Related
I'm more and more concerned about the quality of the NookColor due to countless complaints about the display and charging issues.
I have NC on order and it makes me nerves since I'm not located in US
Did you have to replace your NookColor ?
PLEASE PEOPLE VOTE, even if you have nothing to say to get large sample of users to see if this is real problem
THANKS
107 votes now and about 30% failure rate is very bad Looks like it is not unusual to return the device several times. Shame on the manufacturer to have this kind of quality control!
Yes, I had to replace my NC (Christmas gift) within the first 2 days. However, it was due to a sound issue - also discussed on several websites - and it couldn't have been an easier process. My local B&N said that of the hundreds of NCs they'd sold, mine was only the 2nd exchanged. I think that's a pretty safe ratio. My new one has had no quality issues at all. Given that I've had to replace PCs, smartphones and other electronics for quality issues, this doesn't seem too out of the norm.
I've had to replace mine as well. First due to sound issues. Now the piece of plastic around the "N" button isn't completely flush with the screen. I'm not taking it back for that reason because the rest of the hardware is fine. I do, however, have to get a new NC cable since the one i have now won't charge my NC. If it's not one thing, it's another.
Had to replace mine too, xmas gift, due to screen quality. There was a lot of light leaking along the bottom edge and a dead pixel. Super fast and easy, even transfered the extended warranty right over to the new serial. New NC is perfect so far.
Those with sound issues what were your symptoms?
Mine's been great. I certainly wouldn't discourage anyone from buying.... I'm not discounting the issues people have had (multiple returns is certainly eyebrow-raising), but I'm sure for every problem you hear about on the forums, there are many with no problems that you just don't hear about.
Mine has been great, aside from one dead pixel. Can't even notice it for the most part, especially since adding one of the anti-glare screen covers.
Sent from my LogicPD Zoom2 using XDA App
I just replaced mine today for sound issues!! Every time it would hibernate I would lose all sounds and the only way to get them back was to reboot.
Not an issue in sight. No screen problems. No sound issues. My biggest complaint is no bluetooth.
Sent from my NC 1.0.1 AN2.12.18
Thanks for all replies folks!
I feel better now
It will be interesting to see more votes in couple days.
No problems at all here 3 weeks in. I visit the B&N forums somewhat frequently and never heard of the sound problem before reading this thread.
My biggest problem is reboots after rooting.
First one dust under screen, dead pixel dead center.
Second one dead pixel lower right corner.
If you look at various sites, you will realize that there really is a quality problem that seems to be more centralized to screen issues/plastic noise.
Also realize that most of the issues are not major hardware failures but simple flaws.
Another thing to notice is that people are willing to exchange multiple times in efforts to find a keeper because the unit is just that good.
3rd one is on it's way! 1st & 2nd one had display issues...!!! Stupid me bought it online & as a bonus, it can't be exchanged in local B&N shops...
Yep ... 5 times. 6th (current) one is great, first 5 all had dead pixels.
I suppose it does say something about how awesome I find the device (once rooted), for me to go through that much trouble driving around getting it replaced ...
Got mine on release day and have had -0- problems ... got a second one a week b4 Christmas and it also was 'perfect' .. no performance or plastic problems ... live in a 'low demand' area I think and perhaps B&N is 'reprocessing' some of the returns that then get shipped to high demand area? Or maybe it's just luck of the draw ... anyway am really pleased with the two I have ...
3 weeks of hard use and no problems, but not rooted. yet.....
My front Bezel starting becoming unstuck at day 12 of the 14 day return period. It was showing the stretching glue on the left side that creaked. I noticed it warping and looked at it in landscape mode from the top.. Surprise!
-CC
Ok, I am B&N is sending my 3rd replacement. (Not Rooted!)
1st one would not boot/reset after plugging it in to recharge.
2nd one reboots and reloads on its own. Called tech. support and had me do a factory reset but the next day did the same thing but came up with an install failure.
My cousin bought one on release date and had no problems with her's.
My first one(Tursday) came OOB with a borked USB port on the NC. I managed to get the cable inserted twice on Thursday(almost took it back the first time that I plugged it in but the cable finally went in as I was about to give up). The next morning no amount fiddling would get the connector to insert properly.
