Related
GFAN_milestone2_umts_milestone2_china-use.....sbf
Direct link by chibani>>>Click<<<
------------------------------------------------------------------------------------------
Since someone extract the new kernel from OTA package, I pack them as a flashable zip. But I haven't test it yet.
Download link>>>Click<<<
Direct link by chibani>>>Click<<<
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Update.zip with root and maybe the new kernel [Based on GB release]
Original link by quens: http://bbs.gfan.com/android-2829651-1-1.html
How to Install:
1.Flash a clean CH 2.6.0 sbf
2.Download GFAN_Quens_ME722_2.3.4.rar and extract it. Copy GFAN_Quens_ME722_2.3.4_PT1.zip and GFAN_Quens_ME722_2.3.4_PT2.zip to sdcard
3.Root 2.6.0 as you always do.
4.Install D2bootstrap
5.Boot to recovery
6.Double wipe.
7.First apply GFAN_Quens_ME722_2.3.4_PT1.zip and then apply GFAN_Quens_ME722_2.3.4_PT2.zip
8.Reboot and done.
Direct link by chibani>>>Click<<<
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Rooted nandroid backup based on GB release with 4.5.3-77 kernel:
http://www.mirrorcreator.com/files/P47Y3QRR/2011_09_27_18_44_42.7z_links
after you restore this backup, you will have to flash the 4.5.3-77 kernel to make it booted.
Direct link by chibani:http://android.loicg.net/roms/2011_09_27_18_44_42.7z
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is OTA package(125mb):
http://android.loicg.net/roms/signed-delta-ota-Blur_Version.2.6.0-45.1.zip by chibani
http://mir.cr/FGIEBRFY by chijie
http://115.com/file/clt87btu
You need to upgrade from CH 2.6.0. Here is the download link:
http://android.loicg.net/roms/MLS2G...LESTONE2GCCORE_P018_A030_HWp2a_Service1FF.rar by chibani
http://115.com/file/dn6p9ej3
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Endless7 said:
This is OTA package(125mb):
http://115.com/file/clt87btu
You need to upgrade from CH 2.6.0. Here is the download link:
http://115.com/file/dn6p9ej3
How to download:
Press"**下载",then your download will start automatically.
Click to expand...
Click to collapse
Thanks for the link.. Have you tried it??
I'm unable to download.. opens a pop-up..
Is that the official release for Moto Milestone 2 in China?
Can we confirm that the bootloader it's still locked, right?
If thats true, we can forget proper customs roms.
oTToToTenTanz said:
Is that the official release for Moto Milestone 2 in China?
Click to expand...
Click to collapse
yes.
word patch.
will5 said:
Can we confirm that the bootloader it's still locked, right?
If thats true, we can forget proper customs roms.
Click to expand...
Click to collapse
still locked.
sahilarora911 said:
Thanks for the link.. Have you tried it??
I'm unable to download.. opens a pop-up..
Click to expand...
Click to collapse
yep. Updating. Try to find another way to update from GB leak. Not from froyo.
Also I guess there is no fastboot commands.
So, unlocked bootloaders coming Q4 should be only for other phones.
Let's see if at least this updates brings a newer kernel.
will5 said:
Also I guess there is no fastboot commands.
So, unlocked bootloaders coming Q4 should be only for other phones.
Let's see if at least this updates brings a newer kernel.
Click to expand...
Click to collapse
Yep. We have an update in kernel rather than the old leak kernel.
Cool. Now we need to make 2init work with this kernel. And a custom rom based on gb. Is there a defys cm7 based on gb?
will5 said:
Cool. Now we need to make 2init work with this kernel. And a custom rom based on gb. Is there a defys cm7 based on gb?
Click to expand...
Click to collapse
No, at least for now. But I think DEFY team will consider building a GB based CM8 for android 4.0. Since our GB kernel can boot defy/defy+ GB ROM
I really hate that 115.com download site. It never seems to work here. I'll just wait untill there are some usable mirrors.
