How would I go about changing my boot animation? I have tried with rom tool box but it doesnt work and I cant seem to find the file in a root explorer.
flash imnuts custom kernel in dev section. Then romtoolbox should work
Sent from my SPH-M580BST using Tapatalk 2
This still didn't work for me. I flashed I400_CWM. Rebooted. Opened ROM Toolbox and selected a new Boot Animation. Rebooted. Same old boring stock boot animation came up.
Are the bootzips in the right folder?
Clear cache/dalvik...
Sent from my SPH-M580BST using Tapatalk 2
Also did not work!
This also did not work for me I still have the stock boot animation and i have that kernal installed.
Jaggar345 said:
This also did not work for me I still have the stock boot animation and i have that kernal installed.
Click to expand...
Click to collapse
What build and rom are u running?
Sent from my SPH-M580BST using Tapatalk 2
ciscogee said:
What build and rom are u running?
Sent from my SPH-M580BST using Tapatalk 2
Click to expand...
Click to collapse
Build = SCH-I400.EC09
ROM = The one and only Ciscogee's EC09 Deodexed
I cleared cache, rebooted, used ROM Toolbox to install Animation, rebooted, and still stock animation. Do I need to manually move the files to another folder?
As I remember I used one of these kernels.
http://forum.xda-developers.com/showthread.php?p=17865190
[EC07][KERNEL] Hacked Stock Kernel
And make sure in op to see the folders
Sent from my SPH-M580BST using Tapatalk 2
ciscogee said:
As I remember I used one of these kernels.
http://forum.xda-developers.com/showthread.php?p=17865190
[EC07][KERNEL] Hacked Stock Kernel
And make sure in op to see the folders
Sent from my SPH-M580BST using Tapatalk 2
Click to expand...
Click to collapse
Everything I had heard was that the animation could not be changed now on EC09. I tried copying the new bootanimation.zip to \data\local, replacing the exiting one, but that didn't work. Still looking.
---------- Post added at 04:06 PM ---------- Previous post was at 03:43 PM ----------
gusterfan2180 said:
Everything I had heard was that the animation could not be changed now on EC09. I tried copying the new bootanimation.zip to \data\local, replacing the exiting one, but that didn't work. Still looking.
Click to expand...
Click to collapse
Ok, think I have it figured out. The bootanimation.zip in /system/media was removed with EC09. It was replaced by two files, bootsamsung.qmg and bootsamsungloop.qmg. These files are what need to be replaced.
I found a page with a few replacements Here
There is a manual fix in continuum forum somewhere. That's how I did it before imnuts hack. As for ec09 my bootani is cm9 so I do believe I did the manual work around
Sent from my SPH-M580BST using Tapatalk 2
Ps. Just checked my i400. Bootanimation.zip as well as bootsamsungloop.qmg and bootsamsung.qmg
ciscogee said:
There is a manual fix in continuum forum somewhere. That's how I did it before imnuts hack. As for ec09 my bootani is cm9 so I do believe I did the manual work around
Sent from my SPH-M580BST using Tapatalk 2
Ps. Just checked my i400. Bootanimation.zip as well as bootsamsungloop.qmg and bootsamsung.qmg
Click to expand...
Click to collapse
Jagger,
The ec09 kernel you are on hasn't been hacked for boot animations. Imnuts never got around to it. The EC07 kernel ciscogee posted has, but you'd be back to the 'appy sdcard:update.zip" method of getting into cwm. So, it's going to be a matter of which one you want more. The fix you referenced should work for you, though.
I would, however, extract the bootani.qmg and samsungbootloop.qmg and place them manually, as opposed to flashing the zip, though. Or, at the very least, make a nandroid before flashing (which you should be doing, anyway).
So
Txwolf1980 said:
Jagger,
The ec09 kernel you are on hasn't been hacked for boot animations. Imnuts never got around to it. The EC07 kernel ciscogee posted has, but you'd be back to the 'appy sdcard:update.zip" method of getting into cwm. So, it's going to be a matter of which one you want more. The fix you referenced should work for you, though.