Had a horrible time exchanging it. The idiot at the register kept trying to tell me that it was "fine" and that was how it was "supposed to be" until I made him hook up the power adapter, point out no LED, took it over to the demo unit and demonstrated there, got them to get their charger out try it in the obviously defective one and couldn't insert that cable either. Finally they gave in and deigned to exchange it. After all of that I had decided to check the exchanges connector right then and there, and lo and behold it was just like the demo unit and obvious VERY clearly inserting unlike the defective unit.
B&N have crappy QA, cs, and sales. No wonder they're in trouble... I think that if anything crops up w/this one before my 14d are up its going back permanently. I probably should've bought it from the Worst Buy literally across the street or Walmart for better cs alone.
Who is manufacturing the NC for B&N ?
lifeisfun said:
Who is manufacturing the NC for B&N ?
Click to expand...
Click to collapse
IIRC correctly , the hardware is by Inventec (Taiwan). As far as problems, none... nada... zero... zilch with mine, nor have I had problems with either of the "classic" Nook ereaders that we have.
After reading all of the crappy review for the transformer, it looks as if 50% are happy 50% are not.
I am wondering if the problems are occurring in batches because I just ordered mine from American TV and it will probably be here tomorrow or the next day.
A lot of the problems I have found are from the batches that have already been purchased and I don't know what to think.
Two things:
When asus was first bringing these to market, it could the problems are coming from they just naturally skimped on manufacturing quality because they are so damn cheap. Or they had a bad batch to get them to market quickly.
Asus could also just had normal manufacturing quality before and NOW since there is a high demand, newer units may experience worse manufacturing quality. Or they could be better because they knew of the problems.
Hope its not too confusing, what do you guys think? Newer units = worse quality? Older Units = better than newer?
i think logically you could expect the first units to have the most problems, however, we dont know if asus had enough complaints, or realized that there are defects (if there are--aside from software side) to be able to retool and make changes during the assem process to produce better revised hardware.
I actually gave this exact topic a lot of thought a few days ago, i thought about everyones complaints and how it was hit/miss it seemed, and i wondered whether the people that are complaining were truly the "first" adopters and got REV 1 hardware. Obviously, since they are playing with the tab and most of us are anxiously awaiting its arrival i would assume it just may be the case. Heres to hoping that these little glitches were an easy fix at the factory level (but knowing how they operate i doubt its a simple/cheap/quick process, which makes me doubt that the tabs that me and you will receive this week will be any diff from the ones recieved by the people last week and the one prior. the time frame is just too small, but then again, anythings possible).
slowhatch said:
i think logically you could expect the first units to have the most problems, however, we dont know if asus had enough complaints, or realized that there are defects (if there are--aside from software side) to be able to retool and make changes during the assem process to produce better revised hardware.
I actually gave this exact topic a lot of thought a few days ago, i thought about everyones complaints and how it was hit/miss it seemed, and i wondered whether the people that are complaining were truly the "first" adopters and got REV 1 hardware. Obviously, since they are playing with the tab and most of us are anxiously awaiting its arrival i would assume it just may be the case. Heres to hoping that these little glitches were an easy fix at the factory level (but knowing how they operate i doubt its a simple/cheap/quick process, which makes me doubt that the tabs that me and you will receive this week will be any diff from the ones recieved by the people last week and the one prior. the time frame is just too small, but then again, anythings possible).
Click to expand...
Click to collapse
Definitely have to agree. My guess they are the same and it is so difficult for Asus to actually respond to problems and transfer a fix to the manufacturing of the units. The only real thing I am worried about is the light bleed/dead pixels.
Moreover, the problem seems to be 50-50 and my estimate came from the assumption that there is manufacturing quality loss through increase production speed to meet the high demand. I tend to believe this because of the poor quality control. I am assuming (after reading the post about the guy receiving a 2.2 model) is that they do perform screen quality checks, to a certain extent. Some may have just slipped out.
Lets just hope we get a solid model.
I tend to side with the second poster...it's all about quality control....how many get out the door without their defects being noticed OR....being flagged as a defect.
