Database Users

[Q] Alfs for GingerDX!Help

hello for everyone.
i have a problem that i can´t resolve,i install GingerDX v19 and flashed Alfs for GingerDX and intall Update-Vold and wiped cache but my phone stuck in freexperia logo.when i wipe cache i receive some error that say"cache partition can´t be found".
i have xperia x8 E15i with baseband 015.
i see other users with the same problem.
my question is,what should i do to make phone boot properly?
someone please help.
thanks

I've installed GingerDX on LinuxDX kernel, then flashed Alf's kernel, and without wiping or doing anything just after Alf's kernel flash I've got to the CWM (right after flash... on first boot after) and installed Vold-update zip.
Phone booted normally, swap is working and default clock is 710MHz...
Try to:
1)Flash LinuxDX
2)Install GingerDX
3)Flash Alf's kernel
4)On first boot do not let system to boot... Enter CWM and install Vold-update, then reboot...

i go try this now.i reply your solution soon.thanks

filipsworks said:
I've installed GingerDX on LinuxDX kernel, then flashed Alf's kernel, and without wiping or doing anything just after Alf's kernel flash I've got to the CWM (right after flash... on first boot after) and installed Vold-update zip.
Phone booted normally, swap is working and default clock is 710MHz...
Try to:
1)Flash LinuxDX
2)Install GingerDX
3)Flash Alf's kernel
4)On first boot do not let system to boot... Enter CWM and install Vold-update, then reboot...
Click to expand...
Click to collapse
i do exactly your method but my phone still stuck on boot.i already try flash other kernel and install other rom but with no luck.always stuck on boot.
thanks

trying with clean rom, the onlyone case why got boot loop is unormal baseband[from my experience] so flashing with baseband 15 repeatly... then do like filipsworks said.. and good luck

cuecak said:
trying with clean rom, the onlyone case why got boot loop is unormal baseband[from my experience] so flashing with baseband 15 repeatly... then do like filipsworks said.. and good luck
Click to expand...
Click to collapse
thanks for your reply.
i do what you sad but with no luck.i install other baseband,stock rom and other baseband and other rom,again and again but my phone still stuck at freexperia logo.

its happen to me too.. after flashing from gingerxperia rom.. keep me stuck on boot loop,,, but i still have luck mybe.. try find some body posting for baseband 015[many baseband 015 but i thing some is diferent].. i forget whos posting here..try from blagus post.. here

Update to Alfs v02, it fix that bug for me.
sorry for my bad english

the problem is solved with the new update of Alfs kernel.everything is work just fine.
thanks for all reply.

Is GDX faster than GCR?
My GCR scores: http://forum.xda-developers.com/showpost.php?p=19241076&postcount=30

rav3n_pl said:
Is GDX faster than GCR?
My GCR scores: http://forum.xda-developers.com/showpost.php?p=19241076&postcount=30
Click to expand...
Click to collapse
Maybe... I got 64 FPS on 729 Mhz

when i see that kernel working i installed gingercruzt rev 8.1.but first i delete some modules in system/lib/modules then flash the rom and vod update and i think that is the most smooth 2.3 rom.i install gingercruzt because that rom with stock kernel is very stable,fast in heavy games and the best battery combination and have a beautifull theme.

velnens123 said:
Maybe... I got 64 FPS on 729 Mhz
Click to expand...
Click to collapse
Nice one:>,btw,you have synaptics or cypress?:d.And it's worth to flash the new kernel?
Sent from my X8 using XDA Premium App

Doubt

I am using the rom Brazil retail2.3.6 have d2 and recovery boot menu working, my question: Can I install roms and miui CM7 normally?
Thanks
Sorry for my google translante
Sent from my A953 using xda premium

no you cant install rom with kernel of this 2.3.6 rom BR
but some day it will change.
ps.: Before ask, search at forum

As far as I know, you can still use Argen2Stone, the Cyanogenmod 7 from Endless7 and Cyanogenmod 9. There's no MIUI for GB kernel, so you can't install it.

Bricked
MaxK47 said:
As far as I know, you can still use Argen2Stone, the Cyanogenmod 7 from Endless7 and Cyanogenmod 9. There's no MIUI for GB kernel, so you can't install it.
Click to expand...
Click to collapse
Endless CM7 ROM installed, did all the procedure correctly but when the recovery Reinier it simply appears the Endless logo Rom and is fully off, the boot menu also does not start
D2Recovery boot menu and I was working properly
WHAT can be?

Which EndlessCM7 ROM you install? I think the only newest ones are compatible with GB kernel.
You have to flash the sbf 2.3.6 again and later try to install the latest rom available.

EndlessCM7 can be used.

[Q&A] About Roms,Recoveries,Kernels and...

