I for the life of me cant figure out why my camera is completely dead! I have FULLY wiped all caches,everything under 'WIPE' via AMONS and even formatted my SD card as well as trying an alternate SD card(both 8GB--C6speed)--never had a problem w either card on ANY ROM...ALL OF A SUDDEN the past 2days my camera goes to a FULL BLACK SCREEN,when pressing the CAMERA icon. Occasionally the taskbar will remain uptop but will timeout when screen display shutsoff. Now if i launch CAMERA via DESIRE ROM(KING),ill get the notice about clicking trackball to resume camera but as soon as i click it,the message dissapears and the screen will go back to black screen again...and repeat. I SWEAR i have DONE MULTIPLE COMPLETE WIPES AND REFORMATS so im left to believe its THE HARDWARE itself! CAN ANYBODY PLEASE LEND ME A HAND IF the similar problemhas occured...On the Nandroid backups that ive restored from FULLY FUNCTIONING bkups,if i launch NEXUS TORCH it will say CANNOT ACCESS LED---this is THE ONLY info besides the "camera wake message"mentioned earlier that i can provide. Thanks in advance and pleas edont flame for NOT being in Q&A bc this is more of a DEV related restore question.
**oh and BTW--I DID TRY TO INSTALL the DESIRE R2 cam fix and does nothing. I tried it when all was working fine early in the week and it did nothing to help FLASH timing for me,so i NAN restored back to prior state and CAMERA continued working until about THURSDAY night--regardless--PHONE is in OUT OF BOX STATE--MINUS UNLOCKED and it STILL doesnt work!---PEACE and Happy Mothers Day to any Mothers out there in XDA world!
***Captain Obvious to the Rescue!!***
Your hardware has malfunctioned. Contact HTC for a repair.
1. you may have a broken camera, try a stock rom
2. your caps lock button is definitely broken
3. you posted in the wrong section
ghostrida said:
1. you may have a broken camera, try a stock rom
2. your caps lock button is definitely broken
3. you posted in the wrong section
Click to expand...
Click to collapse
1. i should have known you were from Philly and cant read--I TRIED STOCK ROM
2. CAPS is to put highlights on key terms so idiots dont read over the fact that I DID TRY STOCK ROM---see how that helps?
3. Thanks for your informative responses---any suggestions from CAPTAIN OBVIOUS how to get service on a ROOTED device without being charged full price on the phone?? Ahhh--thought not!--So i tried here to see if anyone else had similar situation. AGAIN-thanks for your help as well SERIAL TOON--geez
If it's a hardware failure they won't charge you.
I think it will help if you go through Google Cust service first...they will end up redirecting you to HTC repair. Provide all truthful information on your issue, proving that you have done some legitimate trouble shooting and they will realize that it is a hardware issue, not the ROM flashing or bootloader unlocking that caused the problem. Someone else on the xda forums had a rooted phone with bluetooth problem and was able to send to HTC for repair for free...with a 4 day turnaround!
Good luck!
What do you base this on...Heresay?
BlueScreenJunky said:
If it's a hardware failure they won't charge you.
Click to expand...
Click to collapse
I didnt intend to sound rude,im just a little pissed right now..I Only ask bc i already had an issue in January days after receipt of phone. Issue was solved by sending me a new battery bc other was causing random shutdowns (ive since forwarded this info to another XDAmember that had exact same issue and they give him replacement phone at 1st but issue continued to occur--i told him about my story after he posted his problem, he contacted them this weekend and confirmed with me today that a new battery was on the way..see my public IM's for info). Anyway,when i was dealing with the battery issue they said they would definately NOT be able to fix under warranty bc the phone is rooted and unlocked. I can attest to the few people on here that said theyve been successful in such cases,but either way,IVE ALREADY STATED that i tried the DESIRE R2 camera kernal to see if that helps,so im not going to be dishonest and tell them i havent tried anything other than custom roms. Again..positive suggestions or similar experiences with warranty info would be appreciated....trollers looking for a funny post or to degrade people can eat one!
joshlusignan said:
I think it will help if you go through Google Cust service first...they will end up redirecting you to HTC repair. Provide all truthful information on your issue, proving that you have done some legitimate trouble shooting and they will realize that it is a hardware issue, not the ROM flashing or bootloader unlocking that caused the problem. Someone else on the xda forums had a rooted phone with bluetooth problem and was able to send to HTC for repair for free...with a 4 day turnaround!