I would, however, extract the bootani.qmg and samsungbootloop.qmg and place them manually, as opposed to flashing the zip, though. Or, at the very least, make a nandroid before flashing (which you should be doing, anyway).
Click to expand...
Click to collapse
So this means if I want the cyborg boot animation I have to replace the two files with it? And yes I have always been making a nandroid backup when flashing new files.
Jaggar345 said:
So this means if I want the cyborg boot animation I have to replace the two files with it? And yes I have always been making a nandroid backup when flashing new files.
Click to expand...
Click to collapse
That is what I would try
Swyped from the land of unicorn porn
Related
Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
EDIT: I guess Ziggy did a version as well a few months ago. Here is a link to his: Ziggy's AnyKernel MOD
Download Mine --> Tbolt_AnyKernel.zip
a true asset to this community.
thanks for all your hard work!
cant wait for skyraider zeus v2
Sense ROMs only?
jc
ihtfp69 said:
Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
Download --> Tbolt_AnyKernel.zip
Click to expand...
Click to collapse
Surprised to see you here? Glad to see your support for the community.
mrchambo said:
Sense ROMs only?
jc
Click to expand...
Click to collapse
Yes, it's the stock kernel from the new leak, which is Sense.
Okay, thank you. That's what I thought...
jc
Applying this gave me bootloops in Gingervitis 1.2.1 GB. Won't go past the splash screen
mrchambo said:
Sense ROMs only?
jc
Click to expand...
Click to collapse
The scripts should work on AOSP and Sense ROMs. The kernel included is Sense only.
JaydenR said:
Applying this gave me bootloops in Gingervitis 1.2.1 GB. Won't go past the splash screen
Click to expand...
Click to collapse
Hmmm ... it shouldn't matter, but I will wake a look and see if I can duplicate it. Make sure the file you downloaded is around 3.4 MB. If not, grab it again.
First download was 2.89 second was 3.4 I believe. Both had the exact same result. Boot loops
Ziggy already did this for the tbolt. Ive been using anykernel for over a month now. It what iuse when i extract the kernel from synergy.
fixxxer2008 said:
Ziggy already did this for the tbolt. Ive been using anykernel for over a month now. It what iuse when i extract the kernel from synergy.
Click to expand...
Click to collapse
Is he sharing? I seem to be misinformed then. Why is everyone else still using boot.img files then?
ihtfp69 said:
Is he sharing? I seem to be misinformed then. Why is everyone else still using boot.img files then?
Click to expand...
Click to collapse
yeah it's under the thunderbolt section at ppcgeeks. been there for awhile now.
http://forum.ppcgeeks.com/htc-thunderbolt-development/143287-anykernel-thunderbolt.html
cool beans. I'll just link to his then.
What is the purpose of this kernel updater?
I'm not sure I understood how Ziggy explained it.
johnnysyeah said:
What is the purpose of this kernel updater?
I'm not sure I understood how Ziggy explained it.
Click to expand...
Click to collapse
lol! Gotta love Ziggy but, he definitely thinks on a higher plane than most! I have trouble following him lots of times as well.
ihtfp69 said:
Ihtfp69 tip toes in and closes the door
I realized after releasing a ROM that no one was using Koush's AnyKernel method for flashing kernels. This poses a problem for ROMs with custom ramdisks. Someone mentioned the AnyKernel method did not work on this phone. So I did some investigating. With a few changes to the script, I have it working perfectly.
Credits here, of course, go to Koush. I just modified his script. The kernel zip attached here contains the kernel from the latest leak. Because this uses the AnyKernel method, you can flash this on ANY GB Sense ROM and it will work and not break WiFi.
EDIT: I guess Ziggy did a version as well a few months ago. Here is a link to his: Ziggy's AnyKernel MOD
Download Mine --> Tbolt_AnyKernel.zip
Click to expand...
