[ROM] [ALPHA] CyanogenMod9 By alex1301 - Huawei Ideos X5 U8800

After a few headaches and some claps on the forehead i finished a very alpha build of CM9 for the IDEOS X5. It was ported from the Galaxy W port of arco68 with the files of Aurora ICS and this guide.
I don't know the bugs, so please PM me if you find a bug.
NOTE: I think i am only too stupid to sign a zip, so you have to sign it by yourselves or toggle verification in the recovery.
Download
Mediafire
Thanks to fjsferreira for re-packung the boot.umg
Thanks to dzo for Aurora ICS
Thanks to arco68 for the Galaxy W ICS port
Thanks ti freeeyourandroid.com for the porting guide

alex1301 said:
After a few headaches and some claps on the forehead i finished a very alpha build of CM9 for the IDEOS X5. It was ported from the Galaxy W port of arco68 with the files of Aurora ICS and this guide.
I don't know the bugs, so please PM me if you find a bug.
NOTE: I think i am only too stupid to sign a zip, so you have to sign it by yourselves or toggle verification in the recovery.
Download
Mediafire
Thanks to fjsferreira for re-packung the boot.umg
Thanks to dzo for Aurora ICS
Thanks to arco68 for the Galaxy W ICS port
Thanks ti freeeyourandroid.com for the porting guide
Click to expand...
Click to collapse
Can't flash it, starts but then getting error and no message as the phone reboots. First time ever it has done something like this and my heart skipped...

cirnocirno said:
Can't flash it, starts but then getting error and no message as the phone reboots. First time ever it has done something like this and my heart skipped...
Click to expand...
Click to collapse
Did you toggle signature verification first?

Is there any chance for u8800pro?
Sent from my u8800pro using XDA

... finished a very alpha build of CM9 .....
Click to expand...
Click to collapse
Please go to advance edition and put a big ALPHA warning in the title thread.

why? is it that bad?
have you tyed? whats working and not?
thanks for ypu effort alex1301

r1c4rd0 said:
why? is it that bad?
have you tyed? whats working and not?
thanks for ypu effort alex1301
Click to expand...
Click to collapse
Alpha is not bad nor good, just a phase of software development. Please confirm the rom is working, otherwise I will move it to general section.

poyensa said:
Alpha is not bad nor good, just a phase of software development. Please confirm the rom is working, otherwise I will move it to general section.
Click to expand...
Click to collapse
i´m downloading it right now, and will test it in one hour and i will say someting here...

It doesn't install, always Error status 6 in CWM. I replaced the METAINF folder in the zip with aurora, and changed the name of the zip itself, then it installs, but doesn't boot...
Next, I replaced the boot.img inside with the 3.0.8_v2 from DZO, then it boots but never goes further than boot animation

It is not rom development if you just switch some of the files, compress the file into a .zip and post it here.

Can anyone have a look at it and help me? I think the problen is the updater script, because i've only copied the one from aurora.
Sent from my SGH-T989 using xda premium

I will do a port from desire z
Sent from my SGH-T989 using xda premium

will test it soon btw yeah port from desire z would be better.

i have only one problem. the guide says the Easiest way to replace the kernel is to take a kernel update zip for your device, un-zip it and rename the zImage file to "boot.img-kernel" and copy and replace the file of the same name in your directory.
but when i take the boot.img-kernel from the unpacked aurora boot.img, it has 2,6 mb, but when i rename the packed boot.img from aurora to boot.img-kernel it has 3.0 mb. which one should i take?

alex1301 said:
i have only one problem. the guide says the Easiest way to replace the kernel is to take a kernel update zip for your device, un-zip it and rename the zImage file to "boot.img-kernel" and copy and replace the file of the same name in your directory.
but when i take the boot.img-kernel from the unpacked aurora boot.img, it has 2,6 mb, but when i rename the packed boot.img from aurora to boot.img-kernel it has 3.0 mb. which one should i take?
Click to expand...
Click to collapse
Boot.img is ramdisk and kernel, compiled into one. You need kernel.
Unpack both boot images, replace kernel with auroras and change init.rc scripts to mount the correct partitions.
On mobile now so can't give a tutorial.
Sent from my U8800 using Tapatalk 2 Beta-5

the guide i follow says, that i only have to rename the init.devicename.rc to init.huawei.rc. should i also change the init.rc to the one of aurora?

