Database Users

Screen freezes on splash HTC HD2

Had before the ENERGYROMS, but my HD2 (leo) was hanging over- and over, so I've read about TASK29.
Well I just downloaded it, extracted somewhere and followed all instructions, but now after using TASK29 I only get the splashscreen.
Is there any way to solve this?
Before I had Energy.Leo.23569.Sense2.5.MaxSense.UI.Jun.02, HSPL2 and Leo_Radio_15.40.50.07U_2.11.50.20.
I'm a bit desperate now, anyone who knows what the **** I bricked now?
Cheers

when you flashed energy you probably forgot to flash a compatible radio.
go into boot loader, flash any radio mentioned in the energy posts (you did read EVERY word in thee first few posts, right? cos only noobs skip straight to the download without reading first....)
once the radio is flashed go back into boot loader and flash energy.

Maybe it's not bricked yet - remove the battery, let it cool down for some 15 minutes, than try again?

samsamuel said:
when you flashed energy you probably forgot to flash a compatible radio.
Click to expand...
Click to collapse
Jo mate, no as I said; I had an Energyrom AND the correct radio (newest), but I had problems with hanging homescreens etc, so it was so annoying that I was looking for a good way to solve it. So someone said here that I had to download TASK29 and CLEAN the whole HD2 and after that install the ENERGYROM again so it would be all refreshing as new. But now it doesn't work, after using TASK29, at all! I'm ****ed

You have reflashed the Radio and the Rom you want after the task29 havent you? if you have, try flashing a HTC Stock rom. If that works then flash back to the Rom u want.
But it's almost certainly because you dont have the correct Radio Rom on.

yea, what the_ape said.
when you task 29 it wipes the phone so it won't boot.
enter bootloader and flash your rom.

basically repeating what Sam said but looks like you don't have a ROM on your phone at all now, just flash the ROM you want again and all will be good

Thanks people, gonna try it within an hour, I will let you guys know if it's gonna work

[q] help its' all gone wrong!!!!

Hi,
i was going to try to install new radio rom for my hd2, downloaded custom ruu and installed on phone, now phone just hangs at start up. i have tried the hard reset but to no avail, anybody help me please?

did you install the correct hspl for your phone and did you flash a compatible radio?

that happenes when a radio is not compatible with the rom

probably the wrong radio, check out this thread; HTC Leo: HD2HD2 ROM Development[HSPL/HSPL2] HowTo flash everything ;611433

Thanks guys,
lesson learned, i'm a numpty!!!! managed to install original rom from bootloader, still at least learned how to do that. long time head scratching.

[Q] Stuck on HTC Logo

Hi, been trying to get android on my HD2
things ive done:
all the things you need to do.(magldr etc)
Turned on the phone, selected AD Recovery
in CWM i select: install zip from SD
->Installation complete
->rebooting
Stuck at HTC logo
I have formatted my SD
I have tried another SD
I Have tried different roms
but the phone still hangs, what am i doing wrong?

same problem....any help??

I would say start over with task29 first. Then install the rest. If you still have the same problem, try re-downloading all you files and start over again. Just asking, did you flash hardspl 2.08 first?
Sent from my HTC HD2 using XDA App

i bought the phone with hardspl 2.13 and windows phone 7 on it, but that is a RUBBISH OS if you are a dane!
What is task29?

brugernavn said:
i bought the phone with hardspl 2.13 and windows phone 7 on it, but that is a RUBBISH OS if you are a dane!
What is task29?
Click to expand...
Click to collapse
Task29 removes all os software just like formating a hard drive. As for your hardspl, that might be a problem, if my memory is still there, you need to have hardspl 2.08. that seems to be the only version that works. Try giving this some reading time :http://forum.xda-developers.com/showthread.php?t=893948 or look at this page for all kinds of info : http://forum.xda-developers.com/showthread.php?t=905841

montecarlo5 said:
Task29 removes all os software just like formating a hard drive. As for your hardspl, that might be a problem, if my memory is still there, you need to have hardspl 2.08. that seems to be the only version that works. Try giving this some reading time :http://forum.xda-developers.com/showthread.php?t=893948 or look at this page for all kinds of info : http://forum.xda-developers.com/showthread.php?t=905841
Click to expand...
Click to collapse
At first i tried installing a rom thoug DAF.EXE and that works.
then i installed CWM and tried flashing a rom though there, and then it just gave me the green HTC logo