Good luck!
Click to expand...
Click to collapse
Thanks JOSH, ill look into it tommorrow--as i stated tho--i feel im being dishonest for trying the DESIRE R2 cam and saying that they should cover it---uninformed people will assume THAT couldve caused it,even though i used phone afterwards for a few days w no side effects
Hey Milton, like others have mentioned in here might want to try flash back to stock and seeing if the problem persists. If it does then your looking at a hardware problem and you should contact HTC/google for repair.
Yea...i was thinking that from get go--(hardware prob). Im on cheesy STOCK ROM right now and have been for cpl hrs...but its obvious its gotta be hardware...NOW comes the crappy part of trying to explain it to HTC when attempting to get an RMA!--Yee Haa!
MOD PLEASE CLOSE OR DELETE---THANKS!
Milton, among the items on the very small list of things folks around here want in return for helping you is that you lay off the caps. Doesn't highlight anything that you'd want to highlight.
Doug
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
milton007 said:
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
Click to expand...
Click to collapse
That seriously hurts my eyes to look at. Try using proper punctuation and grammar. It's very simple and still gets your point across.
As for your phone. Call Google which will probably have you call HTC. People have gotten their rooted devices fixed for free if it's a genuine hardware problem and nothing caused from the rooting process.
milton007 said:
Okay,,,this is weird!!..My TORCH hadnt been working at all either, the whole time ive had the camera problem. Now ,the torch will work for ONE TURN ON, then if i launch CAMERA, the cam still doesnt work. i have to HOME and HOME only to get back to home screen..BACK ARROW does nothing except vibrate,indicating touch response. If i then re-launch TORCH, it doesnt work....!??SOMETHING is ODD--and im split whether its hardware- or some sorta SYSTEM file that stays stuck even after all STOCK FLASHES and everything!--again,reminder..the LED TORCH hadnt worked up until this point--unit has NEVER been dropped,slid out of pocket from 1foot high onto superthick carpet,so i doubt its a loose internal cable...Hmmm...
Click to expand...
Click to collapse
You should send it to HTC for repair. Charging fee or not, but thats the only option to you right now because its a hardware failure.
mikroN1 said:
That seriously hurts my eyes to look at. Try using proper punctuation and grammar. It's very simple and still gets your point across.
Click to expand...
Click to collapse
I was thinking the exact same thing, don't know where he must have learned how to type. Then you criticize people from Philly, or whatever its called somewhere, for not knowing how to read. I would say mirror that advice and learn how to type.. type properly.
Torch will work until camera app is used then it wont work again until i reboot. After reboot, torch will work ONLY on regular/lower setting. MAX brightness will not work. Toggle back to LOW setting and torch will work again. Im going to try what DOUG suggested bc that is the only thing i havent tried yet...but the way torch and camera are acting up and requiring reboots keeps me willing to try software tricks first...WHAT ties the TORCH's HI setting to the camera app adn yet keeps the LOW setting seperate!??..ill try the TORCH dev real quick for some insight on how the two work hand in hand.Thanks for anyone using their time to help instead of criticize. Sorry for mocking ones ability to read but i was quite [email protected] time bc i lost a major function on my phone.My apologies to all
Seriously Milton? More?
milton007 said:
Please DONT lend assistance to someone like this. IF they cant bither to read THE MOST SIMPLEST instructions, they should NOT be attempting this in the first place...thats just sheer ignorance...
Click to expand...
Click to collapse
The attitude, hostility and the caps are not welcome here.
Along with the others I have no sympathy for you. Learn proper grammar and get a better attitude.
Troll much? Go tell your mother happy mothers day if you have that much time to pull up old posts from people asking questions in a 'kernal forum' about basics. Basics that anyone should know, if not they stand a much better chance on damging their phone. It wasnt being ignorant. Since you know everything there is to know about everyones posts, tell me where the topic dealing with my specific camera issue has been previously posted and ill be glad to read and search thru that forum. I wasnt the one asking questions about something mentioned in the OP (uh oh i used caps--oh geesh-someones gonna be saaad now!)and numerous pages before. Im sorry i dont spend all my life on forums to know that only words approved for caps are indeed CAPITALIZED. Petty little boy-and by the way, i was trying to stress your good advice by typing your name in caps so people would credit you with the help-Sorry to have taken your precious time sir. Good day.
