Related
I for the life of me cant figure out why my camera is completely dead! I have FULLY wiped all caches,everything under 'WIPE' via AMONS and even formatted my SD card as well as trying an alternate SD card(both 8GB--C6speed)--never had a problem w either card on ANY ROM...ALL OF A SUDDEN the past 2days my camera goes to a FULL BLACK SCREEN,when pressing the CAMERA icon. Occasionally the taskbar will remain uptop but will timeout when screen display shutsoff. Now if i launch CAMERA via DESIRE ROM(KING),ill get the notice about clicking trackball to resume camera but as soon as i click it,the message dissapears and the screen will go back to black screen again...and repeat. I SWEAR i have DONE MULTIPLE COMPLETE WIPES AND REFORMATS so im left to believe its THE HARDWARE itself! CAN ANYBODY PLEASE LEND ME A HAND IF the similar problemhas occured...On the Nandroid backups that ive restored from FULLY FUNCTIONING bkups,if i launch NEXUS TORCH it will say CANNOT ACCESS LED---this is THE ONLY info besides the "camera wake message"mentioned earlier that i can provide. Thanks in advance and pleas edont flame for NOT being in Q&A bc this is more of a DEV related restore question.
**oh and BTW--I DID TRY TO INSTALL the DESIRE R2 cam fix and does nothing. I tried it when all was working fine early in the week and it did nothing to help FLASH timing for me,so i NAN restored back to prior state and CAMERA continued working until about THURSDAY night--regardless--PHONE is in OUT OF BOX STATE--MINUS UNLOCKED and it STILL doesnt work!---PEACE and Happy Mothers Day to any Mothers out there in XDA world!
***Captain Obvious to the Rescue!!***
Your hardware has malfunctioned. Contact HTC for a repair.
1. you may have a broken camera, try a stock rom
2. your caps lock button is definitely broken
3. you posted in the wrong section
ghostrida said:
1. you may have a broken camera, try a stock rom
2. your caps lock button is definitely broken
3. you posted in the wrong section
Click to expand...
Click to collapse
1. i should have known you were from Philly and cant read--I TRIED STOCK ROM
2. CAPS is to put highlights on key terms so idiots dont read over the fact that I DID TRY STOCK ROM---see how that helps?
3. Thanks for your informative responses---any suggestions from CAPTAIN OBVIOUS how to get service on a ROOTED device without being charged full price on the phone?? Ahhh--thought not!--So i tried here to see if anyone else had similar situation. AGAIN-thanks for your help as well SERIAL TOON--geez
If it's a hardware failure they won't charge you.
I think it will help if you go through Google Cust service first...they will end up redirecting you to HTC repair. Provide all truthful information on your issue, proving that you have done some legitimate trouble shooting and they will realize that it is a hardware issue, not the ROM flashing or bootloader unlocking that caused the problem. Someone else on the xda forums had a rooted phone with bluetooth problem and was able to send to HTC for repair for free...with a 4 day turnaround!
Good luck!
What do you base this on...Heresay?
BlueScreenJunky said:
If it's a hardware failure they won't charge you.
Click to expand...
Click to collapse
I didnt intend to sound rude,im just a little pissed right now..I Only ask bc i already had an issue in January days after receipt of phone. Issue was solved by sending me a new battery bc other was causing random shutdowns (ive since forwarded this info to another XDAmember that had exact same issue and they give him replacement phone at 1st but issue continued to occur--i told him about my story after he posted his problem, he contacted them this weekend and confirmed with me today that a new battery was on the way..see my public IM's for info). Anyway,when i was dealing with the battery issue they said they would definately NOT be able to fix under warranty bc the phone is rooted and unlocked. I can attest to the few people on here that said theyve been successful in such cases,but either way,IVE ALREADY STATED that i tried the DESIRE R2 camera kernal to see if that helps,so im not going to be dishonest and tell them i havent tried anything other than custom roms. Again..positive suggestions or similar experiences with warranty info would be appreciated....trollers looking for a funny post or to degrade people can eat one!
joshlusignan said:
I think it will help if you go through Google Cust service first...they will end up redirecting you to HTC repair. Provide all truthful information on your issue, proving that you have done some legitimate trouble shooting and they will realize that it is a hardware issue, not the ROM flashing or bootloader unlocking that caused the problem. Someone else on the xda forums had a rooted phone with bluetooth problem and was able to send to HTC for repair for free...with a 4 day turnaround!
