Database Users

White Screen after running out of battery and no chance to enter bootloader

Hello I've got an Tmobile Ameo wich is a brand of the HTC Athena with an Olipro SPL copyed on it with the Athena Unlocker by Olipro.
Today I've copy much Data on my Microdrive useing my Windows Xp PC and the Programm WM5torage. I did this serveral times before and it works everytime smooth.
But today my Battary went out of power while this copyprocess and I didn't recognize it because the Athena was turned to Silent.
So my Display went of.
So I changed the Akku but when I pulled out the empty one my Athena show a very strang just white Screen.
I put the new full Battary in and tryed to launch.
But if I drop down the power key just the light of the "OK" and "Windows" Buttons goes on. If I press the powerbutton agein they went off again. There is nothing on the screen.
If I try to Hardreset the device then there happens nothing instead of the Actionkey light went green and off again.
But one time I tryed to enter hardreset mode I first saw the Screen with the different Colors from the Bootloadermode but then a verf similar screen but just with a blue color and colors between grey and white.
After this I recognized that If I touch some places of the device the Display turns on but only white and after a time off agein.
This is very strange because nothing mechanical happent to the athena.
Entering Bootloader Mode ends in the white screen too without success.
What should I do?
Edit:
I just recognized that my Windows Mobile is still running.
If I press the Voice Button there are 2 beeps and if I say a name he also repeats.
So it must be just a display problem but I dont understand because the display still works.
Edit2:
Next Thing if I press a bit on the back of the device, the screen is normal again but after sometime there comes grey lines and then it goes fully white very slowly.

AgentBignose said:
Hello I've got an Tmobile Ameo wich is a brand of the HTC Athena with an Olipro SPL copyed on it with the Athena Unlocker by Olipro.
Today I've copy much Data on my Microdrive useing my Windows Xp PC and the Programm WM5torage. I did this serveral times before and it works everytime smooth.
But today my Battary went out of power while this copyprocess and I didn't recognize it because the Athena was turned to Silent.
So my Display went of.
So I changed the Akku but when I pulled out the empty one my Athena show a very strang just white Screen.
I put the new full Battary in and tryed to launch.
But if I drop down the power key just the light of the "OK" and "Windows" Buttons goes on. If I press the powerbutton agein they went off again. There is nothing on the screen.
If I try to Hardreset the device then there happens nothing instead of the Actionkey light went green and off again.
But one time I tryed to enter hardreset mode I first saw the Screen with the different Colors from the Bootloadermode but then a verf similar screen but just with a blue color and colors between grey and white.
After this I recognized that If I touch some places of the device the Display turns on but only white and after a time off agein.
This is very strange because nothing mechanical happent to the athena.
Entering Bootloader Mode ends in the white screen too without success.
What should I do?
Edit:
I just recognized that my Windows Mobile is still running.
If I press the Voice Button there are 2 beeps and if I say a name he also repeats.
So it must be just a display problem but I dont understand because the display still works.
Edit2:
Next Thing if I press a bit on the back of the device, the screen is normal again but after sometime there comes grey lines and then it goes fully white very slowly.
Click to expand...
Click to collapse
It seems to be broken.Go to service.

Tadeusz said:
It seems to be broken.Go to service.
Click to expand...
Click to collapse
Yes I also think so.
Do you know how long it takes to let an Athena Repair?

[Q] Boot up screen

I installed Euro firmware, on the second flash everything just stay'ed black, and I waited awhile till I decided to power off then power back on. First thing I saw was AT&T connect boot screen, then it went black but I can still hear Samsung's power up theme, also device has a Vertical Line running down the right side. I noticed that If I press power button twice Tab comes on, and everything looks great, so I rooted my device and installed Titanium Backup,Everything seems okay. So my question is how do I get rid of the AT&T Boot logo and to be able to see Samsung logo on boot?
\\\\\\\Exactly what happens on fresh boot/////
-fresh boot- AT&T Connected screen comes up, then screen goes black with the line on the right, then Samsung's power up theme song comes on buttons light up screen stays black line goes away, then screen still black, then to initialize the screen I press power button twice. Comes on and works fine.
****Would love to fix that part, I would be most greatfull for life! Willing to pass on info, to all who want more!****

