Captivate currently had TWICS. Its base code from cm9 with TW launcher and Samsung gs3 add on with devil kernel. Running this o my cappy. Super fast and stable. Just an outstanding rom.
Can someone port this to vibrant please!
What are you looking at shortbus......
*NOT SURE/CONFIRMED
But since it is in the line of the original galaxy s, I think you can just flash it, and then change modem/kernel/key layout, which is done by a script (forgot what its called in our development section)
ok, i found it
http://forum.xda-developers.com/showthread.php?t=1623840
Using that, you SHOULD be able to flash any Galaxy S ROM (except the 4G)
If it doesn't work, nothing will go wrong, most likely you will
1) boot loop
2) key layout will be mixed up(easy fix)
3) no connection (change modem/kernel)
*you said this was TWICS, make sure it is ICS and not just themed to look like TWICS.
Link to rom please?
http://forum.xda-developers.com/showthread.php?t=1625619
What are you looking at shortbus......
hey, instead of using it from the captivate, use it from the i9000
http://forum.xda-developers.com/showthread.php?t=1608624
same thing, captivate guy ported from i9000, just you'll probably get updates etc faster.
P.S. tell us how it goes.
xriderx66 said:
hey, instead of using it from the captivate, use it from the i9000
http://forum.xda-developers.com/showthread.php?t=1608624
same thing, captivate guy ported from i9000, just you'll probably get updates etc faster.
P.S. tell us how it goes.
Click to expand...
Click to collapse
OK so I tried it from the captivate before I saw this post. Installed rom and before it gave install complete it auto rebooted. The rom was on my phone but up was down left was right ie screen was in landscape then when I turn it sideways it would go to normal view. I rebooted to recovery and ran patch then reboot and wouldn't get past vibrant screen. I will try again with i9000 rom and let you know the results.
Sent from my SGH-I897 using XDA
Tried it with i9000 rom but it aborted error status 7. I think my zip was bad. Going to try again.?
Sent from my SGH-T959 using xda premium
Edit: just read FAQ need to change some things in rom file. Will update after I try this
samsgun357 said:
Tried it with i9000 rom but it aborted error status 7. I think my zip was bad. Going to try again.?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Try to flash the Subzero kernel from here: (use build 80 not 128) http://rootzwiki.com/topic/22833-kernelics15-june-subzero-v14-build-128-brain-dead-and-loving-it/
If you already tried it from Subzero kernel; try the Glitch kernel, its on these dev sections.
Flash either of those to the ROM you currently have, and then try to flash it.
EDIT----------------
"if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad (windows)"
It's in the patch's thread.
Do that.
I followed the thread exactly used jota changed everything and tried again. It just aborts install. I haven't given up. Gonna try again tomorrow. It beat me tonight but not for good! Thanks for everything x.
Sent from my SGH-T959 using xda premium
firstly I want to tell you that because of not having a vibrant to test the patch is in beta
what you can do is open updater script with jota text editor and remove all those getprop lines from the script and as a security step what you can do is press menu button then tap on file and tap on line break then select (lf for android/Linux) save the file go to meta-inf folder and remove all those cert files
zip the package again and flash no need to sign it again for further help you can ask me also in the patch thread
dhlalit11 said:
firstly I want to tell you that because of not having a vibrant to test the patch is in beta
what you can do is open updater script with jota text editor and remove all those getprop lines from the script and as a security step what you can do is press menu button then tap on file and tap on line break then select (lf for android/Linux) save the file go to meta-inf folder and remove all those cert files
zip the package again and flash no need to sign it again for further help you can ask me also in the patch thread
Click to expand...
Click to collapse
Thanks for input. I first tried it using a captivate port and it would install then I would run patch and it wouldn't boot past vibrant screen. Then I got the original galaxy s rom that the cappy rom was ported from. It gave the error so I proceeded to change the file as per op instructions. It would abort install with but no error status. I did it twice to make sure. If I changed all the get prop from i9000 to t959 would it work?
Sent from my SGH-T959 using xda premium
you should not replace them instead just remove them
after flashing if it gives error then reboot device and with any root explorer app go to /cache/recovery and upload both the files I will see what the error is and then I can troubleshoot better
So guys I'm the twics porter to the cappy twics will soon be called remics I've been a part of a team that took over twics and I will soon be releasing to captivate
Sent From My ICS Cappy Using Tapatalk 2
patrick8996 said:
So guys I'm the twics porter to the cappy twics will soon be called remics I've been a part of a team that took over twics and I will soon be releasing to captivate
Sent From My ICS Cappy Using Tapatalk 2
Click to expand...
Click to collapse
Do you think it'd be possible for you to release a version for Vibrant as well? Since not much will have to be changed from Captivate.
Just modem/kernel, and possibly build.prop
dhlalit11 said:
you should not replace them instead just remove them
after flashing if it gives error then reboot device and with any root explorer app go to /cache/recovery and upload both the files I will see what the error is and then I can troubleshoot better
Click to expand...
