superoneclick hangs on step 7 - Huawei Ideos X5 U8800

hello
i've been trying to root my phone for more than 3 days now with no luck. every time with every version of super1click it hangs on step 7 "waiting for the device". i've set on background settings and enable debugging mode and still nothing. i've downloaded huawei's huitsuit (or sth like that) for drivers. could someone help me? i've rooted my phone more than 10 times it's the first time that i'm facing such a problem

Try this:
1)Dial:*#*#2846579#*#*
2)Go to project menu>log switch>set log ON
3)reboot phone
4)Enable debugging mode
5)run super one click.
That should definetly work.
Sent from my U8800 using xda app-developers app
---------- Post added at 02:59 PM ---------- Previous post was at 02:57 PM ----------
Edit: after reboot enable debuging mode.
Sent from my U8800 using xda app-developers app

kenwaweru said:
Try this:
1)Dial:*#*#2846579#*#*
2)Go to project menu>log switch>set log ON
3)reboot phone
4)Enable debugging mode
5)run super one click.
That should definetly work.
Sent from my U8800 using xda app-developers app
---------- Post added at 02:59 PM ---------- Previous post was at 02:57 PM ----------
Edit: after reboot enable debuging mode.
Sent from my U8800 using xda app-developers app
Click to expand...
Click to collapse
thanks but i've already done this and didn't work. the problem was that i went from aurora str8 to stock gingerbread. i installed official
2.2 and then 2.3.5 and superoneclick worked!

Related

[Q] need help plz to un brick my droid 2 verizon

hello every one i am casper i need help plz to unbrick my driod 2 verizon
i try to put cm7 on it and when i did that it just want soft brick it can go to bootloader but on the rsd lite it dose not show my phone and how do i get the software to put it back on i would love help i use my phone ll the time to talk to my kids
Ok I found out what to do but in boot loader it tells me Battery is low
Sent from my SGH-I897 using XDA
Plz help me fix
Sent from my SGH-I897 using XDA
buy a $5 spare battery charger like http://www.amazon.com/MOTOROLA-Droi...=UTF8&qid=1338740850&sr=1-6&tag=5336653508-20
edit: what is phone doing, bootlooping, did you try wiping data in stock android recovery
http://droid.koumakan.jp/wiki/Android_Recovery
if white light next to usb port, comes on, it's charging
I fig it out but after I us rad it gives me era 047 so whats mean
Sent from my SGH-I897 using XDA
Rsd
Sent from my SGH-I897 using XDA
not sure
what versions of rsd lite, sbf, moto drivers
compare md5 check sums
check out ezSBF
READ http://droid.koumakan.jp/wiki/Welcome
Sent from my DROID X2 using xda premium
Ok I had it then when at 99% it tells me code corrupt so no what
Sent from my SGH-I897 using XDA
not sure
which versions of rsd lite, sbf, moto drivers
compare md5 check sums
---------- Post added at 05:44 PM ---------- Previous post was at 05:40 PM ----------
which SBF are you using?
Ok bit that issue I need a up to date sbf up to date Droid 2 global verizon
Sent from my SGH-I897 using XDA
Up to date software
Sent from my SGH-I897 using XDA
which version are you trying to flash?
---------- Post added at 06:42 PM ---------- Previous post was at 06:25 PM ----------
use the 4.5.608, not the 4.5.629
---------- Post added at 06:55 PM ---------- Previous post was at 06:42 PM ----------
this is easier if you say what versions you are using
RSD Lite 5.6?
moto drivers 5.2?
---------- Post added at 07:07 PM ---------- Previous post was at 06:55 PM ----------
if you are on t-mobile, did you have to band unlock
you may want to flash with ezSBF, it may not flash over the radio
i did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd now when i did rsd lite i use 4.9 i think it was but i had to get drivers for all that now on rsd it tells me faild to flash interface i think that's what it means and the sbf i was useing for rsd was this 1FF-p3_droid2we_cdma_droid2we-user-2.3.4-4.5.1_57_D2GA-59-120117-test-keys-signed-Verizon-US not only that i have driver detective and it tells me this that i need motorola flash interface s flash omap3630 mi i dont know if i got to have that your not its in bootloader but it tells me code bad you know what i mean
Hey can I look at my post plz it tells I more on what's going on think I so far for trying to help your cool
Sent from my SGH-I897 using XDA
code bad or MEM-MAP Blank error?
moto drivers 5.2
---------- Post added at 10:33 PM ---------- Previous post was at 10:29 PM ----------
did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd now when i did
Click to expand...
Click to collapse
you may not have waited long enough
---------- Post added at 10:41 PM ---------- Previous post was at 10:33 PM ----------
i did that ez sbf but my pc wont let me after the line's go away it go to this wierd **** were i cant use keyboerd
Click to expand...
Click to collapse
did you see this
Live CD Instructions (Windows):
Download 1KDStaz0.x.iso
Burn iso image to a disk (Instructions, Windows 7 - Vista and XP)
Reboot PC
Hit F12 (sometimes F8 or esc) during boot to go to boot menu (possibly google search how to boot your specific pc from CDROM)
Select boot from CDROM
Hit enter at the yellow "boot baby... boot" screen
You will see yellow dots for 3-5 minutes then the script will start
Hit cancel at the sound card check
Click to expand...
Click to collapse
Can it be DVD r
Sent from my SGH-I897 using XDA
yes it can
Sent from my DROID X2 using xda premium
but may not work, now that you tried 4.5.629
Sent from my DROID X2 using xda premium
Sent from my SGH-I897 using XDA
Sent from my SGH-I897 using XDA