Good luck!
Click to expand...
Click to collapse
Thanks JOSH, ill look into it tommorrow--as i stated tho--i feel im being dishonest for trying the DESIRE R2 cam and saying that they should cover it---uninformed people will assume THAT couldve caused it,even though i used phone afterwards for a few days w no side effects
Hey Milton, like others have mentioned in here might want to try flash back to stock and seeing if the problem persists. If it does then your looking at a hardware problem and you should contact HTC/google for repair.
Yea...i was thinking that from get go--(hardware prob). Im on cheesy STOCK ROM right now and have been for cpl hrs...but its obvious its gotta be hardware...NOW comes the crappy part of trying to explain it to HTC when attempting to get an RMA!--Yee Haa!
MOD PLEASE CLOSE OR DELETE---THANKS!
Milton, among the items on the very small list of things folks around here want in return for helping you is that you lay off the caps. Doesn't highlight anything that you'd want to highlight.
Doug
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
milton007 said:
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
Click to expand...
Click to collapse
That seriously hurts my eyes to look at. Try using proper punctuation and grammar. It's very simple and still gets your point across.
As for your phone. Call Google which will probably have you call HTC. People have gotten their rooted devices fixed for free if it's a genuine hardware problem and nothing caused from the rooting process.
milton007 said:
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
Click to expand...
Click to collapse
You should send it to HTC for repair. Charging fee or not, but thats the only option to you right now because its a hardware failure.
mikroN1 said:
That seriously hurts my eyes to look at. Try using proper punctuation and grammar. It's very simple and still gets your point across.
Click to expand...
Click to collapse
I was thinking the exact same thing, don't know where he must have learned how to type. Then you criticize people from Philly, or whatever its called somewhere, for not knowing how to read. I would say mirror that advice and learn how to type.. type properly.
Torch will work until camera app is used then it wont work again until i reboot. After reboot, torch will work ONLY on regular/lower setting. MAX brightness will not work. Toggle back to LOW setting and torch will work again. Im going to try what DOUG suggested bc that is the only thing i havent tried yet...but the way torch and camera are acting up and requiring reboots keeps me willing to try software tricks first...WHAT ties the TORCH's HI setting to the camera app adn yet keeps the LOW setting seperate!??..ill try the TORCH dev real quick for some insight on how the two work hand in hand.Thanks for anyone using their time to help instead of criticize. Sorry for mocking ones ability to read but i was quite [email protected] time bc i lost a major function on my phone.My apologies to all
Seriously Milton? More?
milton007 said:
Please DONT lend assistance to someone like this. IF they cant bither to read THE MOST SIMPLEST instructions, they should NOT be attempting this in the first place...thats just sheer ignorance...
Click to expand...
Click to collapse
The attitude, hostility and the caps are not welcome here.
Along with the others I have no sympathy for you. Learn proper grammar and get a better attitude.
Troll much? Go tell your mother happy mothers day if you have that much time to pull up old posts from people asking questions in a 'kernal forum' about basics. Basics that anyone should know, if not they stand a much better chance on damging their phone. It wasnt being ignorant. Since you know everything there is to know about everyones posts, tell me where the topic dealing with my specific camera issue has been previously posted and ill be glad to read and search thru that forum. I wasnt the one asking questions about something mentioned in the OP (uh oh i used caps--oh geesh-someones gonna be saaad now!)and numerous pages before. Im sorry i dont spend all my life on forums to know that only words approved for caps are indeed CAPITALIZED. Petty little boy-and by the way, i was trying to stress your good advice by typing your name in caps so people would credit you with the help-Sorry to have taken your precious time sir. Good day.
The top part of the touchscreen is not working at all.
I can not drag the notification down, ect.
Anyone has this kind of problem or know how to fix it?
Gingerbread Problem
There are several posts on this it is caused by the faulty Gingerbread update no fix available yet. Thanks
you sure it's a software problem?
pagereborn said:
you sure it's a software problem?
Click to expand...
Click to collapse
I have a similar issue. Some users reported that Touchscreen Booster from the Marketplace helped. Give that a shot. It says its for the SGS but install it anyways, select "super optimized" and hit apply.