Click to collapse
I did remove and it just aborts with no explanation.
Sent from my SGH-T959 using xda premium
xriderx66 said:
Do you think it'd be possible for you to release a version for Vibrant as well? Since not much will have to be changed from Captivate.
Just modem/kernel, and possibly build.prop
Click to expand...
Click to collapse
Yes please! I love it on my cappy and want it on my vibrant also!
Sent from my SGH-T959 using xda premium
and what about uploading the error log from /cache/recovery
I took the twics add on from mr.mad for gs1 running cm9/slim and flashed on my vibrant running gummy 1.2.6 and it got stuck on boot . I reflashed gummy without wiping and now have all the apps from add on except for tw launcher. I guess that's a happy medium until we can get a port.
Sent from my SGH-T959 using xda premium
dhlalit11 said:
and what about uploading the error log from /cache/recovery
Click to expand...
Click to collapse
How do I extract it from root browser?
Posse magnet......
samsgun357 said:
How do I extract it from root browser?
Posse magnet......
Click to expand...
Click to collapse
Just go to that file, copy it and paste it into your SD or something, and then upload it from there.
Because I have flashed a new rom and kernel the recovery log doesn't have the abort/error info...
Posse magnet......
Related
Here's a script I've built for my own ROM cooking purpose
another purpose was to create a very easy to read script, so everyone can understand the magic of deodex
had some hard time figuring all the BOOTCLASSPATH and all the signing magic (if you want to do it manually, the secret is: don't pack and sign!, just add the classes.odex to the original jar or apk...whatever...
or use my script to automagically do all that)
after one brick and jtag reincarnation and a few bootloops
I present to you:
DEODEXERIOUS !! (the only spartan deodex script)
requirements:
Linux
zip
* tested on my Ubuntu 10.10
instructions:
1. extract the included script
2. put the content of system(including the system folder) inside the rom folder
actually you can create a folder named system inside the rom folder and copy framwork and app folder there, it does not require any other files from the rom
3. while in the console inside the extracted script directory execute from the console
Code:
./deodexrom.sh
4. wait and watch the console for errors (there shouldn't be any)
5. when it is done, you should find the deodexed files inside the deodexed folder
* if you want to start over just execute from the same place in the console
Code:
./cleanall.sh
tested and successfully deodexed:
I897 UCKB1
I9088 KP2
I9088 ZNKP5
I9000 XXJPY
I9000 XWJS3
I9000 XWJS5
I9000 ZSJPG
I9000 XWJV1 2.3.2, except email.apk
it does not support already deodexed rom's!!! (why should it?)
if you test other raw versions (even captivate ones) please inform the result, or problems found, I'll do my best to help
careful
the script is a very initial version
it does inform errors human readable so watch the console for them
oh! almost forgot , here's the script:
http://dl.dropbox.com/u/3595341/deodexerious/deodexerious_03.zip
change log:
04/03/2011 - deodexerius_03
added gingerbread XWJV1 2.3.2 - custom classpaths
smali and baksmali 1.2.6
case insensitive classpath helpers
note:
deodexerius can deodex all XWJV1 2.3.2, except email.apk
27/02/2011 - deodexerius_02
better support for the additional files in kp5 and kp2
good luck!!
To Be Continued
If someone could come up with one of these for windows they would be my hero
Sent from my GT-I9000 using XDA App
rob989_69 said:
If someone could come up with one of these for windows they would be my hero
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
kind of like this one?
http://forum.xda-developers.com/showthread.php?t=700904
omg
You saved my life man... thanks a billion! And add a donate link, I know I'd like to send a few bucks your way
Pirateghost said:
kind of like this one?
http://forum.xda-developers.com/showthread.php?t=700904
Click to expand...
Click to collapse
If this works you are my hero!!! LOL. I've found a number of different ones, either they don't work or I'm not using them correctly but this one is new to me. Thanks.
rob989_69 said:
If someone could come up with one of these for windows they would be my hero
Click to expand...
Click to collapse
sorry man no windows version.
ytt3r said:
You saved my life man... thanks a billion! And add a donate link, I know I'd like to send a few bucks your way
Click to expand...
Click to collapse
your'e welcome.
rob989_69 said:
If this works you are my hero!!! LOL. I've found a number of different ones, either they don't work or I'm not using them correctly but this one is new to me. Thanks.
Click to expand...
Click to collapse
oh it works....
Just used this on KP2, works great, thanks!
existz said:
Just used this on KP2, works great, thanks!
Click to expand...
Click to collapse
great news!
works great with xwjs3
This is great. Works on the new KB1.
I keep seeing this while the script is running
Compiling classes.dex from rom/system/framework/framework-tests
UNEXPECTED TOP-LEVEL EXCEPTION:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.raiseBoundsError(libgcj.so.11)
at java.util.ArrayList.checkBoundExclusive(libgcj.so.11)
at java.util.ArrayList.get(libgcj.so.11)
at org.jf.dexlib.DexFile$2.placeAt(DexFile.java:783)
at org.jf.dexlib.DexFile.place(DexFile.java:659)
at org.jf.smali.main.fixInstructions(main.java:255)
at org.jf.smali.main.main(main.java:203)
Packing
Cleaning up
Done.