Stock with kernel rom

Sorry guys if this is a stupid question I am a total newbie to android I am on stock 4.2.1 is it possible to just install the Franco kernel and to do this I would have to
Unlock boot loader
Root the phone
Install custom recovery and then flash the kernel am I right guys
Thanks in advance for your help
Sent from my Nexus 4 using xda app-developers app
Yup although rooting isn't 100% necessary but it is highly recommended. Also rooting comes after flashing the custom recovery since you need that in order to root.
Sent from my Nexus 4 using xda app-developers app
bash156 said:
Sorry guys if this is a stupid question I am a total newbie to android I am on stock 4.2.1 is it possible to just install the Franco kernel and to do this I would have to
Unlock boot loader
Root the phone
Install custom recovery and then flash the kernel am I right guys
Thanks in advance for your help
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I'm new to Android as well. This link helped me out a LOT:
http://www.addictivetips.com/android/root-google-nexus-4-install-clockworkmod-recovery/
Once you're rooted and have CWM installed, it's as simple as downloading the kernel (I recommend franco) and then go into recovery mode, install zip from sdcard, and viola you are done!
---------- Post added at 12:10 PM ---------- Previous post was at 12:08 PM ----------
Also remember when you unlock the bootloader its going to wipe out your phone
---------- Post added at 12:15 PM ---------- Previous post was at 12:10 PM ----------
This is another good link as well http://forum.xda-developers.com/showthread.php?t=2018179
Thanks guys for your help and the quick response much appreciated hoping improve my battery life
Regards
Sent from my Nexus 4 using xda app-developers app

Has anyone gotten the Insufficient storage error yet?

I just got it on mine, 2.61GB Available storage. Does anyone know how to clear up this error? its quite annoying. I tried going through my system but couldnt find a .Odex file or anything...
RunningFreeGS4 v2.0 thanks
Thanks
What apps were you running at the time?
Sent from my SPH-L720 using xda premium
---------- Post added at 09:05 PM ---------- Previous post was at 09:04 PM ----------
Maybe you might have been trying to download a big file.
Sent from my SPH-L720 using xda premium
nicotheandroidguy said:
What apps were you running at the time?
Sent from my SPH-L720 using xda premium
---------- Post added at 09:05 PM ---------- Previous post was at 09:04 PM ----------
Maybe you might have been trying to download a big file.
Sent from my SPH-L720 using xda premium
Click to expand...
Click to collapse
BlackMarket, nova launcher. i think thats it
I to am getting this error and have no idea on how to fix it. I have cleared both caches. If it helps I'm rooted on MDC and have the oedex wifi mod installed.
I got that error for one application when it was trying to be updated in the Play store - Android Tuner. I got around it by using ES explorer and deleting the odex file then reattempting app update.
I have 6.2 GB free and I am unable to update or install apps.
I have wiped dalvik and rebooted.
Update: this is apparently only an issue for updating apps. Also if I unistall and try to reinstall it will throw the error message.
I had installed Modern Combat 4 but it ate up my storage. I uninstalled and move clockwork and all my cached wallpapers to the sd card.
The apps that I'm currently experiencing this issue with are google drive and vine.
Sent from my SPH-L720 using xda premium
Only workaround I could find was a total wipe and reflash.
Sent from my SPH-L720 using xda premium
I had a feeling it was going to come down to having to do a flash and wipe

[Q] LG G2 Rooted & Unlocked & Lost...

