Database Users

[Q] Defy Plus MIUI

I am currently trying to get full battery of my defy+ to work under MIUI. Being CM based i assumed it would work with the CM battery patch. It doesn't however. I know which files need to be replaced, would it be a good idea to just grab the files from the CM9 defy+ build and replace them?
For those that are interested doesn't work = battery only showing full with question mark icon.

Having same problem and seems there is total silence in all forums concerning this issue. If you manage to solve it please let me know !

Hey, guys I'm using MIUI Pikachu Edition by einsteinno1 and it has full DEFY+ support (battery charges up to 100%)
It's overall an awesome ROM, after trying CM7.2, latest WIUI and MS2G v3, Pikachu is the best one for me.
My DEFY+ was on 2.3.5, so I flashed it down to Froyo before flashing Pikachu
Cheers!

I have the same Defy 2.3.5 but I don't know how to install a diffrent ROM/interface ...

iceguy0585 said:
I have the same Defy 2.3.5 but I don't know how to install a diffrent ROM/interface ...
Click to expand...
Click to collapse
Search this wonderful Forum - There are many threads telling you how to install a new ROM / interface

Well then I will definitely give Miui Pikachu edition a try As far as I understand Froyo version is the best to use to flash Miui right ?

Hi all,
About the Defy+ battery. This battery is only support by GB kernel. So nevermind the patch you applied, you'll always have a bad result. This patch works on CM 7.2 Defy + because this rom doesn't incluse the kernel and use the GB one of your phone.
So the only solution is what nisky+ said... Flash before the 2.3.6 SBF on the dev forum who allow you to flash a Froyo kernel first...
http://forum.xda-developers.com/forumdisplay.php?f=855

DeanSebastian said:
Well then I will definitely give Miui Pikachu edition a try As far as I understand Froyo version is the best to use to flash Miui right ?
Click to expand...
Click to collapse
Froyo is the safest way, yes, and it will work without problems. It should work when flashed over 2.3.4, too, but I haven't tried that, myself.
@mdt24 Then how come I don't have battery problems now when Froyo's kernel is used
P.S. It's niksy, not nisky

Hi niksy ;-)
It's because I think this rom doesn't incluse kernel, so you always run a 2.3.4 GB Kernel...
quote from Miui Pikachu edition : IMPORANT!!! this Rom works only on Defy or Defy+ with Froyo Kernel or Gingerbread 2.3.4/5 Kernel. All with 2.3.6 Kernel have to downgrade to Froyo Kernel, because the new Motorola Kernel won't work with MIUI. Just use this Tutorial on XDA Developers
But I could be wrong in my deduction, so Please, can you give us the number of the kernel you have with this pikachu rom ?...

What I did before was downgrade from 2.3.6 using the sbf the dev provided that allows you to downgrade to froyo then I flashed Miui official rom and still had problems with battery. Kernel version currently is : 2.6.32.9gb08c3c8 if that makes any sense to you cause I personally just don't know anything bout kernels... I just downloaded pikachu Miui and will give a try soon and share the results with you

Hey all, thanks for the replies. I already know about the limitations of the patch and which versions the driver works with. That is why i flashed the 2.3.4 kernel before using MIUI and therefore the defy + patch. I just don't get why it doesn't work, do i need to use a defy+ kernel?
I will grab the files used in the working MIUI Defy+ rom and package them as a flashable .zip for other users.

mdt24 said:
Hi niksy ;-)
It's because I think this rom doesn't incluse kernel, so you always run a 2.3.4 GB Kernel...
quote from Miui Pikachu edition : IMPORANT!!! this Rom works only on Defy or Defy+ with Froyo Kernel or Gingerbread 2.3.4/5 Kernel. All with 2.3.6 Kernel have to downgrade to Froyo Kernel, because the new Motorola Kernel won't work with MIUI. Just use this Tutorial on XDA Developers
But I could be wrong in my deduction, so Please, can you give us the number of the kernel you have with this pikachu rom ?...
Click to expand...
Click to collapse
Mate, you are right about the ROM, it doesn't include any kernel, but I said that I flashed that special version 6 Froyo (that's a full sbf) before flashing Pikachu!

