Database Users

[Q] Stuck after an Official Update

Hello everyone.
I just bought a Nexus 7 version 2012 with the original stock ROM Android 4.2.1
And before applying the root / install a recovery or anything else, I decided ( Big mistake from me ) to update the firmware with the official version Jellybean 4.3 with the official method ( Parameter > Update firmware to Android 4.3 )
The Nexus reboot on bootloader and start the update, but after 30 secondes, install failed and I got a message called " Error" on the middle of the screen with the Android logo down.
Now, I'm stuck on bootloop on the " X " logo after "Google".
I tried the Full wipe but nothing changed because it doesn't affect the Bugged Firmware.
Apparently the solution will be to download something else with USB cable on ADB Sideload. But my USB debugging isn't enable...
I'm stuck with the official version and got no root, no revovery, nothing... just an official bug.
If someone have any solution I will be very grateful... Or should I have to send it to Asus with the Warranty ?
Thank you very much.

I think you just can flash factory images from bootloader and you good to go

martikung said:
I think you just can flash factory images from bootloader and you good to go
Click to expand...
Click to collapse
Problem solved, I restored it with Nexus Root Toolkit after unlock the bootloader and Flash Stock in Current status Soft-Bricked mode.
Thank you.

[Q] Please help mates, I got a problem with a kernel!

Hello everybody, I was wondering if you could help me with this problem.
I got an lg g2 D802, I was on the official kit kat rom with knock code, with Dorimanx kernel 7.1, everything was ok, Im using the right baseband from kit kat, but I changed the rom to Paranoid Android new version, doing a full wipe/ clean install. But the first hours of use I noticed that my phone was overheating, so I started to read bout that, and I realize that Dorimanx kernel wasn't for PA Roms, only for stock based, so I decided to change my kernel, I wasn't sure what kind of kernel I need, so I search a bit and a page says that PA Roms was AOSP based, then I downloaded Furnace Kernel 2.5.1, AOSP version, flashed it and when the phone reboots, it repeatedly say: com. android.phone process has stopped. So technically I wasn't able to do anything. I boot into recovery again and try to flash stock kernel for kit kat, and when the phone tries to boot, an lg logo appears and say: Security error. I reboot into recovery once again and try to re- flash Dorimanx kernel, because it was late night and I wanted to sleep, so I though, just need the phone to boot and tomorrow I will change the kernel to a correct one, but when the phone tries to boot, got stuck in lg logo and the led flashing, since that, I ve been trying to flash so many kernels, included furnace stock version and cm version, with no result, I tried too cloudyfa, auxilium, stock, PAEK and nothing seems to work.
I did my backup when I flashed PA, but cause first hours seemed to be ok , I deleted it for storage reasons, so now i cant restore any backup, and I know doing a full wipe /clean install again will solve this problem, but I don't want to lose all my files and photos and stuff from years ago, and I know that is possible to flash a kernel and boot with this rom because when I flash furnace AOSP the phone turn on and show my lock screen and desktop, but the com.android.phone has stopped problem appears and don't let me do anything.
So, I ask to you: What can I do to flash the right kernel and don't lose my stuff?
Thank you for your answers and sorry for my bad English.

@Delintg2 Why don't you just flash paranoid android again? Flashing the rom changes the kernel as well

Art Vanderlay said:
@Delintg2 Why don't you just flash paranoid android again? Flashing the rom changes the kernel as well
Click to expand...
Click to collapse
Ive tried too, with no result, stuck o lg logo, and now the adb sideload say sending package and when 100% nothing happens on the phone :S

Delintg2 said:
Ive tried too, with no result, stuck o lg logo, and now the adb sideload say sending package and when 100% nothing happens on the phone :S
Click to expand...
Click to collapse
You have to flash the sideload zip when that's done. If you still can't boot into your ROM then its back to stock town for you I'm afraid. We've all been there :highfive:

Art Vanderlay said:
You have to flash the sideload zip when that's done. If you still can't boot into your ROM then its back to stock town for you I'm afraid. We've all been there :highfive:
Click to expand...
Click to collapse
Ok backing to stock :S, ty anyway m8