does anyone have the mkbootimg for the X5?

alex1301 said:
does anyone have the mkbootimg for the X5?
Click to expand...
Click to collapse
We don't need to have any device specific mkbootimg, any mkbootimg will do it just fine
Sent from my U8800 using Tapatalk 2 Beta-5

i've uploaded a new version. it's ported from the desire z, but i think it's too big for the x5. i can't upload it to mediafire, because it doesn't load my files correct. so i only can upload it to dropbox, but there is also a limitation of downloads. http://db.tt/u8PrGM5m

alex1301 said:
i've uploaded a new version. it's ported from the desire z, but i think it's too big for the x5. i can't upload it to mediafire, because it doesn't load my files correct. so i only can upload it to dropbox, but there is also a limitation of downloads. http://db.tt/u8PrGM5m
Click to expand...
Click to collapse
Can you confirm this one boots?
Sent from my U8800

Related

Stockwells porting script question.

As some of you know, stockwell has a miui porting script. I just began to wonder, can it be modified to port other roms from desire z? If someone could alter it a bit try to port one of desire z roms. I have very little knowledge on linux, but someone with more could do it.
Ret4rt and darksage have this script. They can answer to this question.
Sent from my Huawei Ideos X5
julle131 said:
As some of you know, stockwell has a miui porting script. I just began to wonder, can it be modified to port other roms from desire z? If someone could alter it a bit try to port one of desire z roms. I have very little knowledge on linux, but someone with more could do it.
Click to expand...
Click to collapse
U could try and just read the script from the github.. U could see the script will automatically add and replace some files and delete unnecessary file from Desire-Z ROM.. U can do it using windows AFAIK... Try using this tutorial
http://www.freeyourandroid.com/guide/porting-android to know exactly what to put to get the phone booting..
Do you have a link to the script?
PaulMilbank said:
Do you have a link to the script?
Click to expand...
Click to collapse
https://github.com/stockwell/MIUI-U8800-Port-Script/blob/master/miui_u8800_port.sh
For those who dont know Linux that well (Me too!), u need to figure out those function(rm=remove, cp=copy) and replace it manually in windows..
But updater-script could make it even harder.
Sent from my u8800 using XDA App
julle131 said:
But updater-script could make it even harder.
Sent from my u8800 using XDA App
Click to expand...
Click to collapse
Stockwell make it easy for us actually, if u check that github, there's an "overlay" folder.. Inside is all the file needed to add into the desire-z rom,
including the updater script (/ overlay / META-INF / com / google / android )..
izzoe said:
Stockwell make it easy for us actually, if u check that github, there's an "overlay" folder.. Inside is all the file needed to add into the desire-z rom,
including the updater script (/ overlay / META-INF / com / google / android )..
Click to expand...
Click to collapse
Okay. I need to install ubuntu to my pc then amd try.
Sent from my Desire HD using XDA App

