Hello, I have this problem on my phone:
I purchased this on eBay:
http://www.ebay.com/itm/180844682216?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649#ht_2134wt_1265
But did not solve the problem even with the new screen I can see those "pixels"....what's the problem then? cannot be fixed? could you help me out please? thank you!
thats only the thouch glass ! Not the display
Sent from my MB526 using xda app-developers app
yuo need to replace the LCD, The Bezel holds the Glass, which the digitiser is attached to ( allows the touch screen to opperate) this is the top bit that you touch, underbneath this is a separate LCD ( liquid crystal display) if the LCD is broken you get a bleeding effect on the display, if the glass is broken you get a crack, or spiderweb crack on the scree, but underneath the display is OK.
Have you tried putting your defy in the Freezer?
If it looks like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it might work
Simply take your Battery SDcard and Micro SD card out of your defy and put it in a plasticbag and close it very hard so that no air or water gets in there
After 12 hours take your defy out and wait until it reaches normal temperature, rice can be good if some water got in there
Then put everything back in and look if it worked
Steveletack said:
Have you tried putting your defy in the Freezer?
If it looks like this
it might work
Simply take your Battery SDcard and Micro SD card out of your defy and put it in a plasticbag and close it very hard so that no air or water gets in there
After 12 hours take your defy out and wait until it reaches normal temperature, rice can be good if some water got in there
Then put everything back in and look if it worked
Click to expand...
Click to collapse
Dude You serious!? 12 hours in freezer!?
veddandekar said:
Dude You serious!? 12 hours in freezer!?
Click to expand...
Click to collapse
it does work!
make sure u dont keep the batt in
Sent from my MB526 using xda premium
Steveletack said:
Have you tried putting your defy in the Freezer?
If it looks like this
it might work
Simply take your Battery SDcard and Micro SD card out of your defy and put it in a plasticbag and close it very hard so that no air or water gets in there
After 12 hours take your defy out and wait until it reaches normal temperature, rice can be good if some water got in there
Then put everything back in and look if it worked
Click to expand...
Click to collapse
Had these twice. They were gone after 2 days without freezer! Could be that it doesn't disappear with others. Anybody knows what it actually is?
Yours is clearly damaged. You only replaced the protection glass and digitizer(touch screen) and still need the LCD. Please don't put it in the freezer for everything.
Someone told me that the liquid crystals in the displays might go out or something like this
I left my defy 2 days on the back but it didnt help! The freezer method did but remember to do it only without Battery Sim and MicroSD card
A photo of your problem wouldnt be bad!(if you have uploaded one i cant see it)
Related
hey guys, i succesfully changed my housing, after the scary task of removing the touch module, and then glueing it onto the next one, and letting it sit for 24 hours, its working flawlessly, here is some pics excuse the bad quality, was taken with my iPod touch
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ignore my spelling, im not to good at it
That looks cool... I have the same setup with the black in the front... did you manage to get any dust in there? I got some in mine... and its annoying as hell sometimes
saketh321 said:
That looks cool... I have the same setup with the black in the front... did you manage to get any dust in there? I got some in mine... and its annoying as hell sometimes
Click to expand...
Click to collapse
nope, i used a clear box with gloves so i didnt get any crap inside it
would superglue be alright to use under the corner of the touch module?
bottom right corner is lifting and nothing i put on it will hold it, ofcourse super glue would, just dont want it to stuff my module
would it be alright?
Whoa. Nice. It's a Panda Phone~ Lol.
Glad you survived the surgery operation >.<
just used superglue to stick the corner of the touch module down.
its stuck, it aint going absolutly no where, man this **** is strong, stuck my finger to my cloth, had to use salt water to get it off
How did you remove digitizer from housing with heat or something else?
petric1 said:
How did you remove digitizer from housing with heat or something else?
Click to expand...
Click to collapse
Per schematics I looked at a while ago, and pictures I've seen, I think that the digitizer and the glass are bonded together. He probably just replaced the glass and digitizer at the same time.
Sent from my X10i using XDA App
That is not cheap solution digitizer cost money!Why replace it if it works?
This just has to be bullcrap!?
........ How?
I found my phone's screen appear something on my screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yeabilo said:
I found my phone's screen appear something on my screen
Click to expand...
Click to collapse
Things are supposed to appear on your phone's screen. If nothing appeared on your screen, that would be a problem.
yeah sorry but i would need a little better understanding of the question to help you out. what appeared on your screen? whats causing you problems?
huggs said:
Things are supposed to appear on your phone's screen. If nothing appeared on your screen, that would be a problem.
Click to expand...