Restore back to Stock Original Motorola Firmware Titan(XT1068) in OneClick

ONE Click Warranty Back
hello Friends This My First Thread on G 2014(Titan)
Now Get Yours Warranty Back In just one Click
No need to rememberer all this such big commands of FastBoot
i gonna present the simplest way to revert back to stock official Roms with both locked and unlocked Boatloader(after flash) which r Provided in the below links
Pls do press thanks If u really liked my work i need it :good:
best simple way in simple one click (action performed)
!!Disclaimer!!
NOTE: I am not responsible for any kind of boot-logo, corrupt partition,bricked devices, dead SD cards,other Issue etc As I am just new to android developing
This process have been tested personally on my device moto g 2104
NOTE :This Will wipe all your data so pls take all yours useful databackup
INSTRUCTION
1) Download and install the Basic Moto Drives in this http://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/97326/p/30,6720,9050
2)Download the required Official Firmware(KitKat,Lollipop) form here https://mega.nz/#F!Q9YHCQzY!dgyvAJ8eNA3t7az4vizwOQ which i have taken Through Original Motorola Firmware Collection[Thread] thanks to @gregor160300
all the Firmware are Official images and are uploaded Recently
3)Download the OneClick Tool zip according to yours need a(locked) and b(Unlocked) form Here
a)restore with locked Boatloader Here https://drive.google.com/open?id=0By-2WiK-9wJqfmlMT3BoMmxqakU0M0lJdDk0OGF3UmVJZWN5eW90a0pIdUtSU3BRb0pxbms
b)restore with unlocked Boatloader Here https://drive.google.com/open?id=0By-2WiK-9wJqfktRWG1wbFJ6S2JnLU5FTFBNUWp2ckRZWnZmMUVfV1hiX3JjUGw0am1LR2s
4)Now Extract the Firmware zip to a Particular Folder at your given location on your PC/Laptop
5)After That Extract the OneClick zip to a Same Folder (Where U have the Extracted the Firmware Files)
6)Boot your Moto G 2014 into FastBoot Mode and plug your Device into your computer (pls Make sure u have all the proper device drivers are installed)
6)Finally Go To the Extracted Folder and u will see OneClick .bat file just click on OneClick
U r done Njoy till its gets Completed
All the Firmware are Official images Your warranty may not Void also u may get Yours Warrenty Back
hope u Enjoy this
PLS DON'T MIRROR THE LINKS
sry for my bad english i will improve
special Thanks to both @ archies20 @gregor160300,Shawn5162 for their thread:laugh::laugh:
Please Do press Thanks button if u really liked My Work i really need it :good:

It's For Indian Version ?

yes u can check this according to the indian baseband

Tried it today and it worked flawlessly, thanks!

heeey thanks 4 the reveiw hope i will come with other thread

so hey guys. i have a moto g 2014 xt1068 dual sim variant. for some reason after unlocking bootloader, flashing TWRP, and flashing an other ROM(blisspop 5.1.1) for some reason my first sim card slot was like not working at all and my second sim doesnt have mobile data only calls. So I flashed stock firmware 5.0.2(RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml) but the problem still exists. I dont know what to do :'( any help?

Mike20017 said:
so hey guys. i have a moto g 2014 xt1068 dual sim variant. for some reason after unlocking bootloader, flashing TWRP, and flashing an other ROM(blisspop 5.1.1) for some reason my first sim card slot was like not working at all and my second sim doesnt have mobile data only calls. So I flashed stock firmware 5.0.2(RETAILDSDSALL_XT1068_5.0.2_LXB22.46-28_cid7_CFC.xml) but the problem still exists. I dont know what to do :'( any help?
Click to expand...
Click to collapse
Change both sim slots?

do a clean Install make a try if still not working change the baseband version and check out again if still not working den hope a hardware fix will resolve it

Hello,
First things first: thanks for this great tool! I needed to restore the original firmware and didn't know how to do that. With this tool it's quite simple.
I had only two small problems:
- the first time I've run tour .bat file I seen several commands being executed, all of the m with an OK in the end, but after all process the phone didn't boot, no recovery also. I ran the .bat file a second time and it's OK now.
- another strange thing happened: the boot logo screen reverted to the "unlocked bootloader" screen.
A question: can I flash only the bootlogo screen via adb?