I've searched, but only found the complete instructions, not just to start where I am now...
I have a "like new" LG G2 that I bought. It came unlocked and rooted with CyanogenMod. Without having done the rooting myself from the beginning, I'm not sure what all I need. Can someone tell me (or point to the correct thread) what I need to load to my phone to be able to flash another ROM if I'd like?
I'd like to go the a clean AT&T ROM, or another possibly. I have confirmed that it is rooted and unlocked. It's been a couple of years since I've rooted anything. The phone came with terminal emulator on it, but that's it other than the standard apps.
Thx up front for any help
tomemail said:
I've searched, but only found the complete instructions, not just to start where I am now...
I have a "like new" LG G2 that I bought. It came unlocked and rooted with CyanogenMod. Without having done the rooting myself from the beginning, I'm not sure what all I need. Can someone tell me (or point to the correct thread) what I need to load to my phone to be able to flash another ROM if I'd like?
I'd like to go the a clean AT&T ROM, or another possibly. I have confirmed that it is rooted and unlocked. It's been a couple of years since I've rooted anything. The phone came with terminal emulator on it, but that's it other than the standard apps.
Thx up front for any help
Click to expand...
Click to collapse
You should have everything that you "need" if there is a custom ROM on there. Download clean ROM and the gapps and follow how they want you to install it.
Reboot into recovery and wipe your data. Then flash the ROM zip file, then gapps
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
Never wipe internal data
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:15 PM ---------- Previous post was at 04:13 PM ----------
Also either make a backup in your recovery or download nandroid. Always keep a backup of a working ROM installed. In case you download a borked zip filw
Sent from my VS980 4G using xda app-developers app
Lawlrus said:
You should have everything that you "need" if there is a custom ROM on there. Download clean ROM and the gapps and follow how they want you to install it.
Reboot into recovery and wipe your data. Then flash the ROM zip file, then gapps
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
Never wipe internal data
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:15 PM ---------- Previous post was at 04:13 PM ----------
Also either make a backup in your recovery or download nandroid. Always keep a backup of a working ROM installed. In case you download a borked zip filw
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Thx for the quick reply...
I downloaded ROM Manager and apparently already have TWRP.
I should do it all from my phone then?
Thank Again!
Yes. If you can't hold the power button and boot into recovery (on some cm Roms you need to activate advanced boot in Dev options) I used ROM toolbox lite. For making back ups. Freezing apps, and there is a button you can click on to boot into recovery.
For whatever reason. Going into twrp and trying to make a back up with never work. But when I would use ROM toolbox and click on make a backup there, they all restored flawlessly
Sent from my VS980 4G using xda app-developers app
---------- Post added at 05:11 PM ---------- Previous post was at 05:07 PM ----------
Just boot into recovery and flash away. Always back up and never wipe internal data and you should be good to go.
I always made sure I kept a working ROM zip file downloaded as well. If you wipe and go to install a zip and it is borked. And your backup some how gets corrupted, you will always have that third option before having to push a ROM or factory reset.
Sent from my VS980 4G using xda app-developers app
Lawlrus said:
Yes. If you can't hold the power button and boot into recovery (on some cm Roms you need to activate advanced boot in Dev options) I used ROM toolbox lite. For making back ups. Freezing apps, and there is a button you can click on to boot into recovery.
For whatever reason. Going into twrp and trying to make a back up with never work. But when I would use ROM toolbox and click on make a backup there, they all restored flawlessly
Sent from my VS980 4G using xda app-developers app
---------- Post added at 05:11 PM ---------- Previous post was at 05:07 PM ----------
Just boot into recovery and flash away. Always back up and never wipe internal data and you should be good to go.
I always made sure I kept a working ROM zip file downloaded as well. If you wipe and go to install a zip and it is borked. And your backup some how gets corrupted, you will always have that third option before having to push a ROM or factory reset.
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Excellent!
Appreciate it Lawlrus
Lawlrus said:
You should have everything that you "need" if there is a custom ROM on there. Download clean ROM and the gapps and follow how they want you to install it.
Reboot into recovery and wipe your data. Then flash the ROM zip file, then gapps
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:13 PM ---------- Previous post was at 04:12 PM ----------
Never wipe internal data
Sent from my VS980 4G using xda app-developers app
---------- Post added at 04:15 PM ---------- Previous post was at 04:13 PM ----------
Also either make a backup in your recovery or download nandroid. Always keep a backup of a working ROM installed. In case you download a borked zip filw
Sent from my VS980 4G using xda app-developers app
Click to expand...
Click to collapse
Ok, so everything worked perfectly on the flashing. All is good to go and very happy...!
I have added about 2gb of data to the phone. LG G2 with 32gb total. I have about 18.6gb free space left...is that typical, or do you believe I have a lot of extra debris that I should remove from internal storage?
Thx Again

