Database Users

How to auto lock wm6.5 when turn off?

Hi all,
Do you know how to auto lock wm6.5 when you turn off the mobile? I speak about the "standard" lock screen not a software like S2U2.
Thanks in advance for the tweak.
Regards, Sylvain.

you can use smartlock : http://forum.xda-developers.com/showthread.php?t=505032

Or you can just check the Auto Lock in the Lock Settings. Then every time you boot the phone, turn on the screen, etc... it will prompt for your 4 digit pin and slide to unlock.

player911 said:
Or you can just check the Auto Lock in the Lock Settings. Then every time you boot the phone, turn on the screen, etc... it will prompt for your 4 digit pin and slide to unlock.
Click to expand...
Click to collapse
Hi,
Thanks for your answer but I would like to lock the phone without a digit pin. I don't know if there is a registry key for that or something I can change with Advanced Configuration Tools, HTCPedia, HD Tweak...
I'm sure I have seen an old post with this kind of trick but I can't find it that's why I need your help.
If you have another idea...
Thanks

vinsyl said:
Hi,
Thanks for your answer but I would like to lock the phone without a digit pin. I don't know if there is a registry key for that or something I can change with Advanced Configuration Tools, HTCPedia, HD Tweak...
I'm sure I have seen an old post with this kind of trick but I can't find it that's why I need your help.
If you have another idea...
Thanks
Click to expand...
Click to collapse
http://thewingster.com/autolockscreen.aspx
Does exactly what you want! Remember to configure it after installing, under Start - Settings - System - Smart Lock.

You can"t do it by changing a registry key. A light application to auto-lock is LockDevice, link (and other applications links) here : http://forum.xda-developers.com/showthread.php?t=550973

or simply use smartlock ... it's the easiest way to lock your device

I realise that this might not help you but, if you hold down the hang up button for 1 sec another menu appears and you can press lock. it also has other functions on the menu like cancelling data connections turning flight mode on etc.

In need of urgent help - PIN number

Ok so I dont know what happened. I installed this medaldetector app for my phpne. I installed it and ran it and then it sor of had a spaz attack. Had no idea to close it so I took the battery out. (This might have nothing to do with my issue) So when I started up my phone it asked me for a pin number. I never use a pin number and I do not recall turning the option on to use one. So now I cant call or txt or anything like that without the pin.
So I am really stumped. Help me out please.

exiilez said:
Ok so I dont know what happened. I installed this medaldetector app for my phpne. I installed it and ran it and then it sor of had a spaz attack. Had no idea to close it so I took the battery out. (This might have nothing to do with my issue) So when I started up my phone it asked me for a pin number. I never use a pin number and I do not recall turning the option on to use one. So now I cant call or txt or anything like that without the pin.
So I am really stumped. Help me out please.
Click to expand...
Click to collapse
try your sim card in a different phone and see if it asks for pin code. if it does, somehow pin verification got activated. you need to find the little card that came with your sim card which has the pin code and puk code. if you can't find it, call your operator, they will give you those. (puk code is used when you entered your pin code wrong 3 times) good luck.

Thanks alot... Helped

I have WinMo 6.5.5 on my phone and can't find where to turn off the Pin verification? Anyone know how to do this?

On your home screen, scroll accross to the end (Setings). Tap menu and press All Settings. Go to Personal and then to Phone. You should be able to disable it there.
Alternatively, you could just tap your top menu bar. There should be an icon for your service provider, just tap that and it should directly take you to the option you want.

exiilez said:
On your home screen, scroll accross to the end (Setings). Tap menu and press All Settings. Go to Personal and then to Phone. You should be able to disable it there.
Alternatively, you could just tap your top menu bar. There should be an icon for your service provider, just tap that and it should directly take you to the option you want.
Click to expand...
Click to collapse
Thanks! I found it hidden under the "GSM/UMTS Service"