*need help on pre-installed boot screen*
I installed Euro firmware, on the second flash everything just stay'ed black, and I waited awhile till I decided to power off then power back on. First thing I saw was AT&T connect boot screen, then it went black but I can still hear Samsung's power up theme, also device has a Vertical Line running down the right side. I noticed that If I press power button twice Tab comes on, and everything looks great, so I rooted my device and installed Titanium Backup,Everything seems okay. So my question is how do I get rid of the AT&T Boot logo and to be able to see Samsung logo on boot?
\\\\\\\Exactly what happens on fresh boot/////
-fresh boot- AT&T Connected screen comes up, then screen goes black with the line on the right, then Samsung's power up theme song comes on buttons light up screen stays black line goes away, then screen still black, then to initialize the screen I press power button twice. Comes on and works fine.
****Would love to fix that part, I would be most greatfull for life! Willing to pass on info, to all who want more!****

Install euro firmware with bootloaders. JJ4 is good one since it's bootloader is not signed. Then you can install newer euro firmware over it.
However, so far there is no known way to go back to AT&T bootloaders. So you ca't fully restore to AT&T if needed.
Sent from my GT-P1000 using XDA App

Thanks
Thank you for your reply, I will think about it! Seem's I have to make a choice. But at least there is a way to fix the problem.
Thanks!!!!!!!!!!!!!!

I got a samsung vibrant Tmobile and after flashing a custom Rom
I got AT&T bootup screen! Any answer will be appreciate !

There is a thread for this titled "How to fix at&t black screen with thin white line at boot up". I know you can find it by searching - I wrote it.

[Q] is my phone fudged?

I think my phone might be fudged. I have been running android fine for the last few weeks until it crashed, I removed the battery to reset but the phone wouldn’t turn back on. However I could boot to the tri-color screen so I tried putting windows 6.5 back on the phone, the installation finished but the phone still wouldn’t boot the OS. I can still get the tri-color screen and have tried re-installing the radio/magdlr but they stick on 0%. Also my battery at best probably has 20-30% of juice left (it won’t charge either).
Anyone know what the cause of the problem is and if there is a way it can be fixed?
thanks in advance!

harrybob_17 said:
I think my phone might be fudged. I have been running android fine for the last few weeks until it crashed, I removed the battery to reset but the phone wouldn’t turn back on. However I could boot to the tri-color screen so I tried putting windows 6.5 back on the phone, the installation finished but the phone still wouldn’t boot the OS. I can still get the tri-color screen and have tried re-installing the radio/magdlr but they stick on 0%. Also my battery at best probably has 20-30% of juice left (it won’t charge either).
Anyone know what the cause of the problem is and if there is a way it can be fixed?
thanks in advance!
Click to expand...
Click to collapse
Try doing a Task29 then flash a compatible Radio then flash MAGLDR.. and lets see what happens

You will need to charge your battery. If it dies during a flash then you will have an even bigger problem to sort out.
If its less than 50% this is probably why its sticking at 0%.
Is your HSPL still intact and which radio are you using?
Sent From My Fingers To Your Face.....

conantroutman said:
You will need to charge your battery. If it dies during a flash then you will have an even bigger problem to sort out.
If its less than 50% this is probably why its sticking at 0%.
Is your HSPL still intact and which radio are you using?
Sent From My Fingers To Your Face.....
Click to expand...
Click to collapse
lower than 50% doesn't really matter from the bootloader, only RUU.
It sounds like hardware problem, or something fishy going on in NAND, I'd do task29 followed by ROM/Radio

thanks for the responses. I still have hspl, I manged to successfully install task 29 after that I tried flashing a windows 6.5 rom, once again phone won't start up after 100% all i can do is get to the 4 colored screen.
is there anything else I can try? considering my battery must be really low and I have no way of charging it.

harrybob_17 said:
thanks for the responses. I still have hspl, I manged to successfully install task 29 after that I tried flashing a windows 6.5 rom, once again phone won't start up after 100% all i can do is get to the 4 colored screen.
is there anything else I can try? considering my battery must be really low and I have no way of charging it.
Click to expand...
Click to collapse
Buy a cheap external charger off ebay.

harrybob_17 said:
thanks for the responses. I still have hspl, I manged to successfully install task 29 after that I tried flashing a windows 6.5 rom, once again phone won't start up after 100% all i can do is get to the 4 colored screen.
is there anything else I can try? considering my battery must be really low and I have no way of charging it.
Click to expand...
Click to collapse
If you got 100% when you flashed the Windows Mobile ROM and your HD2 rebooted itself, then you sucessfuly flashed the ROM.
Did it boot up to the bootloader or the first splash screen (Stick Together or white HTC screen depending on which HD2 you have)?
If it booted to the first splashscreen it could be the processor having troubles or possible bad blocked incthe NAND memory.
If it boots straight to bootloader then you have a bad NAND memory.