[GUIDE] How to port AOSP ICS roms to your Device

How to port any ICS AOSP based roms to your Device (AOKP, CM9 & many other)
- for best compatibilty
--> use same android versions. (4.0.4 -> 4.0.4 example)
--> use latest base from CM9 (is best choose for port) or any AOSPbased ICS ROM
--> use each brand for port (mean Desire HD -> Desire S or other HTC devices). you also can port other roms, but you will have issues.
PORT:
-> download latest cm9 base and extract it
-> download target rom and extract it
for Camera
use Camera.apk from base rom for camera issues fix.
Click to expand...
Click to collapse
copy
/app
/framework
/media
/fonts folders and replace in cm9 folder.
repack your zip and let it boot.
if it doesn't boot then copy /system/lib/libandroid_runtime.so from target rom and repack your rom.zip and install again.. if you get bootloop anyway, then just type in adb "adb logcat" and share it with us in this thread..
if you dont get success dont cry, just try to port another rom you can not port all roms
for HTC Devices
to fix network auto select,
decompile framework-res.apk
go to \framework-res\res\values\bools.xml change
<bool name="skip_restoring_network_selection">true</bool>
to false.
Click to expand...
Click to collapse
to fix graphichal issues,
decompile framework.jar
change these files with cm9 base
smali\smali\android\os
Environment
SystemProperties
smali\smali\android\view
HardwareCanvas
HardwareRenderer$Gl20Renderer
HardwareRenderer$GlRenderer
HardwareRenderer
Click to expand...
Click to collapse
Click to expand...
Click to collapse
enjoy!
if you like this guide, just give 5 stars to thread and click thanks button
hi, there, and i own a huawei u8800, we allready have a aosp ics 4.0.4 aurora room but i would like to have cm9 or aokp into our phone. in this case based is aosp ics aurora and ported will be cm9 or aokp for example? i´m right?
maybe is better port cm9 from desire z to my huawei u8800, since they have the same cpu and gpu.
dont want tou build a rom, just port.
please i need help. thanks anyway.
lol be thankful you have an ICS rom.. Huawei X6 users like me are trying our best to port from u8860's ICS.
I'd like to ask if the method works for a device that does not have official ICS? i.e. porting an ICS rom to official GB?
Kindly advise sir, and thanks again!
I get the same that in miui v4... boot loop and adb says no device
I get AtCmdFwd error.
Could you post the link of latest cm9 base?
im getting stuck in a bootloop...
INFO:
Device-Samsung Infuse
CM9 Base being used to port- http://forum.xda-developers.com/showthread.php?t=1601844
Rom trying to port- http://www.slimroms.com/ (the i9000 version aka galaxy s)
What i did:
1) opened cm9 base with 7zip, deleted app, framework, fonts, media folders
2) replaced deleted folders with app, framework, fonts and media folders from slim ics base 3.6
3) opened up slim ics 3.6 i9000 essentials with 7zip
4)navigated to app folder and moved apks files from ther to the cm9 base - did the same with framework, fonts, and media folders (I did not just copy the folders this time! i only copied the files inside the folders)
5) put zip on sdcard
6) rebooted and started log cat
any help would be apreciated if i dont answer back right away its because i have to pick my sister up from school
Here are the logcats: (All are the same logcat...but two of them are filtered)
I think I kniw what the problem is...gonna attemot a fix after dinner
EDIT i got out of the boot loops and booted into my portes slimics...now to fix the bugs...there is ALOT
thanks for the guide will def give you some credit once i get this stable...may be getting some help from another dev
