Related
hi!!
after i call someone and the party is busy it goes to lock screen... is this normal ? this only happens if i keep a phone near my ear so the screen is off by proximity sensor.. then when i hear a busy signal and want to press redial the screen is always locked.... ergh
thanks!
using cyanogenmod beta5
ive just asked some ppl around with nexus ones and they say its a usual behavior..
doesnt this annoy anoyone but me??? pretty strange
I just upgraded my Note to 4.0.3 ics and this problem has not gone away. Even after this upgrade the phone locks itself after getting busy signal.
Because of firm policy i have to have enabled phonelock.
And yes, timeout for locking is set to 5 min.
Is there any workaround for this
Neel-X said:
I just upgraded my Note to 4.0.3 ics and this problem has not gone away. Even after this upgrade the phone locks itself after getting busy signal.
Because of firm policy i have to have enabled phonelock.
And yes, timeout for locking is set to 5 min.
Is there any workaround for this
Click to expand...
Click to collapse
I recently purchased my first Android (Samsung Galaxy S3) and it has ICS 4.04 installed. I have just noticed the same issue....if I dial a number and the line is busy, the phone returns to the lock screen where I need to enter my phone password. If I don't place the phone to my ear it won't return to the lock screen. And if the call is answered, everything functions normally, returning to the phone dialler menu after the call is finished.
Does anyone else experience this problem? Is it "normal". Its a big pain as I run the phone through microsoft exchange at work and require password access.
Thanks in advance guys.
Driving me crazy. The screen lock insists on activating immediately after a call, necessitating a swipe to make a follow on call. SE support says that the phone does not do this. Am I missing something simple? Screen timeout is set loooooong.
mine does it too very annoying.... dont think anything can be done
You could switch the time out off completely.. that might work (I haven't tried it.. it's just a theory)..you can still lock the screen manually with the button on the top.
No it does not - set screen not to lock and the lock happens after the call . What bugs me is that SE says it does not happen! I wonder if they have the same phone
yes, it's an annoying issue. i tried a few apps including "no lock", "lockbot" etc. None worked well with my X10.
i have the same problem. after a call the screen locks. sometimes the screen even locks DURING a call
WTF!!!!!!!!!
Same over here. Lockbot latest version claimed they handled the issue of not opening the notification bar, but that's not true. After installing their latest version it was still not working. Ashame, because further on the program works quite well, and I really liked some themes of them.
So I am stuck to with this problem...
(Sorry for the not very helpful post, just wanted to know I am not happy with this too...)
Cheers,
Arnold
Hi - I'm not having this problem.. (so you're wondering why I'm posting? is it just to show off??!!)...
No.. I was wondering how many of you have task managers running? I've stopped using them, about 3 weeks ago and my phone has run much more smoothly since..
Something to try perhaps?
No task manager just a bleedin' scree lock that operates at the end of a call!!!!!!!!! VERY annoying - almost as bad as no bluetooth phonebook protocol but I have got over that for now.
Ice, if your phone does not do this what settings have you got in display eyc that may have affected the situation. Is it a branded phone? could that be it?
try "no lock", it works well on my X10i.
Except it appears to make the phone 'live' in your pocket as accidentally pressing a button lights up the screen and enables dialling to New York (other places are available) Not convinced.
PollPixx said:
Same over here. Lockbot latest version claimed they handled the issue of not opening the notification bar, but that's not true. After installing their latest version it was still not working. Ashame, because further on the program works quite well, and I really liked some themes of them.
So I am stuck to with this problem...
(Sorry for the not very helpful post, just wanted to know I am not happy with this too...)
Cheers,
Arnold
Click to expand...
Click to collapse
lockbot has to be purchased to use ..am i rite?
There is a free lock bot but don't bother it does not address the problem.........................................................
'Thank you for contacting the Sony Ericsson support centre.
Unfortunately there is no way to stop the handset locking when you have finished on a call, we offer apologies for any inconvenience this may cause'
Thank you SE. This after a month of telling me that it does not happen and that my handset is faulty!