Unfortunately for me, it doesnt do a thing. I actually think I figured out whats causing my phone to screw up. Whenever its hot/humid outside, thats when it starts to glitch. For instance. I was watching a movie through the HDMI cable. The phone is overclocked to 1.3Ghz, so about 45 minutes in the phone was getting hot. It was in a Otterbox case as well which doesnt help. It randomly started showing the progress bar and disappearing. Once I took the case off, and let the phone sit for a bit it started to work fine again.
I have a new digitizer on order and hopefully that will fix the issues. Hopefully for you it isnt hardware like mine!
it doesnt work for me either.
I found out more spots are being unresponsive.
>.<
anyone?
Its a gingerbread issue
Check out the link below
http://www.google.com/search?q=ging...s=org.mozilla:en-US:official&client=firefox-a
z45123 said:
There are several posts on this it is caused by the faulty Gingerbread update no fix available yet. Thanks
Click to expand...
Click to collapse
WTF are you talking about, trolls ?
Read some more
http://www.droidforums.net/forum/dr...led-issues-lower-part-screen-sensitivity.html
I had this problem in my wifes Atrix. Sad to say, it was a hardware problem. No software fixed it. Replace it if you can while you are under warranty.
It sounds to me like it could be a digitizer problem
Sent from my MB860 using xda premium
Hello,
I'm hoping someone can shed some light into my delema...
I've been researching regarding my issue but haven't found any answers as of yet (I feel like I'm the only one with this annoying problem).
My problem happens more times then I would like. I would be browsing the web, watching a movie, or just on the desktop screen, then all of a sudden the screen starts wigging out on me. It would shift erratically left or right, zoom in and out in a spastic way and while all that is happening it doesn't respond to touch. The only way I would recover from it is if I hit the power button to close the screen then on again. That seems to remedy it temporarily until it decides to act up again at random times. My other issue besides that, is that touch would become unresponsive at times when just going through the motions. Turning the screen off and on again would fix it but will happen again a few more times during the day.
Has anyone ever have these problems and if so have you been able to remedy it? I may end up having to return it to Costco online and get it replaced.
Things I've tried: (Not in order)
- Removed root and set it back to stock.
- Hard reset.
- Flashed different rom
- Removed all third party apps
- Full wipe
(Thanks for reading)
jjdevega said:
Hello,
I'm hoping someone can shed some light into my delema...
I've been researching regarding my issue but haven't found any answers as of yet (I feel like I'm the only one with this annoying problem).
My problem happens more times then I would like. I would be browsing the web, watching a movie, or just on the desktop screen, then all of a sudden the screen starts wigging out on me. It would shift erratically left or right, zoom in and out in a spastic way and while all that is happening it doesn't respond to touch. The only way I would recover from it is if I hit the power button to close the screen then then on again. That seems to remedy it temporarily until it decides to act up again at random times. My other issue besides that is that touch would be unresponsive at times and turning the screen off and on again would fix it but will happen again a few more times during the day.
Has anyone ever have these problems and if so have you been able to remedy it? I may end up having to return it to Costco online and get it replaced.
Things I've tried:
- Removed root and set it back to stock.
- Hard reset.
- Flashed different rom
- Removed all third party apps
- Full wipe
(Thanks for reading)
Click to expand...
Click to collapse
If you've done a full wipe and format before flashing ROM, it very well could be a hardware problem, as the wipe and format should have removed all residuals of previous ROMs, so you can rule out OS/software as the issue.
Just an educated guess.
kjy2010 said:
If you've done a full wipe and format before flashing ROM, it very well could be a hardware problem, as the wipe and format should have removed all residuals of previous ROMs, so you can rule out OS/software as the issue.
Just an educated guess.
Click to expand...
Click to collapse
Sorry I didn't post what I did in order. Yes I've done full wipes before flashing any rom. Even as far as to bringing it back to stock and it would seem fine for a bit then out of no where it would just wig out on me.
You could be correct of it being a hardware issue... Sucks that I may end up having to return it.
Edit: Actually I haven't tried formatting. I will give that a go. Thanks!
Edit 2: Didn't work. Off to Costco I go for a refund:/ I may just decide on a different tablet.... Ipad2 maybe? LOL (Just kidding)
Hi JJdeVega: Have the same problem a day after i bought it and the problem was the touch sensor malfuntion. Returned and exchange to Costco with new one no more probs.