I've worked around assembly lines all of my life...25+ years and I can understand some defects got through unnoticed....but the question is: when were they noticed and what steps were taken to prevent the same issue from occurring again?
And the second point is valid also....speed equals a mindset of "this one little corner-cutting decision won't make that big a deal in the long run...."
Unfortunately, rushing things to market to fill orders at a breakneck pace means that issues are more likely to get by...that's a fact of life.
When cash is on the line...decisions get made that might not otherwise gotten made.
I hope mine comes today without the glaring errors that I've seen here...crossing my fingers...
My only real complaint is the light bleed. I know it isn't the only device that's had this problem. I remember when I was reading the Evo 4G forums it had a similar problem when it first came out and recently the iPad2 had light bleed issues too.
The light bleed isn't a huge deal, but it is distracting while watching certain tv shows and movies imo.
I've had 3, first one was the very first batch in the UK, arrived mid April or thereabouts. The next one was around the end of April and the the latest one I received around the 6th of May.
1) Mid April
Some lightbleed on 3 of 4 edges. Perfect screen in terms of pixels. Imbalanced speakers. No sleep of death in 2 weeks or so. No gap in glass.
2) End April
Terrible lightbleed. 14+ stuck pixels (I gave up counting). I think the speakers were imbalanced too. No sleep of death, but only used it for a few minutes. No gap in glass was noticed.
3) Start of May
Some lightbleed, probably akin to 1. Around 8 or so stuck pixels, seen on black screen. Perfectly balanced speakers. Had 1 incident of the sleep of death within 5 days. Glass does not fit perfectly on left hand side (gap of 1-2mm allowing dust inside and glass to be lifted by nail)
Had I known what would happen I would now gladly stick with the first! So, from this small sample it seems that in my case the earlier devices were better in some ways but not in others. We'd have to have a huge sample to be able to answer definitively. I still love the tablet though.
I have a first US batch version and it's fine.
This is why I just ordered the Acer. I got mine and had some light bleed. It got worse. The creaking got worse. Now there is a small piece of dust under the screen. It is not very noticeable except on white background but it worries me that in 6 days of ownership it is getting worse. I now see a dust spec under the camera glass.
The edges of all the ports are razor sharp and can take off skin.
I love the weight the price and the ups screen but the build quality is very disappointing. If it was only the light bleed from day one I would keep but I can't handle how much more has happened in 1 week of ownership.
I got a 32 DB Livonia using coupons from staples for only 40 dollars more than a 16gb Asus cost me. The screen in store was quite good. The build quality seemed much better and despite the added weight it seemed more comfortable. To hold given the curved shape. If availability were better maybe I would exchange my Asus but no stock around.
in the end I might just opt for the new galaxy tab as it seems to be most like the load in size and weight.
Sent from my Transformer TF101 using Tapatalk
Just received
I just got the TF in the mail today. It is nice.. but there are some drawbacks from the xoom that I miss.
Xoom felt nicer in my hand and had that led notification. But the screen on the TF is WAAY better.
I do have light bleed in small sections, not terribly noticeable. Speakers are fine. no dead pixels, yet. not really a creaky sound, just when I press harder than normal on the screen. No glass misaligned. I will seal up the beast with a vinyl cover. Screen is responsive, no probs yet.
A bit disappointed
I received my TF this Thursday and was so very happy. After unwrapping it I pressed the power button and I got nothing. I thought OMG it's not working. Then I thought, maybe they didn't have time to charge the battery. So I charged it. I checked on in within a hour and pressed the button and it came on. I began to play with it and realized that after the TF wasn't in use for more than 5 mins the power button whenever pressed didn't wake the TF up... SO i pressed and pressed.. nothing.. so I waited about 30 sec after a press of the button and it came on.. After going thur this over and over I figured it was a defect and I RMA'ed it. I'm hoping that they didn't just push out a product that will have a lot of issues...
Here's my two cents:
Got my TF from Fry's in LA on May 5th. 32GB don't know manf date.
For light bleed - minimal sround the left lower edge and upper right edge. Dark room, bright up full, about a 1mm bleed - very slight and almost unnoticible.
Running latest update with no issues, just updated again today with no issues.