Did you guys install the correct recovery file before installing the zip?
http://forum.xda-developers.com/showthread.php?t=898913

[Q] Task 29 problem

I'm sorry i know it's against the rules to be starting a new thread but it's been a week i've been asking for help and no one noticed. This is just a try to come noticed.
I installed task 29 on my blackstone. I had olinex 1.56 installed and later did the task29 with radio 1.13, 1.14 and 1.17 After successfully doing it i went on step 2 that is installing a clean rom. I tried these roms
blackSTONEhengeHyPerSlim_4_1
RUU_TOUCH_HD_MARYONE_23148_WWE_191110
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship(3)
They get installed but after i store the contacts and everything it gets stuck if kept for like half an hr. The screen doesn't respond but power button and the volume button works.
I took my phone to a repair center and they couldn't fix it. So please help me i've just got only one phone.
I don't mean to offend any moderators by this but i'm just asking for your help. Thank You

Try reinstalling stock ROM after Task 29.
Restore ONLY contacts, and then try using device for several days.
DO NOT install any other software!!!
If it works, then problem is in some data or software you're restoring.
If not, restore original SPL and original ROM and try again.
If it does not work... and service can not help you... then sorry...

Hello i did reinstall the stock rom after task 29 and i was using pimbackup for restoring but that freezed my phone so i installed the stock rom again and thought of not using it. Did that but nothing much helped.
I hope believe these are the correct shipped roms
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship(3)
Everything on xda has worked like wonders for me. Be it android on any other rom but right after task29 nothing seems to be working on my phone.
One thing i've noticed after installing any rom after task29 is if i get to the bootloader it gets me to a 1 sec white screen saying no image found. I hope what's causing a problem.

Do you understand WHAT Task 29 is?
It formats the partition drive of your device where the ROM resides. Meaning, it wipes any data regarding ROM.
So of course it would say "No image found".
I don't know which ROM is stock for your device. Try to update ROM via HTC site.
If lucky, it will suggest / let you find adequate ROM.
For my device it's 1.56.407.2 (German)!
If unlucky, it will say "Not supported" or something like that - then go for Orange 1.59.61.2 ROM.
And you might try one 1.5x ROM flash WITHOUT Task 29...

Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.

Thanks will do it and keep yu updated with it..

simplistian said:
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Click to expand...
Click to collapse
Thanks i tried installing the stock rom like you told me but then got stuck on the screen alignment screen. I later installed blackSTONEhengeHyPerSlim_4_1 and now it's responding to every touch. Thanks alot. I hope this stays like this and yes instead of restoring i forwarded all the contacts through bluetooth. Owe you a BiiiiiiiiiiiiG thanks..

Too soon to be happy as same again..I don't think there should be a problem with touch as it works fine for first 1hr but right after something gets stored by something i mean contacts it stops reponding after sometime. The volume and power button work all fine. I can't make out the problem. Any ideas or suggestions. Shall i make a video and post ??

FIRST you have to make it work with factory settings - stock SPL and stock ROM.
After that flash what you like...

I think you have to follow Bodisson's suggestion, do everything as stock and retest without restoring anything. If it still failed...... you should have it repaired
Good luck!!

I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...

Bodisson said:
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Click to expand...
Click to collapse
Glad to see somebody researching things out and settling on a radio he prefers due to performance rather than those just going for latest

I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.

kulwant said:
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
Click to expand...
Click to collapse
All rom's should work with each radio to be honest. Glad your device is working better, though still a little baffled why you're still having difficulties
EDIT - You are on a wm6.1 rom. Is the rom based on 1.56+, if not you may need to revert to HSPL 1.14

I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers

kulwant said:
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
Click to expand...
Click to collapse
I'm baffled but still want to get to the bottom of your issue and would appreciate any help from other members who may have idea's on how to solve your issue. From what I've read everything you have done is correct, but I don't like being stumped!!
If we start from the start, we may get to the bottom of this........

Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.

kulwant said:
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
Click to expand...
Click to collapse
Well as you know a T29 formats device so you need to flash a rom or you'll be stuck at boot screen. Before you do a T29 it states you must have HSPL on your device first. Now from what I've read you did have HSPL on first and your T29 worked as you where stuck at boot screen afterwards.
I'm assuming you turned device off, booted into bootloader then flashed youir rom (blackSTONEhengeHyPerSlim_4_1) which is based on 1.56+ as was your HSPL.
This all seems correct so I'm not sure what went wrong.
Is above all correct?
Did you try a T29 again and flash different rom or did you just flash different rom over existing?

I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.

kulwant said:
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
Click to expand...
Click to collapse
Right, I never put any files in same folder as it only confuses flashing process and can cause issues. I.e. put T29 in its own folder, radio 1.14 in its own folder and then rom in another folder.
Do a T29 and when its complete, I.e. stuck in smart mobility screen. Then you take out battery to turn phone off. After this put phone into bootloader and flash rom. Then flash radio after it as a lot of roms have a radio file included
...........................
Sent from the improved version of Tapatalk, better known as Forum Runner

ERROR: ERROR: Cannot read ramdisk image

Hello guys,
Does anyone know what does this message mean:"ERROR: ERROR: Cannot read ramdisk image"?
It appeared on my HD2 while I was installing an Android ROM on it and now I cannot run any other OS on it but Windows Mobile. I tried Google but had no luck. Only one person as far as I understood experienced this problem but I have no reply from him and I am not even sure if he managed to solve the problem anyway.
So, if anyone knows something about it I would be happy to hear. Any help would be useful. Thanks in advance!
Best regards

zgeorgiev said:
Hello guys,
Does anyone know what does this message mean:"ERROR: ERROR: Cannot read ramdisk image"?
It appeared on my HD2 while I was installing an Android ROM on it and now I cannot run any other OS on it but Windows Mobile. I tried Google but had no luck. Only one person as far as I understood experienced this problem but I have no reply from him and I am not even sure if he managed to solve the problem anyway.
So, if anyone knows something about it I would be happy to hear. Any help would be useful. Thanks in advance!
Best regards
Click to expand...
Click to collapse
Did u flashed radio ?

I reflashed radio, did task29, flashed hspl, flashed Magldr, flashed stock WM ROM from my PC, then again from sd card and no result. WM ROM works ok but that's it. No Android or WP7 can be flashed. In order to be more specific, here is what I do:
1. HSPL 2.08
2. task29 with Radio 2.15
3. Magldr
4. CWM
And when I try to enter AD Recovery from the Magldr menu I receive the message I mentioned in my first post and there is nothing more to be done but using the phone with WM which in my opinion makes out of my HD2 a piece of crap.

zgeorgiev said:
I reflashed radio, did task29, flashed hspl, flashed Magldr, flashed stock WM ROM from my PC, then again from sd card and no result. WM ROM works ok but that's it. No Android or WP7 can be flashed. In order to be more specific, here is what I do:
1. HSPL 2.08
2. task29 with Radio 2.15
3. Magldr
4. CWM
And when I try to enter AD Recovery from the Magldr menu I receive the message I mentioned in my first post and there is nothing more to be done but using the phone with WM which in my opinion makes out of my HD2 a piece of crap.
Click to expand...
Click to collapse
Let mi simple u Task29 and Radio Rom
Task 29 - When u do task 29 to phone u delete everything even radio rom. So the thing u need to do is do this for magldr :
-Task29
-Radio Rom
-Magldr
-CWM
-Wipe
-Flash Rom
-Calibrate battery (some roms do it itself)
If it will make u easier i can make tutorial but im pretty much sure there is milions of them .
Try that way and report if it worked . Its 30min process.
EDIT: HD2 powered by WM is crippled yea. Android is far superiour even withou cam. But let me tell u one thing first thing why i tooked HD2 is Windows by stock and customization possible. Didnt carred about low battery etc. Windows is till now unbeatable bussines platform. iOs is near but its not it. Android hard to get bussines capable like windows 7. What I mean windows is bussines ready,iPhone is kinda ready and on android u have to customize like hell to get everything (at least what I as system admin need)