Cleaning up
Do I have to worry? I am going to try it again when it all completes, just want to make sure I am not missing anything
|OP|
it does not support already deodexed rom's!!! (why should it?)
Click to expand...
Click to collapse
what if you wanted to deodex a single new app? just redo the whole thing?
Trusselo said:
what if you wanted to deodex a single new app? just redo the whole thing?
Click to expand...
Click to collapse
To deodex a single app, you need to keep the deodexed framework files around. Then you can just do that app by pulling the code bits out of the framework.
Sent from my SAMSUNG-SGH-I897 using XDA App
Trusselo said:
what if you wanted to deodex a single new app? just redo the whole thing?
Click to expand...
Click to collapse
baksmali/smali + about 6 or 7 framework jars + cmd prompt = win!
How can I verify that the Deodex worked? I ran the script a couple times last night just to see what happens and then dropped the files in on my phone. Everything is working fine, just wanted to know how I can verify its deodexed.
nakedninja42 said:
How can I verify that the Deodex worked? I ran the script a couple times last night just to see what happens and then dropped the files in on my phone. Everything is working fine, just wanted to know how I can verify its deodexed.
Click to expand...
Click to collapse
do you see any .odex files named the same as your apks?
nakedninja42 said:
How can I verify that the Deodex worked? I ran the script a couple times last night just to see what happens and then dropped the files in on my phone. Everything is working fine, just wanted to know how I can verify its deodexed.
Click to expand...
Click to collapse
if you don't see errors like the one quoted bellow, then you should be fine.
nakedninja42 said:
I keep seeing this while the script is running
Compiling classes.dex from rom/system/framework/framework-tests
UNEXPECTED TOP-LEVEL EXCEPTION:
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
at java.util.ArrayList.raiseBoundsError(libgcj.so.11)
at java.util.ArrayList.checkBoundExclusive(libgcj.so.11)
at java.util.ArrayList.get(libgcj.so.11)
at org.jf.dexlib.DexFile$2.placeAt(DexFile.java:783)
at org.jf.dexlib.DexFile.place(DexFile.java:659)
at org.jf.smali.main.fixInstructions(main.java:255)
at org.jf.smali.main.main(main.java:203)
Packing
Cleaning up
Done.
Cleaning up
Do I have to worry? I am going to try it again when it all completes, just want to make sure I am not missing anything
Click to expand...
Click to collapse
actually this is an error, it means it failed to deodex this file
please provide more information, the reason can be many things:
java version
base rom
did you provide the full rom or only the file you mentioned?
provide more information and ill see what can be done.
ih4ckback said:
This is great. Works on the new KB1.
Click to expand...
Click to collapse
awesome.
marcelo.waisman said:
if you don't see errors like the one quoted bellow, then you should be fine.
actually this is an error, it means it failed to deodex this file
please provide more information, the reason can be many things:
java version
base rom
did you provide the full rom or only the file you mentioned?
provide more information and ill see what can be done.
awesome.
Click to expand...
Click to collapse
I am use the same KB1 that hit the forums yesterday that i4ackback stated that works for him. I installed Ubuntu 10.10 and installed Java from the software manager, not sure if its the right one. I started copying the full system folder but ended up only extracting just app and framework just like the OP states. That message appears throughout the process but I end up with everything in the deodexed folder.
Sent from my SAMSUNG-SGH-I897 using XDA App
After a few headaches and some claps on the forehead i finished a very alpha build of CM9 for the IDEOS X5. It was ported from the Galaxy W port of arco68 with the files of Aurora ICS and this guide.
I don't know the bugs, so please PM me if you find a bug.
NOTE: I think i am only too stupid to sign a zip, so you have to sign it by yourselves or toggle verification in the recovery.
Download
Mediafire
Thanks to fjsferreira for re-packung the boot.umg
Thanks to dzo for Aurora ICS
Thanks to arco68 for the Galaxy W ICS port
Thanks ti freeeyourandroid.com for the porting guide
alex1301 said:
After a few headaches and some claps on the forehead i finished a very alpha build of CM9 for the IDEOS X5. It was ported from the Galaxy W port of arco68 with the files of Aurora ICS and this guide.
I don't know the bugs, so please PM me if you find a bug.
NOTE: I think i am only too stupid to sign a zip, so you have to sign it by yourselves or toggle verification in the recovery.
Download
Mediafire
Thanks to fjsferreira for re-packung the boot.umg
Thanks to dzo for Aurora ICS
Thanks to arco68 for the Galaxy W ICS port
Thanks ti freeeyourandroid.com for the porting guide
Click to expand...