Related
I got my blackstone yesterday. Excitedly opened it up, fiddled with it a while, and flashed a new rom. It was a while before i realised that the phone woudlnt vibrate. Im pretty sure its a hardware fault, but just wanted to check here to make sure I havent missed something.
The phone wont vibrate, even when being called / txted with vibrate mode on. I also understand the hardware buttons are sposed to have some kind of haptic feedback or minivibrate, but this doesent work either.
I searched through all the settings, and couldnt find any magical turn on vibrate feature buttton. Vibrate notification is definately turned on, and so is the vibrate profile. I inittialy installed Panoshas Black Pearl rom. I tried a hard reset, and then also flashed the Dutty rom, and finally the original rom to see if it that worked.
Can anyone point out an obvious mistake ive made? Or am I gonna have to send my lovely blackstone back?
Thnx in advance.
Hmmm...you've already tried flashing a new rom and if you still have the same problem, send it in. It's still spanking new, shouldn't be a problem getting it rectified....or better yet ....replaced!
Was it vibrating when you recieve it, on it's original ROM ?
sectorlord said:
Was it vibrating when you recieve it, on it's original ROM ?
Click to expand...
Click to collapse
I only noticed that it wasnt after I flashed the rom, so altho im fairly certain i dont remember it ever vibrating, i cant be absolutely certain.
[email protected] said:
Hmmm...you've already tried flashing a new rom and if you still have the same problem, send it in. It's still spanking new, shouldn't be a problem getting it rectified....or better yet ....replaced!
Click to expand...
Click to collapse
thnx for your response, i think ill probably do that.
its pretty annoying to have to send it back already lol, but its worth it to have a working vibrate.
A Second Opinion
Yep, I got my Blackstone a week ago today and it vibrated just fine out the box. I have not flashed any new ROMs, but I have installed plenty of programs including .net 3.5 and mobilmagic button stuff and hd tweak, installed and uninstalled advanced config and a few keyboards, the list goes on. Long story short, my vibrate doesn't work either! I think this is due to my tampering with it though, I really do. Also, I saw another post where someone had the same problem, he ended up getting his to work after playing with .net 3.5, hard resetting more than once and soft resetting too. So try that, let me know what you find out! I plan to hard reset and flash new ROMs soon, so I figured maybe these problems would go away then. Oh and, anybody else have a problem where their end key doesn't end the call, ? This is such a tinkerer's toy, lol!
Probably a good warning about flashing ROMs! Did you backup your original ROM? I think you will need to restore your original ROM before you send it back for "repair". (Otherwise it is likely you will be charged for any work/replacement - justifiably!)
Before you despair, what ROM did you flash it with? Have you contacted the developer about it? It may be a setting in a tweak you don't know you've installed. Have you tried playing Tweeter (the vibration feedback when the ball collides with a wall will indicate a working/non-working vibrator).
Rather than just offer bad news to you and tell you it's your own fault, here is a helpful tut on How to backup ROM, albeit a little late maybe. It may not be all doom and gloom - some kind soul may be able to offer you their backup ROM (particular to your mobile provider) which you can use to restore it to factory default before testing for the vibrate and/or sending it back for a fix. Who is your provider and what original ROM do you need?
blacksage said:
Yep, I got my Blackstone a week ago today and it vibrated just fine out the box. I have not flashed any new ROMs, but I have installed plenty of programs including .net 3.5 and mobilmagic button stuff and hd tweak, installed and uninstalled advanced config and a few keyboards, the list goes on. Long story short, my vibrate doesn't work either! I think this is due to my tampering with it though, I really do. Also, I saw another post where someone had the same problem, he ended up getting his to work after playing with .net 3.5, hard resetting more than once and soft resetting too. So try that, let me know what you find out! I plan to hard reset and flash new ROMs soon, so I figured maybe these problems would go away then. Oh and, anybody else have a problem where their end key doesn't end the call, ? This is such a tinkerer's toy, lol!
Click to expand...
Click to collapse
thanks for the tip. i fiddled with .net framework 3.5 and more hard resets, and altho i have installed hdtweak and advconfig a couple times, ive done multiple clean flashes without them and it still dont work. in fact - as i said above, im 90% sure it never did work, so im convinced its a hardware fault.
i hope yours wroks after a rom flash, but i think mine is gonna have to go back...