DeanSebastian said:
What I did before was downgrade from 2.3.6 using the sbf the dev provided that allows you to downgrade to froyo then I flashed Miui official rom and still had problems with battery. Kernel version currently is : 2.6.32.9gb08c3c8 if that makes any sense to you cause I personally just don't know anything bout kernels... I just downloaded pikachu Miui and will give a try soon and share the results with you
Click to expand...
Click to collapse
The kernel you mentionned is a froyo kernel...
As you all I try to understand why it's possible that the defy+'s battery works or not with the patch. It's sure it works with a 2.3.6 GB kernel and a patch for the system (battd, lib) used by the rom if the new rom doesn't include a kernel.
It seems that if the rom include a froyo kernel the patch doesn't work...
So... may be a way to understand
---------- Post added at 03:56 PM ---------- Previous post was at 03:43 PM ----------
niksy+ said:
Mate, you are right about the ROM, it doesn't include any kernel, but I said that I flashed that special version 6 Froyo (that's a full sbf) before flashing Pikachu!
Click to expand...
Click to collapse
Yes but I'm pretty sure than this special version has a GB kernel. It's just the bootloader who accept all kind of kernel...
Check your Kernel number, I think you must have something like this 2.6.32.9-gbdd614e...

Ok after some testing I can tell you that the battery charged to 100% only the first time I booted.Since then it has only charged till 90%. I also did calibrate the battery the first time I flashed the Rom but no results

mdt24 said:
Yes but I'm pretty sure than this special version has a GB kernel. It's just the bootloader who accept all kind of kernel...
Check your Kernel number, I think you must have something like this 2.6.32.9-gbdd614e...
Click to expand...
Click to collapse
It's 2.6.32.9-gb08c3c8 - the one you said it's Froyo Just checked!
And for the battery... First time it charged to 100%, this time it stuck at 90%. Quite weird... But, that is with Froyo kernel, as we've come to conclude.
But, on the other hand, my bro's got a DEFY+, too, with CM7.2 on it and with Gingerbread kernel (27th January DEFY+ nightly) and the battery goes to 100% every time. I will test Pikachu on a Gingerbread kernel, cause I can't really live with this bug :-/ Will let you know how it went, now I'm off to find a 2.3.4 sbf!

I had the same idea and have already downloaded a full 2.3.4 GB sbf to check just that !
i wish a 2.3.4 GB kernel can fix that, although I think the only kernel able to fix this is 2.3.5 and above

Hi.. I m new to android... I just want to ask how can I add music contol to notification toogle bar like that in cm mod..... I m using pikachu edition on my defy plus and its really great ... I haven't faced any problem till now.. thank u dev for such a beautiful rom...

hey buddy....i was runing on 2.3.5 than i tried a rom called [Retail British] here ; http://sbf.droid-developers.org/umts_jordanplus/list.php
then
i upgreade it by automatic update so it became 2.3.6
then i again flash it through [Retail British] after that my device not able to power on just with white led light but i'm able to flash the device ..so can u suggest me a suitable rom for my device [Motorola defy+] ??
HELP pls

Thanks !!
mdt24 said:
Hi niksy
It's because I think this rom doesn't incluse kernel, so you always run a 2.3.4 GB Kernel...
quote from Miui Pikachu edition : IMPORANT!!! this Rom works only on Defy or Defy+ with Froyo Kernel or Gingerbread 2.3.4/5 Kernel. All with 2.3.6 Kernel have to downgrade to Froyo Kernel, because the new Motorola Kernel won't work with MIUI. Just use this Tutorial on XDA Developers
But I could be wrong in my deduction, so Please, can you give us the number of the kernel you have with this pikachu rom ?...
Click to expand...
Click to collapse
Thanks for ur Info.. tried to install Pikachu edition on my Defy+ 2.3.6 nd failed. But now using CM10..