Recently I installed a custom rom (oxygen) on my Huawei X5 (U8800H) for first time and it was so easy therefore I have some questions before flashing another rom:
1. What is the difference between installing rom and force upgrade? (not in the method)
2. If I make a force upgrade (official GB for example) why I can't return to the stock rom simply by formatting the system and restore the backup rom?
3. Does the rom I want to install depend on the stock rom? If yes, How?
4. What is the best JB rom for IDEOS X5 that it is suitable for daily usage? (I have searched JB roms but I didn't find any stable rom)
5. If I flashed a rom customized for another phone on my U8800, does this brick it?(whether it is working or not)
6. If I flashed a kernel customized for another phone on my U8800 or a kernel with a version dosen't customized for the rom, does this brick the phone? Or can I change the kernel if it didn't work?
7. What is the directory of kernal's files? and dose it came with some roms? (zip rom)
In the stock rom the kernel version is 2.6.32.9-perf [email protected] #1 but in oxygen it is 2.6.32.9-perf [email protected] #221 dose this mean there is something changed in the kernal?
8. Roms like ICS dzo's Aurora require official update to GB , is it necessary if I flashed official GB kernal or any same version kernel?
If you can answer any question of those above, I'll be very grateful. Thanks.

Ill answer the questions i can:
3: it depends on the kernel. Froyo(2.2?) have 3.0 and gingerbread have 3.5, so you can only install 3.0 roms on a froyo phone and 3.5 roms on a gingerbread phone.
4: It isnt any stable JB roms yet but for ICS dzo's Aurora is very stable and mosterras Elora is said to be very stable to even tho i havent tryed it yet.
5: yes, it will brick if you flash a rom for another phone.

It also depends on the flavor of U8800 (plain, Pro or -51). We really need a sticky post about this at the top of this forum.

Yeah, I totally agree with you there. It's something its really easy to get wrong.
Sent from my U8800 using Tapatalk 2

theminikiller said:
3: it depends on the kernel. Froyo(2.2?) have 3.0 and gingerbread have 3.5, so you can only install 3.0 roms on a froyo phone and 3.5 roms on a gingerbread phone.
4: It isnt any stable JB roms yet but for ICS dzo's Aurora is very stable and mosterras Elora is said to be very stable to even tho i havent tryed it yet.
Click to expand...
Click to collapse
See Q.8 and the others if you can.
Thanks a lot.

custom rom
The best is custom rom not official roms

In the official CWM 5.0.2.6 recovery I installed oxygen rom and every thing was normal but their is a problem with the official CWM recovery. When I want to restore a previous backup for the same rom or the sock one, this appears:
Code:
Checking MD5 sums...
MD5 mismatch!
1.Must I change the recovery?if yes,which one must be installed?
2.Is every rom have its customized recovery?

Mahdial said:
In the official CWM 5.0.2.6 recovery I installed oxygen rom and every thing was normal but their is a problem with the official CWM recovery. When I want to restore a previous backup for the same rom or the sock one, this appears:
Code:
Checking MD5 sums...
MD5 mismatch!
1.Must I change the recovery?if yes,which one must be installed?
2.Is every rom have its customized recovery?
Click to expand...
Click to collapse
2. Gingerbread roms use 5.0.2.6 recovery and ICS roms use 5.5 (and 2 more numbers) recovery. So it only depends on the base of the rom you are flashing.

theminikiller said:
2. Gingerbread roms use 5.0.2.6 recovery and ICS roms use 5.5 (and 2 more numbers) recovery. So it only depends on the base of the rom you are flashing.
Click to expand...
Click to collapse
Can I try different recoveries (.img) to see which one would work? or it may harm the device?
Thanks
Sent from my u8800 using xda app-developers app

I don't think it will help changing the recovery if you are you using the same recovery for r restoring as you did when you made it, but I don't think it will harm you're device.
Sent from my U8800 using Tapatalk 2

Take a look on this http://forum.xda-developers.com/showthread.php?t=1802198
And see if it has a relation with my problem.
Thank you.
Sent from my u8800 using xda app-developers app

Hi
Is it possible to install the official gingerbread kernel on a gingerbread ROM like CM7.2 or OXYGEN? Can this speed up the phone?
♥♡♥♡♥♡♥♡♥♡♥♡♥♡
★HUAWEI IDEOS X5 U8800H★
♥♡♥♡♥♡♥♡♥♡♥♡♥♡

Mahdial said:
Hi
Is it possible to install the official gingerbread kernel on a gingerbread ROM like CM7.2 or OXYGEN? Can this speed up the phone?
♥♡♥♡♥♡♥♡♥♡♥♡♥♡
★HUAWEI IDEOS X5 U8800H★
♥♡♥♡♥♡♥♡♥♡♥♡♥♡
Click to expand...
Click to collapse
Any answer?!!!!
★HUAWEI IDEOS X5 U8800H★

[Q] Do anyone know what is the usage of kernel-milestone2-uk_2.2.1-froyo from tezet

After intalling CM10 by tezet, I find that I still prefer the CM7 by tezet. So I decide to install CM7 instead CM10. But when I installed CM10, I installed kernel-milestone2-cn-2.3.4-4.5.3.
So my question is that whether I need install kernel-milestone2-uk_2.2.1-froyo before installing CM7?
Thanks in advance.

same question here hope some one could shed some light.
before i went to cm10 i was on stock froyo though 2.2.

