I've had a look on various forums incl here, and using Airdroid I can access all areas of my phone, but I'm dammed if I can see where the stock wallpapers are stored on it, can someone tell me the definitive file location so I can grab & snag please.
Phone is unlocked and not carrier specific
Sys ver 45.0.2310.MB526.Retail.en.GB
Built in wallpapers are inside framework-res.apk,
you'll have to decompile it to get the wallpapers.
Sent from my MB525 using xda app-developers app
I'll check now, hopefully the Defy plus will be the same.
Fraid not, I've decompiled and looked in every single directory at every single file (there's a lot) no wallpapers though
Anyone else know ?
Can you post ur framework-res.apk?
Ill take a look at it
Sent from my MB525 using xda app-developers app
Moved to Q&A. Please ask all questions there.
Sent from my HTC Glacier using xda premium
hsrars-d said:
Can you post ur framework-res.apk?
Ill take a look at it
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Ok I have got it from System/System/Framework/framework-res.apk
Hope it's the right file
Any luck ?
I too am after the stock wallpapers for the Defy+ so I downloaded the framework-res.apk file and only found 1 that matched what was on my phone. I've attached the one that matched (green bubbles) plus 2 other files that were contained in the various folders.
Ended up downloading the full rom for the Defy+ MB256 and found the wallpapers contained in the BlurHome.apk file. Also extracted and saved them into a .rar file as well.
Download - BlurHome.apk
Download - Motorola Defy+ MB256 Default Wallpapers.rar
http://d-h.st/sWY
http://d-h.st/sWY
Motorola Defy+ stock wallpapers
Please can you upload that wallpaper 00118.jpg for me,i tryed really hard to get this after i upgraded to CM10 Nightly.
And i can not download your rar-file,the link don´t work for it.
/royne
Related
How do we port gingerblur since its a backup?
Sent from my MB525 using XDA App
Use CWM and install it as a naindroid backup. Still have to wipe and such. Put the zip file somewhere on your computer and unzip it. Then it goes into clockwork on your sdcard and in the folder backup. The folder you want if you look closley at it is really a date. that's what goes into the folder backup. Then install it like you were going back and installing a backup. Need more help just ask.
Is that OK for the defy rom?
Sent from my MB525 using XDA App
To my knowledge it's not a Defy rom but one for Bravo. It may work on Defy but I don't know if it will or not. I don't even know where the actual rom is that the backup came from. I did try it for about three days but I didn't really click with it. A little too.......underdeveloped?...no....Just too basic for me. I like to mod, and mod, and mod some more. I can't do modding with this one the way I like to. Always have to do a CWM update to mod since I don't have it as a real rom. That help you out any? There's got to be some kind of program or an app that'll take nandroid backups and make them into rom but I woulden't even try to run them on my slooooow a$$ computer.
Well there is a ginger blur ROM in the defy section and I wanted to use it on my bravo but it's a nandroid.
Sent from my MB525 using XDA App
Use my gingerblur for bravo and replace frame work and app files
With new files
Sent from my SAMSUNG-SGH-I777 using xda premium
What program do I use to edit the backup
Sent from my MB525 using XDA App
Unyaffs
Sent from my SAMSUNG-SGH-I777 using xda premium
can you guide me on how to use it?
Sent from my MB525 using XDA App
Download unyaffs
Put in any folder on windows computer
Then put system.img in same folder
Turn on windows control prompt
Change directory to folder unyaffs is in. (if you check the properties of any file you will see the path to change it to...you can even copy and paste into terminal)
cd \paste path
Then type
unyaffs system.img
Sent from my SAMSUNG-SGH-I777 using xda premium
It's saying unyaffs is not recognized as an internal or external command, operable or batch file
Sent from my MB525 using XDA App
Nevermind I got it. But how do you make the image file
Sent from my MB525 using XDA App
You don't. You use my rom zip and replace files I said in previous post
Sent from my SAMSUNG-SGH-I777 using xda premium
I got stuck at the m logo
Sent from my MB520 using XDA App
I got the ms2ginger 2.1 to load and everything is good except when I try to change files for the camera to work it gets stuck at the m logo. Not sure why though... but other than that the rom is amazing. If anybody can help me get the camera at least partially working please do.
Sent from my MB525 using XDA App
Can someone upload the stock Blur music apk to dropbox or something for me? I've tried looking through the Nottachtrix zip file for it but it isn't in there and the links for the fruitcakes are down. It would be much appreciated.
