Related
Can anyone please post the difference between Kyrillos 3.0 and Indroid 3.0???
I don't want to know which one is better as a matter of fact that personal opinions vary by personal needs.
Just want to know the key/major differences in both.
next2devil said:
Can anyone please post the difference between Kyrillos 3.0 and Indroid 3.0???
I don't want to know which one is better as a matter of fact that personal opinions vary by personal needs.
Just want to know the key/major differences in both.
Click to expand...
Click to collapse
Kyrillos looks like Gingerbread.
InDroid looks like Honeycomb.
What are the difference??
http://lmgtfy.com/?q=android+gingerbread+theme
http://lmgtfy.com/?q=android+honeycomb+theme
well another major difference is the the kernel where in indroid there is no pre given overclocked kernel which you have to flash later after flashing it
Kyrillos one has already inbuilt that.... and its JIT enabledd I suppose
Pretty much the same ...
Kyrillos is slightly faster from what i noticed ...
But isn't the quadrant score for indroid a little higher?
diminishdim said:
But isn't the quadrant score for indroid a little higher?
Click to expand...
Click to collapse
Yes because the partitions are ext2.. mine are ext4...
You can install both roms to compare...
Sent from my Awesome Galaxy 3
kyrillos13 said:
Yes because the partitions are ext2.. mine are ext4...
You can install both roms to
Click to expand...
Click to collapse
Oh..i am currently using the indroid rom,will flash yours too..I'd really like to try out overclocking the phone..
did you flash it? i want to try too but are there alot of bugs and is a overclock safe? doesn't my phone get overheat or explodes or something like that is it alot faster then indroid
werker123 said:
did you flash it? i want to try too but are there alot of bugs and is a overclock safe? doesn't my phone get overheat or explodes or something like that is it alot faster then indroid
Click to expand...
Click to collapse
What bugs did you find? Your phone doesnt heat up so much... 2 celsius over the normal i think.
I still didnt flash it, maybe tomorrow. but thanks for the information
hey i flashed the rom,super smooth and fast but i just cant get the mad team apps2sd work
i mean im following all the instructions,but still the internal storage is 192 mb, and the size of my sd card(8 gb) is now reduced to 6 gb...any inputs on this?
diminishdim said:
hey i flashed the rom,super smooth and fast but i just cant get the mad team apps2sd work
i mean im following all the instructions,but still the internal storage is 192 mb, and the size of my sd card(8 gb) is now reduced to 6 gb...any inputs on this?
Click to expand...
Click to collapse
It's work... If you look into Titanium Backup you'll see a new entry "SD Card (a2sd)" with your new partition
Sent from my GT-I5800 using XDA Premium App & Kyrillos' rom v3.3
diminishdim said:
Oh..i am currently using the indroid rom,will flash yours too..I'd really like to try out overclocking the phone..
Click to expand...
Click to collapse
How is indroid working. I am on froyo with Galaxy 3. Should I flash with indroid? Moreover would there be any problem in getting back to stock froyo, if required for warranty reasons
diminishdim said:
Oh..i am currently using the indroid rom,will flash yours too..I'd really like to try out overclocking the phone..
Click to expand...
Click to collapse
How id indroid working. i am on stock froyo. Should I flash with indroid? Is it possible to revert back to stock froyo for warranty purpose
Requesting a gingerbread based rom (i know galaxy3apollo deserves it &u can do it)
kyrillos13 said:
Yes because the partitions are ext2.. mine are ext4...
You can install both roms to compare...
Sent from my Awesome Galaxy 3
Click to expand...
Click to collapse
Dear Sir.
I request you to develope a gingerbread or cynogen based rom for galaxy3apollo (gt-i5801}.
If wildfire can get a gingerbread so should galaxy 3, but the official support for it is hopeless. So we got no choice but to arrange for it. Plz, consider such an initiative , I want to help but I'm a complete noob (hope u can understand)
Thank you
hey can anyone tell me how to install apps on memory card????plz my internal memory is very low...
Hello all, this is my first post and I have some queries. As we all know the new Samsung firmware JP2 has many bugs like Swype not working, Battery draining very fast etc. I want to know which is most stable ROM which doesn't have these problems.
I don't want to try any custom ROM because of overclocked processor as it will short it's life and void the warranty. I am thinking to flash the JPN ROM but though to get advice before doing anything. I hope it won't have any effect if I use European firmware as I am from India. I am currently using JP6.