Moto bootloop struck help help
Hello can any senior member plz help me out.
I have unlocked and rooted moto g2 2014 mobile it was working fine.
But I done a stupid thing by editing system file and overwriting it.
Then my phone stuck in boot loader
I can access recovery TWRP i tried to wipe Delvic and cache and factory resetting but it did'nt worked.
Therefore buy following the link i tried to flash with orginal frimware
www droidviewsmoto g 2014 to stock and lock the bootloader
it was not successful again it strucked in boot loop with Android dead symbol in recovery
------>> Then tried to install TWRP recovery it was successful, but unable to install super user.
There fore I tried to repeat the process buy using both sdk windows platfom tools and vfastboot
buy typing command in cmd as mfastboot.exe oem lock begin
and noticed error saying
hab check failed for boot
failed to verity hab image boot
failed to validate boot image
Plz sir can any one help me out plz

yes
yes u can using the img file
follow this instructions to remove the warning instruction
http://www.bhudroid.com/2015/08/remove-unlocked-bootloader-warning-on.html

Kindly First Update yours boot loader Version
Kindly First Update yours boot loader Version
this can be the an issue
and after that cleanly flash the latest TWRP recovery
and Finally any Latest Build Custom Rom
this may Works

Marcelo_RJ said:
Hello,
First things first: thanks for this great tool! I needed to restore the original firmware and didn't know how to do that. With this tool it's quite simple.
I had only two small problems:
- the first time I've run tour .bat file I seen several commands being executed, all of the m with an OK in the end, but after all process the phone didn't boot, no recovery also. I ran the .bat file a second time and it's OK now.
- another strange thing happened: the boot logo screen reverted to the "unlocked bootloader" screen.
A question: can I flash only the bootlogo screen via adb?
Click to expand...
Click to collapse
yes u can using the img file
follow this instructions to remove the warning instruction
http://www.bhudroid.com/2015/08/remove-unlocked-bootloader-warning-on.html

Kindly First Update yours boot loader Version
sudheerkk87 said:
Hello can any senior member plz help me out.
I have unlocked and rooted moto g2 2014 mobile it was working fine.
But I done a stupid thing by editing system file and overwriting it.
Then my phone stuck in boot loader
I can access recovery TWRP i tried to wipe Delvic and cache and factory resetting but it did'nt worked.
Therefore buy following the link i tried to flash with orginal frimware
www droidviewsmoto g 2014 to stock and lock the bootloader
it was not successful again it strucked in boot loop with Android dead symbol in recovery
------>> Then tried to install TWRP recovery it was successful, but unable to install super user.
There fore I tried to repeat the process buy using both sdk windows platfom tools and vfastboot
buy typing command in cmd as mfastboot.exe oem lock begin
and noticed error saying
hab check failed for boot
failed to verity hab image boot
failed to validate boot image
Plz sir can any one help me out plz
Click to expand...
Click to collapse
Kindly First Update yours boot loader Version
this can be the an issue
and after that cleanly flash the latest TWRP recovery
and Finally any Latest Build Custom Rom
this may Works

thnks .......
woow its working great . very simplest way thank u so much
bhu999 said:
heeey thanks 4 the reveiw hope i will come with other thread
Click to expand...
Click to collapse

Can I get OTA update after this ?
I just want to know can I get OTA update after this if Motorola roll out any update in the near future.

mudit56 said:
I just want to know can I get OTA update after this if Motorola roll out any update in the near future.
Click to expand...
Click to collapse
Yes

woow...
wow its working great for me... very simply to use ... am not face any bugs.......... thanks for your work:good:

@bhu999 Thanks it worked awesome.
one question can i get official OTA update from Motorola if i root my device now ??? Because for rooting custom recovery is required and it is impossible to get OTA while on custom recovery. Right ??

yes u can but with stock recovery
just flash the stock recovery to get the available update also
In One Click method u can get the official available update after completing the whole procedure

[Q] [HELP] stuck in Bootlogo in recovery mode and system

hey guys.i need your help.my sgy stuck in bootlogo after i reboot my recovery and then i tried to reboot system and its also stuck in bootlogo.what is the best thing to do or the best way without flashing thru odin.heres what happen...
i flash my sgy to stock rom with this version [S5360_DXMJ1_OLBMJ1_DXMI1] and then i flash the hyperion 9 GM final build and it works fine.after that, i tried to flash the Merruk tech kernel 2.0 thru kernel update by Fakbly followed by ext4 flasher and system 1.0.8.it works fine.i test it thru root checker and i found out that theres no busybox installed.so i plan to flash back my old kernel,the one that was backup by kernel update by Fakbly.and when i reboot my recovery...that where the problem started.sorry for the bad english.hope you all understand what im trying to say.thanks alot and hope you can help me.

Bricked A6000 Please help

hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me

http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247

You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!

try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.

thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well

miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.

if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.