Click to collapse
I just tried this, and it broke Wifi on my Tbolt. Any idea what the reason could be? I extracted the Zimage from my target ROM, replaced it in the .Zip, and flashed it. Anything else I should be doing?
onyx_64 said:
I just tried this, and it broke Wifi on my Tbolt. Any idea what the reason could be? I extracted the Zimage from my target ROM, replaced it in the .Zip, and flashed it. Anything else I should be doing?
Click to expand...
Click to collapse
You need to pull the bcm from /system/lib/modules also.
Sent from my SHIFTAO5P using XDA App
DroidTh3ory said:
You need to pull the bcm from /system/lib/modules also.
Sent from my SHIFTAO5P using XDA App
Click to expand...
Click to collapse
oh, yeah, forgot to mention that I copied the 2 files (bcm4329* and sequans*) from the target ROM into /system/lib/modules After I had flashed. Should I have copied it to the .zip first and then flashed it? does it sit anywhere other than /system/lib/modules?
The reason i didnt do it is because I assumed the existing files should work.
onyx_64 said:
oh, yeah, forgot to mention that I copied the 2 files (bcm4329* and sequans*) from the target ROM into /system/lib/modules After I had flashed. Should I have copied it to the .zip first and then flashed it? does it sit anywhere other than /system/lib/modules?
The reason i didnt do it is because I assumed the existing files should work.
Click to expand...
Click to collapse
The bcm spits out at the end of compiling the kernel and it is specific to the kernel. Pull the zimage and the modules from the ROM, put them in the correct folders in the zip ... Wipe Cache and Dalvik for kicks and flash. Should be fine.
Sent from my SHIFTAO5P using XDA App
DroidTh3ory said:
The bcm spits out at the end of compiling the kernel and it is specific to the kernel. Pull the zimage and the modules from the ROM, put them in the correct folders in the zip ... Wipe Cache and Dalvik for kicks and flash. Should be fine.
Sent from my SHIFTAO5P using XDA App
Click to expand...
Click to collapse
Wow man.. you are quick. Let me try that way. Thanks so much!
UPDATE:
That worked like a charm!.. Flashed with the lib/modules after wiping cache n dalvik. Thanks again!
*******The new, new KJ2 is out, get it here http://forum.xda-developers.com/showthread.php?t=1297223
I just put together a quick ROM with the new KJ1, its pretty much stock with a little color.
Nothing special, and this will be the only one I do.
I flashed it and it installs and runs fine, no problems so far.
Deodexed, zipaligned, rooted
****Here is the link for root, just flash it with clockwork mod and you are good to go, forgot to add busybox and su to system\xbin.****
http://dl.dropbox.com/u/44737360/Root.zip
And here is the link for those that want the Galaxy S sound back.
http://dl.dropbox.com/u/44737360/Power_on.zip
It has
The new Boog KJ1 kernel 1, no init.d. Thanks Boog!!! You're a machine.
extended Power menu
circle battery
crt animation
some color
translucent status bar pulldown
tethering
thats it...
Make sure you are on gingerbread boot loaders and have Boogs KJ1 Kernel tar installed http://forum.xda-developers.com/showthread.php?t=1294849
Copy the zip file to your sdcard and flash with clockwork mod.
As always, I am not responsible if it messes up your phone.
http://www.mediafire.com/download.php?ns84kz8a8j6wwpa
I know it's been deodexed, but has it been zipaligned?
Kyuta Syuko said:
I know it's been deodexed, but has it been zipaligned?
Click to expand...
Click to collapse
Yeah, guess I should put all of that, huh?
crt60 said:
Yeah, guess I should put all of that, huh?
Click to expand...
