Hi,
I have a rooted Defy+ BL7 DFP-231.
Now I want to overclock this to 1100 Mhz.
I tried using SetVsl apk (which I used to overclock the same defy+ earlier on CM10 quarz build) but after installation, the moment I try to open the app, the phone restarts and stays in the Moto logo.
Happened number of times - found this issue in some other post but no solution I know of.
Can anyone please help?
royzlife said:
Hi,
I have a rooted Defy+ BL7 DFP-231.
Now I want to overclock this to 1100 Mhz.
I tried using SetVsl apk (which I used to overclock the same defy+ earlier on CM10 quarz build) but after installation, the moment I try to open the app, the phone restarts and stays in the Moto logo.
Happened number of times - found this issue in some other post but no solution I know of.
Can anyone please help?
Click to expand...
Click to collapse
I have`d the same problem.
You cannot overclock the stock bl7 Rom.
http://forum.xda-developers.com/showthread.php?p=25887427
Try the above link for me has worked. But not as i wanted.
I recommend you to try a different Rom.
Sent from my MB526 using xda app-developers app
Related
HI all,
Am using Defy MB525
Yesterday I tried to install ICS 4.0.3 Mar 17 build for defy+,I did factory reset and installed from SD card (ICS build,Gapps,Batteryfix),I didn’t flash any kernals like one of our forum member told, But my defy is stucked on boot logo.I tried many times but doesn’t work So again am back to 2.3.7 Version. My kernel version 2.6.32.9-gb08c3c8
Why this happened to me?
What is the procedure?
If you dont know what you are doing dont install.ics is still beta its a nightly ..and is improving day by day moreover hwa 2D is still missing without it..cm9 is just a theme like Gb..i would say better stick to stock..or flash quarx defy+ cm7 nnightly..
Sent from my MB525 using Tapatalk
madhavandeffy said:
HI all,
Am using Defy MB525
Yesterday I tried to install ICS 4.0.3 Mar 17 build for defy+,I did factory reset and installed from SD card (ICS build,Gapps,Batteryfix),I didn’t flash any kernals like one of our forum member told, But my defy is stucked on boot logo.I tried many times but doesn’t work So again am back to 2.3.7 Version. My kernel version 2.6.32.9-gb08c3c8
Why this happened to me?
What is the procedure?
Click to expand...
Click to collapse
Sorry, I've only flashed CM9 on my defy+ and I have kernel 2.6.32.9-gbdd614e etc. I't's not exactly the same, so maybe I'm wrong about not flashing the CM9 kernel! I actualy think you have froyo kernel!
EDIT: Yes, you have FROYO kernel! Go ahead and flash the CM9 kernel! Sorry
you must flash the SBF of 2.3
Pason said:
you must flash the SBF of 2.3
Click to expand...
Click to collapse
If you don't know what you are talking about, then just DON'T! If he flashes stock sbf 2.3, he will never be able to go back to Froyo. All he needs to do is flash the CM9 GB kernel.
As Auris told never flash 2.3 SBF until you DONT want to downgrade! What you said you did is absolutely fine. Just flash CM9GB kernel and it will work. But anyways I don't understand why would you want to flash the CM9 Defy+ ROm because Defy ROM is likely to be updated sooner and CM officialy support Defy!
My fault! In an other thread he didn't specify all those numbers after 2.6.32.9-gbdd so I thought he had gingerbread kernel and told him to flash the plus builds!
Sent from my Defy+ using xda premium (app needs update!)
i was wondering if i could try the latest CM9-NIGHTLY-120411-Defy+.zip(DEFY+ zip) on Defy running 4.04 (1204006)??
is it safe... what files will i need to use??? do i hv to try to the different kernel.. till now i had been using CM7 kernel...for my defy.
coolatin said:
i was wondering if i could try the latest CM9-NIGHTLY-120411-Defy+.zip(DEFY+ zip) on Defy running 4.04 (1204006)??
is it safe... what files will i need to use??? do i hv to try to the different kernel.. till now i had been using CM7 kernel...for my defy.
Click to expand...
Click to collapse
I am not sure, but previous versions by eppy, talking bout dec 2011 builds, were defy+ builds too and they worked on the normal defy. But I have forgotten, how or what was to do oO
I wouldn't try it, cause I am too afraid to do something wrong and brick. have you fully read through the CM9 thread? maybe there is kinda an answer.
Other possible problems, i thinnk can appeare are:
-Battery not loading, due to different battery properties
-Camera Problems
I would recommend, to wait these 2-3 days until a new defy build appears. This will be optimised for the "normal" defy.
I also heard people are experiencing problems with 1104 build...
You will have to flash the gingerbread kernel first (defy+ kernel) and afterwards you may have battery problems.
And if you have defy green lense your camera wont work.
labsin said:
You will have to flash the gingerbread kernel first (defy+ kernel) and afterwards you may have battery problems.
Click to expand...
