Related
Help!
First time attempt at using HPSL and may have bricked my HD2 :-(
I have a Voda supplied HD2 so can't install the stock ROMs directly...I thought I would be able to do so via HPSL, but it seems not. I was trying to install 1.66 (UK WWE) following the HPSL for dummies guide, and did the following:
- installed HPSL onto HD2, confirmed by going into bootloader
- put nbh file (extracted from stock .exe) onto SD card, named LEOIMG.nbh
- entered bootloader and chose flash option via power button
- flash started (minimal progress)
- within 2mins error showed
- now going into bootloader shows
00028002
Not allow
then..
SPL-1.42.0000 :-(
Upgrade ROM code error Please try again
If I start normally I get a warning triangle.
How can I get my HD2 back from the dead, ideally with 1.66 rather than the crummy Voda 1.43? (can anyone point me at a stock ROM for the voda 1.43, perhaps that would at least unbrick it?)
Help!!!!
*EDIT* Currently downloading the Voda 1.43 image, hoping I can at least get that back and running...if that works will still be keen to find out how to apply stock 1.66 via HPSL (bearing in mind that the CID lock(?) means I can't apply 1.66 on my voda device thru normal means)
CraigBruce said:
(can anyone point me at a stock ROM for the voda 1.43, perhaps that would at least unbrick it?)Help!!!!
Click to expand...
Click to collapse
The 3rd sticky down in the HD2 ROM Development thread is titled, "[REF]Leo Official ROMs" - Click that.
Then click, "Shared folder for shipped Leo ROMs".
The first "box" will have the title "Leo 1.43" under it. Click the hand carrying the folder icon.
You'll be greeted with 3 ROM's, select RUU_Leo_Vodafone_UK_1.43.405.1_Radio_Signed_15.26. 50.07U_2.04.50.22_2_Ship.exe and download it.
Hope that helps.
Good luck with getting your phone back up and running.
Your device is not bricked. I think you have not installed HSPL properly.
Try installing HSPL again. As it seems your HSPL is not installed properly. Follow the following instructions very carefully :
Connect your phone to USB
I think when you boot in by default your device goes into bootloader if not press volume down + power butoon on the same time, your phone will enter tri color bootloader mode.
At the bottom of your screen it shoul show "USB"
Now download the HSPL.zip file(I have attached it here)
Now run HSPL.exe and follow the onscreen insteuctions.(Mostly you have nothing to do it will start installing automatically)
After a while on the screen of your phone a text will appear saying "We hacked it". If this text is displayed then everything went ok. Now confirm by clicking yes on the computer screen and it will finish the process.
All done.
Your phone will restart.
If you want to check that your fone has HSPL then press volume down+power key at the same time. The phone will enter into bootloader and should show "cotullaHSPL".
Now you can install any ROM and it will run properly.
Thanks - had just found that and started downloading as you posted this..fingers crossed! If this works will still be keen on ways to apply 1.66 (stock) to my voda CID locked device.
ankush1492 said:
Your device is not bricked. I think you have not installed HSPL properly.
<snip>
After a while on the screen of your phone a text will appear saying "We hacked it". If this text is displayed then everything went ok. Now confirm by clicking yes on the computer screen and it will finish the process.
All done.
Your phone will restart.
If you want to check that your fone has HSPL then press volume down+power key at the same time. The phone will enter into bootloader and should show "cotullaHSPL".
Click to expand...
Click to collapse
This is exactly what happened 1st time I installed HSPL...however trying it again did get the phone back and apparenty healthy again....thanks!
So - 2nd attempt to flash the 1.66 ROM, same as before. Confirmed HSPL installed via tri-colour bootloader screen, selected (via power button) option to flash from SD. Progress bar gets to (max) 10%, Warning triangle briefly shows then phone goes back to tricolour bootloader (but with std. SPL version) and nothing more happens.