Click to collapse
Maybe people have started assuming it already, but wouldn't hurt.
ok excellent
please get dropbox. there is a link in my sig.mega upload sucks.
could you please upload file on http://multiupload.com/
megaupload don't work now
mirotvorets said:
could you please upload file on http://multiupload.com/
megaupload don't work now
Click to expand...
Click to collapse
I was going to set up a dropbox account soon.
I'm getting errors saying that my phone isn't rooted.
afrojoc said:
I'm getting errors saying that my phone isn't rooted.
Click to expand...
Click to collapse
Hmmm, I added superuser.apk, maybe I will use a newer version, let me try it and I will post a fix in the first post soon.
For some reason the su binary isn't installing, I have to go get ready for work so I won't be able to mess with it until tonight.
I will have to remove the rooted part in the first post.
EDIT:Fixed, forgot to add busybox and su to system\xbin. I thought I did that, but obviously I didn't, all good now...
I also got the errors about my phone being rooted. When i went to update the superuser binary with the superuser app, it gave me a failure... I think the issue is with the binary. Flashed the fuguroot kernel, then re-flashed the boog kernel and all was well. Love the ROM, by the way. Especially the battery icon, and changing colors
nbell13 said:
I also got the errors about my phone being rooted. When i went to update the superuser binary with the superuser app, it gave me a failure... I think the issue is with the binary. Flashed the fuguroot kernel, then re-flashed the boog kernel and all was well. Love the ROM, by the way. Especially the battery icon, and changing colors
Click to expand...
Click to collapse
Thanks, I don't think busybox is installing either, thats what I get for making changes and not testing things and just taking them for granted it will work.
I'll fix it tonight when I get home...
thats not a big deal! once you get that corrected then i'd be more then happy to use this rom!
Is there a way to get rid of the thunderstorm/rain sound that plays on boot up? I prefer a silent boot up screen (without taking my system volume all the way down)
Edit: Nevermind, found it.
nbell13 said:
Is there a way to get rid of the thunderstorm/rain sound that plays on boot up? I prefer a silent boot up screen (without taking my system volume all the way down)
Edit: Nevermind, found it.
Click to expand...
Click to collapse
Yeah, I don't know how I got that in there, its a part of Boogs kernel with the new fire boot animation, pretty cool, but not really stock.
crt60 said:
Yeah, I don't know how I got that in there, its a part of Boogs kernel with the new fire boot animation, pretty cool, but not really stock.
Click to expand...
Click to collapse
Weird, mine never showed that fire boot animation... And of course, KJ2 just leaked out
Can someone reupload this ROM? I just wanna have to H+ symbol on my phone, and only this leak has it xD
pwneman said:
Can someone reupload this ROM? I just wanna have to H+ symbol on my phone, and only this leak has it xD
Click to expand...
Click to collapse
I'll fix the link when i get home this evening.
Also Fusion kk4 has the h+ symbol too.
Sent from my SAMSUNG-SGH-I897 using xda premium
crt60 said:
I'll fix the link when i get home this evening.
Also Fusion kk4 has the h+ symbol too.
Sent from my SAMSUNG-SGH-I897 using xda premium
Click to expand...
Click to collapse
Thanks. I'm not really a fan of the fusion theme. Just like keeping as close to stock gingerbread as possible. Is there any significant difference between KK4 and KJ1? My KK4 Odexed Rom was kinda slow on gaming..i just need an all rounded rom..
pwneman said:
Thanks. I'm not really a fan of the fusion theme. Just like keeping as close to stock gingerbread as possible. Is there any significant difference between KK4 and KJ1? My KK4 Odexed Rom was kinda slow on gaming..i just need an all rounded rom..
Click to expand...
Click to collapse
I believe Fusion has a stock revert theme, if you can't find it in the thread I can upload it for you but in either case I can't do anything til later this evening. I'll hook you up one way or another. So no ICS?
Sent from my SAMSUNG-SGH-I897 using xda premium
The idea behind this is that you download the rom and add tweaks to it and if its better than what I already have, that will replace the what's already up but remember it has to be based off of the orig. Once you have installed your tweaks/theme post a download link and sceenshots. I would like to have two different roms, one is ics based the other one is sense based.