Nerdino said:
Probably a good warning about flashing ROMs! Did you backup your original ROM? I think you will need to restore your original ROM before you send it back for "repair". (Otherwise it is likely you will be charged for any work/replacement - justifiably!)
Before you despair, what ROM did you flash it with? Have you contacted the developer about it? It may be a setting in a tweak you don't know you've installed. Have you tried playing Tweeter (the vibration feedback when the ball collides with a wall will indicate a working/non-working vibrator).
Rather than just offer bad news to you and tell you it's your own fault, here is a helpful tut on How to backup ROM, albeit a little late maybe. It may not be all doom and gloom - some kind soul may be able to offer you their backup ROM (particular to your mobile provider) which you can use to restore it to factory default before testing for the vibrate and/or sending it back for a fix. Who is your provider and what original ROM do you need?
Click to expand...
Click to collapse
yeah - i definately played tweeter even before flashing any roms, and there was no vibrate - so i guess that proves it really is the hardware.
i bought my phone from mobilephonesdirect, but have my rom backed up, so should be ok.
ta for the offer tho.
Mine was the opposite, it wouldn't stop vibrating, even when switched off.
You had to take the battery out to get it to stop.
mikemod said:
Mine was the opposite, it wouldn't stop vibrating, even when switched off.
You had to take the battery out to get it to stop.
Click to expand...
Click to collapse
lol - i will trade?
You could try and use TouchResponse. That program gives a vibration response with every touch on the screen. If not, indeed send it in.
Regards,
shthpnz said:
You could try and use TouchResponse. That program gives a vibration response with every touch on the screen. If not, indeed send it in.
Regards,
Click to expand...
Click to collapse
thnx for the response.
sadly ive tried that as well and no dice...
im pretty sure I have the same problem
hey, I have the same problem and hard resetting and all that didn't help. Where did you buy yours, think they came from the same place? Are you sending back to HTC, how quickly did they say they could fix it and send it back?
Thanks
blacksage said:
hey, I have the same problem and hard resetting and all that didn't help. Where did you buy yours, think they came from the same place? Are you sending back to HTC, how quickly did they say they could fix it and send it back?
Thanks
Click to expand...
Click to collapse
got mine from
mobilephonesdirect.co.uk
havent been able to get throught them on the phone yet.
ill keep you updated if you want.
I appreciate that
yes I would love for you to keep me updated, I purchased mine through ebay from addictedtophones.com, which is out of California. They seemed like nice people but they sure aren't wanting to help my broken vibrate after only 8 days! That is just sad my friend. I have also contacted UK and US support and HTC global repair service. They have indicated that they are looking in to it. Apparently the US section may not have the resources to work on the device. I requested that they replace the phone, if they couldn't work on it ASAP, the person seemed to agree and put the request forward. I hope that helps your situation. I spent too much for a broken stone!
Levi
updated
I received my new replacement Touch HD in the mail a little bit ago, it vibrates. It must have been a hardware issue best I can tell. I just about had to send it off to HTC, but I finally got the retailer to replace it. It actually took a lot of crap just to get HTC USA GLOBAL repair center to want to accept the idea but, I called UK HTC and they called HQ in Taiwan or somewhere and got something done. So if you need some help, Ive got a few contacts that can help, anyone can just let me know. I hope this doesn't become a widespread infection.
blacksage
I'd say it's probably a hardware issue. My first HD also didn't vibrate, and had to exchange for a new one. Probably some issues with one of the batches.
mikemod said:
Mine was the opposite, it wouldn't stop vibrating, even when switched off.
You had to take the battery out to get it to stop.
Click to expand...
Click to collapse
Had the same problem...now we're at least two with this prob. Still waiting for the replacement...
@All,
As a celebration for my 1000th post, I decided to open a new thread based on Tweakman's idea, which seemed to work very well in the Development and Hacking Section. The idea is simple, a single thread for all Questions, Problems, and Concerns regarding Blue Angel. This includes, but it is not limited to:
[highlight]*Problems with Flashing.[/highlight]
Can't get your device in bootloader? Did it freeze during flashing and now it doesn't get past the 4 colored screen? Are you a complete noob and need some guidance as to how to flash? Etc.