Secret Menus

Secret Menus
EDIT: ROOT NOT NEEDED FOR THIS TO WORK.
This is a list of the codes to get into the secret menus on the SF. The list has been complied mostly by egg_head over at XDA, as well as a few others.
I shouldn't have to say it, but I will..
I nor this forum or the op is not responsible if you brick your phone.
Play with these things at your own risk.
Even if I said it's been tested by me and confirmed to work.
It's not my fault if your phone takes a crap on you.
Make a backup of your phone.
Some members of another forum where having trouble using these codes and I've discovered that you need Hidden menu enabled. To enable Hidden menu, do the following:
Go into the Dialer and enter *#83786633 then press the Home key
Go back into the phone dialer and enter *#22745927
Now a box will come up asking for the SPC code. Enter 000000
Press the Hidden menu Enable radio button.
Now you can use these codes.
The dialing code string you have to use is *##
Here are some things you can gain access to
Audio Tuning
*#28346#
Several audio tuning menus.
I've only tested the two items below:
To silence boot and shutdown audio go to Situation/BOOTSOUND and turn the values to 0. I've tested and confirmed this works.
To silence the volume key audio when turning the volume up/down go to Situation/VOLUMEKEY and turn the values to 0. I've tested and confirmed this works.
Full Bat Popup
*#3844228#
This allows you to disable the full battery pop-up.
I have tested this and it works successfully.
HwCodec
*#0002*28346#
Audio path volume controls. Most importantly, it looks like there's a sidetone adjustment.
I have not tested any of these items yet.
Shutdown
*#7594#
This enables you to shut your phone off by long-pressing the power/lock key.
No more pop-up confirmation.
I have tested this and it works successfully.
I also need to point out that this disables your slide lock screen.
Diag/Testing Mode
*#4636*1111#
GPSSetup menu
*#1472365#
The settings are set to the "fixed" values by default.
You can go into Command and then start GPS and force a satellite lock.
There's other cool info there too.
*#7594#
If your enable this, it appears to not only shutdown your phone with a long press of the power key, but it also disables your lock screen (puzzle/glass screen).
Enter GPS debug/settings application by typing *#1472365#
click "Setup" tab
click "position mode"
Click "starting mode
Enable "Cold Start"
Back out.
Other Codes (thanks Dlwicksel!):
*#1472365# - GpsSetup
Very useful tests for the GPS!!!
Setup/Position Mode/ Operation Mode: (Standalone/MSAssisted/MSBased) Starting Mode: (Cold Start/Warm Start/Hot Start) Session Type: (Single Fix/Navigation) Setup/Command allows you to test the GPS and look at the results
*#INFO*1111# - Testing
Phone information/Battery information/Battery history/Usage statistics
Very useful diagnostics
*#0*# - LCD TEST
red/green/blue/melody/vibration/dimming/megacam/Sensor/touch/sleepmode/LED/RECEIVER
Very useful tests for the LCD
##RTN# - Real-Time Network (RTN)
Lots of useful information, like the Life timer / calls and Life Byte usage stats
*#DATA*727336*# - DataCreate
Call log/System Space/User Space/Phone Book/Schedule/Message/Ring tone/Screen/IMEI/ESN/Error log
Very useful information!!!
*#0228# - BatteryStatus
Very useful real-time battery statistics!
##UPST# - PhoneUtil - UART/USB
Universal Asychronous Receiver/Transmitter / Universal Serial Bus
Most likely controls how you connect technician testing equipment to test out the UART/USB subsystems
##DATA# - Data Programming - (Verizon customers: whenever prompted for SPC enter 000000)
User Name/Advanced/Restore/Enable HFA/DSA Server/MMSC/URL/Multimedia/WorkMode/WiMAX
##DEBUG# - Debug Menu - (Verizon customers: whenever prompted for SPC enter 000000)
Debug Screen/Test Calls/RC Data/HDR/1X Selection/Voice Privacy/DTMF Set/Korea Mode Set
##AKEY# - Data A key menu - (Verizon customers: whenever prompted for SPC enter 000000)
##<MSL># - (Verizon customers: whenever prompted for SPC enter 000000)
Program your Mobile Device Number(MDN) and Mobile Station ID(MSID)
##GPSCLRX# - Reset the GPS - (Verizon customers: whenever prompted for SPC enter 000000)
##SCRTN# - Changes DSA back to Factory - (Verizon customers: whenever prompted for SPC enter 000000)
##TTY# - TTY TestMode
*#0842# - Device Test - Vibration Test
*#0673# - MelodyTest
*#7780# - Factory data reset
*#232331# - BluetoothTest
*#2664# - Touchscreen Accuracy Test
Nice if you want to see how accurate your touchscreen is
*#0283# - ServiceMode - PACKET LOOPBACK
Need to hit home to get out - I couldn't get this to do anything but it could be the data packet that you sent coming back to you on the loopback device
*#767*3855# - Factory Format - WARNING!!!
Will go to Hands Free Activation
Nice if you'd like to reactivate your phone, it will do so automatically
*#197328640# - ServiceMode - Menu key to bring up menu - WARNING!!!
Will turn off your radio - Not sure what this does
*#0011# - ServiceMode - Force Closes - Menu key to bring up menu
Will turn on your radio, and then reboot
*#32489# - ServiceMode - Force Closes - Menu key to bring up menu
Doesn't seem to affect the radio
*#2580# - ServiceMode - Not sure what this does