How do I flash my kindle into stock software? My backup was deleted!!

How can I put the software the kfhd came with back on using tarp I tried downloading the software zipping it and flashing but it says error pls help!!
Sent from my Amazon Kindle Fire HD using xda app-developers app
Just use kindle fire first aid, put the device in fastboot mode first, easy way of doing that is booting into twrp and hitting reboot>bootloader. From there kffa will restore the system to stock amazon rooted. Not sure if it restored stock recovery though.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Thanks do i need a fastboot cable plugged into my pc
Sent from my SCH-I535 using xda app-developers app
My computer doesnt read the device nor does KFFA in fastboot
Sent from my SCH-I535 using xda app-developers app
OK that is probably a driver issue, check the device manager for a device with a yellow triangle next to it and try updating its drivers to the ones in my signature. I can't stand using my kindle with windows, seems every time I go between cm, recovery, and fastboot I have to uninstall the device and let it reinstall it again.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
if you have twrp just download the flashable stock rom that hashcode made then let it update on its own. http://forum.xda-developers.com/showthread.php?t=2218475
Sent from my KFTT using xda app-developers app
Before beginning of any boot check bootloader 2nd installed correctly and everythings ok
---------- Post added at 03:31 PM ---------- Previous post was at 03:29 PM ----------
you can follow this link http://forum.xda-developers.com/show....php?t=2128848
Do i need to delete the otacerts? In the system etc folder its not updatig
Sent from my SCH-I535 using xda app-developers app
you don't need to delete it. only if you don't want it to update. you can go to amazon and follow the directions for a manual update.
Sent from my KFTT using xda app-developers app
Hinzman420 said:
if you have twrp just download the flashable stock rom that hashcode made then let it update on its own. http://forum.xda-developers.com/showthread.php?t=2218475
Sent from my KFTT using xda app-developers app
Click to expand...
Click to collapse
No, you don't want to do that. Those are only for the first flash as indicated in the OP.
---------- Post added at 10:03 PM ---------- Previous post was at 10:02 PM ----------
Hinzman420 said:
you don't need to delete it. only if you don't want it to update. you can go to amazon and follow the directions for a manual update.
Sent from my KFTT using xda app-developers app
Click to expand...
Click to collapse
You can't do that either. It don't work like that.
---------- Post added at 10:07 PM ---------- Previous post was at 10:03 PM ----------
bennyboy2120 said:
How can I put the software the kfhd came with back on using tarp I tried downloading the software zipping it and flashing but it says error pls help!!
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
Once you have flashed TWRP you can only return to stock using fastboot. Whether you use something like a system restore tool or just push the images in fastboot you still need to start with a fastboot cord.
1. Fastboot cord.
2. download system restore tool http://forum.xda-developers.com/showthread.php?t=1951254
3. You also need to download the SDK package and set paths in your environment for fastboot.exe and adb.exe. Here is a video tutorial to assist you with that. https://www.youtube.com/watch?v=oaNM-lt_aHw
ok you say it dont work but thats exactlly what i did and mine did just what i said i flashed hashcodes stock rom then let it update. the update took my root and recovery away. had no problems. but every kindle reacts differently to different things so i dont know what to say.
Sent from my KFTT using xda app-developers app
---------- Post added at 09:13 AM ---------- Previous post was at 08:59 AM ----------
also i think i used the 7.3.0 stock flashable rom. Also you if you can find the orignal thread for disabling ota updates there should be a script to enable the ota updates . you can try that. otherwise you are gonna have to use the fastboot cable and restore tool like linear equation said.
Sent from my KFTT using xda app-developers app
bennyboy2120 said:
Thanks do i need a fastboot cable plugged into my pc
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes

Categories

Resources