[highlight]*Have questions about which Rom is best?[/highlight]
[highlight]*Want to install software but don't know if it is compatible with your BA[/highlight]
You get my point. All the questions that I have seen/answered over the past couple of months are just repetitions of posts, threads, and things that are readily available on the wiki or in other threads. However, people are either lazy, don't know what a Wiki is / where to find it, or just flat out don't know how to search (or read the forum rules for that matter). Having something general (in this case a sticky) that says "Hey, if you have a question, you can ask here" should draw enough attention and start minimizing the number of new threads and posts opened by users (both new and seasoned). This way, we will be able to keep the development threads a little cleaner and smaller... hence making the site's search function work a little better in the process.
@Seniors,
Kinda like the Q&A team, I will need your help in trying to keep the influx of questions to a certain level by answering them as we see them. None of us are logged in 24/7 (or at least some of us aren't ), but if you guys see a question, please try to answer it. I know that xplode, Chef_Tony, markanthonypr, red_hanks, sun_dream, imatrix, +Que_PPC, motisu, and others normally try to keep this under control, but if we centralize it and contain it, we will have a cleaner forum.
Reserved for future use.
Post Stickied Per Request...
Siemens SX66 BlueAngel Q&A, Help
You know very well you can count on us. Great idea mate. Also congrats on your 1,000's post. I've added a few "tags" to the thread. I hope some others do the same to. Tags help users to find what they are looking for when they use search.
hi
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
homam_france said:
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
Click to expand...
Click to collapse
Hey homam,
Thanks for kicking things off
First of all, which OS were you having problems with? This is important because it could have been a bug in a rom that could have been fixed in a later version.
@mark,
I know I can count on you, buddy I need help from the mods as well though. I cannot redirect posts to here and/or close threads
My BA, keeps turning on from standby, by a light shock! I maen, if you press the Power button, and then you knock gently on it's back, it turns back on!!
I've set to "Lock all buttons except the power button", However, I still have this issue.
Well, I must confess that once it dropped off of my hand, and it's the result of that...
Any ideas?
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
If there was only a way to hack the hardware and make this work at least on Edge. I can live with everything else, but its a shame paying for a full unlimited Internet service and only getting G connection Sighhhhhhh
Ok, I had to let that frustration out !!!!!!
Chef_Tony said:
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
Click to expand...
Click to collapse
Wow! Tony! I really appreciate your complete answer. I mean it.
Yes, as you correctly assumed, I meant wake-up. It just wakes up and continues the routine WinMo operation; no soft-reset occurs.
It's less than a year that I've replaced the battery with a new one. I remember all the funny things used to happen when the old battery was dying. But non of them were similar to this one.
It can't be the Camera. Well, I'm able to use it all the time, and the "camera_detect" has been always loaded in the processes whenever I've checked it. About the looseness thing, ummm, I'm not sure. I tried to knock on it to see if it's more sensitive than other parts. I think the upper part of the device is more likely to wake it up by an easy hit (like knocking). but it's the whole upper part, not only the camera section nor the camera button.
Unfortunately, the software possibility, is unlikely to be the problem:
I've used many ROMs on my lovely BA which 3-4 times of them taken place since the wake-up problem.
The software and the usual reasons you counted, do wake it up. but shakes, too.
Finally, to be honest, I'm agree with you! This is the first Blue Angel with accelerometer. yeaaah! I did it!
I bet my friends that I can wake my BA up, without touching any buttons or screen! It's fun this way, but I comes to be annoying when I put it in my pocket or just put it on a table! and it wakes up... consider the forced battery consumption, unwanted screen taps if I don't lock the screen. God bless A_C! and... .
I know it's a hardware issue (((((
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
markanthonypr said:
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
Click to expand...
Click to collapse
Hey mark!
I had that same issue a while back, but with only one screw (also from the same area as yours).
@raizaM
Just to knock off Chef_Tony's theory out of the table completely, try to erase camera_detect.lnk from \Windows\startup and SR your device. If Chef was right, then your issue might be gone. However, I would follow markanthony's advice and take it apart in case Chef's idea doesn't work.
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
markanthonypr said:
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
Click to expand...
Click to collapse
Well, it kept me entertained when my BA would run out of juice
Thanks for your kind advices.
Actually, I tried to remove "camrea_detect" from the startup once, but any way, I gave it a shot again... no success...
