hello every one i am casper i need help plz to unbrick my driod 2 verizon
i try to put cm7 on it and when i did that it just want soft brick it can go to bootloader but on the rsd lite it dose not show my phone and how do i get the software to put it back on i would love help i use my phone ll the time to talk to my kids
Ok I found out what to do but in boot loader it tells me Battery is low
Sent from my SGH-I897 using XDA
Plz help me fix
Sent from my SGH-I897 using XDA
buy a $5 spare battery charger like http://www.amazon.com/MOTOROLA-Droi...=UTF8&qid=1338740850&sr=1-6&tag=5336653508-20
edit: what is phone doing, bootlooping, did you try wiping data in stock android recovery
http://droid.koumakan.jp/wiki/Android_Recovery
if white light next to usb port, comes on, it's charging
I fig it out but after I us rad it gives me era 047 so whats mean
Sent from my SGH-I897 using XDA
Rsd
Sent from my SGH-I897 using XDA
not sure
what versions of rsd lite, sbf, moto drivers
compare md5 check sums
check out ezSBF
READ http://droid.koumakan.jp/wiki/Welcome
Sent from my DROID X2 using xda premium
Ok I had it then when at 99% it tells me code corrupt so no what
Sent from my SGH-I897 using XDA
not sure
which versions of rsd lite, sbf, moto drivers
compare md5 check sums
---------- Post added at 05:44 PM ---------- Previous post was at 05:40 PM ----------
which SBF are you using?
Ok bit that issue I need a up to date sbf up to date Droid 2 global verizon
Sent from my SGH-I897 using XDA
Up to date software
Sent from my SGH-I897 using XDA
which version are you trying to flash?
---------- Post added at 06:42 PM ---------- Previous post was at 06:25 PM ----------
use the 4.5.608, not the 4.5.629
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
this is easier if you say what versions you are using
RSD Lite 5.6?
moto drivers 5.2?
---------- Post added at 07:07 PM ---------- Previous post was at 06:55 PM ----------
if you are on t-mobile, did you have to band unlock
you may want to flash with ezSBF, it may not flash over the radio
i did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd now when i did rsd lite i use 4.9 i think it was but i had to get drivers for all that now on rsd it tells me faild to flash interface i think that's what it means and the sbf i was useing for rsd was this 1FF-p3_droid2we_cdma_droid2we-user-2.3.4-4.5.1_57_D2GA-59-120117-test-keys-signed-Verizon-US not only that i have driver detective and it tells me this that i need motorola flash interface s flash omap3630 mi i dont know if i got to have that your not its in bootloader but it tells me code bad you know what i mean
Hey can I look at my post plz it tells I more on what's going on think I so far for trying to help your cool
Sent from my SGH-I897 using XDA
code bad or MEM-MAP Blank error?
moto drivers 5.2
---------- Post added at 10:33 PM ---------- Previous post was at 10:29 PM ----------
did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd now when i did
Click to expand...
Click to collapse
you may not have waited long enough
---------- Post added at 10:41 PM ---------- Previous post was at 10:33 PM ----------
i did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd
Click to expand...
Click to collapse
did you see this
Live CD Instructions (Windows):
Download 1KDStaz0.x.iso
Burn iso image to a disk (Instructions, Windows 7 - Vista and XP)
Reboot PC
Hit F12 (sometimes F8 or esc) during boot to go to boot menu (possibly google search how to boot your specific pc from CDROM)
Select boot from CDROM
Hit enter at the yellow "boot baby... boot" screen
You will see yellow dots for 3-5 minutes then the script will start
Hit cancel at the sound card check
Click to expand...
Click to collapse
Can it be DVD r
Sent from my SGH-I897 using XDA
yes it can
Sent from my DROID X2 using xda premium
but may not work, now that you tried 4.5.629
Sent from my DROID X2 using xda premium
Sent from my SGH-I897 using XDA
Sent from my SGH-I897 using XDA
Related
hellppppp please i have a nexus s (gsm) on 2.3.4 .. i had rooted it with the one root v3 then i unrooted it with the same program but now it says its a nexus s 4g and im stuck and have no service PLEASE HELPPPPPPP
Go to the development section download the stock rom and radio and flash em!
ok is there anyway u can send me links cause i have no idea what u just told me to do
Go here: http://forum.xda-developers.com/showthread.php?t=1060192
that will get you on stock 2.3.4 and flash the radio as well. I'm assuming you have clockwork recovery installed?
i did it and it restarted but it wont go back to load up its stuck on the nexus s loading screen
skm1892 said:
i did it and it restarted but it wont go back to load up its stuck on the nexus s loading screen
Click to expand...
Click to collapse
Looks like it is time for Odin.
Sent from my Nexus S 4G using xda premium
help
whats odin and how do i use it/ do it
Do you have clockworkmod recovery??
If you have it try to restore your previous rom!!