[Q] [q] cm9/ics/gapps - defy+ 2.3.6 kernal

[Q] hello sir,
Do own Defy+2.3.6 (ryt now using MS2Ginger 3 by walter79 ), want to use CM9/ICS, downloaded zip CM9-NIGHTLY-120112-Defy+.zip & CM9 kernel. kindly suggest proper installation procedure and info abt the ics gapps versions which one to use. i dont want to use other kernal rather than 2.3.6 can i flash CM9 on stock rom
waiting for ur humble replies ☻thanks in advance☻
God bless you All.

Why don't you want to use the Froyo kernel? I wouldn't use this nightly. You can't even phone with it! If you have BL6, flash the BL6-SBF with Froyo-kernel.
Don't use the flashlight until you flashed the CM7-kernel, you could burn it with the Chinese kernel of this SBF.
Then root the phone with the latest SuperOneClick and (after backup) follow my instructions here. Use the latest CM9-zip, ICS-Google-apps and the CM7-kernel(NOT the CM9-kernel) instead of the zips in that post. If you want to have the Motorola-Bootlogo back, also flash the attached Red_M_Logo.zip, or use my CM9-Bootlogo.zip. Flash the CM9-Music.zip if you want to use the new CM9 music app (it's very good, i can recommend it).
If you have BL7, i would wait until eppy makes a build for the Defy+ kernel.

thanks for your replies,
please let me know checking battery version ( bl5,bl6,bl7 ),my defy mfg. date is dec 2011 , details on battery HF5X, b052r984-1001, model L-L-L- DC111109.
and CM9 GB kernel is available so why not to use it, hope u clear my mind.

veeranna said:
[Q] hello sir,
Do own Defy+2.3.6 (ryt now using MS2Ginger 3 by walter79 ), want to use CM9/ICS, downloaded zip CM9-NIGHTLY-120112-Defy+.zip & CM9 kernel. kindly suggest proper installation procedure and info abt the ics gapps versions which one to use. i dont want to use other kernal rather than 2.3.6 can i flash CM9 on stock rom
waiting for ur humble replies ☻thanks in advance☻
God bless you All.
Click to expand...
Click to collapse
defy + wont be able to get update of 4.0 do not even try for this

I have a Defy+ with CM9/ICS, it works!

i think i try flashing it on my stock rom... i think eppsy build for gb builds hope no downgrading is required i guess any suggestions and recommendations are welcome.

WHAT VERSION HAVE YOU FLASHED ?
I mean which build are you using with Defy+ ?

i am using stock 2.3.6 and i tried
stock/cm 7.2 nightly.
stock/ics latest builds
works well but no network on second booted rom doesnt get any network ( no EMIE )
hope some one fix this soon or some one did let me know

veeranna said:
i am using stock 2.3.6 and i tried
stock/cm 7.2 nightly.
stock/ics latest builds
works well but no network on second booted rom doesnt get any network ( no EMIE )
hope some one fix this soon or some one did let me know
Click to expand...
Click to collapse
Did you try using basebandswitcher? Just to search for a frequency similar to your stock baseband? I think you did because default ms2ginger baseband definitely isn't what you seem to be running on stock 2.3.6...
Oh, and btdubs I think Mister Ypsilon is right about using froyo kernel builds for CM9. Your nightly doesn't seem to be too stable.
*EDIT
Oh and veeranna don't forget, BL version (BL5/6/7) is not your battery version. It's the version of the bootloader, and it is very important when it comes to downgradeability.
search it up, I don't do a very good job of explaining bootloader stuff.