Click to collapse
Can't flash it, starts but then getting error and no message as the phone reboots. First time ever it has done something like this and my heart skipped...
cirnocirno said:
Can't flash it, starts but then getting error and no message as the phone reboots. First time ever it has done something like this and my heart skipped...
Click to expand...
Click to collapse
Did you toggle signature verification first?
Is there any chance for u8800pro?
Sent from my u8800pro using XDA
... finished a very alpha build of CM9 .....
Click to expand...
Click to collapse
Please go to advance edition and put a big ALPHA warning in the title thread.
why? is it that bad?
have you tyed? whats working and not?
thanks for ypu effort alex1301
r1c4rd0 said:
why? is it that bad?
have you tyed? whats working and not?
thanks for ypu effort alex1301
Click to expand...
Click to collapse
Alpha is not bad nor good, just a phase of software development. Please confirm the rom is working, otherwise I will move it to general section.
poyensa said:
Alpha is not bad nor good, just a phase of software development. Please confirm the rom is working, otherwise I will move it to general section.
Click to expand...
Click to collapse
i´m downloading it right now, and will test it in one hour and i will say someting here...
It doesn't install, always Error status 6 in CWM. I replaced the METAINF folder in the zip with aurora, and changed the name of the zip itself, then it installs, but doesn't boot...
Next, I replaced the boot.img inside with the 3.0.8_v2 from DZO, then it boots but never goes further than boot animation
It is not rom development if you just switch some of the files, compress the file into a .zip and post it here.
Can anyone have a look at it and help me? I think the problen is the updater script, because i've only copied the one from aurora.
Sent from my SGH-T989 using xda premium
I will do a port from desire z
Sent from my SGH-T989 using xda premium
will test it soon btw yeah port from desire z would be better.
i have only one problem. the guide says the Easiest way to replace the kernel is to take a kernel update zip for your device, un-zip it and rename the zImage file to "boot.img-kernel" and copy and replace the file of the same name in your directory.
but when i take the boot.img-kernel from the unpacked aurora boot.img, it has 2,6 mb, but when i rename the packed boot.img from aurora to boot.img-kernel it has 3.0 mb. which one should i take?
alex1301 said:
i have only one problem. the guide says the Easiest way to replace the kernel is to take a kernel update zip for your device, un-zip it and rename the zImage file to "boot.img-kernel" and copy and replace the file of the same name in your directory.
but when i take the boot.img-kernel from the unpacked aurora boot.img, it has 2,6 mb, but when i rename the packed boot.img from aurora to boot.img-kernel it has 3.0 mb. which one should i take?
Click to expand...
Click to collapse
Boot.img is ramdisk and kernel, compiled into one. You need kernel.
Unpack both boot images, replace kernel with auroras and change init.rc scripts to mount the correct partitions.
On mobile now so can't give a tutorial.
Sent from my U8800 using Tapatalk 2 Beta-5
the guide i follow says, that i only have to rename the init.devicename.rc to init.huawei.rc. should i also change the init.rc to the one of aurora?
does anyone have the mkbootimg for the X5?
alex1301 said:
does anyone have the mkbootimg for the X5?
Click to expand...
Click to collapse
We don't need to have any device specific mkbootimg, any mkbootimg will do it just fine
Sent from my U8800 using Tapatalk 2 Beta-5
i've uploaded a new version. it's ported from the desire z, but i think it's too big for the x5. i can't upload it to mediafire, because it doesn't load my files correct. so i only can upload it to dropbox, but there is also a limitation of downloads. http://db.tt/u8PrGM5m
alex1301 said:
i've uploaded a new version. it's ported from the desire z, but i think it's too big for the x5. i can't upload it to mediafire, because it doesn't load my files correct. so i only can upload it to dropbox, but there is also a limitation of downloads. http://db.tt/u8PrGM5m
Click to expand...
Click to collapse
Can you confirm this one boots?
Sent from my U8800
thanks a lot to amarullz for providing aroma installer, and thanks to nightshack0 I have taken his installer and modded to work according to my need but dont think that I have just copied and pasted the installer
had you ever feel that another galaxy s variant's forum have a ics rom which suits all your need but you cannot flash it because it is not yet ported to your device but now all this will not happen again with this patch you can install which ROM you want to flash there will be no boundation for you.
if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android
from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad++(windows)
Click to expand...
Click to collapse
this patch will let you flash other I9000 or t959 roms I have not tried it on other variant but you can try and let me know if it works, I have tried to flash a nexus s rom and it was not flashing so just flash and let me know there is no harm no soft brick no hard brick just physical button will not work until you flash this patch or another rom
Click to expand...
Click to collapse
how to use this patch:- first flash the rom you wanted then this patch and if rom is not flashing read the FAQ
Click to expand...
Click to collapse
download link
*AROMA compatible v1.2:- http://bit.ly/rompat12 (39mb)
* AROMA compatible v1.1:- http://bit.ly/JpHy83 (41mb)
* CAPRIVATE patch v1.0:- http://db.tt/35H5A9mH
Click to expand...