I am not sure why ,but lots of tablets that come from Costco seem to me have issues.or is it that they just sell more then anyone else.
I have similar issue but with font size shrinking to smaller then readable at times.ideally while browsing web forums.I have to close browser and start again.I believe it has to do with site adds changing.
jjdevega said:
Hello,
I'm hoping someone can shed some light into my delema...
I've been researching regarding my issue but haven't found any answers as of yet (I feel like I'm the only one with this annoying problem).
My problem happens more times then I would like. I would be browsing the web, watching a movie, or just on the desktop screen, then all of a sudden the screen starts wigging out on me. It would shift erratically left or right, zoom in and out in a spastic way and while all that is happening it doesn't respond to touch. The only way I would recover from it is if I hit the power button to close the screen then on again. That seems to remedy it temporarily until it decides to act up again at random times. My other issue besides that, is that touch would become unresponsive at times when just going through the motions. Turning the screen off and on again would fix it but will happen again a few more times during the day.
Has anyone ever have these problems and if so have you been able to remedy it? I may end up having to return it to Costco online and get it replaced.
Things I've tried: (Not in order)
- Removed root and set it back to stock.
- Hard reset.
- Flashed different rom
- Removed all third party apps
- Full wipe
(Thanks for reading)
Click to expand...
Click to collapse
Hey, that was my exact problem and just for u to know all the things u tried were software related and the problem really is hardware (or at least in my case) the touch screen has a malfunction in it but to make sure u can just download 'touch test' free from the market and leave it open for a while or when the problem shows and see for ur self its like invisible fingers are touching ur screen and that was to make sure that the problem is hardware related if so do as i did .. replace it
hope that i helped
If I helped u in a way or another click "Thanks"
very good
Well said good info on the program wish I knew before. Thanks for the info.:
Is it only when charging the device? If so, this happens to me too. I don't know if it's the tablet being faulty, or charger, or the power that's generated for my home, but it is VERY annoying. I can not use the tablet while charging. I can't return it now, as it's been maybe 3 months already? Anyway, just wanted to let you know that it could be only happening when charging.
sw6lee said:
Is it only when charging the device? If so, this happens to me too. I don't know if it's the tablet being faulty, or charger, or the power that's generated for my home, but it is VERY annoying. I can not use the tablet while charging. I can't return it now, as it's been maybe 3 months already? Anyway, just wanted to let you know that it could be only happening when charging.
Click to expand...
Click to collapse
if u have a warranty it doesn't matter how long u have been using it, i got mine replaced after three months use so u dont have to return it u can just ask ur agent for a replace because yours has got a problem in it ( if u do have an agent and warranty)
Press "thanks" if i helped u
Thanks everyone for all the suggestions and replies. I ended up returning it. Then found the Samsung Galaxy tab10.1 right next to the Acer, so purchased that instead. Kept it for another two weeks with no issues then came across the New Asus Transformer Prime tf201 and couldn't be any happier! Too bad Costco doesn't have it since it's all online pre order. I would totally take advantage of the 90 day return policy!
I am experiencing the same problem, but it is of a fairly random nature. it comes and goes. When I contacted J&R about it, they forwarded me to Acer customer service who ask me to send the device on my dime both ways, they would test it and decide if it qualifies for a replacement or if they send it back as is. Uhh, I am not happy. Anyone having similar experience?
Now I've read about a problem of the hd2 having digitizer problems and that only a replacement will fix the unresponsive touchscreen issue. But why is it that when I can get my touchscreen to work that it works flawlessly until it goes to sleep? Then i have to continually wake and swype and sleep over and over until it responds. It just seems very weird that after it wakes that it never seems to have a problem. I'm using the miui rom right now and have set the screen to never go to sleep. So I want to see how long it will go without this problem. Has anyone else seen this happening with their phone as well?
Make sure the kernel, and Rom are up to date.
I have that too on an AOSP Gingerbread rom. The screen is not unresposive per se but calibration seems off some times, strage for a capacitive screen.
ive had the problem with android before and there were a few different fixes ...
one fix was to turn off compatibility mode
another was kernel
ive also had the problem with wp7 ( nothing a few hard resets and patience couldnt cure )
either way good luck
well since my first post, i hadn't let the phone go to sleep once and it worked perfectly fine. so i decided to turn off compatibility mode and let it go to sleep.... and when i woke it and i slid my fingers down it actually worked. so far it's worked every time. why would compatibility mode mess up the touchscreen though?
i have NO earthly idea! just a little tidbit i picked from a dev. i would speculate but would end up looking and sounding foolish. so im going to quit while im ahead and have actually been of help :-D cheers
Where can i disable compatibility mode?