I think you should be using Kyrillos' ROM. It's very stable.
Opt for a non-overclocked custom, you won't regret it If you really want to stay using stock roms, i'd suggest JPM/JPN.
Sent from my Lestatious 1.8.5 Galaxy
friend863 said:
Hello all, this is my first post and I have some queries. As we all know the new Samsung firmware JP2 has many bugs like Swype not working, Battery draining very fast etc. I want to know which is most stable ROM which doesn't have these problems.
I don't want to try any custom ROM because of overclocked processor as it will short it's life and void the warranty. I am thinking to flash the JPN ROM but though to get advice before doing anything. I hope it won't have any effect if I use European firmware as I am from India. I am currently using JP6.
Click to expand...
Click to collapse
Try the new European release....XWJPF. Its a very stable rom. And no bugs. I am from india too. Its working flawless on my galaxy 3.
DDJG6>DDJP2>Kryillos 4.1>XWJPF
Using Kitchen v1.0 to create a new ROM with your feature do you want.
More details
http://forum.xda-developers.com/showthread.php?t=1058699
Click to expand...
Click to collapse
I'm testing it. Let's go with me.
customs are a balance and trade off
well stock ROM may be the most stable but from my experience of experimentations with different roms, and i've tried many roms, if you are thinking of intalling many applications then stock roms are just useless as you would get blank/black screens too often in the stock Tw launcher as the applications try to load from SD card, where you will have to install them for want of space. so if you want to try lot of applications you will have to go for a custom rom with ext2/ext4 support. after trying many custom roms i've finally stopped at POX v 1.0 non oc. Its silky smooth and thats after installation of more than 43 third party apps/games, though you will have to live with some minor glitches which you wont mind. Yes stay away from OC versions as they drain your battery and freeze your phone. The hardware (processor) structure if galaxy3 if not designed for overclocking though it may be overclocked.
XWJPF + go launcher ex
perfect combination..no lags blazingly fast
(oh yes i,ve also rooted my phone and have set cpu.. , so maybe thats y..still XWJPF...no problems)
i have JPM and thinking of moving to XWJPN.
how is it that JPM is pre-rooted if it is official samsung firmware?
I think you should be using Kyrillos' ROM too. It's very stable.
Samsung engineers aren't idiots or fools.. JP2 is d most stable ROM for this phone. I have used custom roms and trust me..there ain't any ROM more stable.
Sent from my GT-I5801 using XDA Premium App
dexter8088 said:
Samsung engineers aren't idiots or fools.. JP2 is d most stable ROM for this phone. I have used custom roms and trust me..there ain't any ROM more stable.
Sent from my GT-I5801 using XDA Premium App
Click to expand...
Click to collapse
Then i think you should try using the latest European firmware, XWJPF. Its far better than DDJP2. Trust me.
Lol JP2 has many bugs including battery draining issue. How come it is more stable?
Confused between multiple opinions. Might add a poll soon.
If you were to use custom roms, use the Non oc version by Kyrillos. From all the roms that i have tried (there have been many), i have found Kyrillos to be the best.
If you were to use regular Firmwares, the best i believe is either JPF or JPM. A lot of them out there still support JPF, while the constant flashers would recommend the JPM
BTW...Kyrillos is based on JPM
XXJPM by Kyrillos, safe flash and very stable
No worries, I think I have the perfect solution for you... In a few minutes I'll be posting my ROM, which is exactly what you need - because I made this ROM for I had the same problems as you!
Also, I'm writing this, coz I want to post it in the development section but I need 10 posts for that...
There are a lot of ROMs and as far as I see, you should try more then one, because everybody likes a different version...
Yeah, so here I am again. Uploaded, you might even try it - see if the problems go away!
http://forum.xda-developers.com/showthread.php?t=1079052
Now don't mind using any custom ROM if it is stable and good to use.
Poll added just to solve some confusion between multiple choices.
InDroid
InDroid v4 looks good n is going to be released soon
i would prefer non OC as it is more stable but u can look for OC as well!
Allthough I use my own custom ROM, I vote for Kyrillos's ROM because it's very stable and fast. I use it for a long period and I was very pleased.
Kyrillos ROM is not only stable, but gives you the choise of OC or Non OC capability!
Hi!