Should I be waiting longer ? i.e. is the phone potentially still flashing when on the tricolour, std. SPL, screen ? Not flashed an HD2 before so not 100% sure I'm doing this right..will double check videos on this site, sure I'm just being stupid/impatient/not read enough....may try downloading the ROM again incase corrupted.
Anyway, HSPL installed for 3rd time and phone appears fine back running with 1.43.
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
CraigBruce said:
This is exactly what happened 1st time I installed HSPL...however trying it again did get the phone back and apparenty healthy again....thanks!
So - 2nd attempt to flash the 1.66 ROM, same as before. Confirmed HSPL installed via tri-colour bootloader screen, selected (via power button) option to flash from SD. Progress bar gets to (max) 10%, Warning triangle briefly shows then phone goes back to tricolour bootloader (but with std. SPL version) and nothing more happens.
Should I be waiting longer ? i.e. is the phone potentially still flashing when on the tricolour, std. SPL, screen ? Not flashed an HD2 before so not 100% sure I'm doing this right..will double check videos on this site, sure I'm just being stupid/impatient/not read enough....may try downloading the ROM again incase corrupted.
Anyway, HSPL installed for 3rd time and phone appears fine back running with 1.43.
Click to expand...
Click to collapse
Yeah, the 1.66 ROM you've downloaded may be corrupted. And next time, try installing the ROM with USB connection and the ROM's .exe file. You SPL is reverting back to stock, so it's possible that the culprit is flashing with SD.
OK, problem solved...
Rather than installing the stock ROM via HSPL bootloader I installed HSPL and then ran the RUU exe for the stock ROM. Phone now upgraded
dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
Thats not true, you can flash custom roms with hspl from an sd card
see my video *here*
dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
[★] said:
Thats not true, you can flash custom roms with hspl from an sd card
see my video *here*
Click to expand...
Click to collapse
I believe Dragon Soft was possibly referring to not using a stock ROM from SD? If I remember correctly flashing a Stock ROM from SD with HSPL on will remove HSPL.
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Custom ROM absolutely no probs with flashing from SD, the HSPL will stay intact, good work on the video ★
CraigBruce said:
OK, problem solved...
Rather than installing the stock ROM via HSPL bootloader I installed HSPL and then ran the RUU exe for the stock ROM. Phone now upgraded
Click to expand...
Click to collapse
Ok. I think you were trying to install official ROM. When you install an official rom your bootloader will revert back to SPL...
dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
thats not true. After HSPL you can intall directly from sd card..I have done it almost 100 times.
Ibb1982 said:
I believe Dragon Soft was possibly referring to not using a stock ROM from SD? If I remember correctly flashing a Stock ROM from SD with HSPL on will remove HSPL.
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Custom ROM absolutely no probs with flashing from SD, the HSPL will stay intact, good work on the video ★
Click to expand...
Click to collapse
Well if he does mean that then fair enough, I just thought that he meant custom when he said "that are not official" but whatever, sorry for the mis understanding
Ibb1982 said:
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Click to expand...
Click to collapse
I got my Leo two days ago, went home, put HSPL on it in the first place, wanted to upgrade the stock ROM, and ended up same as CraigBruce. Really frustrating, thought I'd bricked it. So I re-flashed HSPL and this time a custom ROM and it was back up again.
Now I know that I should have flashed the stock ROM via ActiveSync and not SD card which would have left the HSPL intact. I will definitely remember that for the future
just remember that some people WANT to remove HSPL when installing a stock ROM - e.g. when returning device.
tbh it should have worked with stock ROM and sdcard as leoimg.nbh - it is the way listed in HSPL thread to uninstall after all!!! we dont always want to use customRUU!!!
As from the noob flashing thread
NOTE: The only way to remove the HSPL is to flash an original SPL from microSD card
* You can also use this method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
VIDEO TUTORIAL: [★] has made a YouTube video to walk people through flashing a Stock SPL via activesync. Find it *HERE*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse
Guys, I had reached the exact same issue with the NOT ALLOW problem. And people, we do read some times (the newbies) and nowhere but here you say that AFTER HSPL YOU MUST NOT UGPRADE FROM MEMORY CARD!!!! And NO it is not included inhere: http://forum.xda-developers.com/showthread.php?t=609477
Cheers,
and thanks to all the smart people inhere!