I'm currently downloading on my server
The first file is here : http://android.loicg.net/roms/signed-delta-ota-Blur_Version.2.6.0-45.1.zip
and the second : http://android.loicg.net/roms/MLS2G...LESTONE2GCCORE_P018_A030_HWp2a_Service1FF.rar
Is it rootable? Has someone tried to root it?
Here are some mirrors for you:
http://mir.cr/FGIEBRFY
Has anyone tried it yet?? Any comments or reviews would be nice.
Flashing 2.6 rigth now, already downloaded the OTA, just a few more minutes I supose for the upgrade, later, a mini review, and if I can root a nandroid backup.
Until now, just flash, wipe cache/data... Boot Ok!, I have to rename the OTA file name to update.zip
I got signature fail from the update package :'(
Bad copy, just download again, and it work!
Appying update now
Update Succesfull, Kernel Version [email protected] #1
Build 4.5.3-109_MS2
I guess root only will work replacing smg files
julianlatasa said:
Flashing 2.6 rigth now, already downloaded the OTA, just a few more minutes I supose for the upgrade, later, a mini review, and if I can root a nandroid backup.
Until now, just flash, wipe cache/data... Boot Ok!, I have to rename the OTA file name to update.zip
I got signature fail from the update package :'(
Bad copy, just download again, and it work!
Appying update now
Update Succesfull, Kernel Version [email protected] #1
Build 4.5.3-109_MS2
Click to expand...
Click to collapse
U can give this a try for rooting..
http://forum.xda-developers.com/showthread.php?t=1235938
Dunno if it will work or not..
will5 said:
I guess root only will work replacing smg files
Click to expand...
Click to collapse
Droid 3 has a method of rooting that works on our GB roms.
Sent from my Milestone 2 XDA App
Step 1:
Download the .21 TW firmware from this site
http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_TF101/#download
(Eee Pad Transformer TF101 Firmware: V8.6.5.21 Only for TW SKU (Android 3.2.1))
Flash it via CWM.
Step 2:
Once installed, boot the ROM.
Use NachoRoot to gain root, once you have root, install Recovery with this apk.
http://db.tt/NBgiApdg (RecoveryInstalled, will install Rogue recovery 1.3.0, modded by baseballfanz, made
by gnufabio)
Step 3:
Download daoist’s 9.2.1.11 firmware, the latest version (1.0.1) as of this date (23 february) includes
Superuser and busybox.
1.0.1 link: http://bellybuttonporn.com/android/transformer/kwt-cwm-9.2.1.11-TWv1.0.1.zip
His thread: http://forum.xda-developers.com/showthread.php?t=1334673
Step 4:
Flash daoist’s 9.2.11 firmware, boot up and enjoy ICS!
whitekidney said:
Step 1:
Download the .21 TW firmware from this site
http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_TF101/#download
(Eee Pad Transformer TF101 Firmware: V8.6.5.21 Only for TW SKU (Android 3.2.1))
Flash it via CWM.
Step 2:
Once installed, boot the ROM.
Use NachoRoot to gain root, once you have root, install Recovery with this apk.
http://db.tt/NBgiApdg (RecoveryInstalled, will install Rogue recovery 1.3.0, modded by baseballfanz, made
by gnufabio)
Step 3:
Download daoist’s 9.2.1.11 firmware, the latest version (1.0.1) as of this date (23 february) includes
Superuser and busybox.
1.0.1 link: http://bellybuttonporn.com/android/transformer/kwt-cwm-9.2.1.11-TWv1.0.1.zip
His thread: http://forum.xda-developers.com/showthread.php?t=1334673
Step 4:
Flash daoist’s 9.2.11 firmware, boot up and enjoy ICS!
Click to expand...
Click to collapse
So just to be clear, I can have an US version Transformer and I will be able to install the TW firmware without any problems? Right now I'm rooted with Revolver rom and I don't want to go through all of these steps and get to the end and realize the TW firmware won't take. Thanks.