[Edit] when you edit make sure you do not include miktweaks as i dont have permission to use that,if you do have miktweaks in there your rom will not be considered
Rom's current status:won't boot up past plash screen
Download:http://d-h.st/1Rn
Logcat:http://d-h.st/ibm
Nice to see this posted here. Alright so now with basic troubleshooting. I'm not very great at this as I'm a themer but maybe a dev will step in and help out too.
First off I need to ask how you "Created" this ROM. What apks did you copy from where. what apks did you modify, how you modified them because we don't have much to go on. And also If you could upload your ROM to media fire or dev host or something and post PUBLICLY because the PM thing will end in failure.
Let's try to get this ball rolling :beer:
Sent from my PG86100 using Tapatalk 2
I would imagine he grabbed widgets and whatnot, in that case it calls for Rosie, then if that's the case Rosie is going to call for resources. A lot of posibilities here
Sent from my myTouch_4G_Slide using Tapatalk 2
strapped365 said:
I would imagine he grabbed widgets and whatnot, in that case it calls for Rosie, then if that's the case Rosie is going to call for resources. A lot of posibilities here
Sent from my myTouch_4G_Slide using Tapatalk 2
Click to expand...
Click to collapse
From trial in error in the past i once deleted my Rosie. my phone still booted up it was just that i wasn't able to access my screens. But i could still see my apps in the app drawer and i could still get to my settings
notsointeresting said:
Nice to see this posted here. Alright so now with basic troubleshooting. I'm not very great at this as I'm a themer but maybe a dev will step in and help out too.
First off I need to ask how you "Created" this ROM. What apks did you copy from where. what apks did you modify, how you modified them because we don't have much to go on. And also If you could upload your ROM to media fire or dev host or something and post PUBLICLY because the PM thing will end in failure.
Let's try to get this ball rolling :beer:
Sent from my PG86100 using Tapatalk 2
Click to expand...
Click to collapse
Apks: Data\app to Data\app and system\app to system\app
The only apk i modified was the rosie.apk i changed the applistbackground.png and i copie and pasted everything else from supreme to the Everybody Rom
wow! nice to see this .Thanks for your contribution .
Lol thank strapped and notsointeresting, I probly would have never reposted this without nowing id get help from them
Sent from my PG06100 using Tapatalk 2
So as I said in my previous post you grabbed my Rosie.apk and your phone ROM does not have the resources capable of booting Sense 3.0
Also data/app will not work unless you have the data/app enabled and built into the updater-script
Sent from my myTouch_4G_Slide using Tapatalk 2
strapped365 said:
So as I said in my previous post you grabbed my Rosie.apk and your phone ROM does not have the resources capable of booting Sense 3.0
Also data/app will not work unless you have the data/app enabled and built into the updater-script
Sent from my myTouch_4G_Slide using Tapatalk 2
Click to expand...
Click to collapse
where to find the updater script
Hubertkilgore said:
where to find the updater script
Click to expand...
Click to collapse
In META-INF/com/google/android.
What's the plan on resources though
Sent from my myTouch_4G_Slide using Tapatalk 2
im gonna take a stab in the dark here and say its never gonna work without the proper resources because alot of the tweaks are done in the smali in the jar files. without the proper corresponding smali edits to go with the apks its essentially pointless but i wish ya the best of luck.
-somebody- said:
im gonna take a stab in the dark here and say its never gonna work without the proper resources because alot of the tweaks are done in the smali in the jar files. without the proper corresponding smali edits to go with the apks its essentially pointless but i wish ya the best of luck.
Click to expand...