*#0782# - RTCTimeRead - Displays Date and Time
*#745# - Sec_RIL_Dump - Has the LogFileList
Copy to phone memory/Copy to SD card(grayed out)/View Ril Log(grayed out)/Clear Ril Log/Exit
Probably dumps the logs for the Radio Interface Layer (RIL) between the Operating System and the phone's radio and modem
I haven't tested a dump yet
*#9900# - SysDump
copy logcat/dumpstate/dumpsys/enable debug log/copy/watchdogdumpstatelog
Probably dumps the logs for the Operating System kernel
I haven't tested a dump yet
Updated above info. Wherever instructed to enter an SPC code, dial 000000. The differs from Sprint customers who have to enter an MSL code, which they typically don't have.
The code to change the voice codec EVRC to EVRC-B has been found. Just follow the directions below. If it dials the code you entered then you need to follow the steps in the first post to enable the secret menus.
Open the dialer then press
**772
SPC code 000000
The bottom of the screen will have buttons that are directional like a d-pad.
Press down until you see:
SVC Mode NAM1
End of BASIC NAM
Exit
Press right once you will see EXIT change to MORE
Hit enter
Press Down once and you will See
HomePage VoiceSO
EVRC
Push right button to change to EVRC-B
Hit OK Phone will reboot
I made a few calls after this and was told by everyone that the quality was so much better.
WARNING!!!!
THIS COMMAND
"##GPSCLRX# - Reset the GPS - (Verizon customers: whenever prompted for SPC enter 000000)"
FORCES THE SAMSUNG MOMENT TO LOOP RESTART FOR APPROXIMATELY 5 MINUTES UNTIL IT FINALLY REBOOTS THE PHONE.
I HAVE TESTED THIS, AND WENT TO SPRINT STORE, WHERE THEY JUST REPLACED THE PHONE
I'm not sure what it would do with the fascinate...
I have used the hidden gps menu alot, but when i tried the "##GPSCLRX# command it made the Samsung loop restart, it would reboot itself for 5 or 10 minutes before finally booting to home screen
I read on another forum (don't remember which one) that it clears the GPS then functions as i said above, the posters fix was to boot to recovery and restore phone to factory defaults.
i was unable to boot to recovery using his key sequence (volume down, power key and camera simultaneously)
I want use the secret menus, but am having issues with the first steps. I am supposed to go into the Dialer and enter *#83786633 then home, then after entering *#22745927 do I do something else bc nothing cues me to enter SPC code??
Thanks!
Here is what you do. You enter the first code, then go home. Back to the dialer and delete the first code then enter the second. after that a screen pops up asking for the password or whatever it is then enter 000000. after that start entering whatever codes you want. It confused me too at first.
On android 2.2, there is listing for mms provisioning in ##DATA#. It asks for the lock code. I tried the SPC but it does not work. I also tried other possible lock codes. What could be the lock code?
##DATA#
MMS provisioning Lock Code = 500667
Hey guys, the hidden menues don't really work after 2.2. I remembered that TSM parts in the COMRom had it already accessable though.
You can also read this link. I have not verified it yet but looks to take care of your full battery pop up issue.
[MOD] Turn off Full Battery popup/notification - EB01 UPDATED 2/17 - xda-developers
EDIT: You will have to be rooted to apply this though
Disable Lock Screen
Hey I was wondering if you were able to get this to work...I upgraded the software the other morning and now no app bypasses the lock screen...I use NoLED as well, and if I can get the lock disabled and be able to use NoLED I would be golden, for some reason that whole lock thing just pisses me off ;o)
I went to the dialer punched in the codes to unhide the menu, I assume all I have to do is hit send? Didnt work... am I missing something?
Disable Lock Screen
I know I am a little later here but I was wondering if anyone was able to get this to work...I upgraded the software the other morning and now no app bypasses the lock screen...I use NoLED as well, and if I can get the lock disabled and be able to use NoLED I would be golden, for some reason that whole lock thing just pisses me off ;o)
I went to the dialer punched in the codes to unhide the menu, I assume all I have to do is hit send? Didnt work... am I missing something?
Use at your own risk and backup your phone first, then you can try the below which worked for me.
To disable it without using an app or rooting your phone, you can enable the Hidden menu by doing the following:
Go into the Phone dialer and enter *#83786633
Press the Home key
Go back into the phone dialer and remove the previous numbers
Enter *#22745927
A menu box will prompt for the SPC code. Enter: 000000
Press the Hidden Menu Enable radio button.
Now you can use the below codes to do the following:
Disable Full Bat Popup:
*#3844228#
This allows you to disable the full battery pop-up.
Enable quick Shutdown and disable swipe screen:
*#7594#
Disables your slide lock screen completely.
This enables you to shut your phone off by long-pressing the power/lock key.
By-passing the pop-up confirmation and mode selection.
Again, do so at your own risk... Done this twice successfully on 2 separate Fascinate phones.