Will this work coming from a WW based firmware though ?
kxs783kms said:
So just to be clear, I can have an US version Transformer and I will be able to install the TW firmware without any problems? Right now I'm rooted with Revolver rom and I don't want to go through all of these steps and get to the end and realize the TW firmware won't take. Thanks.
Click to expand...
Click to collapse
Yes.
Happydondavid said:
Will this work coming from a WW based firmware though ?
Click to expand...
Click to collapse
Yes, if flashed via CWM.
If I'm already rooted, can I just flash the ICS TW version?
LZLandingZone said:
If I'm already rooted, can I just flash the ICS TW version?
Click to expand...
Click to collapse
No, you need the TW firmware for the ICS TW to work.
Only Nachoroot works? Razorclaw isn't?
Forget it. That exploit was patched.
Does this keep root for ICS
Sent from my Transformer TF101 using xda premium
Hi..... Sorry... I just want to make sure... even if I am using Spark ICS at this moment, I need to do the steps in the first post?
plantroller said:
Does this keep root for ICS
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Yes. Superuser is included in the ICS update by daoist.
Tails said:
Hi..... Sorry... I just want to make sure... even if I am using Spark ICS at this moment, I need to do the steps in the first post?
Click to expand...
Click to collapse
Yes.
Installing TW firmware now. So far so good. Will post feedback throughout the process.
I use Revolver 3.11 and when i try to install TW_epad-user-8.6.5.21.zip from Recovery v3.1.0.1 i get asser failde:write_raw_image("/tmp/blob",staging")
any ideas?
Thks
Yup that plan should work. A ww tf101 will not catch the OTA update but will do a sdupdate
Sent from my Infected Galaxy Y using Tapatalk
You guys running the TW version of ICS ROM, does everything work for you? Wifi, GPS, etc etc.
Sent from my Transformer TF101 using xda premium
Update: Nachoroot is a no go for me. Luckily, I have a B50 model. Wonder if I can root this puppy via APX mode. Are there any root methods available for .21?
kxs783kms said:
Update: Nachoroot is a no go for me. Luckily, I have a B50 model. Wonder if I can root this puppy via APX mode. Are there any root methods available for .21?
Click to expand...
Click to collapse
Nachoroot works for all HC versions afaik.
Is a factory reset required? And I'm assuming flashing back to US firmware works fine
whitekidney said:
Nachoroot works for all HC versions afaik.
Click to expand...
Click to collapse
Someone posted earlier in this thread that that method was patched. Of course, I found this out after I installed the TW firmware.
dvinnen said:
Is a factory reset required? And I'm assuming flashing back to US firmware works fine
Click to expand...
Click to collapse
Nope, I didnt have to wipe data. Flashing back to US should be no problem.
eminembdg said:
You guys running the TW version of ICS ROM, does everything work for you? Wifi, GPS, etc etc.
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Everything works just fine.
kxs783kms said:
Someone posted earlier in this thread that that method was patched. Of course, I found this out after I installed the TW firmware.
Click to expand...
Click to collapse
Razorclaw was fixed, but Nachoroot works.
giannis kitromilides said:
I use Revolver 3.11 and when i try to install TW_epad-user-8.6.5.21.zip from Recovery v3.1.0.1 i get asser failde:write_raw_image("/tmp/blob",staging")
any ideas?
Thks
Click to expand...
Click to collapse
i have the same issue.
Hi I have a query I can install a modified rom gt my N7000 note before installing a stock (so gingerbreak pass a cooked rom ICS? I would like a stock but all are in hot file server and that gives mme many problems. If could do run some risk with kermels? thanks
There are 2 safe "stock" ICS kernel, franco's r3 and SpeedMod's K3-1, or any GB kernel.
So I recommend using a safe kernel to install any ICS rom you want then use franco or speedmod's ics kernel.
