Strange black screen problem in Defy - Defy Q&A, Help & Troubleshooting

Hi!
I dropped my defy in 2 cm of water,everything was fine for 20 min, suddently my screen stop responding, i removed the battery, place it back turn on the sceen got quite dark. Yet I was still able to see things on screen. Then it slowly got darker and darker until it was completely black. After that I tried to push the power button but the screen didn't light up, only the 4 buttons were lit.
I noticed I was still able to unlock the screen or answer phonecalls sliding my finger from left to right on the correct area of the screen, although it remainded black all the time.
What can i do? do i have to replace the lcd?
Thanks

Related

[Q] HD2 screen , help

I dropped my hd2 Saturday on the left bottom corner , since then the the screen stayed black But the phone turns on and screen responds & also charges I just can't see what I'm doing since the screen won't turn on , and the button lights still light up when on but not the screen
so if anyone knows what's wrong please help?

Black screen after dropping the phone

So yeah I dropped my phone on its side, while the screen didn't crack at all and nothing happened at the time of the drop, after I woke up the next day my phone had this yellowish small circle on the left then this circle started growing to cover most of the screen and then it started to go brown then black and now the whole screen is black, the touch and the led lights are working, I know I should take it to a specialist or something but for the time being is there anything I can do or check to make it work again by myself ? thanks.
Nothing you can do .

Is my LCD stuffed? :(

I have an N9005 that I bought second hand just under a year ago. It's running the Phronesis 4 ROM. About a week ago a one pixel wide bright pink line appeared intermittently down the right-hand side. It looks like this (only bright freaking pink): http://forums.androidcentral.com/at...-bright-line-being-shown-display-p1070045.jpg
Today I was playing Fallout Shelter (always makes my phone pretty warm and eats battery). 15% battery warning comes up so I take it to charge. I notice the screen doesn't turn on. There is a momentary flash of dim colour at the top, but otherwise the screen is completely black. I tried pushing the power button several times, but all it did was a momentary flash of dim colour at the top but still black each time.
I took the battery out for a bit, then put it on to charge. The on screen charging display did not appear (stayed black) but after a bit the LED lit up to indicate charging as it would after the screen display turns off. I left it for a while and eventually the screen started working again (99% charge when I checked). I was then able to boot like normal.
However a while later the screen would not turn on again (just the momentary dim flash of colour at the top before black). I didn't do anything with it in this time. It just sat in standby before I tried using it again. The back button and hamburger menu buttons are not seemingly lighting up either. But the led works fine with notifications. I tested calling my phone and it rings fine - if I slide accept the call where it is normally on the screen, I can accept calls and talk like normal. But the screen remains black. So clearly the digitizer works fine.
I have tried taking out the battery for a long period of time, taking the battery out and discharging the remaining power by holding the power button (5 minutes), I have tried taking the phone apart and cleaning the display connector with some isopropyl alcohol and firmly reattaching. Screen is still black.
Is this a problem with a malfunctioning LCD or could it be something like the GPU? I don't want to pay $150-$250 for a replacement screen assembly only to find that it's some other problem
Thanks in advance!
I would suggest to get a new device.
Keinbockwurst said:
I would suggest to get a new device.
Click to expand...
Click to collapse
I prefer to repair rather than replace unless I have absolutely no other choice, thanks.

Second screen pixels are On although i Turned the Second Screen Off

hi . i have v20 h990ds .
when i turned the second screen Off when main screen is On , in setting , the phone didn't show any thing (that is normal) but if i go to completely in dark room i can see that pixels of second screen electrically are On (black backlight can be seen without displaying anything). while i expect that when i set the (second screen being off when main screen is on) the power of second screen getting to off and don't use any battery .
when i press power button to turning off main screen , the second screen goes off at the same time as the main screen , completely.
can anybody tell me that is it occurs for you , please? is it normal when you turn second screen off the power of it (that can be realized in dark room) don't turned off?
That is completely normal. The second screen and main screen share the same backlight even when turned off you will still see some light bleed through the black pixels. They dont have separate backlights so it is still on behind the screen.
Hi! Well as many people don't know but Lg v20's main screen and the second screen are the same panel having a Cut around the left corner which make it feels like that Both displays are separate and also they make some kernel tweaks to make them virtually separate.So even you turn off the secondary display its backlight will still Remain on.
Thanks

Galaxy S8 Screen problem HELP!!!!

galaxy s8 started to give a white screen with green dots. unresponsive when screen on. at first it was fixed by turning screen off and on again. but now it only gives that white screen with green dots or original screen with a fade white on top [this also faded away till white and green dot screen comes within few seconds]. in voice commands can turn on bluetooth. phone s functins are working fine. when call comes i can answer and talk by guessed touching the answer button. fingerprint unlock wont work. so i cannot access the phone by computer. by connecting to smart watch most functions can be done. but screen is not coming back to normal/ work. please help

Categories

Resources