Sometimes after a long sleep it won't power back up with the power button, so I press the vol down and pwr at the same time (shut down) and it shuts down and restarts fine...Seems a sw glitch.
Other than that it's an awesome machine!
Dock - arrived on the 12th. charged up fine, docked fine, no mouse, brick or other issues other than the backspace key is touchy (actually not touchy -takes some effort), but all other keys work well. I think I'll RMA it later depending on how many show in production (I can live with this for now).
Case - had to cut a small hole in bottom to allow charging while case is closed. Otherwise great.
I hope this helps.
BTW, I don't follow these threads too much, so if you need something please PM me.
I feel like I've said this before, but I'm honestly surprised to hear of all of these issues. Mine doesn't seem to have any of them. No gaps around the screen, the glass fits perfectly, the casing for the tablet seems sturdy and doesn't budge at all. There's very little noticeable light bleed, if any. I've never had anything like a "Sleep of Death". I couldn't be happier with the quality of this beast.
EDIT: I should mention I have a 32GB version that I purchased from TigerDirect on Wednesday, got it this past Thursday.
My tablet and dock were among the older units. I had only one instance of SOD and the green screen with the camera issue which has been fixed via firmware update.
The tablet itself appears to be of high build quality,the bezel is secure, no gaps around the screen seal, no dust,no dead pixels,very minimal light bleed that I had to actively look for.
no problems to speak of
eGoing on 2 weeks ownership using various each day.
The only thing a few times I've come back to an unresponsive unit. Then I just held power button down 10 seconds and then rebooted. I take that with a grain of salt.
But. I am not going to update software for another week or so. Until I read more positive reviews
Many problems with mine
I ordered mine from The Best Buy batch on May 22nd, and it came with a not-smooth not-particularly-responsive screen; it then got two light leak spots, the clock disappeared from the menu bar once, and it bricked when I ran the 3.1 update. I sent it back, but I wonder, are the screens really not as smooth or responsive as the Xoom or Acer A500?
So what's the consensus? I was really considering picking up a Nexus 7 until I read about the screen separation issues. I used to have an ASUS Transformer and really liked ASUS's build quality. Is the Nexus 7 really that bad? I don't like the idea of buying a $250 tablet and then having to open it up and modify it just to make it work properly. (Especially since the iPad Mini is rumored to be released next month.)
primalmu said:
So what's the consensus? I was really considering picking up a Nexus 7 until I read about the screen separation issues. I used to have an ASUS Transformer and really liked ASUS's build quality. Is the Nexus 7 really that bad? I don't like the idea of buying a $250 tablet and then having to open it up and modify it just to make it work properly. (Especially since the iPad Mini is rumored to be released next month.)
Click to expand...
Click to collapse
I personally loved my Nexus 7, and I'm one of the lucky ones who had their screen crack. I should be getting it back today, as it was supposedly fixed under warranty without a charge (guess I plead a good case when I called 4x reminding them I won't be paying for it). Keep in mind just how many of these units were sold. There's a handful of people here on the forums and AndroidCentral, etc., posting about this issue, yes... but go onto an Apple forum and you'll see the same thing.
Has the iPad mini even been announced yet? I keep hearing rumors but nothing solid. If you're somebody who doesn't mind iOS, it's not a bad option to wait, but you'll almost undoubtedly pay more for a similarly spec'd tablet. I personally wouldn't consider it, but that's just my 2c. If you're somebody who is pretty agnostic about it, waiting to see what more options come about is never a bad thing. Just don't catch the waiting disease... if you wait too long, you'll find yourself in a constant waiting hole with no devices you could otherwise be enjoying. :good:
I will say this, though. If you buy a Nexus 7, buy it from a local retailer. It's the same price as the N7 from Google Play, and plus you cut out the shipping time. Sorry Google, but being able to return a faulty N7 (in the event you get one) at a B&M store two miles away is still quicker than your (albeit, still fast) shipping turn around time.
The issue is not as great as the forums would make you believe. After all every single product ever made has a small number of defects.
Don't worry about it would be my suggestion.