So as long as the base and ported roms are from the same manufacturer, this will work?
Sent from my LG-E739 using Tapatalk 2
how to port aosp ics to cm9?
good guide
You can add
Copy etc\cron
And etc\init.d files to run RomControl fix
Am stuck at logo screen.
Can't get logcat because ADB can't find my device.
What to do?
Sent from my LG-E739 using Tapatalk 2
mg2195 said:
I think I kniw what the problem is...gonna attemot a fix after dinner
EDIT i got out of the boot loops and booted into my portes slimics...now to fix the bugs...there is ALOT
thanks for the guide will def give you some credit once i get this stable...may be getting some help from another dev
Click to expand...
Click to collapse
Can you please tell what was the problem and how did you fixed? Thanks.
medicjunKie said:
So as long as the base and ported roms are from the same manufacturer, this will work?
Sent from my LG-E739 using Tapatalk 2
Click to expand...
Click to collapse
It would be sane screen res e.g HDPI to HDPI
And also the same processor type too helps
Sent from my LT15i using xda premium
see i hve a question...., what does base mean? does it mean the ics rom which i hve for my device already ported or any ics rom available for my device's manufacturer?
like my phone is samsung galaxy 3....so shud the base be the rom which is available for my g3 or it can be any ics rom like say ics rom for samsung galax s?
---------- Post added at 09:37 AM ---------- Previous post was at 09:36 AM ----------
i m seriously cponfused with that part..... m not gettin g what the base and the rom to be ported shud be?
My logcat ...?? what can i do? http://www.embedupload.com/?d=4HKCKXGIK2
I'm trying to port slimICS and it gets stuck at boot. Here's my logcat if it helps.
http://logcat.miui.us/893012
Zorua said:
I'm trying to port slimICS and it gets stuck at boot. Here's my logcat if it helps.
http://logcat.miui.us/893012
Click to expand...
Click to collapse
see here
Code:
169: E/dalvikvm( 1190): ERROR: couldn't find native method
170:
171: E/dalvikvm( 1190): Requested: Lcom/android/server/PowerManagerService;.nativeStartSurfaceFlingerOffAnimation:(I)V
172:
173: E/JNIHelp ( 1190): RegisterNatives failed for 'com/android/server/PowerManagerService', aborting
baksmali classes.dex of services.jar
find PowerManagerService.smali file in the path com/android/server
add line
Code:
.method private native nativeStartSurfaceFlingerOffAnimation(I)V
.end method
tathanhlam66 said:
see here
Code:
169: E/dalvikvm( 1190): ERROR: couldn't find native method
170:
171: E/dalvikvm( 1190): Requested: Lcom/android/server/PowerManagerService;.nativeStartSurfaceFlingerOffAnimation:(I)V
172:
173: E/JNIHelp ( 1190): RegisterNatives failed for 'com/android/server/PowerManagerService', aborting
baksmali classes.dex of services.jar
find PowerManagerService.smali file in the path com/android/server
add line
Code:
.method private native nativeStartSurfaceFlingerOffAnimation(I)V
.end method
Click to expand...
Click to collapse
I don't have the folder com/android/server/. What am I doing wrong?
EDIT: Wow, I sound so stupid. Nvm, I did that edit. I had to look up smali and baksmali guides. I'll flash it and see if it boots.
Okay, still refusing to boot.
New logcat: http://logcat.miui.us/894002
EDIT 2: Booted but storage isn't working.
Logcat: http://logcat.miui.us/889025
Zorua said:
EDIT 2: Booted but storage isn't working.
Logcat: http://logcat.miui.us/889025
Click to expand...
Click to collapse
Try decompiling the framework-res.apk and change the storage-list.xml in the xml folder.