I have a problem with my HD2.
Sometimes when i have my phone on my desk (with screen off/standby mode) i noticed that the backlight of the screen turns on but nothing happens... no notifications or anything...just turns on.
Today i discovered what it is. I texted a friend and in less than 2 mins he replied to me. The backlight again turned on but again there was no notification. I mean not at all. He sent me an sms but the phone doesnt display it! Also not in the messages neither in sense messages... (i am sure he did cause i called him and he told me he replied to my sms).
This means that i lost many messages....
Does anyone of you has noticed the same problem...?
If yes, is there a solution ?????
yes, it happens to me too, only i use hd instead of hd2. this sucks.
i had this issue before.
then i flashed the lastest firmware, currently using 1.72 firmware, and it is working fine now.
get the firmware from your local htc website.
I flashed the latest ARTEMIS rom v22 from the stock 1.66 and i just noticed that the phone does the same thing again....
So i guess it's a bug from the original messaging system.
Is there any solution to this...?
I start hating this thing..
Hey everyone, i decided to create a thread for all Atrix owners for all Hardware/Software issues.
The goal is to hopefully document all known problems so that owners can be aware of issues and possible solutions.
I don't have a Atrix myself, but 2 friends of mine do and i will post there issues and the problems we have had so far!
So please post all problems so that we can easily find issues here.
So 2 of my friends have the Atrix and man it's been ridiculous so far!
Friend M. the "mooseman", is on his 3rd Atrix!!!
-First issue he had on Atrix #1, the charge/battery low LED on the top right did not turn on ever! When charging or full battery or low battery, led never came on!
-Second issue on Atrix #1, the phone wouldn't want to charge past the 40% charge mark either using the wall charger or from usb power from a pc. Factory reset, removing battery and cycling battery no good.
Solution: Atrix was exchanged for a new unit.
Atrix #2 from the "mooseman"
-First issue was again a charging issue that got stuck at a percentage, i think it was at 80%, even after being left on wall charger for a hour, Again no good.
-Second issue was that the screen was "Flickering" mainly very noticeable on any black displayed on the screen. We first saw it on the home screen background on a black part of the background, tried resetting rebooting, no good!
Solution: Atrix was exchanged for a new unit. At the bell store the tech wasn't even able to access the sim card over usb on the Atrix with a special device they had to copy sim contacts and info.
"Mooseman" is on his 3rd Atrix and so far so good, for now. All his Atrix's were from Bell and running 2.2
Friend M-furries. the "Iranian Warlord", will be going onto his 4th Atrix!!!
-First issue with his Atrix #1, he was experiencing call connection problems and dropped calls if i remember correctly. Also he told me that it would turn on by itself sometimes.
Solution: Exchanged the Atrix for a new one.
-Issue on Attrix #2, he had rooted the phone and enable 3rd party programs within settings, phone was functioning fine and was rebooted many times without issue.
He then decided to download "Talking Carl.ipa" which is a iphone app lol, why, god knows, but he tried it and when he did it didn't work as expected and gave him a force close, he forced closed and when he did, the phone rebooted.
Only thing was that know it wasn't booting up at all! It remained on the pulsing moto bootup logo and did not boot, even after many attempts nothing.
He went into recovery mode and did factory reset, what happened after that?
His phone booted up except that the resolution of the screen was as if it was really high as everything including the main menu, taskbar icons, text, everything was supper small and very hard to see!!! Furthermore he tried the phone dialer and nothing, it would try to open then instantly close! So no more phone except if it was a incoming call . He then looked for a stock rom for the Atrix but didn't find any so he tried to install gingerblur rom and still no good, everything was super small and phone dialer still closed when launched! We downloaded all drivers, moto agent and motorola sync and could you believe that there is no emergency firmware recovery within motorola sync!!! No recovery or option to upload a firmware, wtf!!! The samsung galaxy S had that option through Samsung Kies, as does the iPhone from iTunes, what the hell motorola!!! Called there tech support and it was useless, they tried a ota update lol!
Solution: Exchanged the Atrix for a new one.