CronosCR said:
Hi I have a query I can install a modified rom gt my N7000 note before installing a stock
Click to expand...
Click to collapse
What...?
CronosCR said:
(so gingerbreak pass a cooked rom ICS?
Click to expand...
Click to collapse
What...?
CronosCR said:
I would like a stock but all are in hot file server and that gives mme many problems. If could do run some risk with kermels? thanks
Click to expand...
Click to collapse
What...?
Thank you very much and sorry for the google translator is not perfect and my English is not very good
http://forum.xda-developers.com/showthread.php?t=1424997
There are mirrors posted by user in this thread or others, download from there and proceed on with pc odin. Or flash stock gb throught odin and use kies to update. You will loose root and data
IN PC ODIN DO NOT SELECT repartition or clear efs.
Sent from my GT-N7000 using Tapatalk 2
I have Clockworkmod installed and now that ice cream sandwich is finally out I want to upgrade my a500. Can someone point me to right firmware and directions.
I guess I need new boot loader installed also.
tritron777 said:
I have Clockworkmod installed and now that ice cream sandwich is finally out I want to upgrade my a500. Can someone point me to right firmware and directions.
I guess I need new boot loader installed also.
Click to expand...
Click to collapse
You will want to upgrade your bootloader first for sure. Most roms are going to not work with the Honeycomb bootloader in the near future. Go ahead and put version 7 of the bootloader on, so future bootloader enhancements can be flashed via CWM. Once you install the bootloader, install CWM again, pick a rom & enjoy! Test drive them all.
read the afterota thread in dev section download the software, as easy as 1-2-3 and your pretty much done , I dont know if he has V7 listed now , if not Civato has it!
Attantion
To upgrade to tegraowners ICS ROM or FLEXREAPER (not extrem vetsion) is no new bootloader needed!
I'm using both ROM with my stock HC bootloadet!
You can upgrade the bootloader later if you like.
m.
meduza2 said:
To upgrade to tegraowners ICS ROM or FLEXREAPER (not extrem vetsion) is no new bootloader needed!
I'm using both ROM with my stock HC bootloadet!
You can upgrade the bootloader later if you like.
m.
Click to expand...
Click to collapse
Really?
I have 4.0.3 and have just rooted.
I have downloaded tegraowners ICS to my sd and the latest galls.
Are you saying i can just boot and do the power + vol deal to install this rom and keep my bootloader stock?
Yes! But if it is the newst tegraowners ICS recovery 1.7.3 is required.
m.
meduza2 said:
Yes! But if it is the newst tegraowners ICS recovery 1.7.3 is required.
m.
Click to expand...
Click to collapse
Can I install 1.7.3 with Acer recovery installer?
No! Only a basic version but with that you can flash then 1.7.3.
m.
meduza2 said:
No! Only a basic version but with that you can flash then 1.7.3.
m.
Click to expand...
Click to collapse
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
OldGaf said:
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
Click to expand...
Click to collapse
Exactly..
Yes!
m.
OldGaf said:
So.... you mean i can use ari to install an older ver of clockwork and then with that i can install 1.7.3?
Click to expand...
Click to collapse
Sigh..... OK..... I tried 1.3.4 but now when I try to enter recovery I get "recovery verified failed" in red and I am unable to get the old one back.
I am running the ota ics 4.0.3 with 0.03.12-ics bootloader.
This was rooted with thund3r's method.
1. Which ver of cwm should i install with ari so I can then install touch 1.7.3
2. Is there anything I am not doing that i need to?
3. Is there a stock one I can download and install with Ari if I need it back?
Try the afterota tool http://forum.xda-developers.com/showthread.php?t=1675939, you can manually select the recovery you want and upgrade the bootloader if you need to. It's very easy to use.
lowsum said:
Try the afterota tool http://forum.xda-developers.com/showthread.php?t=1675939, you can manually select the recovery you want and upgrade the bootloader if you need to. It's very easy to use.
Click to expand...