TWICS

Captivate currently had TWICS. Its base code from cm9 with TW launcher and Samsung gs3 add on with devil kernel. Running this o my cappy. Super fast and stable. Just an outstanding rom.
Can someone port this to vibrant please!
What are you looking at shortbus......
*NOT SURE/CONFIRMED
But since it is in the line of the original galaxy s, I think you can just flash it, and then change modem/kernel/key layout, which is done by a script (forgot what its called in our development section)
ok, i found it
http://forum.xda-developers.com/showthread.php?t=1623840
Using that, you SHOULD be able to flash any Galaxy S ROM (except the 4G)
If it doesn't work, nothing will go wrong, most likely you will
1) boot loop
2) key layout will be mixed up(easy fix)
3) no connection (change modem/kernel)
*you said this was TWICS, make sure it is ICS and not just themed to look like TWICS.
Link to rom please?
http://forum.xda-developers.com/showthread.php?t=1625619
What are you looking at shortbus......
hey, instead of using it from the captivate, use it from the i9000
http://forum.xda-developers.com/showthread.php?t=1608624
same thing, captivate guy ported from i9000, just you'll probably get updates etc faster.
P.S. tell us how it goes.
xriderx66 said:
hey, instead of using it from the captivate, use it from the i9000
http://forum.xda-developers.com/showthread.php?t=1608624
same thing, captivate guy ported from i9000, just you'll probably get updates etc faster.
P.S. tell us how it goes.
Click to expand...
Click to collapse
OK so I tried it from the captivate before I saw this post. Installed rom and before it gave install complete it auto rebooted. The rom was on my phone but up was down left was right ie screen was in landscape then when I turn it sideways it would go to normal view. I rebooted to recovery and ran patch then reboot and wouldn't get past vibrant screen. I will try again with i9000 rom and let you know the results.
Sent from my SGH-I897 using XDA
Tried it with i9000 rom but it aborted error status 7. I think my zip was bad. Going to try again.?
Sent from my SGH-T959 using xda premium
Edit: just read FAQ need to change some things in rom file. Will update after I try this
samsgun357 said:
Tried it with i9000 rom but it aborted error status 7. I think my zip was bad. Going to try again.?
Sent from my SGH-T959 using xda premium
Click to expand...
Click to collapse
Try to flash the Subzero kernel from here: (use build 80 not 128) http://rootzwiki.com/topic/22833-kernelics15-june-subzero-v14-build-128-brain-dead-and-loving-it/
If you already tried it from Subzero kernel; try the Glitch kernel, its on these dev sections.
Flash either of those to the ROM you currently have, and then try to flash it.
EDIT----------------
"if you are getting status 7 or getprop error then a little work from your side is needed
extract the rom to a folder then go to /extracted folder/META - INF/com/Google/Android from there open updater-script and remove all getprop lines
come back to META - INF folder and delete all three files
zip the file and flash it in recovery
NOTE:- to edit updater script use jota text editor(android), notepad (windows)"
It's in the patch's thread.
Do that.
I followed the thread exactly used jota changed everything and tried again. It just aborts install. I haven't given up. Gonna try again tomorrow. It beat me tonight but not for good! Thanks for everything x.
Sent from my SGH-T959 using xda premium
firstly I want to tell you that because of not having a vibrant to test the patch is in beta
what you can do is open updater script with jota text editor and remove all those getprop lines from the script and as a security step what you can do is press menu button then tap on file and tap on line break then select (lf for android/Linux) save the file go to meta-inf folder and remove all those cert files