Im thinking about install a new rom to my phone but cant decide which...
I want a rom with so small bugs thats possible but still some features that makes the phone better
I installed this Clockwork Recovery for a pretty long time ago and dont remember what it do
http://forum.xda-developers.com/showthread.php?t=1044585
So I wounder if I need it or just can remove it?
And if I gonna install a new rom, which Recovery is the best at the moment?
Would be very thankfull if somone with more experience could tell me their opinion!
My prefer is void. (2.2.2; #eridanus) by Noejn.
Install Perfect Recovery 4.0.0.5 and try yourself all ROMS.
Sent from my u8800 using XDA App
Okey will try that rom and recovery
But if im not happy with the rom can I then change back to the orginal?
IF you take a backup with recovery yes,!
Sent from my u8800 using XDA App
At the moment definitely VOID 2.2.2 latest
What makes void so great? Dec got rid if his phone so no more updates. Might as well use something that'll get new fw updates..
I believe that Oxygen is the best Rom at the moment. Miui is very good as well, but with Oxygen battery life is amazing (more than 40h, with wifi and BT on all the time) and it's got most things sorted.
katu2006 said:
I believe that Oxygen is the best Rom at the moment. Miui is very good as well, but with Oxygen battery life is amazing (more than 40h, with wifi and BT on all the time) and it's got most things sorted.
Click to expand...
Click to collapse
actually Oxygen drains more battery than geno's CM7 beta....
magictwins said:
actually Oxygen drains more battery than geno's CM7 beta....
Click to expand...
Click to collapse
It maybe so, but at least camera is fully functional.
So, which ROM would you suggest overall? Fully fuctional, acceptable battery life, speed etc. I'm with B137 v8.2 and I feel I need something new.
FYI, I usually clock the cpu to 1Ghz or 1,2Ghz.
then go for the v8.4 & his new kernel
http://bbs.goapk.com/thread-3177723-1-1.html
http://bbs.goapk.com/thread-3423090-1-1.html
this is the most stable rom atm with good performance. other roms are faster but some things dont work or they are not stable.
your choice.
iakoboss7 said:
then go for the v8.4 & his new kernel
http://bbs.goapk.com/thread-3177723-1-1.html
http://bbs.goapk.com/thread-3423090-1-1.html
this is the most stable rom atm with good performance. other roms are faster but some things dont work or they are not stable.
your choice.
Click to expand...
Click to collapse
Thank you re iakoboss7!!!
Alexcxvtr said:
Thank you re iakoboss7!!!
Click to expand...
Click to collapse
how do you know that is. good Rom. did you tested it already? so is a room like void with Android 2. 2. 2
i use this rom for almost 2 months now. from v7 i think.
i never ever had a fc reboot etc (except 1 time i had the cpu at 1.5ghz).
everything is working fine, the only small problem lies in the modified franco kernel genokolar used (he modified it to be even more stable),
it has some problems on charging (franco's kernel had them also as i have read, i dont know if its fixed on his newest version cause the modified one is 1 version older than 20 july one).
(u can avoid that problem the kernel creates by not flashing the kernel and keeping v8.4 kernel).
here is a link that i have uploaded both 3
http://www.megaupload.com/?d=V99GYVBN
dont forget to install superuser from market or root will not work without it (as everywhere else also).
for the ones that want performance its not the best out there but its still a good one.
i get 24xx at quadrant at 1.3ghz when this void user gets the same at 1.5ghz but i get lower on antutu (3018, made a 2nd run and scored 3167 if it matters) propably cause of the 0.2gz less cpu speed http://forum.xda-developers.com/showpost.php?p=15978575&postcount=326
but this oxygen user gets allot more than me on 1.3ghz http://forum.xda-developers.com/showpost.php?p=16303582&postcount=391
(i have also 1.2gb worth of apps installed if this matters)
the good thing this rom has is stability and everything works, from what i read most other roms have things not working, bugs and not that great stability, miui is a VERY good rom also (has its small bugs) cause its based on 2.3.5 but i dont like miui style ^^ (personal opinion).
oh i forgot to mention that its totally stock (except 1 small app with reboot,shutdown etc options).
i made some changes please re-read my answer
iakoboss7 said:
the good thing this rom has is stability and everything works, from what i read most other roms have things not working, bugs and not that great stability, miui is a VERY good rom also (has its small bugs) cause its based on 2.3.5 but i dont like miui style ^^ (personal opinion).
oh i forgot to mention that its totally stock (except 1 small app with reboot,shutdown etc options).
i made some changes please re-read my answer
Click to expand...