D
thug_life_inc said:
Guys, I had reached the exact same issue with the NOT ALLOW problem. And people, we do read some times (the newbies) and nowhere but here you say that AFTER HSPL YOU MUST NOT UGPRADE FROM MEMORY CARD!!!! And NO it is not included inhere: http://forum.xda-developers.com/showthread.php?t=609477
Cheers,
and thanks to all the smart people inhere!
D
Click to expand...
Click to collapse
With hspl installed you CAN flash CUSTOM roms using sd card, it is only flashing OFFICIAL roms through sd card that removes hspl.
sorry to crash this thread but...
i have flashed HSPL on to my HD2 and am now wanting to install HTC's new 1.66 rom.
i have a VF hd2 so i am a little worried i will hit the same issues as the OP did.
can some one hold my hand through flashing the ROM as im a complete noob to this.. i have read the FAQs and im a bit like with all the acronyms etc
adam_r said:
sorry to crash this thread but...
i have flashed HSPL on to my HD2 and am now wanting to install HTC's new 1.66 rom.
i have a VF hd2 so i am a little worried i will hit the same issues as the OP did.
can some one hold my hand through flashing the ROM as im a complete noob to this.. i have read the FAQs and im a bit like with all the acronyms etc
Click to expand...
Click to collapse
Use the custom ruu to flash it. Do not put the nbh on the sd. I quote from the "[HSPL]How to flash everything" thread:
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Why people cant read? refering to the person who started this thread.
No Problem Flashhing to 1.66 on a Voda HD2 with HSPL
I have a voda HD2 and being a total Newbie to the HTC / WM .. I followed the Dummie guide.. (thanx to all, for that.. fantastic..) installed HSPL..and then installed the latest 1.66 from the HTC site using a boggus serial number.. As actual would not let me download it. No problemo..
Feeling a bit more adventureous.. any suggestions for the best 'cooked Rom' ??
From my understanding, you can flash away Stock ROMS using activesync. No need for HSPL.
hi guys i have a very strange problem
after a week that i tried wp7 i decided to go back to wm + andro sd....
i already did other times and everything was going well...
i did task29 to install my usual energy rom...copied back my usual android rom backup...but...
Android dosnt load...its stuck at "htc page" for hours...i tryed different rom...tried the same build of my backup and nothing happens...
now i went back to wp7 and set for dual boot from maglar...always stucked at htc screen...
i really need andro for google maps until wp7 have his version...im going crazy!
anyone ever had the same problem?
i tryed different wm builds before try wp7 dual boot but always the same problem
with a fresh installation of android after 2 hours of wait (i was sleeping hehe) data.img isnt created...tried to put a fresh one from the stock rom but nothing
hoping my english is understandable i say "THANKS" to all for every suggestion
This isnt the questions forum this is the development forum.
uooops! i posted in the wrong tab hehe i have about 15 xda tab open at the same time...can i move this or only admins can?
Try This
xardus said:
hi guys i have a very strange problem
after a week that i tried wp7 i decided to go back to wm + andro sd....
i already did other times and everything was going well...
i did task29 to install my usual energy rom...copied back my usual android rom backup...but...
Android dosnt load...its stuck at "htc page" for hours...i tryed different rom...tried the same build of my backup and nothing happens...
now i went back to wp7 and set for dual boot from maglar...always stucked at htc screen...
i really need andro for google maps until wp7 have his version...im going crazy!
anyone ever had the same problem?
i tryed different wm builds before try wp7 dual boot but always the same problem
with a fresh installation of android after 2 hours of wait (i was sleeping hehe) data.img isnt created...tried to put a fresh one from the stock rom but nothing
hoping my english is understandable i say "THANKS" to all for every suggestion
Click to expand...
Click to collapse
I had the same issue. Try loading an official WM6.5 rom. Dont task29. Then load magldr, then CWM them flash build of choice. you should be fine.