Click to collapse
PROS:- 1.flash which ics rom you want
2. new world with more rom have been revealed
3. rom chefs work have been reduced because now they do not need to port their rom.
4. small size just 12mb
5. TWRP kernel is pre bundled thanks to KRARVIND
Click to expand...
Click to collapse
CONS:- 1. you cannot get the build properties(build.prop) of the rom you are flashing instead you will get the build property which will not be related to any ics rom
Click to expand...
Click to collapse
the patch do not contains any file which can cause a bug and patch will only work on ics roms not gb
For further clarification read FAQ on second post
update:- keep the thanks coming guys and I will add the support of aroma installer and new things just keep me encouraged by pressing thanks
Click to expand...
Click to collapse
update 2:- hi all if you like my work please rate this thread with 5 stars and also submit it as news tip
Click to expand...
Click to collapse
update:- flashed fascinate rom by editing updater script and without resigning got it booted up but it cleared my efs folder so was not getting any network coverage, I got very depressed tried cleared data restore nandroid but nothing works then I thought about efs and with the backup I copy imei files to efs folder and after reboot I got coverage now I will not flash any fascinate rom just for testing but I can say that fascinate rom are working
Click to expand...
Click to collapse
PATCH FAQ
FAQ
Q.:- how to use this installer
Ans:- don't worry about this all the instruction have been given in the installer you just need to flash the package in recovery it is just like installation wizard of windows
Click to expand...
Click to collapse
Q.:- will this also work on gb rom
Ans:- no the patch contains a kernel which cannot work with gb rom
Click to expand...
Click to collapse
Q:- while flashing a galaxy s ics rom I got an error of assert failed what to do.
Ans:- first flash this patch then go to advance and select reboot recovery with new TWRP recovery flash the rom then again flash patch
Click to expand...
Click to collapse
Q.:- why you provided custom build.prop.
Ans:- if build.prop will not be provided then rom's build.prop will change you device's build properties which will not letyou flash files specially created for captivate
Click to expand...
Click to collapse
Q.:- can I flash another captivate ics kernel
Ans:- yes you can flash
Click to expand...
Click to collapse
Q.:- can I flash a kernel I9000 or T959
Ans:- no you cannot flash
Click to expand...
Click to collapse
Q.:- can you give some info about TWRP kernel
Ans:- a bigmem kernel with 720p recording patch originally can be found in Slim Ice rom thanks KRARVIND for this
Click to expand...
Click to collapse
Q.:- what can happen if I forgot to flash this patch
Ans:- nothing serious just the physical keys (menu, back etc.) will not work except this everything will be normal just boot to recovery and flash the patch and keys will work again
Click to expand...
Click to collapse
Q.:- I like your work where can I donate you
Ans:- my work is not that much to be donated and I got pocket money from my father I am just a teenager of seventeen just press thanks button and rate this thread with 5 stars, I will be happy
Click to expand...
Click to collapse
Q.:- Is there any modem provided Ans:- no, there is no modem in the package and will be provided in next update following in 3-5 days
Click to expand...
Click to collapse
WHAT'S NEW
v1.2
1. added bootanimation support
2. removed 30 data fix script
3. added vold.fstab
4. added shutdown charging animation files
5. only single modem is there to decrease size of the patch
6. added a new splash screen
v1.1
1. Added support of AROMA INSTALLER (thanks AMARULLZ)
2. Updated Semaphore kernel
3. Removed some unwanted files
4. Added some Init Scripts
5. Removed Lib files
6. Added Modem.bin
tested roms
a list of tested roms is here
1. infinitum (currently ported)
2. myics ultimate fusion
3. galaxy s cm9 kang build
4. team icssgs
Interesting. Will check it out
Sent from my SGH-I897 using xda premium
Interested to try this out... waiting for link. I'm feeling daring today.
edit: thread updated while I was posting- I'll report back when I try it out.
cool... So where is the link?
Sent from my SGH-I897 using XDA
guys I have just created the thread it will take time to complete link have been added
oooh whats this lol
sorta like Hellraiser from the infuse forum
Cool it's there yeah let's see )))))
Sent from my SGH-I897 using XDA
Really? Wow! that sounds awesome!! Gonna try it for sure.
Any feedback? Lol
Just to clarify
I flash this after ANY ICS rom on Any(galaxy s) Phone?(Such as Galaxy s II) Or Just for vibrant?
Also I flash the patch first then the rom Of My choice? Or what o.o
[email protected]$$ GONNA TRY THIS OUT NOW!
Sent from my SGH-I897 using xda premium
Can somebody explain how the hell I use this o.o Im confused
patrick8996 said:
Can somebody explain how the hell I use this o.o Im confused
Click to expand...
Click to collapse
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
shaker2k said:
Hi confused! I'm perplexed. Would like to this as well.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
patrick8996 said:
Lol Guess Im gonna try it o.o
Gonna flash this patch and find advanced(wherever that may be) and then flash an SGSII Rom
Click to expand...