Click to collapse
But yes like your saying the phone WILL NOT boot without the needed resources
Sent from my myTouch_4G_Slide using Tapatalk 2
My computer just crashed so I should be able to fix it within today, just a matter of patience. So please excuse me if I don't reply right away
Sent from my PG06100 using Tapatalk 2
As of now my computer is for the most part able to be fixed. I'm waiting for this "file" to finish downloading so I can reinstall my operating stystem.
Sent from my PG06100 using Tapatalk 2
Hubertkilgore said:
As of now my computer is for the most part able to be fixed. I'm waiting for this torrent to finish downloading so I can reinstall my operating stystem.
Sent from my PG06100 using Tapatalk 2
Click to expand...
Click to collapse
I wouldn't mention any torrents on here, as that counts as warez (90% of the time). This Site doesn't take warez lightly. Nothing against you just be careful :beer:
Sent from my A100 using Tapatalk 2
i'm now back with my computer up and running with adb install.So what do i need to do
Hubertkilgore said:
i'm now back with my computer up and running with adb install.So what do i need to do
Click to expand...
Click to collapse
If you have the sdk with adb already start logcats on the phone while its bootlooping/stuck at splash and start replacing what's erroring out
Sent from my myTouch_4G_Slide using Tapatalk 2
strapped365 said:
If you have the sdk with adb already start logcats on the phone while its bootlooping/stuck at splash and start replacing what's erroring out
Sent from my myTouch_4G_Slide using Tapatalk 2
Click to expand...
Click to collapse
what should i replace it with
Hubertkilgore said:
what should i replace it with
Click to expand...
Click to collapse
Takke what's erroring from the base ROM and insert into your ROM
Sent from my myTouch_4G_Slide using Tapatalk 2
Wouldnt that give me a broken rom
p.s im running logcat and it looks like a forign languge to me
Captivate currently had TWICS. Its base code from cm9 with TW launcher and Samsung gs3 add on with devil kernel. Running this o my cappy. Super fast and stable. Just an outstanding rom.
Can someone port this to vibrant please!
What are you looking at shortbus......
*NOT SURE/CONFIRMED
But since it is in the line of the original galaxy s, I think you can just flash it, and then change modem/kernel/key layout, which is done by a script (forgot what its called in our development section)
ok, i found it
http://forum.xda-developers.com/showthread.php?t=1623840
Using that, you SHOULD be able to flash any Galaxy S ROM (except the 4G)
If it doesn't work, nothing will go wrong, most likely you will
1) boot loop
2) key layout will be mixed up(easy fix)
3) no connection (change modem/kernel)
*you said this was TWICS, make sure it is ICS and not just themed to look like TWICS.
Link to rom please?
http://forum.xda-developers.com/showthread.php?t=1625619
What are you looking at shortbus......
hey, instead of using it from the captivate, use it from the i9000
http://forum.xda-developers.com/showthread.php?t=1608624
same thing, captivate guy ported from i9000, just you'll probably get updates etc faster.
P.S. tell us how it goes.
xriderx66 said:
hey, instead of using it from the captivate, use it from the i9000
http://forum.xda-developers.com/showthread.php?t=1608624
same thing, captivate guy ported from i9000, just you'll probably get updates etc faster.
P.S. tell us how it goes.
Click to expand...
Click to collapse
OK so I tried it from the captivate before I saw this post. Installed rom and before it gave install complete it auto rebooted. The rom was on my phone but up was down left was right ie screen was in landscape then when I turn it sideways it would go to normal view. I rebooted to recovery and ran patch then reboot and wouldn't get past vibrant screen. I will try again with i9000 rom and let you know the results.
Sent from my SGH-I897 using XDA
Tried it with i9000 rom but it aborted error status 7. I think my zip was bad. Going to try again.?
Sent from my SGH-T959 using xda premium
Edit: just read FAQ need to change some things in rom file. Will update after I try this
samsgun357 said:
Tried it with i9000 rom but it aborted error status 7. I think my zip was bad. Going to try again.?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Try to flash the Subzero kernel from here: (use build 80 not 128) http://rootzwiki.com/topic/22833-kernelics15-june-subzero-v14-build-128-brain-dead-and-loving-it/
If you already tried it from Subzero kernel; try the Glitch kernel, its on these dev sections.