Let me know if it works for you please.
nattyd said:
I had the same issue. Try loading an official WM6.5 rom. Dont task29. Then load magldr, then CWM them flash build of choice. you should be fine.
Let me know if it works for you please.
Click to expand...
Click to collapse
i will try this evening at pc...but im not very practice with short words...cwm stands for?
i have to task29 to go back from wp7 cos with new roms the update tool dsnt connect
CWM = ClockWorkMod
Instructions
xardus said:
i will try this evening at pc...but im not very practice with short words...cwm stands for?
i have to task29 to go back from wp7 cos with new roms the update tool dsnt connect
Click to expand...
Click to collapse
Hope this is helpful.
As Nick.C has pointed out CWM = ClockWorkMod Recovery. Im assuming this is the method you are using to flash your builds.
I did not mean for u not to use task29 at all. Follow the steps below and all should be well.
1. Task29 to remove Windows Phone 7
2. Flash official WM6.5 Build (DO NOT Task29)
3. Download and use SD Formatter 3.0 to format SD Card. Set option to Full Erase and Size adjustment to ON.
4. Install MGLDR 1.13
5. Flash CWM
6. Flash your favorite android build.
just to be sure...after flash official rom...i think i need to hspl before flash maglrd
i know i should read mag installation guide...but...im stuck in highway and im too lazy to find it hehehe
xardus said:
just to be sure...after flash official rom...i think i need to hspl before flash maglrd
i know i should read mag installation guide...but...im stuck in highway and im too lazy to find it hehehe
Click to expand...
Click to collapse
If you have flashed custom roms before, then you already have HSPL installed, because u cant flash custom roms without it. HSPL is always there until you remove it, even if you flash an official or custom rom.
To flash MGLDR - Boot into the boot loader screen (Multi Color Screen) and then flash MGLDR
To flash CWM - Boot into MGLDR and select usb flasher then flash CWM. Some chefs have there own custom CWM so read there instruction so u will know if you will use the original CWM or their version.
sd card block size?
Thread moved to Q&A.
hi guys i hvae flashed wp7 rom on hd2 tmo i have done every thing that is needed to run the wp7 but when ever i boot it stucks on htc logo boot screen please help
does any one has answer for it help guys i m waiting
Did you really follow everything step by step?
With the problem you describe, people usually forgot to flash the correct HSPL or Radio ROM.
It must be 2.08.HSPL and Radio ROM 2.15.50.xx, before installing MAGLDR 1.13.
Sometimes, incompatible SD cards make trouble, too.
tictac0566 said:
Did you really follow everything step by step?
With the problem you describe, people usually forgot to flash the correct HSPL or Radio ROM.
It must be 2.08.HSPL and Radio ROM 2.15.50.xx, before installing MAGLDR 1.13.
Sometimes, incompatible SD cards make trouble, too.
Click to expand...
Click to collapse
i tried but its still the same i tried flashing it with three diff memory card but it still stuck on htc boot screen
TMOUS?
If you've got the "other" (US 1024) HD2 you might have properly screwed your phone up
If you've got the European (512) non-TMOUS version then you've done something wrong on one of the steps. No more than pointers here though. You will have to search for yourself in the Development Pages.
1.HSPL
2.Correct Radio
3.MagLdr
4.ROM
In any case this Forum will help solve your issues.
stepthehen said:
If you've got the "other" (US 1024) HD2 you might have properly screwed your phone up
If you've got the European (512) non-TMOUS version then you've done something wrong on one of the steps. No more than pointers here though. You will have to search for yourself in the Development Pages.
1.HSPL
2.Correct Radio
3.MagLdr
4.ROM
In any case this Forum will help solve your issues.
Click to expand...