Its awesome but lil buggy
I did it! Installed Froyo SBF, rooted, 2nd init, then CM9 for Defy, CM7 kernel, slept at 5A.M :O and bingo there was a pretty stable ICS but without camera! After playing around with it for few hours.. Tested NFS Shift, Angry Birds and everything was smooth as butter except that there was no Camera due to which I restored it back using a full SBF flash and my Nandroid backup
Can be used if you don't need a camera..!
I have a Defy+ flashed with stock 2.3.6 SBF en.asia
http://forum.xda-developers.com/showpost.php?p=20097916&postcount=3
Check this it is working fine. Tested on my moto after a full fresh Defy+ 2.3.6 SBF flash.

There are more stable roms built by quarx and epsylon3 in the defy development thread. Camera works and camcorder works for some users. These devs are geniuses.
Sent from my MB525 using xda premium

Should I install CM9 kernel?

I have a Defy, installed the 4.5.1 DHT25 rooted SBF.
Then I install CM9 using the instructions stated in this thread: http://forum.xda-developers.com/showthread.php?t=1618904
When I reboot, it goes to flash rom screen, showing error:
Err: A5,70,00,00,3D
Should I install the CM9 kernel as stated?
or as I'm using the 2.3.6 Defy+ SBF, I don't need to install CM9 kernel?

Ya u should install
I think cm9 won't work with 4.5xx kernels
Sent from my MB526 using Tapatalk 2

g440i said:
I have a Defy, installed the 4.5.1 DHT25 rooted SBF.
Then I install CM9 using the instructions stated in this thread: http://forum.xda-developers.com/showthread.php?t=1618904
When I reboot, it goes to flash rom screen, showing error:
Err: A5,70,00,00,3D
Should I install the CM9 kernel as stated?
or as I'm using the 2.3.6 Defy+ SBF, I don't need to install CM9 kernel?
Click to expand...
Click to collapse
You are using a 2.3.6 DEFY+ SBF? It's bl6 or bl7, either way you can not flash those kernel zips, they are meant for lower bl versions. Make sure you are flashing a Gingerbread (or jordanplus or DEFY+, it's named in many ways) ROM and skip the kernel flashing step.
pjgowtham said:
Ya u should install
I think cm9 won't work with 4.5xx kernels
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
What the hell? See this - link. Can you see 4.5.x in the middle of the name of every of those stock sbf files? Any ROM built for Gingerbread will work with any of those kernels.

Hi,
That partially answered my query. I would welcome if you could answer my query in some detail.
On my defy with green lens I first ported original stock Froyo then installed GGL ROM. After that I installed CM9-NIGHTLY-120617-Defy.zip but did not install any kernel.zip as suggested by other forums. And then installed gapps-ics-4.0.3-20111217 and most of the things including Opera Mobile, Camera except panorama/FC on stop thereof and GPS and few apps that I use. Opera Mini is not working where I live even via 3G.
Now my question was whether any GB kernel marked for Defy (or even Defy+) work for such CM9-ICS update.
My current kernel via GGL is [email protected] #1 Wed Apr 6 15:55:29 CST 2011.
Is there any other better kernel than the above that you my suggest?
Thanks.

kayyappan said:
Hi,
That partially answered my query. I would welcome if you could answer my query in some detail.
On my defy with green lens I first ported original stock Froyo then installed GGL ROM. After that I installed CM9-NIGHTLY-120617-Defy.zip but did not install any kernel.zip as suggested by other forums. And then installed gapps-ics-4.0.3-20111217 and most of the things including Opera Mobile, Camera except panorama/FC on stop thereof and GPS and few apps that I use. Opera Mini is not working where I live even via 3G.
Now my question was whether any GB kernel marked for Defy (or even Defy+) work for such CM9-ICS update.
My current kernel via GGL is [email protected] #1 Wed Apr 6 15:55:29 CST 2011.
Is there any other better kernel than the above that you my suggest?
Thanks.
Click to expand...
Click to collapse
If you flash a Gingerbread kernel (also named CM9 kernel) your camera won't work. Green lens doesn't have compatible drivers on Gingerbread.
Why would you want Opera Mini when you have Opera Mobile working?
If you want a fully functional ROM, I suggest you switch to some of the CM7.2 builds or MIUI Pikachu Edition or WIUI GB. These are all great, stable, fast and pretty much bug-free.
As for the kernels, changing them doesn't help much in my experience, but I do know that Epsylon somehow added some libraries (thought they are onlu meant to fix wifi tethering on CM9 as far as I know) in the Froyo kernel available on his site. You could try it - http://defy.wdscript.fr/kernel/ . (This one: kernel-froyo-222-179-4-signed.zip)
I see that you used the oldest gapps possible, I'm not sure why. Get the latest zip from here (ics version is for CM9, yes) - http://goo.im/gapps/
So, what I suggest to you if you want to stick with CM9:
1 - get the latest gapps, get that kernel and you already have the latest CM9
2 - full wipe (data/cache/dalvik)
3 - install zip - kernel
4 - install zip - ROM
5 - install zip - latest gapps
6 - wipe cache and dalvik (not necessary)
7 - reboot and see how it goes
Panorama still won't work after that, that's for sure, but I don't know what other problems you've experienced....