I get the same problem. I've used a ICS rom for a day or so and suddenly the lockscreen was unresponsive. I thought it was ROM problem, so I flashed Cyanogen 7, but the screen didn't respond as well... I flashed everything to stock (removing magldr and hspl) and the problem stayed... After several restarts the screen started to respond and now it works (sort of). The tricky thing is: sometimes when I go out from some app in android, the screen doesn't respond again. Locking and unlocking the screen fixes this, but only temporarily.
Did this ICS rom screw something (...hardware?!) or is it a pure coincidence that a few people encounters the same problem for the first time in such a short period of time...
And one more thing... my warranty expired 5 days ago... please help!!!
I had this same problem with my phone before my warranty expired; before I flashed any android roms on it, and while it still had stock WM6.5. I called HTC customer support and they had me send in the phone for repair. They replaced the digitizer and I haven't had the same problem since. It was wierd because in my mind is seemed like a software problem because it would respond nicely as long as the screen was unlocked and the instant it was locked the response was very crappy, sometimes it took forever to unlock my phone. So it might somehow be a hardware issue
WaspVL1
Machupichu2 said:
Where can i disable compatibility mode?
Click to expand...
Click to collapse
spare parts!
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
cmacia06 said:
I repair phone myself and i can say that i get A LOT of hd2's with this problem. For the most part it is the hardware because no matter what software you put on the phone it is just a matter of the luck you have to get it working. My hd2 broke 2 times b4 and it was always hardware. Htc must of messed up with the hd2 digitizer
Click to expand...
Click to collapse
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
well, it's been a few days and my phone still seems to be fine. it hasn't once locked up on me yet. i don't know why turning compatibility mode would fix this. or maybe the phones connectors were loose and are now miraculously back in at the same time i unchecked compaibility mode. the only bad thing was that this was happening the last couple weeks and i had given up and already ordered a sensation 4g. or well, guess i have 2 phones now
Its seems possible. Every since I replaced my digitizer with a non OEM one its has never failed on me again. And I hope it never does. There dam expensive.
rubledub said:
from what ive seen in photos of the leo mobo it looks like the connection for the screen/digitizer (not sure on hardware) is located right behind red end call/power button and from being mashed off,on,off,on,etc loosens/damages connection.
or is the hardware screen issue just a complete shot in the darks chance?
OH ... ive had the software issue (fixed as i mentioned earlier) AND unrepairable (with my limited tools and balls to physically tear into this badboy) hardware issues.
Click to expand...
Click to collapse
Sent from my HTC HD2 using XDA App
Compatibility Mode
I also have this issue, therefore I just recently flashed my hd2 with Tytung's 4.0 ICS Rom. As expected, this didn't help very much.. What I am now going to try before I send my phone to HTC is to disable compatiblity mode. BUT, I can't seem to find this compatibility mode check anywhere. Could someone please guide me there?
..
Windows 7
I will be flashing my phone with w7 now, to see wether this is an android kernel bug / softare issue or if this relates to hardware. I also see a lot of people saying that after fixing the digitizer it works again, so it might actually be a hardware issue. I will post my feedback when I have tried with w7.
Really weird.. Out of nowhere , the bottom right corner of my screen has become almost totally unresponsive to touch. The L and the backspace button on my keyboard are nearly unusable.. Anyone have any idea as to how I may be able to fix this? Its like there is a 2 inch by 1cm gap on my touch screen that doesn't respond to touch.. Thanks guys
Sent from my Nexus 4 using Tapatalk 2
Warranty exchange..
Wish I could... Bought the phone through tmobile and I'm getting the run around.
Sent from my Nexus 4 using Tapatalk 2
I have the same problem, but its a band across upper 1/3 of the screen causing weird typing and such, but only in portrait.
Sent from my Nexus 4 using xda app-developers app
Nexus 4 touch screen defect (dead zone, phantom touch)
I have the same problem, I have a permanent ~1cm tall dead zone spanning the width of my Nexus 4, right about the location of the SIM card tray.