Flash either of those to the ROM you currently have, and then try to flash it.
EDIT----------------
"if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad (windows)"
It's in the patch's thread.
Do that.
I followed the thread exactly used jota changed everything and tried again. It just aborts install. I haven't given up. Gonna try again tomorrow. It beat me tonight but not for good! Thanks for everything x.
Sent from my SGH-T959 using xda premium
firstly I want to tell you that because of not having a vibrant to test the patch is in beta
what you can do is open updater script with jota text editor and remove all those getprop lines from the script and as a security step what you can do is press menu button then tap on file and tap on line break then select (lf for android/Linux) save the file go to meta-inf folder and remove all those cert files
zip the package again and flash no need to sign it again for further help you can ask me also in the patch thread
dhlalit11 said:
firstly I want to tell you that because of not having a vibrant to test the patch is in beta
what you can do is open updater script with jota text editor and remove all those getprop lines from the script and as a security step what you can do is press menu button then tap on file and tap on line break then select (lf for android/Linux) save the file go to meta-inf folder and remove all those cert files
zip the package again and flash no need to sign it again for further help you can ask me also in the patch thread
Click to expand...
Click to collapse
Thanks for input. I first tried it using a captivate port and it would install then I would run patch and it wouldn't boot past vibrant screen. Then I got the original galaxy s rom that the cappy rom was ported from. It gave the error so I proceeded to change the file as per op instructions. It would abort install with but no error status. I did it twice to make sure. If I changed all the get prop from i9000 to t959 would it work?
Sent from my SGH-T959 using xda premium
you should not replace them instead just remove them
after flashing if it gives error then reboot device and with any root explorer app go to /cache/recovery and upload both the files I will see what the error is and then I can troubleshoot better
So guys I'm the twics porter to the cappy twics will soon be called remics I've been a part of a team that took over twics and I will soon be releasing to captivate
Sent From My ICS Cappy Using Tapatalk 2
patrick8996 said:
So guys I'm the twics porter to the cappy twics will soon be called remics I've been a part of a team that took over twics and I will soon be releasing to captivate
Sent From My ICS Cappy Using Tapatalk 2
Click to expand...
Click to collapse
Do you think it'd be possible for you to release a version for Vibrant as well? Since not much will have to be changed from Captivate.
Just modem/kernel, and possibly build.prop
dhlalit11 said:
you should not replace them instead just remove them
after flashing if it gives error then reboot device and with any root explorer app go to /cache/recovery and upload both the files I will see what the error is and then I can troubleshoot better
Click to expand...
Click to collapse
I did remove and it just aborts with no explanation.
Sent from my SGH-T959 using xda premium
xriderx66 said:
Do you think it'd be possible for you to release a version for Vibrant as well? Since not much will have to be changed from Captivate.
Just modem/kernel, and possibly build.prop
Click to expand...
Click to collapse
Yes please! I love it on my cappy and want it on my vibrant also!
Sent from my SGH-T959 using xda premium
and what about uploading the error log from /cache/recovery
I took the twics add on from mr.mad for gs1 running cm9/slim and flashed on my vibrant running gummy 1.2.6 and it got stuck on boot . I reflashed gummy without wiping and now have all the apps from add on except for tw launcher. I guess that's a happy medium until we can get a port.
Sent from my SGH-T959 using xda premium
dhlalit11 said:
and what about uploading the error log from /cache/recovery
Click to expand...
Click to collapse
How do I extract it from root browser?
Posse magnet......
samsgun357 said:
How do I extract it from root browser?
Posse magnet......
Click to expand...
Click to collapse
Just go to that file, copy it and paste it into your SD or something, and then upload it from there.