But why doesnt it work with 4.5.x kernels?
Mine s defy ...I'm using cm9 ( defy + gb kernel build) so cm9 doesnt bootup wid those kernels...why?
Sent from my MB526 using Tapatalk 2

pjgowtham said:
But why doesnt it work with 4.5.x kernels?
Mine s defy ...I'm using cm9 ( defy + gb kernel build) so cm9 doesnt bootup wid those kernels...why?
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
I really can't figure out what you are saying. Which CM9 build are you talking about exactly? Which kernel(s?) are you talking about exacly? Would be good if you could give me the links to both, so we can resolve the confusion

pjgowtham said:
But why doesnt it work with 4.5.x kernels?
Mine s defy ...I'm using cm9 ( defy + gb kernel build) so cm9 doesnt bootup wid those kernels...why?
Sent from my MB526 using Tapatalk 2
Click to expand...
Click to collapse
its work on DEFY
im on CM9-NIGHTLY-120609-Defy+.zip and 4.5.2_DHT-22_kernel work great
but u MUST flash cm9 kernel ...reboot and 4.5.2_DHT-22_kernel...
i dont know why it happened but i forgot to do it many times and my defy cant get even to recovery
i need to flash full SBF to fix this...i hate when its happened....(i will really glad if there are other way)
i really hope for that u done backup for your apps
p.s.
u must flash DEFY+ version for GB kernel
and DEFY for Froyo kernel

Thank you niksy on your info on kernels. However CM9 works well on defy with green lens except for the panorama mode.
I found the old gapps smaller in size. However after your post I reinstalled a later one.
I prefer Opera mini as it has a smaller mem footprint. Since mini is not working here I use Boat browser mini which is quite comparable to Opera mini in speed,
However I have one issue on CM9 when I copied SIM contacts. My phone book got bloated to over 3 times the size with some of the entries duplicated from 2 to 5 times!
With MIUI/WIUI/WP7 I feel the originality of Android is lost with those boxed icons.
Besides I read in one of the posts in xda that WIUI ICS is based on CM9.

[Q] Defy Jellybean CM10 Help!

*Don't respond with comments saying read this or that...
I have read the guides for moto defy mb525 U.S. tmobile and yet i don't understand a thing. I have a bionic and have rooted/flashed/sbf'd before so I have experience but not with this device. I tried understanding from the wiki and beginners guide yet it didn't help me at all. (I'm dumb)
MY Goal: Jellybean CM10 on my Defy
I am currently on froyo 2.2 and I don't understand how to get CM10
I have an original tmobile u.s. defy (Im pretty sure its green lens)
If someone can provide links I can learn:
What should I SBF to?
What should I use to root?
How do I flash cm9 kernel (I heard its the only way to get the CM10 working on a tmobile mb525)
Once I get a recovery I know how to flash and stuff I just want to be guided until I get to clockwork recovery and have the cm9 kernel flashed.
Please help, don't flame....its what makes this community great

Root it with SuperOneClick 1.9 for Defy! it should be somewhere on xda I dont know where use the search function...
Install 2nd INIT it should add cwm
Sent from my MB525 using xda premium

Sorry Sir but its useless to flash CM10(current version) on MB525 coz its being made for MB526(Defy+). Your efforts will be in vein. Why not go for 4.0.4 by Eppy? Latest build is stable as hell!