It doesn't reboot to either screen, it simply turns off after the rom is finished installing and doesn't start back up again. The only thing I can do is press volume down and red button to boot the 4 colored screen. When I press the power button all that happens is the phone sometimes makes a tiny vibration.

harrybob_17 said:
It doesn't reboot to either screen, it simply turns off after the rom is finished installing and doesn't start back up again. The only thing I can do is press volume down and red button to boot the 4 colored screen. When I press the power button all that happens is the phone sometimes makes a tiny vibration.
Click to expand...
Click to collapse
Yeah sounds like you probably have a internal problem with hardware. But it might could because software related issue, but I highly doubt it. The only software problem you could have that I can think of is a problem with your SPL or HSPL which ever one you have, but you should have HSPL cause you where running Android.

Would a corrupt bootsplash do this?
Sent from my HD2 using XDA Windows Phone 7 App

hakuchi18v said:
Would a corrupt bootsplash do this?
Sent from my HD2 using XDA Windows Phone 7 App
Click to expand...
Click to collapse
If you are asking if a currupt splash screen could cause your issue, I would have to say it could be possible, but I do not know enough to say for sure, sorry. You can put this to a test though and flash another splash screen, but the ROM should have flashed a splash screen. Maybe the splash screen it flashed was currupted or had a bad flash. Go to this link to get a splash screen and learn how to flash one.

I've said this a lot in other threads, but create a gold card SD. This will allow you to flash ALL the necessary components from the SD card. Then report back with your experience...

[Q] HTC HD2 ROM install problem

Hi, I want to reinstall a new ROM firmware on my HD2 as its constantly crashing and now its getting stuck on the htc white welcome screen, the one which comes up immediately as you switch on the phone. The problem is that I cant use the phone and therefore cant connect the phone to the pc with active sync as its not loading up.
I have tried pressing the red button at the back and also doing a reset by pressing the vol up and down and the on button, where it resets successfully but when it tries to boot up it gets stuck again! ;S
Can someone help me pls?
Thanks

mat181314 said:
cant connect the phone to the pc with active sync
Click to expand...
Click to collapse
the insruction to connect to activesync is rubbish, and doesnt really mean activesync teh program.
power off
hold and keep holding vol-down
tap and release power
when stripey screen appears release vol-down
connect usb cable
wait for 'serial' to become 'usb' on white part of stripey screen
ready to flash.

White Screen of Death and some other problems..

Hi Guys,
I've got a Problem..
When I want to turn on my HD2, it vibrates and stucks on the first white Screen with the green HTC.
When I turn my phone on holding the volume down button, the tri color screen appears, but when I plug the phone to the PC, it turns black and nothing happens.
Could you help me?
Sry for my bad english
Greetings

Meinsss said:
Hi Guys,
I've got a Problem..
When I want to turn on my HD2, it vibrates and stucks on the first white Screen with the green HTC.
When I turn my phone on holding the volume down button, the tri color screen appears, but when I plug the phone to the PC, it turns black and nothing happens.
Could you help me?
Sry for my bad english
Greetings
Click to expand...
Click to collapse
Can you tell me if you install anything on the phone? like a hspl , clk or magdlr?
And when your phone is off and plugged to the pc doesnt the battery load?

Odp: White Screen of Death and some other problems..
You might want to try installing WM from SD, without connecting the phone to your PC. You do need an SD card reader though.
HD2 still the king! + Paranoid JellyBean with Tapatalk

Johrans said:
Can you tell me if you install anything on the phone? like a hspl , clk or magdlr?
And when your phone is off and plugged to the pc doesnt the battery load?
Click to expand...
Click to collapse
I've got the right Radio and HSPL (2.08), my HD2 runs around 1 year without problems with MAGDLR; in this time I flashed it a couple of times, without problems.
When it's plugged to the PC it's doing nothing, no LED is turning on or vibrate, so I don't know if it's loading.
Spaqin said:
You might want to try installing WM from SD, without connecting the phone to your PC. You do need an SD card reader though.
HD2 still the king! + Paranoid JellyBean with Tapatalk
Click to expand...
Click to collapse
Yes, I try it right now, thanks
EDIT: Tried it, and it doesn't work. It won't show the "Loading..." Screen.

Please help me :crying: