at 10:27 PM ---------- Previous post was at 10:09 PM ----------
i GOT IT TO WORK YESSSSSSSSSSSSSSS not screwing again .. never going to screw around with this again
Click to expand...
Click to collapse
Or you could learn about what you are doing BEFORE you do it.
Sent from my Nexus S 4G using xda premium
No reason to never try again, you have just learned a valuable lesson in reading before doing something your unsure about
Sent from my Nexus S 4G using Tapatalk
Dont forget to wipe data,cache partition,and dalvik cache through cwm. And you're ready to flash with 2.3.4 stock rom.
Sent from my Nexus S using xda premium
Rem3Dy said:
Or you could learn about what you are doing BEFORE you do it.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
just read a crap load first next time
hello every one i am casper i need help plz to unbrick my driod 2 verizon
i try to put cm7 on it and when i did that it just want soft brick it can go to bootloader but on the rsd lite it dose not show my phone and how do i get the software to put it back on i would love help i use my phone ll the time to talk to my kids
Ok I found out what to do but in boot loader it tells me Battery is low
Sent from my SGH-I897 using XDA
Plz help me fix
Sent from my SGH-I897 using XDA
buy a $5 spare battery charger like http://www.amazon.com/MOTOROLA-Droi...=UTF8&qid=1338740850&sr=1-6&tag=5336653508-20
edit: what is phone doing, bootlooping, did you try wiping data in stock android recovery
http://droid.koumakan.jp/wiki/Android_Recovery
if white light next to usb port, comes on, it's charging
I fig it out but after I us rad it gives me era 047 so whats mean
Sent from my SGH-I897 using XDA
Rsd
Sent from my SGH-I897 using XDA
not sure
what versions of rsd lite, sbf, moto drivers
compare md5 check sums
check out ezSBF
READ http://droid.koumakan.jp/wiki/Welcome
Sent from my DROID X2 using xda premium
Ok I had it then when at 99% it tells me code corrupt so no what
Sent from my SGH-I897 using XDA
not sure
which versions of rsd lite, sbf, moto drivers
compare md5 check sums
---------- Post added at 05:44 PM ---------- Previous post was at 05:40 PM ----------
which SBF are you using?
Ok bit that issue I need a up to date sbf up to date Droid 2 global verizon
Sent from my SGH-I897 using XDA
Up to date software
Sent from my SGH-I897 using XDA
which version are you trying to flash?
---------- Post added at 06:42 PM ---------- Previous post was at 06:25 PM ----------
use the 4.5.608, not the 4.5.629
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
this is easier if you say what versions you are using
RSD Lite 5.6?
moto drivers 5.2?
---------- Post added at 07:07 PM ---------- Previous post was at 06:55 PM ----------
if you are on t-mobile, did you have to band unlock
you may want to flash with ezSBF, it may not flash over the radio
i did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd now when i did rsd lite i use 4.9 i think it was but i had to get drivers for all that now on rsd it tells me faild to flash interface i think that's what it means and the sbf i was useing for rsd was this 1FF-p3_droid2we_cdma_droid2we-user-2.3.4-4.5.1_57_D2GA-59-120117-test-keys-signed-Verizon-US not only that i have driver detective and it tells me this that i need motorola flash interface s flash omap3630 mi i dont know if i got to have that your not its in bootloader but it tells me code bad you know what i mean
Hey can I look at my post plz it tells I more on what's going on think I so far for trying to help your cool
Sent from my SGH-I897 using XDA
code bad or MEM-MAP Blank error?
moto drivers 5.2
---------- Post added at 10:33 PM ---------- Previous post was at 10:29 PM ----------
did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd now when i did
Click to expand...
Click to collapse
you may not have waited long enough
---------- Post added at 10:41 PM ---------- Previous post was at 10:33 PM ----------
i did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd
Click to expand...
Click to collapse
did you see this
Live CD Instructions (Windows):
Download 1KDStaz0.x.iso
Burn iso image to a disk (Instructions, Windows 7 - Vista and XP)
Reboot PC
Hit F12 (sometimes F8 or esc) during boot to go to boot menu (possibly google search how to boot your specific pc from CDROM)
Select boot from CDROM
Hit enter at the yellow "boot baby... boot" screen
You will see yellow dots for 3-5 minutes then the script will start
Hit cancel at the sound card check
Click to expand...