zip the package again and flash no need to sign it again for further help you can ask me also in the patch thread
dhlalit11 said:
firstly I want to tell you that because of not having a vibrant to test the patch is in beta
what you can do is open updater script with jota text editor and remove all those getprop lines from the script and as a security step what you can do is press menu button then tap on file and tap on line break then select (lf for android/Linux) save the file go to meta-inf folder and remove all those cert files
zip the package again and flash no need to sign it again for further help you can ask me also in the patch thread
Click to expand...
Click to collapse
Thanks for input. I first tried it using a captivate port and it would install then I would run patch and it wouldn't boot past vibrant screen. Then I got the original galaxy s rom that the cappy rom was ported from. It gave the error so I proceeded to change the file as per op instructions. It would abort install with but no error status. I did it twice to make sure. If I changed all the get prop from i9000 to t959 would it work?
Sent from my SGH-T959 using xda premium
you should not replace them instead just remove them
after flashing if it gives error then reboot device and with any root explorer app go to /cache/recovery and upload both the files I will see what the error is and then I can troubleshoot better
So guys I'm the twics porter to the cappy twics will soon be called remics I've been a part of a team that took over twics and I will soon be releasing to captivate
Sent From My ICS Cappy Using Tapatalk 2
patrick8996 said:
So guys I'm the twics porter to the cappy twics will soon be called remics I've been a part of a team that took over twics and I will soon be releasing to captivate
Sent From My ICS Cappy Using Tapatalk 2
Click to expand...
Click to collapse
Do you think it'd be possible for you to release a version for Vibrant as well? Since not much will have to be changed from Captivate.
Just modem/kernel, and possibly build.prop
dhlalit11 said:
you should not replace them instead just remove them
after flashing if it gives error then reboot device and with any root explorer app go to /cache/recovery and upload both the files I will see what the error is and then I can troubleshoot better
Click to expand...
Click to collapse
I did remove and it just aborts with no explanation.
Sent from my SGH-T959 using xda premium
xriderx66 said:
Do you think it'd be possible for you to release a version for Vibrant as well? Since not much will have to be changed from Captivate.
Just modem/kernel, and possibly build.prop
Click to expand...
Click to collapse
Yes please! I love it on my cappy and want it on my vibrant also!
Sent from my SGH-T959 using xda premium
and what about uploading the error log from /cache/recovery
I took the twics add on from mr.mad for gs1 running cm9/slim and flashed on my vibrant running gummy 1.2.6 and it got stuck on boot . I reflashed gummy without wiping and now have all the apps from add on except for tw launcher. I guess that's a happy medium until we can get a port.
Sent from my SGH-T959 using xda premium
dhlalit11 said:
and what about uploading the error log from /cache/recovery
Click to expand...
Click to collapse
How do I extract it from root browser?
Posse magnet......
samsgun357 said:
How do I extract it from root browser?
Posse magnet......
Click to expand...
Click to collapse
Just go to that file, copy it and paste it into your SD or something, and then upload it from there.
Because I have flashed a new rom and kernel the recovery log doesn't have the abort/error info...
Posse magnet......