Sent from my MB860 using XDA
http://dl.dropbox.com/u/26726034/Music.apk
There u go and next time post in proper section. This request should be posted in Atrix 4G Themes and Apps section.
P.S: I extracted this apk from bell stock gobstoper so try this and enjoy.
Thanks I will post there next time. I just didn't think of it at the time.
Sent from my MB860 using XDA
I'm looking for a percentage mod for latest P6810 official rom.
Anybody can help to teach me how can i do it, or give me a link for an easy how-to-guide?
EDIT:
Found the solution
Using http://uot.dakra.lt can create the mod!
Only need the SystemUI.apk and framework-res.apk.
After the cook complete you can flash the created .zip via CWM or you can extract the two files (systemui and framwork-res) and copy them to your device.
Sent from my GT-P6810 using xda premium
you can make it yourself via uot kitchen...
http://forum.xda-developers.com/showthread.php?t=990829
I've used that with my htc devices, but now i cant because of the file size limit
Sent from my GT-P6810 using xda premium
i got no problem using it...
edan1979 said:
i got no problem using it...
Click to expand...
Click to collapse
Hmmm...
Maybe i've missed something... I will check it again tomorrow
Sent from my HTC Sensation Z710e using xda premium
Try the Themes section of the forum.
ssaass has already created one: http://forum.xda-developers.com/showpost.php?p=29273590&postcount=23
jonamafun said:
Try the Themes section of the forum.
ssaass has already created one: http://forum.xda-developers.com/showpost.php?p=29273590&postcount=23
Click to expand...
Click to collapse
Thanks!
After i've created this topic i've found that
Edit:
I've checked again the UOT and it works...
I've uploaded the framework-res and the systemui apk without the twframework-res... After the cook i've just extracted the systemui.apk from the created zip and copied to the system/app....
Hi! Total noob here!
Can someone please upload an odex SecMms.apk without contact picture for stock NEE rom..
I tried but can not succeed. .?
I can make a donation also..Please help
Sent from my GT-I9505 using XDA Premium 4 mobile app
Try this one
* EDIT: Remember ur phone have to be rooted, u have to copy the 2 files in System/App and reboot ur phone. Good luck
Thank you my friend. .i will try it tomorrow. .?
Sent from my GT-I9505 using XDA Premium 4 mobile app
Joku1981 said:
Try this one
* EDIT: Remember ur phone have to be rooted, u have to copy the 2 files in System/App and reboot ur phone. Good luck
Click to expand...
Click to collapse
Can someone please upload the original 4.3 NEE version of SecMms.apk and accompanying odex, i seem to have ****ed up the original thank you very much
Edit: i used the above two files to replace my errornous secmms.apk and flagged them 755 to be sure they had appropriate security.
But the messaging icon is still gone from my ui both in nova launcher and in touchwiz (missing from apps availiable to add to launcher desktop)
i still seem to be able to send sms:es (from GoSMS) but sending MMS still doesn't work (which is why i was fiddling with this in the first place)
Joku1981 said:
Try this one
* EDIT: Remember ur phone have to be rooted, u have to copy the 2 files in System/App and reboot ur phone. Good luck
Click to expand...
Click to collapse
It still has my friend. .but thanks for trying helping me out. .i will keep searching
Sent from my GT-I9505 using XDA Premium 4 mobile app
well this is a development issue ...
my frnd and i made this rom by porting cm 10 and x rom{awesome rom check it out }
so wen i tried to flash it something went wrong ...
it said installation aborted ... something about it being a bad file !!!!
i changes some stuff in the updater script !!!
check it out pls......
only for testing .... i am not responsible for bricked devices ......or if anything else happens
pls help me and test this rom and then tell me if it works and if it does not.... Then tell the problem...
Still a noob...
thanks
https://drive.google.com/file/d/0B44hh95qQ6iYVEtDQnc5akRLekE/edit?usp=sharing
check this link for downloading........]
My device is xolo q700i
Sorry pls ignore this I accidently made a extra thread pls check the other one and pls help......
Sent from my xolo q700i using XDA Free mobile app
Hi,
Can you give some more details
Did you build from source?
Port it from another devices?
Simply unzip a ROM for your device, make changes and rezip?
When you flashed the ROM was it a status7 error?
You say you made changes in the updatet-script, what were the changes?