Click to collapse
Yup, as mentioned in this thread you can install in red lens defy after flashing the defy+/gb kernel but you also need a battery patch as the charge ratings are different for defy and defy+.
coolzarjun said:
Will it work for a red lens normal defy ??
Click to expand...
Click to collapse
prasannavl said:
You may have to find the patch for battery first which works with DFP-231. Other than that, I don't think there should be any problem.
I only have a Defy Plus. So, can't test it.
Click to expand...
Click to collapse
:Hey guys,
I'm in trouble with multiboot and tried some ways but failed. So I need your help!
My main system is MS2 2.3.4, BL6, GB kernel. And I want CM9 defyplus to be the 2nd system.
First I tried m11kkaa's multiboot v0.7 but couldn't launch CM9, it stunned with black screen. Then I found multiboot can't work on GB kernel after that. So I searched solution and found this View attachment multiboot_v0.5.5_fix.zip，it came from http://bbs.mfunz.com/forum.php?mod=viewthread&tid=408756, and could work on GB kernel. With this i could launch CM9 finally, but it came out another question, the encryption unsuccessful and couldn't go on.
After reading the changelog of m11kkaa's multiboot I thought maybe the v0.6.1 can work properly. So I tried to contact with the guy who did modification on it for help but failed.
I think the attachment maybe useful to m11kkaa for developing multiboot on gb kernel, but i cant reply his thread for i'm new.
Can someone help for letting m11kkaa know here maybe have the solution of multiboot with gb? I'm very thankful!
My defy plus is bl7.. So stock gb kernel.. And multiboot worked fine.. Just don't flash any kernel.. I didn't have any problem..
Sent from my MB526 using xda premium
dk0108 said:
My defy plus is bl7.. So stock gb kernel.. And multiboot worked fine.. Just don't flash any kernel.. I didn't have any problem..
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
Actually i got touch with the guy from mfunz.com finally, and with his help i got a fixed v0.6.1, then i made it.
The only thing which different from my 1st try is when stunned as black screen i kept waiting, for about 3 or 5 Minutes the screen turned on at last. Then i got into desktop without encryption unsuccessful.
So maybe i should wait longer at the first try? maybe the fixed version is unnecessary?
Anyway, thanks for your reply. let me know the multiboot can work with gb kernel at least.
But i swear i saw m11kkaa'reply in his thread saying that it's not support for gb kernel.
And, what's mean of 'Greenbreadmod' in the changelog?
I used v0.6.1.. Not the fixed one.. I didn't have any problems.. Tried cm7 ms2ginger and cm9 on multiboot and all worked fine.. what image files are you using?? did you flash a kernel while installing ms2ginger??
Sent from my MB526 using xda premium
Hi,
I have a defy and recently i have flashed an Asian Defy+ sbf on my defy.
I have rooted it and installed the Defy 2ndInit...and then afterwards i tried to install the MIUI 2.4.13 GB stable version on it.
But the installation was not successful. I got an error at the boot loader screen....something like (Err: A5,70,00,00).
Can anyone guide me how can i install MIUI on my defy again. I have attached the screenshot of the kernel details here.
I know there could be some problem with the BL it dont exactly understand it....
Thanks....
You have a GB kernel and the ROM you are flashing is based on froyo kernel.
Shrewdy said:
Hi,
I have a defy and recently i have flashed an Asian Defy+ sbf on my defy.
I have rooted it and installed the Defy 2ndInit...and then afterwards i tried to install the MIUI 2.4.13 GB stable version on it.
But the installation was not successful. I got an error at the boot loader screen....something like (Err: A5,70,00,00).
Can anyone guide me how can i install MIUI on my defy again. I have attached the screenshot of the kernel details here.
I know there could be some problem with the BL it dont exactly understand it....
Thanks....
Click to expand...
Click to collapse
miui is based on the CM7 kernel for defy. The froyo kernel. There is no chance to get miui work on the defy+ GB kernel.
so if you weren't able to flash a froyo sbf (downgrade), you might use cm10.
Sent from my GT-P7500 using XDA Premium HD app
Everything for testing!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I wrote this for maybe less confusion
Works with my Defy - red lense Bayer cam - on Defy+(gingerbread Kernel) Jelly Bean Quarx 24.8 Rom
I´ve
1. Flash test_2ndboot_6.10.zip from http://quarx2k.ru/ or my 2ndboot_06.10.zp from attached dropbox (search for 2ndInit recovery if you dont have and root your defy)
2. Boot into Recovery
3. Set 2ndboot as default
4. Go to tools/adb daemon and klick it and then reboot
If you want to go back to stock gb kernel flash stock kernel -like gb-234-451-134-signed.zip from dopbox i´ve attached
Remember everything is for Test the custom kernel
OT - Multiboot is ok with CM7 but akku is always 100%
https://www.dropbox.com/sh/4fg71wuehyibzzx/oanepGgaRR
BIGNOTE: Green lens users who flashed redlens builds please dont try using flash, you will end up burning it like me and many others
Big thanks to our great DEV´s Quarx as porter :good: , Walter for fixing :good: and MS2 Dev czechop who made this possibile :good:
Great works men !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11
Hi, i tried all the methods without sucess... Alldays the same: blue led then red and stuck at moto logo. Any ideas?