Click to collapse
I think it's just i9000 and i9020 (google nexus). Not sure though.
swayjd said:
I think it's just i9000 and i9020 (google nexus). Not sure though.
Click to expand...
Click to collapse
damn it o.o
so i can flash a nexus one ics rom on my cappy? i dont get it
@OP, can you explain us what this does?
***UPDATE 6/21/12***
CLICK HERE to download latest version
MAKE A BACKUP IN CWM
PLEASE READ THIS AFTER INSTALLING LATEST VERSION:
http://forum.xda-developers.com/showpost.php?p=27761500
***UPDATE***
I RECOMMEND A FULL WIPE ON THIS INSTALL. IF YOU DO NOT WIPE, AND SOMETHING BREAKS, FLASH AGAIN WITH WIPE AND THEN REPORT IF THE PROBLEM STILL EXISTS.
Changelog:
Full changelog is available to read in aroma, these are just the changes for the port.
-Updated ROM to latest version from DJSound
-Edited build.prop to match our device
-Updated build.prop to point to port version of OTA code
-Updated devil and semaphore kernels to latest version
This is a port of DJSound's TiramiSlim for the i9000.
OLD DOWNLOAD (RC2)
CLICK HERE
Instructions to flash (from original thread):
From ICS (any 4.0 ROM) or from RC2
1) Place the ROM on your Internal-SD Card
2) Go into recovery mode
3) Wipe data | Wipe Cache | Wipe Dalvik Cache | Format /System (repeat these steps 2 times just for security)
4) Flash the ROM and follow the AROMA Installer instructions.
5) Reboot
Guide when you are on a Gingerbread ROM:
1) Flash a Stock Gingerbread ROM
2) Flash a custom GB kernel
3) Flash an ICS kernel
4) Your phone will go into a bootloop -> Remove the battery and put it back.
5) Use 3-button-combo to get into recovery.
6) USB-Mount your SD Card & Place the ROM on your Internal-SD Card (or do this first...)
7) Flash the ROM and follow the AROMA Installer instructions.
8) Reboot & Enjoy!
Original thread:
http://forum.xda-developers.com/showthread.php?t=1664049
Any problems, suggestions, comments, feel welcome to post.
Standard Disclaimer Mumbo Jumbo about spontaneous combustion, girlfriend breaking up with you, sky falling, other funny stuff, etc. Once you flash, I will be more than happy to help, but remember a couple things:
-I do not offer a warranty, your manufacturer's/carrier's warranty is now void.
-I am not responsible for what to do to your device.
-I am only human, so don't expect me or my ROM to behave perfectly!
This ROM is being updated by the original dev, when he updates, I will update. Otherwise, updates solely by me will happen when I see fit or when someone suggests a change or brings up a problem.
When providing bug reports, please provide some simple information such as:
ROM version (I know it's just the first version, but for future reference...)
Steps you followed to install (yes, write them out)
ROM you came from
If you wiped ALL (data/cache/dalvik/system)
If you restored ANYTHING (ex. with Titanium Backup)
Steps to recreate the problem/any useful info about the problem.
Happy flashing!
Sounds pretty good. Looking forward to trying it.
Sent from my SGH-I897 using xda premium
Can't Wait!!!
Link is up!
Who wants to be first?
joshlevinson said:
Who wants to be first?
Click to expand...
Click to collapse
As soon as I get home!!!
Sent from my SGH-I897 using xda premium
Messaging keeps forcing close
Sent from my SGH-I897 using xda premium
zzmomo73 said:
Messaging keeps forcing close
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Refer to OP for bug report guide. Edited for brevity.
joshlevinson said:
When providing bug reports, please provide some simple information such as:
ROM version (I know it's just the first version, but for future reference...)
Steps you followed to install (yes, write them out)
ROM you came from
If you wiped ALL (data/cache/dalvik/system)
If you restored ANYTHING (ex. with Titanium Backup)
Steps to recreate the problem/any useful info about the problem.
Click to expand...
Click to collapse
Ok so wiped everything twice like you said... Chose custom installation (the one where you don't have to reinstall the ROM for changing anything) and I chose devil kernel, stock theme, and the some apps. But I noticed that when I go to settings /about phone every thing there is from the rom I was running before this, like kernel and mod version.. I believe this ROM is based on slim but it has an aokp theme (the one I had before fishing this.) And if I go to system/xxxx everything there is also from the previous ROM I was running. but the ROM is very fast smooth and responsive. I came from simply aokp v6
Sent from my SGH-I897 using xda premium
zzmomo73 said:
Ok so wiped everything twice like you said... Chose custom installation (the one where you don't have to reinstall the ROM for changing anything) and I chose devil kernel, stock theme, and the some apps. But I noticed that when I go to settings /about phone every thing there is from the rom I was running before this, like kernel and mod version.. I believe this ROM is based on slim but it has an aokp theme (the one I had before fishing this) but the ROM is very fast smooth and responsive.