Click to collapse
Sigh... there is only the light ver available for that now which is for info only.... and that crashed while gathering info.
Disable antivirus and user control on PC!
m.
meduza2 said:
Disable antivirus and user control on PC!
m.
Click to expand...
Click to collapse
Ya was thinking that... but no point with light ver as it does not actually do anything.... info only.
Hope the full version is back soon..... don't like loosing....
meduza2 said:
Disable antivirus and user control on PC!
m.
Click to expand...
Click to collapse
OK... All is good now and am running FLEXREAPER-RF1-EXTREME-EDITION_rv3 !!!
Thanks a so much for your help!
I picked this ROM as my first as it is same kernel and there are not many issues. May go to Tegraowners once issues are not as many.
Thanks again!
-OG-
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
I got the tab 2 p5113 stock ICS 4.0.4 OTA zip, also have the Kies file both ready to use
Update from kies
Update from OTA on device
Both are the Android ICS 4.0.4 Update Stock ROM
??
I would say your teasing me, stuck in boot already. CWM ready for flash.
Wildcat2083 said:
I got the tab 2 p5113 stock ICS 4.0.4 OTA zip, also have the Kies file will upload that later
Dropbox link comming soon
Click to expand...
Click to collapse
Gorbesh said:
I would say your teasing me, stuck in boot already. CWM ready for flash.
Click to expand...
Click to collapse
Your update is now posted, the kies update is being uploaded next
Hi,
Sorry about the silly Q. but, how can we use this 'kies' files to get tab updated?!
michael_zz said:
Hi,
Sorry about the silly Q. but, how can we use this 'kies' files to get tab updated?!
Click to expand...
Click to collapse
Im pretty sure you have to use ODIN to flash the update labeled kies, there used to be a way to force kies to use the downloaded firmware however kies has been updated so it may not work, id suggest google or looking around on XDA for a bit more help
Has anyone done this successfully with odin? Thanks
Kevhed said:
Has anyone done this successfully with odin? Thanks
Click to expand...
Click to collapse
If they have no one has reported it, however their is another thread with a p5113 rom multi language in the same tar.md5 format and its flashed with ODIN so its safe to the best of my knowledge, i can test it later and let u guys know
Wildcat2083 said:
I got the tab 2 p5113 stock ICS 4.0.4 OTA zip, also have the Kies file both ready to use
Update from kies
Update from OTA on device
Both are the Android ICS 4.0.4 Update Stock ROM
Click to expand...
Click to collapse
Thanks for the files, the Kies one is 1 GB and the OTA is 200 MB, dumb question as I just woke up but what's the difference between both? I have a stock P5113 I'm thinking of simply rooting and I would like a stock rom to flash back to the state it was in out of the box, which of the 2 files do I want and what are the differences, thanks and sorry if it's a silly question.
PS: is this the P5113UEBLG5 version from july? I'd assume so according to the date of the post I'm actually in need of P5113UEBLH3
Philminator said:
Thanks for the files, the Kies one is 1 GB and the OTA is 200 MB, dumb question as I just woke up but what's the difference between both? I have a stock P5113 I'm thinking of simply rooting and I would like a stock rom to flash back to the state it was in out of the box, which of the 2 files do I want and what are the differences, thanks and sorry if it's a silly question.
PS: is this the P5113UEBLG5 version from july? I'd assume so according to the date of the post I'm actually in need of P5113UEBLH3
Click to expand...
Click to collapse
One is compressed into a ZIP file and the other is the full MD5 file.
help
Hi there,
The download links don't work anymore. Any chance OP has the file?
I realize this is quite an old thread, but I'm trying to give life to an old tablet, and this seems to be my last hope. I've tried almost every kernel and rom I can find. I got one ICS to work, but then WiFi wasn't working... And no one had a solution. Then I found an JB combo that I got to work, but it was just too slow. So that's why I wanted to stick with ICS.
If anyone has the files, it would be greatly appreciated if you can post a download link.
Thanks!