[ROM][ICS][DOWNLOAD]Project Official Lite ICS by SvTeam HAPPY NEW YEAR

Hello xda members! I've got a new ROM for you and this time its a lite ICS based on official by Huawei but A LOT smoother and faster!
Android Version 4.0.4
HAPPY NEW YEAR EVERYONE!!!!
Changelog:
Added graphics tweaks.
As smooth as this ROM can be.
Faster Wifi.
Removed unused apps.
New bootanimation.
Better Signal.
Better Battery.
Better camera/photo/audio quality.
Other performance tweaks.
Installation:
You have to be on OFFICIAL ICS for this to work!
Wipe cache.
Format/ factory reset.
Wipe cache.
Format system.
Install ROM.
Fix Permissions.
IN ORDER TO GET YOUR ROM TO WORK PROPERLY YOU MUST DOWNLOAD : http://www.mediafire.com/?uci2qcrie6lnian
They are some extra files that i removed from system/app in order to make the ROM smaller and upload it on mediafire. Just download them and either move them to system/app before installation or push the to system/app after installation and set permission using Root Explorer.
This rar file contains 2 folders:
1)Extras. These are files you may want to add to your ROM but they are NOT needed.
2)Needed. These are files that are NEEDED in order your ROM to work properly.
Downloads:
http://www.mediafire.com/?4872i1a91ycawd6
Thanks to
Huawei for base ICS
GADANA for base flashable zip
SvTeam
AND ALL XDA MEMBERS, AGAIN HAPPY NEW YEAR EVERYONE!!!
Great!
Waiting
I think that if you release stable 4.2 rom it is better that older ics rom...
Sent from my U8800Pro using xda premium
gleb_grid said:
I think that if you release stable 4.2 rom it is better that older ics rom...
Sent from my U8800Pro using xda premium
Click to expand...
Click to collapse
I already said that 4.2 WILL NOT get released,at least for now so no word about that.
I tried to install the rom and now the phone doesn't work anymore, I can't get into recovery, the image folder exists but does not go into recovery, you can know what happened? is this a joke?
baggino said:
I tried to install the rom and now the phone doesn't work anymore, I can't get into recovery, the image folder exists but does not go into recovery, you can know what happened? is this a joke?
Click to expand...
Click to collapse
Did you follow my instructions?
Followed the instructions and installed the rom, and now my phone stays at the Huawei logo for few seconds and reboots and I can't boot it to the recovery to install other roms...
E: I installed step 2 from b928 update and it's alive again
Bravo... Avto perimeno apo 5 mines
Bravo! This wait of 5 months.
Sent from my u8800pro using Tapatalk 2
dingila said:
Bravo... Avto perimeno apo 5 mines
Bravo! This wait of 5 months.
Sent from my u8800pro using Tapatalk 2
Click to expand...
Click to collapse
How are the results for you? Is it smooth enough? Could you provide some screenshots for the 1st post please?
Does it mean that the phone still be able to boot after flashing the rom(without needed files) from cwm but I have to move the needed files to system/app then to make it work properly?
Am I right?
JerSki said:
Followed the instructions and installed the rom, and now my phone stays at the Huawei logo for few seconds and reboots and I can't boot it to the recovery to install other roms...
E: I installed step 2 from b928 update and it's alive again
Click to expand...
Click to collapse
I did the same thing......
Tip: you're away from any rom of sigg. SvTeam, this is the second time the flashing their creature, but I'm sure it will be the last........
What is your purpose?
baggino said:
I did the same thing......
Tip: you're away from any rom of sigg. SvTeam, this is the second time the flashing their creature, but I'm sure it will be the last........
What is your purpose?
Click to expand...
Click to collapse
attention..
26decem said:
Does it mean that the phone still be able to boot after flashing the rom(without needed files) from cwm but I have to move the needed files to system/app then to make it work properly?
Am I right?
Click to expand...
Click to collapse
Yes i just removed some big files because of the 200mb limit on mediafire.
Rom doesn't work. Done everything written
SvTeam said:
Yes i just removed some big files because of the 200mb limit on mediafire.
Click to expand...
Click to collapse
have you tested?
26decem said:
have you tested?
Click to expand...
Click to collapse
Nope. We dont have a coder right now so all modifications were done by me to have a stable ICS. I took the zip that bronxitas made and added tweaks and removed files to make it faster and smoother. So i thought it would work because that zip was working fine.
SvTeam said:
Yes i just removed some big files because of the 200mb limit on mediafire.
Click to expand...
Click to collapse
Gadana wasn't even 200MB to begin with.
You can upload the rom in is entirity on another site like http://www.4shared.com/
ninfernix said:
Gadana wasn't even 200MB to begin with.
You can upload there in is entirity on another site like http://www.4shared.com/
Click to expand...
Click to collapse
This is the one I used as my base : http://prntscr.com/nslna
ErisLT said:
Rom doesn't work.
Click to expand...
Click to collapse
Xaxaxax... I don't speak anything... SvTeam, no comments about your super roms
Sent from my U8800Pro using xda premium
svteam is just a giant troll!!
His roms never worked, not a single one.
just ignore it