Click to collapse
i did every thing i m using tmo usa i did t9,hspl,correct radio,magldr,and try to install 3 roms all the roms stucking at boot screen i also tried to change the sd cards but still the same results i m try to solve it from past 3 days guys help me
Stickies
Read the stickies in development forum. I think you need seperate ROMs for TMOUS. Maybe also different HSPL, and MagLdr. I don't know what you flashed or what you should have flashed, so you need to read everything the people in the know have written.
Stuck on HTC screen as well!
I have tried it all!
Task 29, reinstall HSPL, reinstalled stock Winmo 6.5, reinstall MAGDLR 1.13, Radio 2.15, etc...
Stock 6.5 rom boots run fine.
Win 7 ROM install fine but then hangs on HTC screen forever! Been looking at it for 30 mins now!
This is highly annoying as everything was working fine last week!
Weirrrrrdddd.
Anybody got tips on this?
Peace.
This is on a EU HD2.
aesarius said:
I have tried it all!
Task 29, reinstall HSPL, reinstalled stock Winmo 6.5, reinstall MAGDLR 1.13, Radio 2.15, etc...
Stock 6.5 rom boots run fine.
Win 7 ROM install fine but then hangs on HTC screen forever! Been looking at it for 30 mins now!
This is highly annoying as everything was working fine last week!
Weirrrrrdddd.
Anybody got tips on this?
Peace.
This is on a EU HD2.
Click to expand...
Click to collapse
What version of HSPL did you install?
And about WP7, did you installed from the bootloader or MAGDLR USB Flash?
Hey @xsi!
Got 2.08.HSPL
Flashed WP7 through MAGDLR. Everything is going smooth, partitions ok but reboot stuck on HTC logo for ever!
Tried to reinstall Android through Clk no problems, Android boots fine and all, flashed WP7 through MAGDLR after but same thing happens!
Maybe a problem with Clk NAND partitions?
Cheers!
aesarius said:
Hey @xsi!
Got 2.08.HSPL
Flashed WP7 through MAGDLR. Everything is going smooth, partitions ok but reboot stuck on HTC logo for ever!
Tried to reinstall Android through Clk no problems, Android boots fine and all, flashed WP7 through MAGDLR after but same thing happens!
Maybe a problem with Clk NAND partitions?
Cheers!
Click to expand...
Click to collapse
No my friend i will go with sd card problem ... i had same problem it will stock at htc logo ... tried couple sd card 7 of them and i works with 1 gig sd card memory
Hey there!
I got some trouble while flashing my HD2 with Android. I processed after a step-to-step instruction using NAND Toolkit.
After i`ve installed the 3.03. HSPL i wiped it (task29).
Then i installed the Radio 2.15.50.14 ROM. At this point i think something went wrong:
The MAGLDR installation runs trough, but after that the MAGLDR Menu doens't shows up.
Can u tell me, where i made a mistake or how i can completely delete my HSPL-Version to start over?
Greets and thanks,
Pascal
Pazens said:
Hey there!
I got some trouble while flashing my HD2 with Android. I processed after a step-to-step instruction using NAND Toolkit.
After i`ve installed the 3.03. HSPL i wiped it (task29).
Then i installed the Radio 2.15.50.14 ROM. At this point i think something went wrong:
The MAGLDR installation runs trough, but after that the MAGLDR Menu doens't shows up.
Can u tell me, where i made a mistake or how i can completely delete my HSPL-Version to start over?
Greets and thanks,
Pascal
Click to expand...
Click to collapse
You need to flash HSPL 2.08, not 3.03.
Nigeldg said:
You need to flash HSPL 2.08, not 3.03.
Click to expand...
Click to collapse
I tried it before, but since then i always get the message, that the usb connection failed. So because of that i asked, if it is possible to delete the HSPL completely or change the version.
TY
Pazens said:
I tried it before, but since then i always get the message, that the usb connection failed. So because of that i asked, if it is possible to delete the HSPL completely or change the version.
TY
Click to expand...
Click to collapse
I think that you have to select run as administrator when right clicked the icon. Try that.
Shaumaaa said:
I think that you have to select run as administrator when right clicked the icon. Try that.
Click to expand...