-Attrix #3, he had it for a couple of weeks and now he is getting an issue with the screen "Flickering", it appears to be "Flickering" on the top status bar!!!
Solution: "Iranian Warlord" will be sending this unit in to get another one!!! He will be on his 4th Atrix!!! lol! All his Atrix's were also from Bell and running 2.2
Mods, can we make this a stickey?
Tell us more..
Well hopefully he will have a good unit when he gets his 4th Atrix, i hope! I'll let you guys know as soon as he gets it.
Update: Actually my friend with the "Attrix #3, he had it for a couple of weeks and now he is getting an issue with the screen "Flickering", it appears to be "Flickering" on the top status bar!!!"
After further investigation, It's actually the whole screen that was flickering, furthermore it only appeared when the battery was around 20%, however it disappeared as the battery further discharge towards the 5% battery level, strange indeed. Perhaps somethings up with the power management.
We also found out that there is a Bell update for 2.2 that fixes a couple of bugs, so we'll try that out on his phone and after testing it for a while I'll post here any updates from it! Hope that it works because these are awesome superphones!
We are going to try this update first before getting the 4th atrix.
speeman2049 said:
-Issue on Attrix #2, he had rooted the phone and enable 3rd party programs within settings, phone was functioning fine and was rebooted many times without issue.
He then decided to download "Talking Carl.ipa" which is a iphone app lol, why, god knows, but he tried it and when he did it didn't work as expected and gave him a force close, he forced closed and when he did, the phone rebooted.
Only thing was that know it wasn't booting up at all! It remained on the pulsing moto bootup logo and did not boot, even after many attempts nothing.
He went into recovery mode and did factory reset, what happened after that?
His phone booted up except that the resolution of the screen was as if it was really high as everything including the main menu, taskbar icons, text, everything was supper small and very hard to see!!! Furthermore he tried the phone dialer and nothing, it would try to open then instantly close! So no more phone except if it was a incoming call . He then looked for a stock rom for the Atrix but didn't find any so he tried to install gingerblur rom and still no good, everything was super small and phone dialer still closed when launched! We downloaded all drivers, moto agent and motorola sync and could you believe that there is no emergency firmware recovery within motorola sync!!! No recovery or option to upload a firmware, wtf!!! The samsung galaxy S had that option through Samsung Kies, as does the iPhone from iTunes, what the hell motorola!!! Called there tech support and it was useless, they tried a ota update lol!
Click to expand...
Click to collapse
Sorry to say but your friend is an IDIOT there! Like really? What was he thinking loading an iPhone app. It's OBVIOUS that it WON'T work. I mean if it was THAT easy, we'd have ALL of the iPhone apps running alongside with our android ones! Second this is in no means a fault on the Atrix. This is purely HIS fault. Your friend took the chance too root. He should have done his research and had he, he would have read in basically every ROM/root thread here that THE BELL ATRIX does NOT have a SBF to fall back.
I'm just surprise that Bell would let you exchange the phone because once you root, you lose your warranty.
fairly happy with 2nd one BUT !!! .....
My 2nd Atrix works OK so far. The first had the voice quality issue.
I still have 2 big problems:
1. WiFi crashing router. After some time (sometimes many hours) my router will crash (needs full restart/unplug). I put the Atrix on its own router so it does not affect the rest of my home network.
This happens with my Actiontec (FIOS), D-Link Dir655 and Linksys WRT54GP2 (super old but thats what the Atrix is currently on)
My DIR655 is running pretty old Firmware but I just dread redoing all my setup/config if I go to the latest 1.3x.
Does anyone here use the Atrix on a DIR655 N router without problems?
I turned Wifi sleep of on the phone etc, etc but still!
Pretty annoying but I can live with it. My first Atrix did exactly the same.
2. VOIP mic problems! Skype, sipdroid etc... Its supposedly a problem with the MOTO implementation of the AudioSource Object. Its very limited and does not allow commonly used settings. I read that you can also only use the back mic.
I wonder what MOTOs official statement on that is?