On occasion it is not a dead zone, but rather a "very haunted zone" where there are MANY phantom clicks/drags on different areas of the dead zone in VERY QUICK SUCCESSION. When this happens I have found that constantly resetting the phone (maybe 5-6 times) until it returns to normal (see: dead zone) is the only way to fix it.
That whole situation can take up to an hour to sort out, especially since during the orgy of phantom clicks/drags on the dead zone, the touchscreen is essentially a write off and turning it off is next to impossible, meaning that my phone is bricked for a portion of the day. This happens arbitrarily about once every 5 days.
I purchased my phone from Australia one month ago. Was not aware of any problem until I had returned to where I am currently living in China. I'm absolutely gutted that my first android experience has soured, especially after shirking apple because of (living through years of) their own hardware/software issues.
Why can't I just have a quality, working piece of tech?
So far the warranty options available:
1) Store I bought it from says: Send it to LG Australia (1 non-international warranty)
2) Google says: No google store purchase number, no return
3) LG China? - Can't find any information about LG warranty claims in China.
If I send it back to Australia for repair I will be waiting without phone for weeks, AND I'll get taxed at least $100 by greedy China customs when the phone comes back in. (not to mention the postage there and back)
The problem has become worse and worse as have used the phone. Can any of ye android bros possibly offer any sort of advice or even better, a fix, for solving this problem?
tobiakazmer said:
I have the same problem, but its a band across upper 1/3 of the screen causing weird typing and such, but only in portrait.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I have this right now. It's about a third of an inch located near the middle of the screen. It spans the entire width of the screen.
I sure hope it's just a software and not a hardware issue. I bought this in the US and I am now halfway around the world.
I had the same problem. For me it was right where the middle row of keys on the keyboard are or where the ring is on the lock screen.
5mm thick bar across the screen. I sent it back to be fixed and it's been fine ever since touch wood.
They replaced the entire screen on mine. This is definitely a hardware issue. I did a factory reset before I sent it back and the problem was still there.
Digitiser is too close to surface I think causing problems.
Sent from my Nexus 4 using xda app-developers app
Guys i have the same problem since this morning.
I tried everything change roms 4.3 / 4,4 and finally returned to stock.
Nothing worked although i had never the same problem before.
So i tried my last chance. Changed radio image with the help of a Toolkit of our forum ( thanks N-Cry Toolkit )
It seems to be fixed for now , i just rebooted.
Hope it will be ok and you could fix yours too
Hey!
denpeirazei said:
Guys i have the same problem since this morning.
I tried everything change roms 4.3 / 4,4 and finally returned to stock.
Nothing worked although i had never the same problem before.
So i tried my last chance. Changed radio image with the help of a Toolkit of our forum ( thanks N-Cry Toolkit )
It seems to be fixed for now , i just rebooted.
Hope it will be ok and you could fix yours too
Click to expand...
Click to collapse
This really worked for you?
em.faris said:
This really worked for you?
Click to expand...
Click to collapse
Well it worked. I cant understand the reason yet but it keeps showing after some time. I m trying changing roms / baseband / bootloader and return to stock trying to identify when it doesnt work and why. It's really annoying and i m tired of it.
denpeirazei said:
Well it worked. I cant understand the reason yet but it keeps showing after some time. I m trying changing roms / baseband / bootloader and return to stock trying to identify when it doesnt work and why. It's really annoying and i m tired of it.
Click to expand...
Click to collapse
well for me its a hardware issue, but since you said it worked fine when you changed the baseband it really surprised me up
actually happy, cuz there are many users who has this problem.
do keep us updated when you find your fix for this. will be of much help may be in future if something goes wrong on my N4
em.faris said:
well for me its a hardware issue, but since you said it worked fine when you changed the baseband it really surprised me up
actually happy, cuz there are many users who has this problem.
do keep us updated when you find your fix for this. will be of much help may be in future if something goes wrong on my N4
Click to expand...
Click to collapse
Had the same touch screen issue for months; had a dead spot in the middle of the screen that would interfere with browsing and games.