Edit: I came from simply aokp v6
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Correct, this is a mod of SlimICS, hence TiramiSLIM. So...your issue with messaging FC'ing remains? And to clarify...what kernel and mod version show up in your current setup?
Also, what messaging app did you install? Inverted? Stock?
joshlevinson said:
Correct, this is a mod of SlimICS, hence TiramiSLIM. So...your issue with messaging FC'ing remains? And to clarify...what kernel and mod version show up in your current setup?
Also, what messaging app did you install? Inverted? Stock?
Click to expand...
Click to collapse
OK so I wiped everything again and tried installing it using default from aroma installer and all is well...after that I flashed using modify me and worked perfect..no fC's or anything!, thanks for porting this for us
Sent from my GT-I9000 using xda premium
Great!
Glad it worked for you, and thanks for keeping the issue updated!
Thanks for porting this. I hope to see your thanks meter continue to go up. I know it more than doubled today!
A couple questions if you don't mind-
On the original post in the I9000 forums, they have some sweet themes. What is the best way to go about getting those? Are they available for the captivate?
I found in that forum that others are trying out different kernels. Have you experimented at all? It seems to me that the one that comes with it doesn't support overclock and BLN through NSTools.
EDIT: The latest version of Devil Kernel works for me so far.
wwcjr91 said:
Thanks for porting this. I hope to see your thanks meter continue to go up. I know it more than doubled today!
A couple questions if you don't mind-
On the original post in the I9000 forums, they have some sweet themes. What is the best way to go about getting those? Are they available for the captivate?
I found in that forum that others are trying out different kernels. Have you experimented at all? It seems to me that the one that comes with it doesn't support overclock and BLN through NSTools.
Click to expand...
Click to collapse
you can find them from the update me app
Sent from my SGH-I897 using xda premium
wwcjr91 said:
Thanks for porting this. I hope to see your thanks meter continue to go up. I know it more than doubled today!
A couple questions if you don't mind-
On the original post in the I9000 forums, they have some sweet themes. What is the best way to go about getting those? Are they available for the captivate?
I found in that forum that others are trying out different kernels. Have you experimented at all? It seems to me that the one that comes with it doesn't support overclock and BLN through NSTools.
Click to expand...
Click to collapse
thanks Zzmomo. Use update-me app for themes (instructions are in original thread). kernels can be flashed in aroma installer. Update me app probably has i9000 kernels...I'll check this out.
So yeah...I'll have to release an update to the ROM to fix the update me app for the captivate. I'll probably also release an update.zip so current users don't have to download the whole ROM again.
Sent from my GT-I9000 using xda premium
joshlevinson this is a very nice rom. works like a charm !!! thank you so much for this!
I was messing around a bit and tried putting galaxy s3 ui sound instead of the regular ones. I replaced them using Root explorer and changed all the permissions to the right one and rebooted but it didn't work so I tried putting the default ones back but still didn't work... Any way I can get then back without having to reflash the ROM.. And if I do have to reflash it do I need to wipe or not
Sent from my SGH-I897 using xda premium
Did you replace the sounds in the aroma installer, or just by using root explorer? Please explain the process a bit more.
joshlevinson said:
Did you replace the sounds in the aroma installer, or just by using root explorer? Please explain the process a bit more.
Click to expand...
Click to collapse
I replaced them in root explorer, but no ui sound came out... So I tried reflashing with wiping key cache and dalvik but still didn't work...
Sent from my SGH-I897 using xda premium
What files/location did you replace, and where did you get these files? Also, please detail every step you made in the reflash process.
joshlevinson said:
What files/location did you replace, and where did you get these files? Also, please detail every step you made in the reflash process.
Click to expand...
Click to collapse
OK for replacing the file, I got them from team remics and I took system/media/audio/UI and replaced them with the ones from this rom. Set permissions and rebooted...
Then for the reflash process I wiped cache and dalvik cache , used modify me and selected devil, then replaced galaxy s3 and delete default sound, and selected some apps.. and rebooted but still no sound... so then I reflashed using default installation and then flashed again using modify me and all worked. Sorry for the trouble
Sent from my SGH-I897 using xda premium
multi window mod is now working for P6800 users...see the link below
http://forum.xda-developers.com/showthread.php?t=2346827
Thanks for offering your time here.
The P6810 is STILL waiting for 4.1.2 update. Samsung need to pull their finger out.....
Sent from my GT-I9500 using xda premium
Reserved........ -_- Don't question.
UpInTheAir said:
Thanks for offering your time here.
The P6810 is STILL waiting for 4.1.2 update. Samsung need to pull their finger out.....