Because I have flashed a new rom and kernel the recovery log doesn't have the abort/error info...
Posse magnet......
I'm having issues with my browser giving me the error "ERR_CONNECTION_REFUSED" on some sites. Tumblr in particular. I have tried to change DNS on my phone with no luck and tried to use a VPN with same results. I noticed this with the Tumblr app when I tried to login that it would give me an error saying I'm not connected to a network. Other sites seem fine like Google, Facebook, etc.. but with Tumblr, and more (dare I say) adult sites are giving me this error. Not sure how i would go about fixing this and everywhere I have looked so far has giving me no solution to this. Is this a result from rooting, or am I just oblivious to the solution. Anything the would help would be appreciated.
Are you using the custom rom or trying to use your stock one? The stock one is broken(for now)
If you are using the custom rom try formatting your data and see if that fixes it. Dirtysanta methods need to be done from a clean install only.
me2151 said:
Are you using the custom rom or trying to use your stock one? The stock one is broken(for now)
If you are using the custom rom try formatting your data and see if that fixes it. Dirtysanta methods need to be done from a clean install only.
Click to expand...
Click to collapse
I followed the tut. from the dirty santa thread and used the LS997-deODEXd-signed as it was stated to be used on my sprint lg v20. Im still new to android device rooting and all so im not sure if it was a custom rom or stock one i used. I formated the data on my phone when doing this process byt ill do it again when im able to get to my pc.
Chips98 said:
I followed the tut. from the dirty santa thread and used the LS997-deODEXd-signed as it was stated to be used on my sprint lg v20. Im still new to android device rooting and all so im not sure if it was a custom rom or stock one i used. I formated the data on my phone when doing this process byt ill do it again when im able to get to my pc.
Click to expand...
Click to collapse
You are on the custom rom like you should be. Did you flash the updated kernel in my second post?(Konverged kernel)
me2151 said:
You are on the custom rom like you should be. Did you flash the updated kernel in my second post?(Konverged kernel)
Click to expand...
Click to collapse
Oh my theres a second post? I got to the part saying it was successfully rooted and stopped. Ill definatly give it a look see once i get home and post results. Thanks again for the info!
me2151 said:
You are on the custom rom like you should be. Did you flash the updated kernel in my second post?(Konverged kernel)
Click to expand...
Click to collapse
Mkay so i read the second post flashed the update and i still get an err_connection_refused error on my browser :s going for a format now
Chips98 said:
Mkay so i read the second post flashed the update and i still get an err_connection_refused error on my browser :s going for a format now
Click to expand...
Click to collapse
Hey. Just wait a couple hours. I just finished building a flashable stock rom that is almost fully working(only has static at boot) I need to upload it.
Awesome to hear. Did try a fresh format and still have the error connection refused :s so for now ill wait till you get your files uploaded and see if that would help thanks so far tho
Delete the host file and then
Go and rename the hostfile from .bak ...It's In system/etc
Sent from my LG-LS997 using Tapatalk
nexus6r3plicant01 said:
Delete the host file and then
Go and rename the hostfile from .bak ...It's In system/etc
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
Just delete it, it will create a new one... It some sort of ad blocking that is creating your problem.
Sent from my LG-H918 using Tapatalk
me2151 said:
Hey. Just wait a couple hours. I just finished building a flashable stock rom that is almost fully working(only has static at boot) I need to upload it.
Click to expand...
Click to collapse
nexus6r3plicant01 said:
Delete the host file and then
Go and rename the hostfile from .bak ...It's In system/etc
Sent from my LG-LS997 using Tapatalk
Click to expand...
Click to collapse
ZDeuce2 said:
Just delete it, it will create a new one... It some sort of ad blocking that is creating your problem.
Sent from my LG-H918 using Tapatalk
Click to expand...
Click to collapse
Hot damn! This actually worked! I deleted both files from system/etc and I can now get to my blog! Thank you both!
This worked for ke tha k you!