Click to collapse
Can it be DVD r
Sent from my SGH-I897 using XDA
yes it can
Sent from my DROID X2 using xda premium
but may not work, now that you tried 4.5.629
Sent from my DROID X2 using xda premium
Sent from my SGH-I897 using XDA
Sent from my SGH-I897 using XDA
I have looked all over the internet for a stock Froyo .sbf for my Droid 2 and every link I can find is too old or broken. Does anyone have this and can you help me out and link it to me? Thanks in advance!
my list
Droid 2 (a955)
VRZ_A955_2.3.20_1FF_01.sbf.gz
ezSBF D2 2.3.20
https://sites.google.com/site/motosbf/droid-2-sbf-files
sd_shadow said:
my list
Droid 2 (a955)
VRZ_A955_2.3.20_1FF_01.sbf.gz
ezSBF D2 2.3.20
https://sites.google.com/site/motosbf/droid-2-sbf-files
Click to expand...
Click to collapse
When I install using the cd my phone won't boot into recovery holding the power button down and the X. Any idea why?
when you see android andy, ! & triangle
press both volume buttons
Sent from my XT862 using xda premium
sd_shadow said:
when you see android andy, ! & triangle
press both volume buttons
Sent from my XT862 using xda premium
Click to expand...
Click to collapse
I never even get to that point. It goes straight to bootloader and says connect usb data cable.
what else does it say
sd_shadow said:
what else does it say
Click to expand...
Click to collapse
Bootloader
D2.37
Err:A5,70,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to Program
Connect USB
Data Cable
like errors, mem blank
Sent from my XT862 using xda premium
---------- Post added at 07:47 PM ---------- Previous post was at 07:44 PM ----------
yes you had 2.3.4 installed, you can not go back
just flash 2.3.4 ezSBF for d2
magic md5 root for d2, d2g, dx, & dx2
https://docs.google.com/document/d/1-Oj1a1wNZKhZMPUqU_6KzzYzQJ2RKzvvumTx-41f3h4/edit
Sent from my XT862 using xda premium
Burning Droid2_621_SBF-and-RootCD.iso to a disc right now. I'll let you know how it goes.
Phone is up and running now with 2.3.4 and rooted. Only problem is that it says my battery is invalid and cannot be charged.
did you charge battery with stripped usb or charger wires, direct to battery connections?
Yea )=
you likely fried your phone
no fix that I know of, could try replacing battery
Please HELP!
I flashed a new custom rom but something went wrong and when i rebooted a didnt see anything on the screen :S I have nothing on the screen since that, but I can flash any stock rom with RSD lite. After flashing the phone can't boot :S
The backlight works, but nothing appears on the screen. I have flashed about 5 different roms. Nothing changed. :S But for one there was an infinite motorola logo(for 3 hours) so i believe the LCD works. :S (i have 2 batteries and an outer charger so its not a problem)
What should I do?
Thanks for help!
Flash the one that worked once again, after flashing go-to stock recovery(power+vol down) and wipe data, and it should boot
Sent from my MB526 using xda premium
hackergnome said:
Flash the one that worked once again, after flashing go-to stock recovery(power+vol down) and wipe data, and it should boot
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I'll try tomorrow but the problem is that the recovery does not appear on the screen :S
marci9464 said:
I'll try tomorrow but the problem is that the recovery does not appear on the screen :S
Click to expand...
Click to collapse
It should once you flash a working ROM.
Sent from my MB526 using Tapatalk 4 Beta
hackergnome said:
It should once you flash a working ROM.
Sent from my MB526 using Tapatalk 4 Beta
Click to expand...
Click to collapse
I have tried to flash 5 stock roms again and still nothing :S I cant get to the recovery. I only have black screen with backlight on with simple power button, with power + vol up and with power + vol. down as well :S
Any ideas?
Which ROM was previously working for you? you need to flash that one? The one which was bootlooping.
Sent from my MB526 using Tapatalk 4 Beta
---------- Post added at 09:47 AM ---------- Previous post was at 09:45 AM ----------
Black screen occurs when you downgrade, you need to find the ROM with correct bootloader version, by hit and trial.