[GUIDE] How to port ROMs from u8800pro to u8800

How to port ROM
Overview
So this is guide "how to port roms from huawei u8800pro to u8800 or from u8800 to u8800pro". Both ROMs (base, port) must have same android version. And if you try this guide you'll port ROM for your device with same features! If you have some question or problem please PM me.
Click to expand...
Click to collapse
Tools
Winrar
Notepad++
Click to expand...
Click to collapse
Guide
What is base Rom:
The ROM which is Developed For your Mobile.. (like Aurora, CM7,...)
What is Port Rom:
The Rom Which you want to port to your Device... (like frozenpika,...)
1. So take any clean ROM which is running on your device as Base ROM.
2. Extract it Using Winrar.
3. Take the ROM you want to port. This Port ROM. Extract it also using Winrar.
4. Delete app, Framework, Fonts and Media folder in System Folder of Base ROM.
5. Now copy app, Framework, Fonts and Media folder in System Folder from Port rom to base rom system folder.
6. Now open etc folder in both the ROMs folder.
7. In etc folder of base ROM open permissions folder and copy all the permissions files in Port rom to your base ROM folder except platform and handheld_hardware and then open init.d Folder in Base ROM and Delete Every thing except banner and then copy all the files inside init.d folder of port ROM to Base ROM.
8. Now open buid.prop file using Notepad++ and make changes to these of Base Rom as you wish.
ro.build.id=
ro.build.display.id=
ro.build.date=
ro.modversion=
9. In build.prop file change these to same as Port Rom build.prop values.
ro.config.ringtone=
ro.config.notification_sound=
ro.config.alarm_alert=
10. COPY THE set_perm Lines in META-INF/com/google/android/updater-script From Port to Base ROM After Deleting set_perm lines in Base ROM's Updater-Script.
11. Last Step to .zip folders to one
SELECT META-INF, system and boot.img in port folder
Right Click and Select Add to Archive..
Select Zip..
Type the Name.
Click OK..
12. You can simple flash via recovery!
Click to expand...
Click to collapse
Is it backwards compatible too? Regular to pro?
Sent from my u8800-51
Somcom3X said:
Is it backwards compatible too? Regular to pro?
Sent from my u8800-51
Click to expand...
Click to collapse
Yes, of course. From the U8800 U8800pro and vice versa.
Have you ported any Roms from u8800 pro yourself. If so, please share with us
Sent from my U8800 using xda premium
vercetti19 said:
Have you ported any Roms from u8800 pro yourself. If so, please share with us
Sent from my U8800 using xda premium
Click to expand...
Click to collapse
Sorry. I'm very busy now with my ROM Mlora...
Maybe someone can try it!
11. Last Step to .zip folders to one
SELECT META-INF, system and boot.img in port folder
Right Click and Select Add to Archive..
Select Zip..
Type the Name.
Click OK..
Click to expand...
Click to collapse
Is this correct?
We made all these changes to base rom, edit build.prop and updater_script of BASE ROM, and then we must zip and flash the PORT ROM folder?
dancer_69 said:
Is this correct?
We made all these changes to base rom, edit build.prop and updater_script of BASE ROM, and then we must zip and flash the PORT ROM folder?
Click to expand...
Click to collapse
Yes. Thanks for correct.
Sent from my U8800 running AOSP 4.0.4
Firstly, this a copy of this thread http://forum.xda-developers.com/showthread.php?t=1908008
Secondly, it's wrong and inaccurate.
ezet said:
Firstly, this a copy of this thread http://forum.xda-developers.com/showthread.php?t=1908008
Secondly, it's wrong and inaccurate.
Click to expand...
Click to collapse
Firstly, This guide is for beginners developers which want start with development.
Secondly, it isn't wrong. I tried it.
Mlopik said:
Firstly, This guide is for beginners developers which want start with development.
Secondly, it isn't wrong. I tried it.
Click to expand...
Click to collapse
Which ROM did you port?
forumber2 said:
Which ROM did you port?
Click to expand...
Click to collapse
I tried port CM9 for u8800 but now I'm waiting for Blefish's CM10.1. He said (on his twitter) that he'll release first preview next week.
Mlopik said:
I tried port CM9 for u8800 but now I'm waiting for Blefish's CM10.1. He said (on his twitter) that he'll release first preview next week.
Click to expand...
Click to collapse
And It worked?
forumber2 said:
And It worked?
Click to expand...
Click to collapse
Yes. It worked but I formatted disk and I go back to Windows8. So ROM is removed.
Lets see if this works :fingers-crossed:
Somcom3X said:
Lets see if this works :fingers-crossed:
Click to expand...
Click to collapse
So? Did you try it?
TUPAC_RIP said:
So? Did you try it?
Click to expand...
Click to collapse
Cyan mobile has issues... Trying to fix.
Sent from my U8800-51 using xda premium
Somcom3X said:
Cyan mobile has issues... Trying to fix.
Sent from my U8800-51 using xda premium
Click to expand...
Click to collapse
Will you post it?
Mlopik said:
Will you post it?
Click to expand...
Click to collapse
Gotta fix the updater script
Sent from my U8800-51 using xda premium
Mlopik said:
Will you post it?
Click to expand...
Click to collapse
Mistake in script formatted SD card... Gotta start over...
Sent from my U8800-51 using xda premium
Mlopik said:
How to port ROM
Overview
Tools
Guide
What is base Rom:
The ROM which is Developed For your Mobile.. (like Aurora, CM7,...)
What is Port Rom:
The Rom Which you want to port to your Device... (like frozenpika,...)
Click to expand...
Click to collapse
tried to port paranoid android from galaxy s2 to u8800 but it is stuck in bootloop

Categories

Resources