The more details you give the better answers you will get
Sent from my Nexus 4 using XDA Premium 4 mobile app
demkantor said:
Hi,
Can you give some more details
Did you build from source?
Port it from another devices?
Simply unzip a ROM for your device, make changes and rezip?
When you flashed the ROM was it a status7 error?
You say you made changes in the updatet-script, what were the changes?
The more details you give the better answers you will get
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He did it porting the old way. It was the status 7 error
BTW coolster I m back only to help you
Sent from my A114 using XDA Free mobile app
Dude I took my base rom as the standard custom rom for xolo q700i- the x rom and I ported it with the galaxy Quattro stable cm... it had almost the same specifications........ I had updated the updated script of x rom by cm rom but then I used original updater script of x rom... This guide I took was from YouTube on porting and he was from XDA.....
So you took a ROM from a similar device, replaced some files, apks and libs, then changed some things in the updater-script and rezipped and signed?
Is this about right?
If so you will need to be a bit more specific about what you changed in order to help you fix your issue, again, the more specific the better your help otherwise I and others helping can only give the best guess on what to do
Sent from my Nexus 4 using XDA Premium 4 mobile app
Dude i didnt change anything i just updated it with the cm updater script
Sent from my KFTT using XDA Free mobile app
It is mediatek so no fastboot or adb and hence cant provide logcat
Sent from my KFTT using XDA Free mobile app
Yes i did the replacing of apk and lib and oder files....
Sent from my KFTT using XDA Free mobile app
Dude the guide i saw told us to just take files from the port and put it into base ...... i had seen another guide and had replaced the meta inf file but then wen i flashed it said something about
It being a bad file so i replaced the new meta inf file with the original meta inf file but i dont know now what will happen shuld i flash it .......(u can ignore this) i also had a question dat when u rezip with winrar should the zip file be normal or best mode .........it asks .........when we archive it .....(u can ignore this)
Sent from my xolo q700i using XDA Free mobile app
demkantor said:
So you took a ROM from a similar device, replaced some files, apks and libs, then changed some things in the updater-script and rezipped and signed?
Is this about right?
If so you will need to be a bit more specific about what you changed in order to help you fix your issue, again, the more specific the better your help otherwise I and others helping can only give the best guess on what to do
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
so dude yes it is the status 7 error regarding the build.prop ....... so i need help to edit my updater script so should i use the updater script of the base rom .........or do some major editing ...
Thanks for supplying more information, now I have a better idea of how to help.
You should use the update-binary for your device, not the one ported,
All editing of the updater-script will need to be done in UNIX format, not windows as EOL differs, if your using windows be sure to use notepad++ and set it up properly,
I use 7zip normally not winrar but it shouldn't matter, you need to have compression set to store,
It has been years since I have tried to make a ROM in this fashion but I don't think much would have changed, the point your at now is to get it to flash (not get the ROM to work) this means you need to fix the status 7 error, which will be done by fixing your updater-script
If you want, post a copy of the meta-inf folder for your device and the one you are porting from an I can help further
Sent from my Nexus 7 using XDA Premium 4 mobile app
Thanks so much.......... Ur thnx meter is getting one more thanks
Dude should I replace the whole Meta in folder or only the updater script....
Take a meta-inf for your device and replace the updater-script from the other one and swap it. Then you'll more than likely need to edit it to flash on yours
Sent from my Nexus 4 using XDA Premium 4 mobile app
Sorry I didn't understand anything.... I just swapped the cm 11 meta inf file with the original meta inf file.....
Well you can't do this, you need to have the update-binary for your device specifically and you need to edit the updater-script to work with yours as well.
So keep meta-inf specific for your device, and only swap updater-scripts, then you need to edit this updater-script to match the partitions of yours as well as make sure there aren't any get_props that conflict.
I highly suggest reading up on updater-scripts so you understand the changes that need to be made
Sent from my Nexus 4 using XDA Premium 4 mobile app
thecoolster said:
Sorry I didn't understand anything.... I just swapped the cm 11 meta inf file with the original meta inf file.....
Click to expand...
Click to collapse
@demkantor has guided you very well.
U should take advantage of it.
I repeat once again.
get the update-binary from any other ROM specifically made for your device.
Then modify the existing updater-script.
Make sure Mount points are correct.
That's it.
USE NOTEPAD++ else surely if you would get status error.
Good luck
Sent from my Nexus 5 using XDA Free mobile app