Sent from my MB526 using Tapatalk 4 Beta
all doewsR
What ROMs did you tried? I.e. what is the your current BL?
hackergnome said:
Which ROM was previously working for you? you need to flash that one? The one which was bootlooping.
Sent from my MB526 using Tapatalk 4 Beta
---------- Post added at 09:47 AM ---------- Previous post was at 09:45 AM ----------
Black screen occurs when you downgrade, you need to find the ROM with correct bootloader version, by hit and trial.
Sent from my MB526 using Tapatalk 4 Beta
Click to expand...
Click to collapse
If you're not sure about bl then you can flash dfp 231. It will get the phone booting. If you have a green lens defy then camera will not work on gingerbread based roms!
Sent from my MB526 using Tapatalk 2
So it turnd out that the screen was wrong :S I have changed the LCD and since that i have no problem. It was not cheap but at least it works
Thanks for your help!
Please help screwed up with my phone !!!!!!!!!!!!!!!
I tried custom rom with cm-7-20130301-NIGHTLY-jordan.zip but stucked with Motorola M symbol the i tried Custom Rom with http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/ (09-Jul-2013 15:59 168M) and http://goo.im/gapps .it worked i mean installed but facing problem with bluetooth and pattern lock(all security type pin ,password,pattern were not working) and most importantly incoming call was not coming so i try to install cm-7-20130301-NIGHTLY-jordan.zip again then after i rebooted my phone then again stucked with Motorola M symbol .Then remove battery and restart again but blue flash light is not coming and then only able to enter motorola boot option (reboot, apply recovery, wipe data and wipe cach) then i entered into recovery then update from sd card (this file i have selected http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/[/url] (09-Jul-2013 15:59 168M) but getting signature failed error and now my battery is not even charging getting in boot option battey low cannot load program ...please help me what can i do ..any chance to get alive my phone ....thanks in advance ...
To fix your battery use McGyver method of charging (search for it). Then flash defy+ sbf using rsdlite. Then root and install 2ndinit again. You used defy ROM on defy+, that's why those problems were occurring.
Sent from my MB526 using xda app-developers app
hotdog125 said:
To fix your battery use McGyver method of charging (search for it). Then flash defy+ sbf using rsdlite. Then root and install 2ndinit again. You used defy ROM on defy+, that's why those problems were occurring.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
getting error while flashing SBF with rsdlite (DFPRC_U_4.5.3-109_DPP-14-17_SIGNED_USADEFYPRCB1B50AA00A.0R_JRDNGIBRRTGC_P027_A024_HWp3a_Service1FF.sbf) it is Retailcchinese sbf for defy +....would you please tell me from which SBF i have to flash to alive my defy +.
Try retail Taiwanese.
Sent from my MB526 using xda app-developers app
hotdog125 said:
Try retail Taiwanese.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
thanks for support.now it's working with chineseRetail some how i manage this then i try to install custom rom cm-7-20130301-NIGHTLY-jordan_plus-signed.zip and it 's not working though it's for defy + .can you please provide me stable working Custom Rom for defy + (preferred JELLY BEAN) .Earlier i have tried http://quarx2k.ru/cm10.1-nightly-defy+/2.6.32/ (09-Jul-2013 15:59 168M) and http://goo.im/gapps in this version ,pattern lock , Incoming call ,bluetooth were not working .
Try CM10.1 again. But use only minimal gapps.
Sent from my MB526 using xda app-developers app
---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------
Use minimal gapps ONLY for CM10.1. You used full gapps which resulted in those problems.
Sent from my MB526 using xda app-developers app
hotdog125 said:
Try CM10.1 again. But use only minimal gapps.
Sent from my MB526 using xda app-developers app
---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------
Use minimal gapps ONLY for CM10.1. You used full gapps which resulted in those problems.
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
The Latest 17september is for CM10.2 (http://quarx2k.ru/) ,will be ok with minimal gapps ( gapps-jb-20120726-mi..> 26-Jul-2012 21:19 11M ) .I mean after installing this verison incoming call,pattern lock and bluetooth will be worked ?