Well it started about 3 days ago.My phone can scan my WiFi connection but it cannot connect to it,if I select connect it will be connecting for a while but later will switch back to available.Sometimes it cannot even scan it,but rarely it will be connected but only stays for a few seconds.Then I realize other connection can work but only my connection will not work.Can someone explain the problem?
Related
My Cingular 8125 randomly drops my wifi connection while connected to my home wireless network. Problem did not really seem to start until after I connected once at starbucks to tmobile hot spot.
Please help
have you removed the starbucks settings?
you find it in "network cards" (strange place for it)
yes...i did.
I also have socket communication's wifi companion loaded on my device
prob not the reason, but i recently heard that if someone is trying to "borrow" your internet access.
http://www.wirelessdefence.org/Contents/Void11Main.htm
boots user off network, then you can grab packages as they try to reconnect.
Every Time I Try To Connect Via Wifi Then Goto Ie It Starts Up O2 Gprs & Will Not Load My Pages Cus I Am On Vodafone Help
I have had intermittant problems with tethering my laptop via an 8525 since the release of the att2.15 rom. sometimes it would work correctly, sometimes intermittantly, sometimes not at all. After trying numerous combinations of proxies on and off, and various connection settings, I have finaly isolated what i believe to be the problem. When my wifi adaptor is turned on, IE on the laptop appears to prefer to connect to the internet via wifi instead of the usb connection to my hermes device. I do not have an internet connection on the wifi router/hub at my home. Is there a simple explanation for this that one of you network gurus could educate me with? Does anyone else experience this?
There is no broadband access at my residence (rural area) other than satellite or cellular. The wireless router is functioning only as a network for several computers and printers at my home. It is a hassle to lose my tethering connection every time i need to access wifi to print, or get data from another machine.
Any info would be appreciated.
I attached poll because i wondered how often people are using this functionality.
mthomas,
I just flashed up to the 2.15 ROM last night. Internet Sharing would never stay running on my laptop. I had my wireless card active on the laptop as well. It worked fine before I updated the ROM.
Edit:
I turned off my wifi card and still have the problem. After a few minutes of internet sharing, my laptop cannot recognize the the phone.
Hello.
I have a question if anybody can help me.
I have a laptop connected to the internet. This laptop has built-in Bluetooth device. I also have a HTC touch dual phone.
I'd like to know, is there any possibility as the phone to use the laptop's internet connection via Bluetooth? (I mean, the phone to be connected to the computer via Bluetooth and using the computer's internet connection)
Thank you and any help is appreciated.
You could use a bluetooth activsync connection. (while connected via Activesync you should beable to access the internet.)
Could you please explain how to do it? I tried several times but did not work at all...
check this guide here - worked for me
http://www.geekzone.co.nz/content.asp?contentid=3163
Thank you. I will try today an seeif it is working for metoo... would be wonderful while Niki doesn't have WiFi...
I have a bluetooth activsync connection..when I use internet via bluetooth on my Touch Dual it works well, but after 10 minutes internet explorer says the connection is shut down, and i can't load web pages anymore.
But the connection with active sync is still up
It only works again if disconnect and connect again. Is this a Internet timeout or some..? Does someone know what to do about it.
Excuse me for my english
My problem is I dont even have internet connection when the device is connected to the PC via USB :-( Is there an option in activesync that you need to check to be able to do this?
Hello!
I have a huge problem with WMWifiRouter on my Kaiser. When I try to connect it with the computer (XP) and switch to USB-WiFI mode it doesnt work. Windows shows "this connection has limitedor no connectivity. you might not be able to access..." And on my Kaiser appears: Try to connect again later or input another IP adress(or so).
Pleas help me, I really need to have that USB to WiFi connection!
http://www.wmwifirouter.com/
have you read their faq?
I'm not sure if the program does what
you think it does
it's a program which connecting to the internet over umts
can be connected to by other wifi devices which can share the umts internet connection
Not only over UMTS! It shares the connection of the PC(from eg DSL), and works as a router over AdHoc connection. I know that it works, because i used it on another PC.
Any idea???
So I have WiFi setup at work and it seems to be working, albeit slow but working.
When I plug the phone into the laptop via USB to charge the phone, the wireless connection is no longer available.(START>SETTINGS>CONNECTIONS>WIFI)
However when I unplug the X2 from the micro USB, the icon comes back and I have a wireless connection.
Is there a setting that I need to adjust for USB connection?
Another question:
Before i connect to WiFi I see the E at the top right of the phone. When I connect to WiFi the E is replaced by the WiFi icon. So I am assuming that my E (EDGE) connection is NOT being used at all when WiFi is on?
In other words, when I am using WiFi, is the internet service from my cellular provider, T-Mobil, completely disconnected? And then when I disconnect from WiFi does the phone internet service go back on to T-Mobil?
Thanks,
xwing
For WIfi + USB, i will test it for you tonight at home,
As for Edge and Wifi, yes, when you are connected to wifi, your cellular data connection is not used anymore for internet connection (and actually why do you need it?) However if you connect your phone via USB and allow to use the internet connection from it, your data connection from your Cellular still active. It allows to differentiate the 2 active sync connections, as each connection has its own properties for which items to be synced. so i wonder why Wifi and USB is not...
So now I have had the device for over a week and find that after a while, 2-4 hrs or longer, the WiFi just does not work. I go to settings>connections> WiFi and I am told to enable WiFi on my device. Then there is a list of about 10 different connections to choose from.
The only way to connect to my WiFi is to turn off the phone and back on (waiting at least 2 min) for the phone to load up.
Any suggestions?