Sent from my Nexus S using XDA Premium App
i have clock works and how do i restore previous rom?
Sounds like you need to do some reading. Looks like you were not very prepared. Read the roms,kernel, and root guide that is stickied.
Sent from my Nexus S 4G using xda premium
ok
i really really need to put 2.3.4 nexus s on my nexus s but it has 2.3.4 nexus s 4g on my phone how do i fix it? do i needd to root it or not explain please
---------- Post added at 10:27 PM ---------- Previous post was at 10:09 PM ----------
i GOT IT TO WORK YESSSSSSSSSSSSSSS not screwing again .. never going to screw around with this again
skm1892 said:
i really really need to put 2.3.4 nexus s on my nexus s but it has 2.3.4 nexus s 4g on my phone how do i fix it? do i needd to root it or not explain please
---------- Post added at 10:27 PM ---------- Previous post was at 10:09 PM ----------
i GOT IT TO WORK YESSSSSSSSSSSSSSS not screwing again .. never going to screw around with this again
Click to expand...
Click to collapse
Or you could learn about what you are doing BEFORE you do it.
Sent from my Nexus S 4G using xda premium
No reason to never try again, you have just learned a valuable lesson in reading before doing something your unsure about
Sent from my Nexus S 4G using Tapatalk
Dont forget to wipe data,cache partition,and dalvik cache through cwm. And you're ready to flash with 2.3.4 stock rom.
Sent from my Nexus S using xda premium
Rem3Dy said:
Or you could learn about what you are doing BEFORE you do it.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
just read a crap load first next time
So I rooted my friends Droid 2 that's what's in firmware 2.3.4 . I used the method in rootwikiz with the bootable CD. After that I install bootstrap recovery and flash the new AOKP v39 beta. So after that phone bootup and everything fine but the battery won't charge. So I try another battery and phone boot up but the other battery won't go down. Its stuck at 100%. It won't charge the other battery. Or light up when I connected to charge
Can you help me
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
rom or sbf may not have installed correct
i would redownload rom and sbf compare md5s
reflash rom and/or sbf
Sent from my DROID X2 using xda premium
---------- Post added at 08:49 PM ---------- Previous post was at 08:17 PM ----------
your friend didn't try the Macguiver stripped usb cable battery charging method did he?
Sent from my DROID X2 using xda premium
sd_shadow said:
rom or sbf may not have installed correct
i would redownload rom and sbf compare md5s
reflash rom and/or sbf
Sent from my DROID X2 using xda premium
---------- Post added at 08:49 PM ---------- Previous post was at 08:17 PM ----------
your friend didn't try the Macguiver stripped usb cable battery charging method did he?
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Yeah he try the Macguiver method . What does that mean? is there a way to fix it
he may have damaged phone, no fix if he did
buy a spare battery charger from ebay or Amazon for $5
Sent from my DROID X2 using xda premium
sd_shadow said:
he may have damaged phone, no fix if he did
buy a spare battery charger from ebay or Amazon for $5
Sent from my DROID X2 using xda premium
Click to expand...
Click to collapse
Okay ill do that. Its there an app that could tell me the battery pecentage cause its always stuck in the same number on my home
you can try wiping battery stats in cwm
i like battery left
but it likely will not work, for the same reason the the stock indicator does not
hello
i've been trying to root my phone for more than 3 days now with no luck. every time with every version of super1click it hangs on step 7 "waiting for the device". i've set on background settings and enable debugging mode and still nothing. i've downloaded huawei's huitsuit (or sth like that) for drivers. could someone help me? i've rooted my phone more than 10 times it's the first time that i'm facing such a problem
Try this:
1)Dial:*#*#2846579#*#*
2)Go to project menu>log switch>set log ON
3)reboot phone
4)Enable debugging mode
5)run super one click.
That should definetly work.
Sent from my U8800 using xda app-developers app
---------- Post added at 02:59 PM ---------- Previous post was at 02:57 PM ----------
Edit: after reboot enable debuging mode.
Sent from my U8800 using xda app-developers app
kenwaweru said:
Try this:
1)Dial:*#*#2846579#*#*
2)Go to project menu>log switch>set log ON
3)reboot phone
4)Enable debugging mode
5)run super one click.
That should definetly work.
Sent from my U8800 using xda app-developers app
---------- Post added at 02:59 PM ---------- Previous post was at 02:57 PM ----------
Edit: after reboot enable debuging mode.
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
thanks but i've already done this and didn't work. the problem was that i went from aurora str8 to stock gingerbread. i installed official
2.2 and then 2.3.5 and superoneclick worked!
I've searched, but only found the complete instructions, not just to start where I am now...
I have a "like new" LG G2 that I bought. It came unlocked and rooted with CyanogenMod. Without having done the rooting myself from the beginning, I'm not sure what all I need. Can someone tell me (or point to the correct thread) what I need to load to my phone to be able to flash another ROM if I'd like?