Frankly, I'm a lil bit afraid to take my lovely BA apart... :-s... What if... :-(
But, I guess sooner or later I need to do so. so what the heck... lets do it.
Maybe I'll do it tonight. Guys please help me through it. I don't wanna loose my Angel!
Ton'y link provided in the previous posts, would be my start:
http://www.land-of-kain.de/ppc/mda3/disassembly/
any more advices?
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
loryshoe said:
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
Click to expand...
Click to collapse
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
markanthonypr said:
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
Click to expand...
Click to collapse
egzthunder1 said:
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
Click to expand...
Click to collapse
not the setting, it got black scren, its dead screen after running wifi or application, suddenly goes dead, black screen,.
Have you tried with another battery? It sounds to me like your battery is about to die. It won't hold the heavy battery consumption of Wi-Fi and heavy CPU usage while on Games. Try with another battery. Also make sure you followed Egzthunders suggestion to change your Power Settings. If you still need help, post back and include more info about your device, such as, what version of Windows are you running and how old/new is your battery.
Hello all and thanks in advance for the help.
I just got a refurb Hero from Sprint a couple weeks ago. I Rooted with Z4Root and started trying out Roms. I had just went from CM 6.2 to 6.1. Had everything working fine until my screen would stop coming out of hibernate mode. I would have to reset the phone to get the screen back on. It has gradually gotten worse (over the course of one day). Now when I reset the phone I might get the screen to turn on 1 out of 40 times, but the screen is now all messed up even when it does turn on now. I cant figure anything out other than to answer a call because I know where the slider is supposed to be on the screen for answering calls, so if someone calls I cant see anything I just swipe the screen and it answers fine.
Any ideas what might be causing this issue? Would it be a harware issue?
Thanks again
Yea I would try a different download you might have gotton a bad one. Also you should try a different rom after a full wipe. If that didn't work then I would say its a hardware issue.
Something.About.Me.U.Don’t
Like.Its.Cool.I.Understand.
.AWAH.
Thanks for the reply. I did nandroid back to every previous backup I had. Now I cant get the screen to turn on at all so, Im guessing its hardware. taking it to Sprint Today, we'll see what they say.
Thanks again
Yup, They replaced the screen and I'm back in business!
Swwet, glad to hear it man now enjoy more xda
Something.About.Me.U.Dont.Like
Its.Cool.I.Understand.
.AWAH.
I was just wondering if there was something to do with installing different roms that could have cause the screen to go out? I am thinking not, but I am new to the whole rooting and rom-ing thing. Is it possible that something I did caused the screen to go out?
Na I doubt it. Hardware usually is the manufacturers fault or user error. Unless you droped it, banged it up real bad or flashed a gsm radio your good. And a screen issue such as yours is most def not a rom issue.The rom dev's on here are solid. And XDA is a well known and respected site. If you need any help with anything just let me know.
Something.About.Me.U.Dont.Like
Its.Cool.I.Understand.
.AWAH.
cool thanks for the response. I was just worried that maybe I messed it up somehow. Glad that was likely not the case
Hello,
I'm hoping someone can shed some light into my delema...
I've been researching regarding my issue but haven't found any answers as of yet (I feel like I'm the only one with this annoying problem).
My problem happens more times then I would like. I would be browsing the web, watching a movie, or just on the desktop screen, then all of a sudden the screen starts wigging out on me. It would shift erratically left or right, zoom in and out in a spastic way and while all that is happening it doesn't respond to touch. The only way I would recover from it is if I hit the power button to close the screen then on again. That seems to remedy it temporarily until it decides to act up again at random times. My other issue besides that, is that touch would become unresponsive at times when just going through the motions. Turning the screen off and on again would fix it but will happen again a few more times during the day.
Has anyone ever have these problems and if so have you been able to remedy it? I may end up having to return it to Costco online and get it replaced.
Things I've tried: (Not in order)
- Removed root and set it back to stock.
- Hard reset.
- Flashed different rom
- Removed all third party apps
- Full wipe
(Thanks for reading)
jjdevega said:
Hello,
I'm hoping someone can shed some light into my delema...
I've been researching regarding my issue but haven't found any answers as of yet (I feel like I'm the only one with this annoying problem).