Sorry for my english and thanks in advance
Redhotero said:
Hi, i tried all the methods without sucess... Alldays the same: blue led then red and stuck at moto logo. Any ideas?
Sorry for my english and thanks in advance
Click to expand...
Click to collapse
Defy or Defy+ ?
bone101 said:
Defy or Defy+ ?
Click to expand...
Click to collapse
Defy red lens with defy + build gb kernel
Sent from my MB526 using xda premium
I have done it in such manner
1. Prepared on SD card:
- CM10 ROM 24/09 for MB526,
- gapps for JB
- Qkernel 2ndboot_06.10.zip (with improved 2ndboot.ko)
2. Done factory reset and viped caches
3. Installed CM10 and gapps in normal manner
4. Flashed Qkernel
5. Went to bootmenu and choosed 2nd-boot (there was no chance to set it as default... i think, because phone immediately reboots)
And achieved "half success". All is working but with extremely lags... Was said so after first bootup system suppose to be laggy and needs to wait some time on sleep state with WiFi switched off. I was waiting whole night.
So now I want to know, if my procedure is right.
Nobody mentions gapps during instali of ROM - i suppose it's so trivial so nobody count it on...
Another problem - is there need of factory reset or cache wipe?
After installing Qkernel i went to boot menu to set 2nd-boot as default, but when i choose 2nd-boot phone reboots and I don't know what now with this setting up deafult 2nd-boot...
I am trying to fond any reason of system lagginess. Maybe something was done wrong. What's your opinion? To change ROM build? Or something else...
Redhotero said:
Defy red lens with defy + build gb kernel
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
You can try it with the kernel from my drop box
I nerver wiped anything
For me it works as I've done
http://forum.xda-developers.com/showthread.php?t=1542956
bone101 said:
You can try it with the kernel from my drop box
Click to expand...
Click to collapse
Of course I can try, but does it make any difference? Well, will see...
So I'm supposed to flash your kernel "as is" without much deliberation over existing installation?
If you are on boot loader ver 7 i cant say that it would work
Some peoples in this
http://forum.xda-developers.com/showthread.php?p=32535395
Wrote about problems with custom kernel . Look around page 67 if your defy+ was stock bl7
I am using regular Defy with Bayer module and as first owner I am sure so there was not flashed any full sbf except once when I was forced to flash stock Froyo, so there is no case of BL7 I think...
So if I try can I flash this kernel over existing system or should I reflash ROM too?
bone101 said:
You can try it with the kernel from my drop box
Click to expand...
Click to collapse
Tried without success. Ill have to flash sbf rigth? Which do you recommend?
what are the advantages of using this kernel?
I don't know the advantage, for me it works as i do.
I started with stock cee European gingerbread which I've flashed after offical update comes out
New nightley from quarx cm10-2ndboot-nightly-defy(+)
Is out & works a bit faster
bone101 said:
I don't know the advantage, for me it works as i do.
I started with stock cee European gingerbread which I've flashed after offical update comes out
New nightley from quarx cm10-2ndboot-nightly-defy(+)
Is out & works a bit faster
Click to expand...
Click to collapse
Flashed new nightly and problems are gone
Redhotero said:
Flashed new nightly and problems are gone
Click to expand...
Click to collapse
thank to quarx
trurl3 said:
I am using regular Defy with Bayer module and as first owner I am sure so there was not flashed any full sbf except once when I was forced to flash stock Froyo, so there is no case of BL7 I think...
So if I try can I flash this kernel over existing system or should I reflash ROM too?
Click to expand...
Click to collapse
In General section http://forum.xda-developers.com/showthread.php?t=1909242&page=84
they talk about BL5 and BL6 is supportet by quarx not BL4 and BL 7
Some say it works on BL7
But better read there for your self.......beforr you flash anything and think about warrity/garantie
For every booting i had to umount and mount again the battery.
And no Deep-Sleep in about 12 hours
Anyone else with this problems?
---------- Post added at 09:37 AM ---------- Previous post was at 08:49 AM ----------
Now Deep-Sleep is ok. Dont know why .... But ... Quarx said in the xda-developer thread,
that with no usb-cable and with wifi disabled the defy should go 10-15 sec. in deep-sleep.
Before i have had usb-cable on or wifi enabled. Maybe that has been the reason.
After 3 hours 14 % battery drain ... not good ...
Quarx edited a new Rom today.
But after getting more and more slow reactions from the defy+ i flashed the 24.09 version.
All tips didn't really work in a good way.
And I need my defy+ functionabel this days.
But next time again ...
And today again a new kernel for update as *.zip ...
quarx2k.ru/cm10-2ndboot-nightly-defy(+)/update_for_11.10_v2.zip
13.10 Kernel update:fix wifi tether(reboot), reduce battery drain, compiled with linaro 4.5, fix charge only mode, cleanup unused drivers.