I'd like to go the a clean AT&T ROM, or another possibly. I have confirmed that it is rooted and unlocked. It's been a couple of years since I've rooted anything. The phone came with terminal emulator on it, but that's it other than the standard apps.
Thx up front for any help
tomemail said:
I've searched, but only found the complete instructions, not just to start where I am now...
I have a "like new" LG G2 that I bought. It came unlocked and rooted with CyanogenMod. Without having done the rooting myself from the beginning, I'm not sure what all I need. Can someone tell me (or point to the correct thread) what I need to load to my phone to be able to flash another ROM if I'd like?
I'd like to go the a clean AT&T ROM, or another possibly. I have confirmed that it is rooted and unlocked. It's been a couple of years since I've rooted anything. The phone came with terminal emulator on it, but that's it other than the standard apps.
Thx up front for any help
Click to expand...
Click to collapse
You should have everything that you "need" if there is a custom ROM on there. Download clean ROM and the gapps and follow how they want you to install it.
Reboot into recovery and wipe your data. Then flash the ROM zip file, then gapps
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
Never wipe internal data
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:15 PM ---------- Previous post was at 04:13 PM ----------
Also either make a backup in your recovery or download nandroid. Always keep a backup of a working ROM installed. In case you download a borked zip filw
Sent from my VS980 4G using xda app-developers app
Lawlrus said:
You should have everything that you "need" if there is a custom ROM on there. Download clean ROM and the gapps and follow how they want you to install it.
Reboot into recovery and wipe your data. Then flash the ROM zip file, then gapps
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
Never wipe internal data
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:15 PM ---------- Previous post was at 04:13 PM ----------
Also either make a backup in your recovery or download nandroid. Always keep a backup of a working ROM installed. In case you download a borked zip filw
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Thx for the quick reply...
I downloaded ROM Manager and apparently already have TWRP.
I should do it all from my phone then?
Thank Again!
Yes. If you can't hold the power button and boot into recovery (on some cm Roms you need to activate advanced boot in Dev options) I used ROM toolbox lite. For making back ups. Freezing apps, and there is a button you can click on to boot into recovery.
For whatever reason. Going into twrp and trying to make a back up with never work. But when I would use ROM toolbox and click on make a backup there, they all restored flawlessly
Sent from my VS980 4G using xda app-developers app
---------- Post added at 05:11 PM ---------- Previous post was at 05:07 PM ----------
Just boot into recovery and flash away. Always back up and never wipe internal data and you should be good to go.
I always made sure I kept a working ROM zip file downloaded as well. If you wipe and go to install a zip and it is borked. And your backup some how gets corrupted, you will always have that third option before having to push a ROM or factory reset.
Sent from my VS980 4G using xda app-developers app
Lawlrus said:
Yes. If you can't hold the power button and boot into recovery (on some cm Roms you need to activate advanced boot in Dev options) I used ROM toolbox lite. For making back ups. Freezing apps, and there is a button you can click on to boot into recovery.
For whatever reason. Going into twrp and trying to make a back up with never work. But when I would use ROM toolbox and click on make a backup there, they all restored flawlessly
Sent from my VS980 4G using xda app-developers app
---------- Post added at 05:11 PM ---------- Previous post was at 05:07 PM ----------
Just boot into recovery and flash away. Always back up and never wipe internal data and you should be good to go.
I always made sure I kept a working ROM zip file downloaded as well. If you wipe and go to install a zip and it is borked. And your backup some how gets corrupted, you will always have that third option before having to push a ROM or factory reset.
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Excellent!
Appreciate it Lawlrus
Lawlrus said:
You should have everything that you "need" if there is a custom ROM on there. Download clean ROM and the gapps and follow how they want you to install it.
Reboot into recovery and wipe your data. Then flash the ROM zip file, then gapps
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
Never wipe internal data
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:15 PM ---------- Previous post was at 04:13 PM ----------
Also either make a backup in your recovery or download nandroid. Always keep a backup of a working ROM installed. In case you download a borked zip filw
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Ok, so everything worked perfectly on the flashing. All is good to go and very happy...!
I have added about 2gb of data to the phone. LG G2 with 32gb total. I have about 18.6gb free space left...is that typical, or do you believe I have a lot of extra debris that I should remove from internal storage?
Thx Again
Yo
Everywhere i search to find a working download link to the latest one done by @Rainbow_Dash i cant find it, someone link up i wanna swich from this TW to.
DUCE.
PM me
Sent from my SM-G928F using XDA Labs
---------- Post added at 12:25 PM ---------- Previous post was at 12:23 PM ----------
asokhaki said:
Yo
Everywhere i search to find a working download link to the latest one done by @Rainbow_Dash i cant find it, someone link up i wanna swich from this TW to.
DUCE.
Click to expand...
Click to collapse
Pm me, not sure if you can see these O.O.
App cleanup on aisle 4.
Sent from my SM-G928F using XDA Labs