Click to collapse
Yeah, but what looks like WET SPOTS are NOT supposed to be there. Looks like some sort of screen damage. Do those spots go away when the screen changes?
are you talking about those hazy thingies?
Have you exposed your phone to a place with rapid ambient temperature/humidity change? this might be water under the glass?
or it could be a protector screen gone bad?
you need to be more specific otherwise because there seems nothing wrong beside that.
Dr.Move said:
are you talking about those hazy thingies?
Have you exposed your phone to a place with rapid ambient temperature/humidity change? this might be water under the glass?
or it could be a protector screen gone bad?
you need to be more specific otherwise because there seems nothing wrong beside that.
Click to expand...
Click to collapse
Looks like it might be the screen protector. At least he should hope that it's only the screen protector. If not, hope he has $$$ or $ and a steady hand.
rr5678 said:
Looks like it might be the screen protector. At least he should hope that it's only the screen protector. If not, hope he has $$$ or $ and a steady hand.
Click to expand...
Click to collapse
or just try an hairdryer at low temp for a bit
now seriously, if that's just humidity under the glass, leave it off for two days with the battery cover open, best case scenario all of it will be gone without any sigh it was there.
if it is water try opening it up .. and putting it in a bag rice for a day or two ..
Hello, i have a problem with my defy. Big blue dot appear after i accidentally drop my defy.
Here the picture.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What should need to replace if i want to fix the problem?
http://www.etradesupply.com/oem-motorola-defy-mb525-digitizer-touch-screen-without-adhesive.html
or
http://www.etradesupply.com/oem-motorola-defy-mb525-digitizer-adhesive.html
or
http://www.etradesupply.com/oem-motorola-defy-mb525-lcd-screen-with-lcd-flex-cable-ribbon.html
Thanks
RIP LCD
U gotta buy a new Lcd with ribbon
Sent from my MB526 using xda premium
Exact same happened with mine after I dropped it. Using it with 3 big blue dots since an year now :<. Do I need to buy the housing too?
bikerabhinav said:
Exact same happened with mine after I dropped it. Using it with 3 big blue dots since an year now :<. Do I need to buy the housing too?
Click to expand...
Click to collapse
Have you tried putting your defy in a airtight moisture proof container and then stowing it in the freezer for a few hours? Worked for some people, but be careful, make sure moisture and air do not enter the container.
Sent from my Nexus 7 using Tapatalk
+1
I had the exact same thing after dropping my phone TWICE. I put it in a ziplock bag, without the battery, sim card, nor sdcard, and then in the freezer. In total it took about 7 days for the blue spots to clear, but I took it out every 24 hours to check on its progress. I just took it out and let it dry off for about 10 minutes, then put the battery in and turned it ont to check how much was clearing.
If that doesn't work, replace the LCD.
hotdog125 said:
Have you tried putting your defy in a airtight moisture proof container and then stowing it in the freezer for a few hours? Worked for some people, but be careful, make sure moisture and air do not enter the container.
Click to expand...
Click to collapse
I did put it in freezer, twice. both times the sizes reduced a bit, but not enough. I guess I need an industrial freezer, like the one they have in ice cream stores.
Antiga Prime said:
+1
I had the exact same thing after dropping my phone TWICE. I put it in a ziplock bag, without the battery, sim card, nor sdcard, and then in the freezer. In total it took about 7 days for the blue spots to clear, but I took it out every 24 hours to check on its progress. I just took it out and let it dry off for about 10 minutes, then put the battery in and turned it ont to check how much was clearing.
If that doesn't work, replace the LCD.
Click to expand...
Click to collapse
So, it work for you, i already try method put my defy in the freezer, but not really working,
so i just buy new lcd from ebay just $14.
Today I was noticing a really strange thing about my display.
When the S4 is lying flat on the table and you look at it from the side you can see that the display is curving out of the chassis. It is hard to explain but the display is not even with the chrome/plastic rim (the one just above the surrounding metal frame) as it should, it stands out (about 1mm). I can push it back into the chassis so that it is perfectly even again but after a fews seconds it stands out again. It seems like the display is glued into the chassis but the glue isn't gluing any longer and the display is slowly working its way out of the chassis.
Does anybody know what I mean?
Or has experienced anything similar?
I wasn't able to take a nice picture of what I mean, you just can't see it in my pictures. But I found a picture of a HTC One with the same problem. I hope you guys can get the idea.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
E_Cartman said:
Today I was noticing a really strange thing about my display.