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
That would probably explain why i didn't see any then...lol. Sorry to get your hopes up guys...BUT they do have a rom called "erobot" that claims to be touchwiz 4.1.2(may be a port) but that just might work if some one is willing to try it
http://forum.xda-developers.com/showthread.php?t=2276509
^this is a link to the thread about the rom although the actual file is on another site & seems to be in THAI
THEDEVIOUS1 said:
That would probably explain why i didn't see any then...lol. Sorry to get your hopes up guys...BUT they do have a rom called "erobot" that claims to be touchwiz 4.1.2(may be a port) but that just might work if some one is willing to try it
http://forum.xda-developers.com/showthread.php?t=2276509
^this is a link to the thread about the rom although the actual file is on another site & seems to be in THAI
Click to expand...
Click to collapse
Thanks. They have it posted on this 7.7 forum for P6800.
OT,
I built a P6800 JB 4.1.2 ROM for my P6810 (correct mounts etc).. compiled P6810 JB kernel from P6800 JB sources using a P6810 config......didn't boot. Suspect kernel fault or need to flash new P6800 JB bootloader. Have since deleted my work and got other things going.
Sent from my GT-I9500 using xda premium
we did have official 4.1.2 on 6800... I have already upload the android.policy.jar on the [email protected]
with the help of THEDEVIOUS1... we have multiwindows icon now... still not working well but its a starttt.....
edan1979 said:
we did have official 4.1.2 on 6800... I have already upload the android.policy.jar on the [email protected]
with the help of THEDEVIOUS1... we have multiwindows icon now... still not working well but its a starttt.....
Click to expand...
Click to collapse
are u saying the buttons located at the bottom on the status bar are not working because if so thats a known issue. What happens when u hit the maximize/restore icon in the top/lower right corner? Does the app float or does the icon even appear at all? What happens when u drag an app from the tray then drag another app from the tray?
as i replied on the 6200 post... the apps only open as usual apps... the resize or switch icon does not appear anywhere...
edan1979 said:
as i replied on the 6200 post... the apps only open as usual apps... the resize or switch icon does not appear anywhere...
Click to expand...
Click to collapse
apparently i just got really lucky that these combination of files just happen to work on our device *shrugs*
if u are rooted try to replace the "multiwindow.tablet.xml" file in "system - etc - permissions" with this "multiwindow.phone.xml"(dont forget to set permissions & reboot) attached below & see if that makes a difference(floating windows shouldn't work but dual panel might)
i'm also a lil concerned since this isnt a pure stock rom but since its mixed with plus & note 8 files it seems like it should work
View attachment com.sec.feature.multiwindow.phone.rar
still the same... nvm then... will experiment on it... got to go back to work now... thanks for the great start... ^_^
edan1979 said:
still the same... nvm then... will experiment on it... got to go back to work now... thanks for the great start... ^_^
Click to expand...
Click to collapse
i just got finishing comparing the code in the "phonewindowmanager.smali" and it's literally like 4 numbers from being identical...lol if you're not bothered by boot looping i actually would try the p6200 zip from the post in our forum. If it boots but still doesnt work then at least we can rule out what it isn't...so whenever u find time give that a try but of course backup before u do
hahaha... actually i had already test it before you even request for the android.policy.jar
it bootloop alright...
going to test it with the stock firmware... but i need to find time to complete the deodexed stock firmware... its being pending for a while as i need to figure out how to deodexed JB... kind of little bit different from ICS
here is the file from stock deodex Thai ROM P6800DXMD3
Maybe it will help if something was modified in eRobot ROM
has go back to stock... but still... the same... but the minibar icon is missing...
new version
edan1979 said:
has go back to stock... but still... the same... but the minibar icon is missing...
Click to expand...
Click to collapse
i just created a new version for the Tab Plus with the pin & window resize functions working. I made 2 new zips for u guys to try but again no promises so be sure to backup...the files are a lot larger this time(around 42MB) so i had to upload to another site. Before u flash u MUST enable a live wallpaper for your lockscreen background due to a freezing issue with the ripple effect option(please read the update section of my original post in the p6200 forums)
http://www.filedropper.com/p6800stockmd3multiwindowv2
^stock version
http://www.filedropper.com/p6800erobotmultiwindowv2
^ ERobot version
If neither one of these works then swap out the "services.jar" file i've attached below which is located in the "system - framework" folder
View attachment services.jar
double post...please delete
Flashed stock version and after Samsung logo I have a window like when apps are updating but its name is %1$s, %2$s and content is Noon
After 1or 2 minutes - bootloop
yup showing the same symptom...
i check the file you upload and there were systemui and framework as well... it might not be the same with the one use int the system hence crash occur... i'll upload the files from e-robot
http://www.mediafire.com/download/lktyml3dz2scjy9/erobotfiles.rar
edan1979 said:
yup showing the same symptom...
i check the file you upload and there were systemui and framework as well... it might not be the same with the one use int the system hence crash occur... i'll upload the files from e-robot
http://www.mediafire.com/download/lktyml3dz2scjy9/erobotfiles.rar
Click to expand...
Click to collapse
One more idea...pull your systemui.apk from the rom your using, replace the one in the zip & try again
still the same