hi,
i tried flash android 4.0 in my sony arc lt15i whith flash tool followed a guide on the site theandroidsoul,
at the end of prodecure i turn on my phone, compare "sony" brand and then compare a image whith in a trinagle and a little phone.
I con't press any button, and if i press the come back button my phone turn off.
I think i brik my phone, any one can help me?any suggest....flashing a kernel of a version of android precedent as a 3.2!
thx so much
4other said:
hi,
i tried flash android 4.0 in my sony arc lt15i whith flash tool followed a guide on the site theandroidsoul,
at the end of prodecure i turn on my phone, compare "sony" brand and then compare a image whith in a trinagle and a little phone.
I con't press any button, and if i press the come back button my phone turn off.
I think i brik my phone, any one can help me?any suggest....flashing a kernel of a version of android precedent as a 3.2!
thx so much
Click to expand...
Click to collapse
try to recover it with seus
Related
Hi people,
I have a mayor problem. I just fu*ked up my phone by installing WM6.
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me!
s200 off
and I have this problem. my phone is off by installing new spl
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me
To go in the boot loader screen you have to:
press & hold camera and commmanager button
press the softreset hole
release the commmanager button and keep hold the camera button until the 3 colours display appear
Byez
but wat can i do after i hav the 3 colour screen come out?
pls help..... i'm very nervous..... i don wanna waste my money coz i screw up my phone.,...
i'm now outstation... can go back to the service center within this 6 mth....
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
mrsurya2000 said:
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
Click to expand...
Click to collapse
Which rom upgrade software ?
de.schurk said:
Which rom upgrade software ?
Click to expand...
Click to collapse
http://www.romupdate.ru/ghjibdrblkz...rophet_220734_2207114_024721_QtekWWE_Ship.exe --> this software
don't worry, your device isn't bricked as long as you can run it in bootloader
check in WIKI if you have G3 or G4 Prophet
I'm the exact same situation.
And wiki didn't help so far...
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
namco said:
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
Click to expand...
Click to collapse
Bear with me on the dumb questions
It looks like I managed to re-install
Thank you for your help. I installed the rom dezzer advised (post 7 of this thread) and it worked fine. Does that mean tha NOW i can flash smart1 1.3's?
Yep. Turn off the phone, make it sync with activesync and run UPDATE_ROM.bat.
Then cross your fingers Kidding. It will surely work. Remember to hard-reset after the upgrade.
If anything goes wrong just reflash WM5 and hard-reset. Always hard-reset after ANY OS upgrade.
this is not a question,but sollution
i installed hard spl on x1,and the try to update with generic rom,and i stucked on 10%.when recovery was finish,nothing changed.10%again.i try with another rom,and it's installed to 100%,but x1 then keep on restarting.it's not even reach the main window,but stucked in 'sony ericsson'.if you have this issue,read tips below.
1. make x1 in bootloader mode (hold down volume down+power button)
2. hard reset your device
3. voila
xperia won't hard reset,if he won't be in bootloader mode first!!!and you need to instal at least one room to 100%.
rakec00 said:
this is not a question,but sollution
i installed hard spl on x1,and the try to update with generic rom,and i stucked on 10%.when recovery was finish,nothing changed.10%again.i try with another rom,and it's installed to 100%,but x1 then keep on restarting.it's not even reach the main window,but stucked in 'sony ericsson'.if you have this issue,read tips below.
1. make x1 in bootloader mode (hold down volume down+power button)
2. hard reset your device
3. voila
xperia won't hard reset,if he won't be in bootloader mode first!!!and you need to instal at least one room to 100%.
Click to expand...
Click to collapse
hi,
am having problem here. doing something wrong while flash rom & my x1 bricked. now bootloader shows no image. when turn on it stuck at sony logo.
how do i overcome this? please help.
me too..
just want to install the Energy Leo (this is my first time, n i've done the HARD-SPL before install the ROM)
did u mean that i should enter the bootloader mode n do the hard reset while in bootloader mode?
Thankyou very much!
sorry if my english is bad..
3rd party world..
fully bricked
Hi
After last power off Xperia X1 dont wake up at all
- no bootloader
- no hard reset
- no power up
- no any single spark of life
Is there some trick or JTAG to wake up the phone.
Thanks in advance.
charge the phone completely, enter bootloader using the camera button+power button, task29, then flash via RUU
task29 saved me after bricking my phone few days ago when my device disconnected during a rom installation... something i tried and hoped it worked then it did... RUU wont even install unless i task29 that heartbreaking moment
What is task29
Suhel28 said:
What is task29
Click to expand...