Its true and I told him that he was retarded for even trying that lol! Luckily he was able to change it! However he is still having issues with this atrix, he's waiting for the bell ota update to fix a bunch of bugs on 2.2
My 2 friend's haven't had any wifi problems though, perhaps its the router your on? Wifi has always worked on all they're atrix's that they had so far!
Issues:
1. The LED (one of them would flicker and then go off).
2. The voice quality on the phone. Everyone would tell me I sounded muffled.
3. I have a problem with network error on the Market app.
4. If I leave my finger relatively still on the screen for longer than 15 secs, the will stop responding for a few secs and go crazy. (This happens with all units. It's a "feature" on the phone). Kind of makes it hard to play games.
5. I can't lay down the phone on any surface that is not flat, as the LCD will not work (ie. bed)
6. I get randomly disconnected from the AT&T network.
7. I get a few reboots per week. Sometimes in the middle of a call.
That's all. Besides those things, the phone...is still horrible.
spacev said:
Does anyone here use the Atrix on a DIR655 N router without problems?
Click to expand...
Click to collapse
I'm actually using a DIR655 and I don't have any problems. Then again, I'm using firmware 1.33NA. That's bizarre though, I've never heard of a device crashing the router. I'd recommend that you bite the bullet and upgrade your firmware. You do know that you can save your current configuration, right? It's under:
Tools > System > Save to local harddrive
Love this phone so far. Luckily I haven't noticed any of the mentioned problems. Except 1, with VOIP, it doesn't seem to be working properly. Yesterday I tried Skype, tried speakerphone, tried headset, tried BT, nothing worked, I can hear the caller, but they can't hear me at all. Now today I tried again, I can still hear them, and there is a weird progress, they can hear me, not with BT, but with headset and speaker both, but my voice as they say was very broken, noisy, too much disturbance etc...
Besides this issue, (M)Atrix rocks!!!
Atrix just wont connect to mobile data, it will tease you with showing you there is an H+ connection available, but it wont let you axx it..
And it worked fine for one day x.x
wirednix said:
Issues:
1. The LED (one of them would flicker and then go off).
Click to expand...
Click to collapse
no issue here on that...not sure what to suggest :/
2. The voice quality on the phone. Everyone would tell me I sounded muffled.
Click to expand...
Click to collapse
hmm...I remember reading that people that had this issue, when they lowered the noise cancelation feature, they didn't sound muffle anymore. Maybe you can try this out? I don't have this issue, so not sure if that will help.
3. I have a problem with network error on the Market app.
Click to expand...
Click to collapse
Are you still getting this on WIFI? I know sometimes the Market acts up on its own, though I haven't heard of it happening recently.
4. If I leave my finger relatively still on the screen for longer than 15 secs, the will stop responding for a few secs and go crazy. (This happens with all units. It's a "feature" on the phone). Kind of makes it hard to play games.
Click to expand...
Click to collapse
hmm...got to try this to see if I have this issue.
5. I can't lay down the phone on any surface that is not flat, as the LCD will not work (ie. bed)
Click to expand...
Click to collapse
I've noticed the opposite accutally...if the phone is ON a flat surface, it doesn't respond properly. Like multiple times I am required to click on an icon shortcut on the homescreen.
7. I get a few reboots per week. Sometimes in the middle of a call.
That's all. Besides those things, the phone...is still horrible.
Click to expand...
Click to collapse
I think you should exchange it for a different phone :/ I know the reboot issue is fixed with the 1.5.something update for AT&T.
CrazyMcCool said:
Atrix just wont connect to mobile data, it will tease you with showing you there is an H+ connection available, but it wont let you axx it..
Click to expand...
Click to collapse
Have you forced trottle your network to only be 3G? Are you in a known weak 3G area when that happens?
I have N910C and I updated it to Lollipop. After the update I've got the annoying answering lag (delay for about 1-2 secs until other party can hear me).