Task29 does not delete your radio. I was sure of it because I had flashed my phone a lot of times in the past, but anyway, I tried your method and the result was the same. When I install Magldr and then CWM, the phone does not let me enter the CWM menu so I cannot continue with the flashing of the Android ROM itself. It is just not possible without CWM. I also tried cLK method but when I press and hold the home key, the phone restarts and I get to a dead end once again. Thanks for your help anyway.
As far as WM is concerned, there is absolutely no chance for me to use this phone with this OS. if I cannot find a way to manage the problem I will just sell the phone and buy a native Android one which will make things much easier for me.
Best regards

Which rom are u trying to install?
Sent from my HTC HD2 using Tapatalk

It is all the same which one because when you are not able to enter the CWM menu you cannot install anything, but for instance, let's say this one: http://forum.xda-developers.com/showthread.php?t=1264828

I had problems booting that rom too. Try this one http://forum.xda-developers.com/showthread.php?t=1326217 almost perfect. Mwakious has some bugs i w8 for him to fix it

You don't follow what I say. I cannot enter CWM menu so I cannot even start flashing any ROM, it doesn't matter which one it is.
Merry Christmass by the way!

Which windows mobile u have/had ? Can u run android from sd ? Can u tell me exact procedure u tried to install nand android? If u want to try ffaster u can pm me to send u skype or gtalk.

Hi
I have the same issue, in bootloader on ad recovery.. i get cannot read ramdisk image, I will not uninstall ANDROID, because I will no longer support android, if I can not install any other roms
Any other advice, but to not lose my actual ROM!!!!
PS: I had installed ROM Manager latest, and installed clockwork from rom manager, Till then the recovery worked....

Had the same problem yesterday. I used the HD2 Toolkit to repartition, by the way it installs Recovery 5.
Then everything worked fine.
Sent from my NexusHD2 using XDA Premium App

Reaper1337 said:
Had the same problem yesterday. I used the HD2 Toolkit to repartition, by the way it installs Recovery 5.
Then everything worked fine.
Sent from my NexusHD2 using XDA Premium App
Click to expand...
Click to collapse
And do I lose my actual ANDROID ROM?
And How to use that toolkit?
THANK YOU IN ADVANCE!
EDIT:
I managed to fix my problem by HD2 Toolkit 4.2.0.1 with Maglrd update recovery.
THANK YOU!!!

rilley said:
I managed to fix my problem by HD2 Toolkit 4.2.0.1 with Maglrd update recovery.
Click to expand...
Click to collapse
Could you please explain me step by step how exactly you managed to solve the problem. I installed HD2 Toolkit 4.2.0.1 and try to use Update recovery function but the console that opens after I start the process freezes and I cannot continue. There is an explanation in it saying that probably the USB connectin is not good. However I use the USB flasher in Magldr menu for this connection between the phone and the PC and I don't know another way to connect both devices for the installation process. Is there something that I am missing?
By the way The message that I receive now when I try to open CWM changed from "...cannot read ramdisk image" to "...cannot read kernel image". Does it make any difference?
Thanks in advance!

@By the way The message that I receive now when I try to open CWM changed from "...cannot read ramdisk image" to "...cannot read kernel image". Does it make any difference?
For this question I do not know any answer, but for USB Connection I know because I had the same problem:
Put your phone in debugging mode.. and connect it to PC..
Use usbdeview to delete any android drivers from that list..
Then in device manager find any new hardware, and right click, and update: Browse my driver manually> Let me pick my driver> find the driver from http://forum.xda-developers.com/showthread.php?t=1090783 find "Download Drivers By T-Macgnolia", and after that you need to find Android Driver installed in device manager, after that hd2 toolkit will work.

Solution
You have to copy the files in the. Zip attachment inside the SD.
Make the whole process as usual, but instead choose the option you choose AD Recovery Boot option AD DS.
This way you can access the recovery menu and load the rom.
regards

Thx a lot!!!
This worked for me- just perfect!!!
Mikel

Worked for me as well, thanks very much, I was about to see how far the phone could fly.

Thanks
Hi, and many thanks.
I fixed my error like a charm.

Had the same problem
Thank you, this realy helped me out!