Click to collapse
its the miracle task
inheaven said:
its the miracle task
Click to expand...
Click to collapse
very funny can you please elaborate..
I would also like to know of this task of 29.
I'm screwing around allot on my phone and an accidental brick'ing would like to be un'bricked.
Help, help!!!!
Certainly when upgrade from WM03 to WM06, we all must go to the boot loader option to clean registry, disable KITL, clean storage...etc . However,poor me, I have an XDAII with broken record and camera button, so that I can not get in Boot Loader ( Press ResetButton and hold down CameraButton + RecordButton )
So could any one solve this problem?
many thank!!!!
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Arimbi said:
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Click to expand...
Click to collapse
yes, its because you'r flashing Radio only, if you are flashing WM5/WM6/WM6.1/WM6.5 you need to enter bootloader mode!
Me to have only record button not working
But i made it,open your phone open whole parts,now attach your battery with a rubber ring so phone can start,notice that white part which is situated near the camera which has four pines fix it with screw or until your phone boots, you need four hands either to enter in boot loader mode or hard reset.you should connect the circuit button with a metal/wire,first try that button you will see camera or record working apply same for your needs. out of that four points of button adjust three to connect toughether to activate.
hello my phone is dead only in the screen is the legend of sony ericsson and the computer does not detect i installed ginger bread dxv.12 but I wanted to go back to floyo v.30 but it does not work and get stuck.
somebody can help me to bring it back to life sorry for my english i used google translate
monchoman2000 said:
hello my phone is dead only in the screen is the legend of sony ericsson and the computer does not detect i installed ginger bread dxv.12 but I wanted to go back to floyo v.30 but it does not work and get stuck.
somebody can help me to bring it back to life sorry for my english i used google translate
Click to expand...
Click to collapse
Have you tried to enter xrecovery
sandy4everyone said:
Have you tried to enter xrecovery
Click to expand...
Click to collapse
how can i do this? because i can´t enter in the xrecovery
Read through the x8 q&a and general section, if you can access any recovery, xrecovery(repeatedly press back button at SE logo) or cwm(repeatedly tap screen at SE logo) then you can restore your phone, if not then use pc companion to repair your phone.
Flash a rom with flashtool u can google it or look for it in these forums. That way i fixed mine that was stuck at se logo without xrecovery like you.
First time i bricked my phone, after recovering from the shock xD, i used this guide: http://forum.xda-developers.com/showthread.php?p=12442257#post12442257
Its quite simple to follow, there were heavy files (280mb aprox) that for my internet connection was like 2 hours of download, but well, just follow the second part (flashtool one) and youll recover your phone!
Goodbye!
too poor ,please!
go home or school and study well it
heh heh
if you know Chinese,i may help you.
or you can add my qq 406324356,i am willing to help you.
Sorry,my english is more poor than you.heh heh.
thank you everybody my friend squallo can fixed with a flash tool
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Hellspawm said:
http://www.youtube.com/watch?v=MOxqEWaastA
http://www.youtube.com/watch?v=w-mZQmMFRxE
http://www.youtube.com/watch?v=jGFdXc49vl8
http://www.youtube.com/watch?v=GYhFfJO2qUI
on all this links u can see how i try to repair my phone without success even i use PC Companion, SEUS, or Flash Tool, more then that u can see how is behave my phone when is plugged to charger...i know is a way to repair but i`m not able to find it...anyone here can help me?
Thanks for your time to watch that clips and i wait for advices!
Click to expand...
Click to collapse
How you came to such a stage??? Have you tried to unlock the bootloader or was it a result of unsuccessful custom rom flashing.....
Please tell in detail about how your phone came to this stage...
well
i find ginger v7 at this link
http://androidforums.com/x8-all-things-root/298647-new-v7-rom-2-3-5-gingerxperia-rom-x8.html
and i try to install in my phone...i did the steps as he say there how to install...and after i got what u see ... before i tried with ginger v5 but i got like answer from mobile the archive is bad...i try with v6 and my mobile after he start to looping on Sony Ericsson logo...and to fix i download SEUS , i update my mobile and it works...but now is not working anymore...i see the led is flashing red color and i think maybe i`m out of battery..i plug to charger but for 30-45 minutes the led stays open green and after is becoming again red and is flashing...this is the story. I think u know when u install a new software in xrecovery after is finish u have the menu to reboot the phone after u choose install from SD card...now with this ginger he says is done but the menu was at last step to choose the backup from sd card...and i press 2 times back key to see the menu to reboot...i select reboot and the rest u see on that clips. Maybe the battery is burn and she don`t want to charge? and because i`m out of power i got this results?