I know about the solution to wait a bit until saying hello, but I can't get used to it, so I always end up saying hello two times, it's so annoying. And even worse, during that 1 sec, if I reach my ear with the phone too quickly, the screen stays on, even if i answered the call, so I need to put my phone away and back to my ear to shut the screen off. Also noticed and in regard to what I said, when the phone is ringing, I slide the slider to answer, it takes those 1-2 secs for the screen to switch from "slider" screen to "in call" screen...
Anyone having the same or similar issue? Any solution? I have been searching the forums already, and the latest posts about the issue are quite old and do not provide the solution.
I'm on stock BOB4.
Any help would be appreciated.
I am also interested in a solution, because i am facing the same problem. 910c with LP
admir83x said:
I have N910C and I updated it to Lollipop. After the update I've got the annoying answering lag (delay for about 1-2 secs until other party can hear me).
I know about the solution to wait a bit until saying hello, but I can't get used to it, so I always end up saying hello two times, it's so annoying. And even worse, during that 1 sec, if I reach my ear with the phone too quickly, the screen stays on, even if i answered the call, so I need to put my phone away and back to my ear to shut the screen off. Also noticed and in regard to what I said, when the phone is ringing, I slide the slider to answer, it takes those 1-2 secs for the screen to switch from "slider" screen to "in call" screen...
Anyone having the same or similar issue? Any solution? I have been searching the forums already, and the latest posts about the issue are quite old and do not provide the solution.
I'm on stock BOB4.
Any help would be appreciated.
Click to expand...
Click to collapse
New update is here to help you, update to latest lollipop & hope for the best.
Unfortunately, the problem is still persistent after the latest update.
Any suggestions?
admir83x said:
Unfortunately, the problem is still persistent after the latest update.
Any suggestions?
Click to expand...
Click to collapse
factory reset may solve your problem.
jdomadia said:
factory reset may solve your problem.
Click to expand...
Click to collapse
Any other solution? I have my bank app, and some other apps, that wont work after the factory reset.
It seems that only the two of us have this problem only.
I have the Polish Lp.
bairas said:
It seems that only the two of us have this problem only.
I have the Polish Lp.
Click to expand...
Click to collapse
I'm on Polish too.
Have you tried the factory reset?
Not only you I have this problem too, but not always, and yes I tried factory reset before and after flash firmware
No, I haven't tried factory reset (~600 Apps), and thankfully that wasn't the solution as the other person tried that with no success.
This only happens when I answer the phone, and not when I call and the other persone anwers it. In that case everything is normal.
I am pretty sure that other also have faced the same problem but didn't noticed it yet. Time will tell...
I have the same problem to.
Now I'm glad that I didn't try factory reset. It would be for nothing...
I didn't have this problem with Kit Kat. I just hope they will address it in the next update. It's so annoying...
I just wanted to ask the very same question - I've now trained myself to put the phone to my cheek AFTER it switches the graphics from the green circle being complete (phonecall being answered) to the actual call icons, but this is, frankly, ridiculous.
Anyone fixed this in a new upgrade?
who live in Poland or know poland pls write in their samsung site about this problem.
SUNUN said:
who live in Poland or know poland pls write in their samsung site about this problem.
Click to expand...
Click to collapse
I'm not sure this is really specific to polish roms though?
Domen Lo said:
I'm not sure this is really specific to polish roms though?
Click to expand...
Click to collapse
First this avialabke in polish rom now it will be in other country roms who live in this countris writevto their samsung suppory plssss
SUNUN said:
First this avialabke in polish rom now it will be in other country roms who live in this countris writevto their samsung suppory plssss
Click to expand...
Click to collapse
any solution, who have write to the samsung support? who live in poland?
---------- Post added at 12:07 PM ---------- Previous post was at 11:29 AM ----------
i wrote about this problem to Samsung Romania, waiting for answer.
Pls who is able write to their samsung support to
Any fix?
Same bug. Factory reset & wipe cache didn't help.
Croatia VIPNet LP 5.0.1.
I have activated answer call with home button and then deactivate it (from call setting answering/ending Calls) . After that call answer delay decrease . It seems it fixed Could you try it and share your experience ?