I read that you can flash CM10 by quark on your green lens defy but of course camera won't work

I got soft reboots. And the current version can't make calls/text.
Go for CM9 its really getting into its groove now
Sent from my MB525 using xda app-developers app

NI55AN said:
I got soft reboots. And the current version can't make calls/text.
Go for CM9 its really getting into its groove now
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
+1
Since you sound new to flashing roms, you shouldn't start off with an alpha rom you have to port, instead, start with an Epsy CM9 or Maniac103 CM7 -- both are stable and a good place to start learning about rom flashing.
***Before you start flashing sbf's, you should read the sbf thread and find an sbf you like that's on the same BL version you're currently on, or if out of warranty, flash a bl6 sbf so you can switch between the GB and Froyo kernels. I'm not going to go into BL versions anymore, but that's one of the most important things you need to learn when flashing Defy roms and sbfs.***
For rooting, I use SuperOneClick 1.9.5. Then just enable non-market apps and install Defy 2nd-Init Recovery, reboot into it, select wipe data\factory reset, then flash cm7 or 9 followed by the appropriate version of gapps. Those steps will soon become second nature, to the point where you can root and flash a custom rom in your sleep.
All the tools and roms can be found by searching the forums. Good Luck and welcome to the wonderful world of custom roms.

I got jellybean working thanks yall for the help.....its the kernel parts that threw me off but i learned

Google contact
sy0120 said:
I got jellybean working thanks yall for the help.....its the kernel parts that threw me off but i learned
Click to expand...
Click to collapse
Pls , how to sync google contact for Defy MB525 using Jelly Bean 4.1

Bé Yêu said:
Pls , how to sync google contact for Defy MB525 using Jelly Bean 4.1
Click to expand...
Click to collapse
Flash gapps for jb and then sync.
S3nt fr0m my D3fy/w1u1 GB st4BL3

nidhish91 said:
Flash gapps for jb and then sync.
S3nt fr0m my D3fy/w1u1 GB st4BL3
Click to expand...
Click to collapse
Thanks !
I installed GAP and working normal now ! Howerver , I must have install " File Manager " from Market .

Cant install MIUI GB

Hi,
I have a defy and recently i have flashed an Asian Defy+ sbf on my defy.
I have rooted it and installed the Defy 2ndInit...and then afterwards i tried to install the MIUI 2.4.13 GB stable version on it.
But the installation was not successful. I got an error at the boot loader screen....something like (Err: A5,70,00,00).
Can anyone guide me how can i install MIUI on my defy again. I have attached the screenshot of the kernel details here.
I know there could be some problem with the BL it dont exactly understand it....
Thanks....

You have a GB kernel and the ROM you are flashing is based on froyo kernel.

Shrewdy said:
Hi,
I have a defy and recently i have flashed an Asian Defy+ sbf on my defy.
I have rooted it and installed the Defy 2ndInit...and then afterwards i tried to install the MIUI 2.4.13 GB stable version on it.
But the installation was not successful. I got an error at the boot loader screen....something like (Err: A5,70,00,00).
Can anyone guide me how can i install MIUI on my defy again. I have attached the screenshot of the kernel details here.
I know there could be some problem with the BL it dont exactly understand it....
Thanks....
Click to expand...
Click to collapse
miui is based on the CM7 kernel for defy. The froyo kernel. There is no chance to get miui work on the defy+ GB kernel.
so if you weren't able to flash a froyo sbf (downgrade), you might use cm10.
Sent from my GT-P7500 using XDA Premium HD app