Click to collapse
bro, thanks for ur info.
btw, my ideos is u8800H, is it compatible also? and i had flash with muui1.7.3 (android2.3), is it can flash back? ( use recovery tools to flash?)
thanks for help.
yeah its for the u8800H also as i can remember. you can keep a backup and if you dont like you can go back anytime...
oh and flash works just fine, i dont see any reason not working.
there is a new miui version that came out before an hour, try it first cause you maybe like it better (since i see you already have miui).
iakoboss7 said:
i use this rom for almost 2 months now. from v7 i think.
i never ever had a fc reboot etc (except 1 time i had the cpu at 1.5ghz).
.
.
the good thing this rom has is stability and everything works, from what i read most other roms have things not working, bugs and not that great stability, miui is a VERY good rom also (has its small bugs) cause its based on 2.3.5 but i dont like miui style ^^ (personal opinion).
oh i forgot to mention that its totally stock (except 1 small app with reboot,shutdown etc options).
i made some changes please re-read my answer
Click to expand...
Click to collapse
Thank you very much. I have flashed your uploaded three files and would like to confirm that this v8.4 is the best ROM for u8800 nowadays. BTW, since the original ROM is from China, I do hope to have your help to keep update this ROM whenever there is a new version or any changes.
no problem, i can keep you updated, at least until Genokolar decides to put his work here.
tried the v8.4 from Genokolar on my UK Huawei U8800 and it didn't work kept looping at the start screen, so I went back to using the FLB Custom ROM
So if i upgrade my blade stable cm 7.1 to nightly 256 do i lose my apps and other things like that (settings). If yes then is there any way to update with out losing any data.
Thank you for help
its best to use titanium backup and backup all of the data you need. you can then upgrade and restore the apps which you had that is the best method i can think of mate
And I wouldnt recommend you to update to cm7 if you really dont need the extra features. Wbaws Ginger SF rom got better battery life (~2x for me) and is way faster/smoother.
lokaltrafik said:
And I wouldnt recommend you to update to cm7 if you really dont need the extra features. Wbaws Ginger SF rom got better battery life (~2x for me) and is way faster/smoother.
Click to expand...
Click to collapse
Well i have SetCPU that underclock cpu to 320mhz when it is in sleep mode and i need softkeys.
for cm7 to cm7, you can flash on the old one...
but it's more proper to reinstall everything..
I use burstlam odex version and it the smoother rom i ever tested
i tried fish'n'chip, gsf, blademix360, cm7...
So i am on this forum for a long time now i tested every rom and kernel with games and how they work and all but now i need your help currently i am on stock rom and i am sick of it because it is slow and my internal memory is 150/190 mb used... i stopped playing games and i am now looking for fastest rom that won't bug,and i need it for messages and music player so do you have any opinion on what should i use cm7 ? kyrillos ? or there is something better ? faster ? easier to use?
ty to all that help me
Kyorarom would help in opening apps faster as you can use kyora app to lock apps in memory so they open faster. I recommend kyorarom too for its tweaks and theme. Its really up to you
Cheers
Sent from my i9003 powered by Cyanogenmod 7
Ok, let me summarize a bit... I was planning on making a guide for my setup for all those who want update but are a bit skeptic towards custom ROMs.
Let's get started...
Firstly, I have to state that I tried almost every ROM out there and Kyorarom, personally left biggest impact on me considering speed...
BUT, few days ago, I had some crazy picture in my head which was saying that modding one part of ROM crashes whole integrity of that ROM. So I was thinking that probably the best solution would be putting stock ROM and changing kernel only.
So, what did I do?
I decided to try to update ROM to original Froyo supplied from my provider (T-mobile Croatia)
1.) I flashed complete eclair...
2.) Failed to update to Froyo via Kies (who would say...)
- when Kies downloads a ROM it stores it to temp folder. As it didn't want to update from Kies, I took the same ROM and flashed it through ODIN
3.) As that worked perfectly, I had clean XXJPQ (So far the best one I got...) and decided to put a root as I faced some problems before while flashing kernels which should grant me a root...