Click to collapse
It says i got a bad SPL-Version, because i already flashed it to 3.03 HSPL. How can i remove that? Admin rights doesn't affect that.
reg
Flash original ROM via SD, you will have original SPL. Try to install HSPL then.
Marvlesz said:
Flash original ROM via SD, you will have original SPL. Try to install HSPL then.
Click to expand...
Click to collapse
How do i do that?
Pazens said:
How do i do that?
Click to expand...
Click to collapse
Not to be rude, but all of the information can be found via google or xda-search (you can find custom HD2 search by following the link in my sig.).
Edit:
To flash a rom from SD-card, download a compatible official winmo rom, rename .ruu to .zip and extract the .nbh file. Rename to LEOIMG.nbh, put it on the root of your SD card and boot.
To install HSPL, use the HD2ToolKit (google it) and use the "Install HSPL" option.
Marvlesz said:
Not to be rude, but all of the information can be found via google or xda-search (you can find custom HD2 search by following the link in my sig.).
Edit:
To flash a rom from SD-card, download a compatible official winmo rom, rename .ruu to .zip and extract the .nbh file. Rename to LEOIMG.nbh, put it on the root of your SD card and boot.
To install HSPL, use the HD2ToolKit (google it) and use the "Install HSPL" option.
Click to expand...
Click to collapse
I thought it would be that easy that it doens't take too long to give me a little instruction
Thanks for your help, i'll reply if it worked for me! =)
Pazens said:
I thought it would be that easy that it doens't take too long to give me a little instruction
Thanks for your help, i'll reply if it worked for me! =)
Click to expand...
Click to collapse
Yes, it's that easy to give YOU little instructions. But it becomes a PITA when everyone is asking for the same thing over and over.
Marvlesz said:
Yes, it's that easy to give YOU little instructions. But it becomes a PITA when everyone is asking for the same thing over and over.
Click to expand...
Click to collapse
Hm yeah right... obvious
So thanks btw, i hope it works, it's not my phone
Make sure not to flash a radio! Or else you might brick if you flash the wrong one
Hi there again!
Everything worked good so far, i got the standard SPL VErsion, flashed to 2.08 HSPL, was able to install MAGLDR and so on.
After installing a ROM now it stucks at the htc-Logo. For the repartion i used 250 MB system size and 45 mb cache. Could that be a problem?
And i supect another thing. The phone was telekom branded and bought in Germany, but i had to choose EU or Telekom US. I decided for Telekom US. Could this be the problem? I also read things about wrong SD-size but mine is 16 GB and should work fine...
So can you tell me what my problem could be?
Thanks
What ROM did you install?
You must repartition the NAND according to the ROM, not from your mind.
And are you sure the ROM doesn't require an sd-ext partition?
Did you choose the correct option (i.e. Nand, or NativeSD)
Tmo and Eu are basically: Tmo will install ALL to NAND, whereas EU will install some to NAND and some to SD.
I bought a used HD2 running CM10(NexusHD2-JellyBean v1.3a). I want to run WP7.8 on it so I looked up the ways to do that. Tutorials like http://forum.xda-developers.com/show...postcount=1193 say to flash a stock winmo6.5 rom before moving to WP7. I tried to do that by trying to flash RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2. 15.50.14_LEO_S_Ship. The normal RUU Updat Utility came up with lots or errors, but mostly connection or no response from device issues. So upon further reading i found out an alternate way to go about it by renaming the nbh and putting it in an sd card. I used 2GB microSD card and tried to flash it. But mid-way it stopped and upon reboot it said software update failed with a triangle. I went into the 3-color screen and there the message was present as well with two other messages microp led and microp touch. I tried the sd flash method again but it stopped by giving a not allow 00028002 error every time. I flashed HSPL 2.08.000 from the HSPL4 executable and Android booted up again.
i also tried RUU_Leo_S_TMO_UK_3.14.110.1_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship_2 but the same update error(266, i think) came up
Can i now go to a stock rom and then to WP7?