You should be able to flash CM7 with that chinese kernel you flashed, just remember to do a full backup and full wipe, you're downgrading.
Get the 2.2.1 UK kernel and put it in your SD card, just in case something goes wrong even if you get into bootloops you should be able to get to the bootmenu.
If you still cannot get into bootmenu, recover your phone with an SBF.
Good luck

zjuerkzhang said:
After intalling CM10 by tezet, I find that I still prefer the CM7 by tezet. So I decide to install CM7 instead CM10. But when I installed CM10, I installed kernel-milestone2-cn-2.3.4-4.5.3.
So my question is that whether I need install kernel-milestone2-uk_2.2.1-froyo before installing CM7?
Thanks in advance.
Click to expand...
Click to collapse
Yes, you need to instal this kernel, else you stuck on boot logo. It looks like new CM7 builds doesn't contains kernel.

zjuerkzhang said:
After intalling CM10 by tezet, I find that I still prefer the CM7 by tezet. So I decide to install CM7 instead CM10. But when I installed CM10, I installed kernel-milestone2-cn-2.3.4-4.5.3.
So my question is that whether I need install kernel-milestone2-uk_2.2.1-froyo before installing CM7?
Thanks in advance.
Click to expand...
Click to collapse
although someone has answered you question,I wanna answer that again.
Yes,you mus install it before installing CM7.Kernel is most important. The whole system is complied with special kernel Version.

benitoxu said:
although someone has answered you question,I wanna answer that again.
Yes,you mus install it before installing CM7.Kernel is most important. The whole system is complied with special kernel Version.
Click to expand...
Click to collapse
I didn't include kernel not on purpose Will fix this next time...

I'm with the same question so correct me if i'm wrong,
For all who want to downgrade from cm10 to cm7 and are using CH-GB kernel have to:
1 - flash Froyo Kernel
2 - flash latest cm7
3 - install gapps
My question is, can I install this kernel by "install from zip" mode?

Stuck in The Bootlogo After Flashing A Ro PLS Help

Hi Guys ,, i Am Not A Noob At First " im Trying Every Rom in XDA But When When i Tried The COD Rom i've Liked Because i'ts lite And Minimal But i've Gotten Bored of it So i Looked For Another Rom And That Was Creeds Rom 3.5 i've Heards it'll Be Good One So i've Downloaded and Took A Backup For Cod Rom Via CWM And Flashed Creeds i Didn't Liked it So Mush So i've Restored My Back Up Again Then After Some Days Saw The Cyanogen Democracy Tried To Flash But Stuck On The Boot Logo i've Got This Problem Before But i've Passed it By Odin And Did The Same Here Restored Orignal Rom Then Restored The COD Backup i SAW The Orignal Cyanogen Tried To FLash But Same Problem Then Restored The COD
The Problem Here How i Can Fix This Issue
PS
My Phone is Now Working By The Backup i Made Through CWM But When i Try To Install Any ROM Stuck on Boot Logo What Can i Do
Regards.​

U mean u flashed the real cyanogen? ! Not even the ported one? ?
____________________________
Hit thanks if I helped you..

EatHeat said:
U mean u flashed the real cyanogen? ! Not even the ported one? ?
____________________________
Hit thanks if I helped you..
Click to expand...
Click to collapse
Unofficial Cyanogen 7 What Should i Do Now

iDuc said:
Unofficial Cyanogen 7 What Should i Do Now
Click to expand...
Click to collapse
u flashed maroc-os' unstable cm7
flash whitexp's stable cm7
U FLASHED THE WRONG CM7

Inorder TO Run Cm7 U hve to hve A compatible Kernel lIke White Kernel etc.
So Flash kernel.
If U still Hve Problem Than
flash Stock ROM Via Odin.
Just Follow The Steps given In the Link
www.yhdgames.blogspot.com/2012/07/flash-stock-rom-on-galaxy-ywith-odin.html?m=1

The Problem is Not Here i've Tried DIANXIN OS But Same Results
ROM

D_Rising_Pheonix said:
Inorder TO Run Cm7 U hve to hve A compatible Kernel lIke White Kernel etc.
So Flash kernel.
If U still Hve Problem Than
flash Stock ROM Via Odin.
Just Follow The Steps given In the Link
www.yhdgames.blogspot.com/2012/07/flash-stock-rom-on-galaxy-ywith-odin.html?m=1
Click to expand...
Click to collapse
i've Flashed Stock ROM And Tried To Flash DIANXIN OS But Same Problem

maybe the ROM wud have locked ur partition.... meaning not letting u switch between ROMS without Repartitioning....try google for that