My problem happens more times then I would like. I would be browsing the web, watching a movie, or just on the desktop screen, then all of a sudden the screen starts wigging out on me. It would shift erratically left or right, zoom in and out in a spastic way and while all that is happening it doesn't respond to touch. The only way I would recover from it is if I hit the power button to close the screen then then on again. That seems to remedy it temporarily until it decides to act up again at random times. My other issue besides that is that touch would be unresponsive at times and turning the screen off and on again would fix it but will happen again a few more times during the day.
Has anyone ever have these problems and if so have you been able to remedy it? I may end up having to return it to Costco online and get it replaced.
Things I've tried:
- Removed root and set it back to stock.
- Hard reset.
- Flashed different rom
- Removed all third party apps
- Full wipe
(Thanks for reading)
Click to expand...
Click to collapse
If you've done a full wipe and format before flashing ROM, it very well could be a hardware problem, as the wipe and format should have removed all residuals of previous ROMs, so you can rule out OS/software as the issue.
Just an educated guess.
kjy2010 said:
If you've done a full wipe and format before flashing ROM, it very well could be a hardware problem, as the wipe and format should have removed all residuals of previous ROMs, so you can rule out OS/software as the issue.
Just an educated guess.
Click to expand...
Click to collapse
Sorry I didn't post what I did in order. Yes I've done full wipes before flashing any rom. Even as far as to bringing it back to stock and it would seem fine for a bit then out of no where it would just wig out on me.
You could be correct of it being a hardware issue... Sucks that I may end up having to return it.
Edit: Actually I haven't tried formatting. I will give that a go. Thanks!
Edit 2: Didn't work. Off to Costco I go for a refund:/ I may just decide on a different tablet.... Ipad2 maybe? LOL (Just kidding)
Hi JJdeVega: Have the same problem a day after i bought it and the problem was the touch sensor malfuntion. Returned and exchange to Costco with new one no more probs.
I am not sure why ,but lots of tablets that come from Costco seem to me have issues.or is it that they just sell more then anyone else.
I have similar issue but with font size shrinking to smaller then readable at times.ideally while browsing web forums.I have to close browser and start again.I believe it has to do with site adds changing.
jjdevega said:
Hello,
I'm hoping someone can shed some light into my delema...
I've been researching regarding my issue but haven't found any answers as of yet (I feel like I'm the only one with this annoying problem).
My problem happens more times then I would like. I would be browsing the web, watching a movie, or just on the desktop screen, then all of a sudden the screen starts wigging out on me. It would shift erratically left or right, zoom in and out in a spastic way and while all that is happening it doesn't respond to touch. The only way I would recover from it is if I hit the power button to close the screen then on again. That seems to remedy it temporarily until it decides to act up again at random times. My other issue besides that, is that touch would become unresponsive at times when just going through the motions. Turning the screen off and on again would fix it but will happen again a few more times during the day.
Has anyone ever have these problems and if so have you been able to remedy it? I may end up having to return it to Costco online and get it replaced.
Things I've tried: (Not in order)
- Removed root and set it back to stock.
- Hard reset.
- Flashed different rom
- Removed all third party apps
- Full wipe
(Thanks for reading)
Click to expand...
Click to collapse
Hey, that was my exact problem and just for u to know all the things u tried were software related and the problem really is hardware (or at least in my case) the touch screen has a malfunction in it but to make sure u can just download 'touch test' free from the market and leave it open for a while or when the problem shows and see for ur self its like invisible fingers are touching ur screen and that was to make sure that the problem is hardware related if so do as i did .. replace it
hope that i helped
If I helped u in a way or another click "Thanks"
very good
Well said good info on the program wish I knew before. Thanks for the info.:
Is it only when charging the device? If so, this happens to me too. I don't know if it's the tablet being faulty, or charger, or the power that's generated for my home, but it is VERY annoying. I can not use the tablet while charging. I can't return it now, as it's been maybe 3 months already? Anyway, just wanted to let you know that it could be only happening when charging.
sw6lee said:
Is it only when charging the device? If so, this happens to me too. I don't know if it's the tablet being faulty, or charger, or the power that's generated for my home, but it is VERY annoying. I can not use the tablet while charging. I can't return it now, as it's been maybe 3 months already? Anyway, just wanted to let you know that it could be only happening when charging.
Click to expand...