Thanks, in advance
Device details:
Boots with purple "stick together" logo(Weird, google search says this is tmobile america slogan yet this device is not US)
S/N:ht04anw01415
HTC HD2 T8585 P81100 (from the back)
Anyone?
follow the links below & your ready togo
mengfei said:
follow the links below & your ready togo
Click to expand...
Click to collapse
thanks for the reply but i want to go back to the stock rom which it seems i'm unable to do. i tried the usb flash and microsd flash methods with both RUUs. if i get to stock then i can proceed to wp7 with a clean slate. ATM i've flashed energy rom (Energy.Leo.29022.Sense2.5.Reference.Jul.05) with radio 2.15.50.14 in an attempt to see if doing this would help flash stock rom but no success.
IF you want WP7 no need to go back to stock ROM, I guess you haven't take a look at this link
http://forum.xda-developers.com/showthread.php?p=25781675#post25781675
once you have Magldr in your HD2, next steps would be easy as pushing a button
got windows phone 7.8 on it, thanks. But what if i want to later on return to stock rom? even when i was trying to wipe with task29 it was giving same error 266 and as of yet i haven't successfully flashed anything by the RUU method.
HD 2 Problems Win7
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5
Ralph79 said:
hi guys
Yesterday I tried to install HD2 WP7 ... and install a new Radio ROM my phone off, and since I did not start .... no reset button under the battery cover does not work .... it happened to anyone of you?? ... I had previously installed the official 6.5
Click to expand...
Click to collapse
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.
geforceonline said:
Nope but then again, i never had to flash another radio. Try to follow the tutorial in mengfei's signature and if it doesn't work create a separate thread for others to weigh in.
Click to expand...
Click to collapse
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.
Marvlesz said:
If you want stock windows mobile (with HSPL) > Use HSPL to flash windows mobile using the RUU.
If you want stock winmo AND stock spl > Install winmo using HSPL, then use HSPL package to uninstall HSPL (i.e. install stock SPL).
That's the only way I can think of since you're getting lots of errors doing anything without HSPL.
Click to expand...
Click to collapse
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.
geforceonline said:
I presume you're talking about the regular USB>3-color screen>RUU(on pc) method. Well, i've been doing that for stock roms and other stuff(splashes, etc.) too but i almost always seem to get error 266 update error.
Click to expand...
Click to collapse
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
geforceonline said:
.. I flashed HSPL 2.08.000 from the HSPL4 ..
Click to expand...
Click to collapse
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.
Marvlesz said:
If you don't have HSPL, you will get an error when trying to flash almost anything.
You said you flashed HSPL, but in fact you didn't
From HSPL4 you can flash the stock SPL, which is what you did. HSPL 2.08.0000 is stock SPL. With that, you can't do much.
You need 2.08.HSPL.
Try again and report back.
Click to expand...
Click to collapse
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266
geforceonline said:
I just tried the USB RUU(with WWE and TMOUK versions) method with 2.08.HSPL and it gave the same error 266
Click to expand...
Click to collapse
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.
Marvlesz said:
Try this easy fix:
http://forum.xda-developers.com/showthread.php?t=993472
To sum it up:
*Try a different port.
*Install ActiveSync/WMDC.
*If already installed, uninstall then re-install, or simply try a different computer if you have.
Click to expand...
Click to collapse
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm
geforceonline said:
have WMDC/Zune and drivers(also had activesync but deleted it because even then it didnt work)
tried all three ports
reinstalled it as well but unfortunatly no other pc is available atm
Click to expand...
Click to collapse
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.
Marvlesz said:
Well, I am sorry then. I am out of ideas; you have wait for other members with greater knowledge.
Edit:
Maybe the USB cable? Although I highly doubt it, there is no harm in trying. Try a different cable and see what happens.
Click to expand...
Click to collapse
well, thanks for trying!
edit: IT WORKED! I tried another cable and while recognizing the pc went to some qualcomm drivers that i used to have and reverted to htc ones and the RUU picked it up and the flashing commenced. Thanks a ton!