Updated OTA to stock KitKat just last week and the problem went away. Hope you guys get lucky as well. :cyclops:
Possible Deadzone fix!
capcanuck said:
Really weird.. Out of nowhere , the bottom right corner of my screen has become almost totally unresponsive to touch. The L and the backspace button on my keyboard are nearly unusable.. Anyone have any idea as to how I may be able to fix this? Its like there is a 2 inch by 1cm gap on my touch screen that doesn't respond to touch.. Thanks guys
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Ok... i created an account here because ive had this same problem for the past month at least, but I think i found a fix. It may take a few people to try it as well to see if its definitive.
I have the same 1cm high deadzone spanning the width of my device just lower than halfway from the top.
My troubleshooting led me to this: If its hardware, its only because the software is telling it something it shouldnt be. I'm sure nothing is broken (i.e., from being dropped, etc.) Something is wrong, for sure, but not broken per se.
I took screen shots of temperature and voltage (using CPU-Z app) trying to figure it out. I paid attention to when it happened and when it did not. I boiled it down to two possibilities: temperature and/or voltage (i can explain how i came to this conclusion if you want... would take a bit more explanation).
I charge my phone with the charger plugged into the wall typically. I live in asia so the voltage is a lot higher (but within the appropriate range of the phone). Yet, lately when i go to sleep, I plug my phone into my laptop to charge, rather than the wall... when i wake up the problem isnt there. About 2 hours later or so the problem comes back.
I tried this for a week (charging my phone with my laptop) and the problem is dissipating. As quickly as it escalated (getting gradually worse) it is now getting gradually better.
Try it and see if it works for you. At night when your phone is nearly dead, charge your phone with your USB port attached to your laptop. Try this for a few days. Maybe it will help. Im still troubleshooting specifics to see if it is definitive.
UPDATE: today, the day of writing this, i haven't had the problem at all and it's been nearly 7 hours and the 3rd consecutive night of charging with USB on my laptop.
Nexus 4 - 4.4.2
My dead zone appeared post-Lollipop update
I created an account for the purpose of also reporting this "dead zone" issue.
I elected, on the Tuesday before Thanksgiving, to opt into the OTA Lollipop update. During the process of updating, I noticed my battery drained all the way to 0, while I thought nothing of it.
When the update was complete, I started to notice a dead zone in the middle of my screen when in portrait mode.
Actually, my dead zone spans an inch of my screen.
I have performed several hard resets, soft resets, learned about the ADK & adb, and downgraded all the way to 4.2.
I took the phone, this morning, to a cell repair shop and the technician said that it's not a hardware issue (although I'm not sure he's right).
So, that's my story. If I find a solution, I'll post it.
these dead spots IMO , are because of bad battery or bad charging ...
have any of you facing these issues have used any wall charger other than the default nexus 4 LG charger ?? maybe ur battery was not charged the way its suppose to be .. or maybe ur battery is getting bad.. can sm1 with the problem replace the battery and see if the problem get solved ???and u can try charging it from the original lg charger for 12hrs straight .. it may(temporary) fix the problem /...
Any new ideas for this post? Or is it dead.
Shubhamqweasd said:
these dead spots IMO , are because of bad battery or bad charging ...
have any of you facing these issues have used any wall charger other than the default nexus 4 LG charger ?? maybe ur battery was not charged the way its suppose to be .. or maybe ur battery is getting bad.. can sm1 with the problem replace the battery and see if the problem get solved ???and u can try charging it from the original lg charger for 12hrs straight .. it may(temporary) fix the problem /...
Click to expand...
Click to collapse
i could try the battery replacement on my nexus, when i get the time, ill get back to you if it works....
ok got the dreaded dead spot where the sim card is, i can't unlock my phone. i dont have usb debug enabled, i can push/pull files in recovery but not much more.
ive tried to change the dpi to move the pattern away from the dead zone by editing build.prop manually and pushing it to the phone but cm13 doesn't seem to take the change to build.prop so the dpi is stuck at 320.
now, im trying to set up usb otg and unlock my phone using a wired mouse and y-cable. but quanta doesn't have otg for marshmallow enabled out of the box and i dont have root access to enable it in an app.
is there a file that i can edit and push to the phone to enable otg_hack?
techparkour12 said:
i could try the battery replacement on my nexus, when i get the time, ill get back to you if it works....
Click to expand...
Click to collapse
Did you ever try this?
buffering.... said:
Did you ever try this?
Click to expand...
Click to collapse
i did it, battery has nothing to do with the screen, its better to just replace it.