4.) After I got root, it came to me that I just have to choose right kernel. I decided to go for fugumod. In this case, I took fugumod 2.4 800 Mhz (Cpu setup - 333.5 / 800 Mhz, governor performance)
Right now, you have a ultra mega fast ROM with incredible battery life. (Using ROM whole day with data and wifi + some music got it down to 85% from fully charged)
After that all I did was put 5LS mod and extended power menu...
I'm using Nemus Launcher which has left the smoothest impact on me and the most satisfying options provided for customizing...
If you have any questions, feel free to ask.
EDIT:
As there wasn't recovery, and with that no backup option, I had feeling like it's really needed. Fugumod didn't serve any kind of recovery and I haven't found any kind of standalone install for CWM, it was time for me to change kernel. Candidates were kyorakernel (hillbeast) and astrum (moikop). As I tried kyorakernel before and it is based on fugumod and g3mod I decided to go for astrum which is based on samsung.
Results:
It showed great results for now. RZ Recovery packed with kernel is really great. Simple to use, has better interface...
Kernel also gives possibility to use Data2SD (hybrid) and OC to 1ghz (I preffer myself 800 mhz with lagfree governor)
Also, as it simply wasn't enough for me, I decided to go for CMbins 0.3.1 made by hillbeast.
OFC, it gave great boost to the phone...
I was thinking that there isn't much possibility to make it any better but once again I proved myself wrong...
that's a great idea though fugumod is a bit outdated.
any idea on how to enable hd2sd on that? otherwise i ll wait for hillbeast or moikop to iron the bugs on theirs...
tomsi191 said:
that's a great idea though fugumod is a bit outdated.
any idea on how to enable hd2sd on that? otherwise i ll wait for hillbeast or moikop to iron the bugs on theirs...
Click to expand...
Click to collapse
No idea, sorry... To be honest I'm waiting for kyorakernel or astrum kernel too. Fugumod is solution because it's the best kernel for now, even outdated...
s'funny, i was thinking about this yesterday, i'm having problems with a gps app, dev thinks its because of custom rom. that got me to thinking about smonic (member) who is/was using stock jpu.
i was wondering if you could flash stock jpu, then g3mod 2.2.2 as kernel? then you would have cwm, extended power memory etc.
sd carc partition would also work?? (methinks? i have a lot of apps, and i use pretty much all of them!)
is this scenario viable????
pretty much a noob at these matters, i get it all, but i dont!!
Skivit said:
s'funny, i was thinking about this yesterday, i'm having problems with a gps app, dev thinks its because of custom rom. that got me to thinking about smonic (member) who is/was using stock jpu.
i was wondering if you could flash stock jpu, then g3mod 2.2.2 as kernel? then you would have cwm, extended power memory etc.
sd carc partition would also work?? (methinks? i have a lot of apps, and i use pretty much all of them!)
is this scenario viable????
pretty much a noob at these matters, i get it all, but i dont!!
Click to expand...
Click to collapse
Of course it's viable I'm advising everyone to flash eclair and take froyo supplied from your provider via kies
problem there was i flashed froyo because my provider wanted me to hand in phone and have it sent off to be updated, taking 2 weeks...
thats why i began on the slippery slope to flashing and rooting
but flashing stock jpu from the list somewhere on this site should work too? or not?
edit- maybe we should start this as a new thread, kinda hijacked this one....not intended @shadowmaniac.
Skivit said:
problem there was i flashed froyo because my provider wanted me to hand in phone and have it sent off to be updated, taking 2 weeks...
thats why i began on the slippery slope to flashing and rooting
but flashing stock jpu from the list somewhere on this site should work too? or not?
edit- maybe we should start this as a new thread, kinda hijacked this one....not intended @shadowmaniac.
Click to expand...
Click to collapse
Go to sammobile.com and find the firmware you want
Cheers
Sent from my i9003 powered by Cyanogenmod 7
Skivit said:
problem there was i flashed froyo because my provider wanted me to hand in phone and have it sent off to be updated, taking 2 weeks...
thats why i began on the slippery slope to flashing and rooting
but flashing stock jpu from the list somewhere on this site should work too? or not?
edit- maybe we should start this as a new thread, kinda hijacked this one....not intended @shadowmaniac.
Click to expand...
Click to collapse
If kies detects your phone you should be on your way to update. It probably wouldn't want to update it but will download ROM in temp folder. You can take it from there and flash via odin.