Why? There are threads and websites and blogs listing this stuff already. Pointless post.
Sent from my Incredible 2 using XDA App

I usually don't say anything against ANYONE, but if you google this stuff you will find out that... this is the same post as many others, and I mean identicle.. as in copy and pasted from there to here.

I wanted to try this out for the gps, however its not working for me. Does this work for CM7 or just TW? I cant seem to access hidden menus.

I can only access *#*#4636#*#*, no others?

I can only access *#*#4636#*#*, no others?
You have hit *#22745927 then enter 000000 in the SPC code to enable the hidden menu's
I gather the codes up and put them in one thread I thought might make it easier on the ones looking for them if you got a problem with don't open the thread!!!!

No dice on any key combo I've tried. I found in another forum for different phone that cm7 doesn't work with these codes.
Sent from my SCH-I500 using xda premium

wideopn11 said:
No dice on any key combo I've tried. I found in another forum for different phone that cm7 doesn't work with these codes.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Tw only.
Sent from my Incredible 2 using XDA App

times_infinity said:
Tw only.
Sent from my Incredible 2 using XDA App
Click to expand...
Click to collapse
Thanks for confirming. OP should add that little detail.
Sent from my SCH-I500 using xda premium

Here's a code not many people know... if you do *#5318008#* and turn it upside down it gives you a secret message.
Sent from my MIUI SCH-i500

sageDieu said:
Here's a code not many people know... if you do *#5318008#* and turn it upside down it gives you a secret message.
Sent from my MIUI SCH-i500
Click to expand...
Click to collapse
Wow dude... seriously? Lol -wow
Sent from my SCH-I500 using xda premium

sageDieu said:
Here's a code not many people know... if you do *#5318008#* and turn it upside down it gives you a secret message.
Sent from my MIUI SCH-i500
Click to expand...
Click to collapse
sagedieu you are my new hero... and i'd like to say thanks to modman72 for this thread, very helpful to have it all in one place. for some of us this is the first place we've found with it all together. it would be great to see more codes and maybe a beer.

Is quick pin unlock possible?

I really liked this feature in AOKP. When you enter your pin code to unlock the phone you don't have hit ok. The phone automatically unlocks after the 4 digit pin is correctly entered. Hoping a developer might be able to add this mod to the G2..

black05x5 said:
I really liked this feature in AOKP. When you enter your pin code to unlock the phone you don't have hit ok. The phone automatically unlocks after the 4 digit pin is correctly entered. Hoping a developer might be able to add this mod to the G2..
Click to expand...
Click to collapse
Wrong section. This is a development thread not a Q&A thread. Mods move this please.

Any app for dual screen

Hi just wonder is there a way to make add any app run with dual screen ??

Oh, yes, sure. Get root, find /system/etc/xml/multiwindow_whitelist_apps.xml file, open it with any text editor that supports root and put there something like
Code:
<mw_nonsystem_app package_name="xxx.yyy.zzz" />
where xxx.yyy.zzz is you app package name. You can see you package names with 3C Toolbox or any other application manager, or get them from /data/app by taking the application folder name and removing the last 2 symbols from there (was: "com.mypackage.myapp-1", will be "com.mypackage.myapp") or see them on Google Play website in the URL of your application.
After you edited the xml, reboot and your app will support multiwindow mode. If it still doesn't, make sure you didn't make a mistake in the package name (Pro versions of free apps can have different package names) and go to Settings->Apps->Menu->Show system processes->HwDualWindowLauncher, clean its data, reboot and try again.

Its work prefect, Thanks @Slavon-93, How can i remove all lock its require disabled by administrator??

Found this solution nearby.
dabo2100 said:
I had the same issue lastnight.. this is what I found and works for me:
1st step : create a pattern lock and for emergency PIN code to 0000 .
2nd step : go unlocking screen by pressing the power button.
3rd stage: try to unlock 5 wrong times, the phone will ask you to wait 1 min, after that go to Backup PIN.
4 th step : enter the PIN secour 0000 , the phone will return to the lock screen option with sliding always grayed out, DO NOT CHANGE.
5 th step : go unlocking screen by pressing the power button , no more multipoint , the slide is given by default!
Click to expand...
Click to collapse

Not working from step 3 its not request a pin

EidQtr said:
Not working from step 3 its not request a pin
Click to expand...
Click to collapse
It won't. After you enter the pattern wrong 5 (or more) times, the tablet will block the input and you will see an Emergency PIN button to the right of Emergency call button. If you don't, just lock and unlock the screen.

Its wifi version not LTE

EidQtr said:
Its wifi version not LTE
Click to expand...
Click to collapse
Don't know then. I don't think Huawei made it like: "You forgot your pattern? - Ha-ha, loser." There surely must be a button for emergency PIN input somewhere on the lock screen.

Slavon-93 said:
Don't know then. I don't think Huawei made it like: "You forgot your pattern? - Ha-ha, loser." There surely must be a button for emergency PIN input somewhere on the lock screen.
Click to expand...
Click to collapse
No its don't i hate the way they make there launcher.