When the S4 is lying flat on the table and you look at it from the side you can see that the display is carving out of the chassis. It is hard to explain but the display is not even with the chrome/plastic rim (the one just above the surrounding metal frame) as it should, it stands out (about 1mm). I can push it back into the chassis so that it is perfectly even again but after a fews seconds it stands out again. It seems like the display is glued into the chassis but the glue isn't gluing any longer and the display is slowly working its way out of the chassis.
Does anybody know what I mean?
Or has experienced anything similar?
I wasn't able to take a nice picture of what I mean, you just can't see it in my pictures. But I found a picture of a HTC One with the same problem. I hope you guys can get the idea.
Click to expand...
Click to collapse
Better don't fix it yourself, just bring it back from where you bought it and ask to fix it.
This is unacceptable for a flagship device and should be replaced/fixed under warranty.
What he said.
Send it back mate. Don`t be tempted to touch it, just ring your provider up and tell them. They are obliged to do it under warranty
Never mind.. my silly mistake.
Dean-xXx said:
Better don't fix it yourself, just bring it back from where you bought it and ask to fix it.
This is unacceptable for a flagship device and should be replaced/fixed under warranty.
Click to expand...
Click to collapse
Will return it under warranty.
The reason I was starting the thread was because I wanted to know if this is a known S4 issue. If other users are experiencing similar problems. Because when there is a chance that this will happen again and again then maybe I'll leave Samsung and go for another device...
E_Cartman said:
Will return it under warranty.
The reason I was starting the thread was because I wanted to know if this is a known S4 issue. If other users are experiencing similar problems. Because when there is a chance that this will happen again and again then maybe I'll leave Samsung and go for another device...
Click to expand...
Click to collapse
No it's a know issue, just happened to be a manufacturing defect.
Try heating it up with a hairdryer and try to push it back into place. The heat will make the glue sticky again so hopefully it will work.
krico said:
Try heating it up with a hairdryer and try to push it back into place. The heat will make the glue sticky again so hopefully it will work.
Click to expand...
Click to collapse
Thanks for your advice, but because I'm (as already mentioned) still under warranty I won't try anything risky as that
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It was an amazing phone, went through hell and back, but the cold temperatures and humidity finished it off. I'm sad...
Probably going to get the new Zenphone 2 or Moto G 2 4G.
Was running stock 4.1.2, tried lollipop, kitkat, ICS, JB, GB, amazing phone, I loved it <3
Dont Cha!!!
MikeTheBlueFox said:
It was an amazing phone, went through hell and back, but the cold temperatures and humidity finished it off. I'm sad...
Click to expand...
Click to collapse
NOOOOOOOOOOOO!!!!
Don'tcha throw it away! I know, you're keen on a new one - so get it, but give the S2 one more try; if you guess, humiditiy was the last strike, bake it in the oven at around 50 degrees, or leave it a few days on/at the heating radiator - or, if you live anywhere no heater necessary, leave it under a black cloth in the sun. Sometimes it works....
naturally WITHOUT the battery
Some guy at a phone repair shop might not take so much bucks either for only disassembling and cleaning / drying the inner ....
good luck
brin,
still using my old one at cyano 4.4.4 and have a spare one from my lady who went iphone
MikeTheBlueFox said:
It was an amazing phone, went through hell and back, but the cold temperatures and humidity finished it off. I'm sad...
Probably going to get the new Zenphone 2 or Moto G 2 4G.
Was running stock 4.1.2, tried lollipop, kitkat, ICS, JB, GB, amazing phone, I loved it <3
Click to expand...
Click to collapse
Do not forget to donate it to someone who wants to develop for the s2 if you are thinking in throwing it in the trash. That's sad to see too...
brindisi said:
NOOOOOOOOOOOO!!!!
Don'tcha throw it away! I know, you're keen on a new one - so get it, but give the S2 one more try; if you guess, humiditiy was the last strike, bake it in the oven at around 50 degrees, or leave it a few days on/at the heating radiator - or, if you live anywhere no heater necessary, leave it under a black cloth in the sun. Sometimes it works....
naturally WITHOUT the battery
Some guy at a phone repair shop might not take so much bucks either for only disassembling and cleaning / drying the inner ....
good luck
brin,
still using my old one at cyano 4.4.4 and have a spare one from my lady who went iphone
Click to expand...
Click to collapse
Haha, I'll be giving it away to a friend, It's good enough for what he does, he just needed a phone that would be able to use Viber to talk to his girl. I bought myself an used S3 today, i9300, no 2GB of Ram sadly, but hey it works. I've had one before and I missed this phone <3
Thanks for your help, but to solve this issue it'll have it's screen replaced, it's cracked and the humidity gets to it easily.