Click to collapse
if u have a warranty it doesn't matter how long u have been using it, i got mine replaced after three months use so u dont have to return it u can just ask ur agent for a replace because yours has got a problem in it ( if u do have an agent and warranty)
Press "thanks" if i helped u
Thanks everyone for all the suggestions and replies. I ended up returning it. Then found the Samsung Galaxy tab10.1 right next to the Acer, so purchased that instead. Kept it for another two weeks with no issues then came across the New Asus Transformer Prime tf201 and couldn't be any happier! Too bad Costco doesn't have it since it's all online pre order. I would totally take advantage of the 90 day return policy!
I am experiencing the same problem, but it is of a fairly random nature. it comes and goes. When I contacted J&R about it, they forwarded me to Acer customer service who ask me to send the device on my dime both ways, they would test it and decide if it qualifies for a replacement or if they send it back as is. Uhh, I am not happy. Anyone having similar experience?
I already trouble shot it with Google but I figured I would ask here as most of you know more than they.
I already did a factory reset 3 days ago because I deleted a file I shouldn't have. But now it has come down to them recommending me do another and then getting back if it still persists.
The problem is when I turn my screen back on I see white spots all over the screen for 2-3 seconds. I can't imagine why, or even why a factory reset is going to fix.
I have NEVER dropped (cross fingers) or got it wet, and truthfully have no idea how to tell and wouldnt want to begin taking the back off.
I am most certain there is no water damage
So I have tried:
Switched Wallpapers
Turned phone off then on
Switched from Apex to Launcher
Still there. I am posting a pic below. If anyone could help I would be most grateful.
Again you prolly know more than most of their employees
One time when I had a problem, but eventually got fixed, this is what I was told, they will do an advanced replacement, BUT I have to pay $350, then get it back when they get and verify the phone I send
I am not working so would not be able to do that. I suppose I could switch to my phone of choice I have here and just send it in?
Or I was told contact LG where there is no downpayment needed.
In either case, back then I was told there was stock for this type of situation, now I am told they no longer have any? You have any idea when they will catch up
THANKS for even taking time to read this, and even more if you can help
Eric
Hi
eric0668 said:
I already trouble shot it with Google but I figured I would ask here as most of you know more than they.
I already did a factory reset 3 days ago because I deleted a file I shouldn't have. But now it has come down to them recommending me do another and then getting back if it still persists.
The problem is when I turn my screen back on I see white spots all over the screen for 2-3 seconds. I can't imagine why, or even why a factory reset is going to fix.
I have NEVER dropped (cross fingers) or got it wet, and truthfully have no idea how to tell and wouldnt want to begin taking the back off.
I am most certain there is no water damage
So I have tried:
Switched Wallpapers
Turned phone off then on
Switched from Apex to Launcher
Still there. I am posting a pic below. If anyone could help I would be most grateful.
Again you prolly know more than most of their employees
One time when I had a problem, but eventually got fixed, this is what I was told, they will do an advanced replacement, BUT I have to pay $350, then get it back when they get and verify the phone I send
I am not working so would not be able to do that. I suppose I could switch to my phone of choice I have here and just send it in?
Or I was told contact LG where there is no downpayment needed.
In either case, back then I was told there was stock for this type of situation, now I am told they no longer have any? You have any idea when they will catch up
THANKS for even taking time to read this, and even more if you can help
Eric
Click to expand...
Click to collapse
Can't imagine what sort of hardware issue or fault would cause that, it looks like some sort of effect done by software.
You need to reset your phone and go back to the stock ROM (if not already using that) and then see if it still does it, I suspect it will not.
Regards
Phil
So this was present before the factory reset 3 days ago? If not then do it again
Sent from my Nexus 4 using Tapatalk 2
PhilipL said:
Hi
Can't imagine what sort of hardware issue or fault would cause that, it looks like some sort of effect done by software.
You need to reset your phone and go back to the stock ROM (if not already using that) and then see if it still does it, I suspect it will not.
Regards
Phil
Click to expand...
Click to collapse
Thanks to everyone, as you were responding, my friend Macky (maybe you know him LOL) suspected it had to be software/app because it showed up on the screen shot. So he said it wasnt hardware
I reset again and no problem
Thanks
lets say it wasn't the app, what could have caused it. (btw I dont root so dont know all the basics you prolly do) Just simple things like the computer that get messed up??