Thanks for the suggestions. I guess my main concern is the reports of people going through 3 or 4 Nexus 7's, even at a retail store, before they find one that is acceptable.
I've had my Nexus 7 since it came out. Not a single defect or issue, its been great so far and I love it.
primalmu said:
Thanks for the suggestions. I guess my main concern is the reports of people going through 3 or 4 Nexus 7's, even at a retail store, before they find one that is acceptable.
Click to expand...
Click to collapse
As with pretty much any product out there, I always take the online reviews with a grain of salt. A larger percentage of the people who had problems are likely to post compared to those that didn't have problems. Any time I buy something that causes me grief, I am generally ticked enough to want to post about it somewhere, but it rarely occurs to me to post something about products that work as promised and don't have issues.
This does not apply to my N7 because I love it so much I can not stop telling people. Mine has a tiny bit of screen lift that I would not have noticed if I had not read about it. Certainly not enough to want to try to return it. I may try one of the posted fixes but even that seems unlikely. Can't find the downtime...
The issues are there and they are real!
First Nexus = Creaking and Screen separation
Second Nexus = Screen separation
Third Nexus = Screen separation
Fourth Nexus = Severe creaking
Its sooooo sad as I love everything else about this freaking tablet! But the quality issues are out there just so you know it.
Huge issues
I think the screen lift screen crack and screen becoming un responsive is a HUGE Issue.. Its not just this forum where you see compalints.. You see it from tech reviews and so on.. I know that this is Hyped up causing to to be a bigger issue then it is . But the issue is not just the defects . Its how google and Asus has chosen to deal with this.. They have had my money cost of 3 tablets locked away due to exchange waiting . I Call and email with no response other then we will foreword it to a specialist .
I say get One From a Bick and Mortar store with a good reputation for taking care of there customers .. Buy a Extended warranty to where the STORE Has to deal with your device If and when it breaks.. I have never in my life seen such a Lack of Customer Service or Lack of Response for such issues .. Im left to where if i do not get a shipping confirmation and PAYMENT BACK TO MY BANK i will Have to file a complaint because im near the required time to do so with my card ... This is Pathetic..
so to everyone who says THERE IS NO ISSUE. READ THE INTERNET... im happy you have a perfect device it does happen But im getting the feeling there are as many defective ones as good ones...
OP if it seems like im trolling your Thread i am very sorry .. Just want to clear up some of the above GET IT GET IT COMMENTS. There are issues with this device . yes you can get lucky and get a good one.. JUST BE AWARE TO NOT GET IT FROM GOOGLE PLAY
"so to everyone who says THERE IS NO ISSUE. READ THE INTERNET... im happy you have a perfect device it does happen But im getting the feeling there are as many defective ones as good ones... "
Good advice, because everyone knows that everything you read on the internet is 100% true!!!!
I have one that has slight screen lift and creaking, but It's honestly not bad enough for me to worry about. I can't detect it unless I carefully look at it from the side, or press on the screen hard enough to make it flex. The case I have it in completely hides the problem.
Now, should it happen? No. But I bought a Nexus 7 because it was a fairly high-spec tablet that I didn't have to pay $500 for. I'm willing to accept a few compromises, especially when the cure (on-phone time, a bad refurb replacement) could be worse than the disease.
To minimize hassle, do what others have suggested and buy locally from a retailer with a good return policy.
dparrothead1 said:
"so to everyone who says THERE IS NO ISSUE. READ THE INTERNET... im happy you have a perfect device it does happen But im getting the feeling there are as many defective ones as good ones... "
Good advice, because everyone knows that everything you read on the internet is 100% true!!!!
Click to expand...
Click to collapse
bonjour!!! - state farm commerical. lol
primalmu said:
Thanks for the suggestions. I guess my main concern is the reports of people going through 3 or 4 Nexus 7's, even at a retail store, before they find one that is acceptable.
Click to expand...
Click to collapse
The prevalence of screen lift is not being exaggerated. It's a widespread flaw, the cause of which is present in every unit. That's not to say that every display is separated, but the way the devices have been assembled through August (C8O serials) has left every Nexus 7 with an inadequate bond under the left side of the display.
http://forum.xda-developers.com/showpost.php?p=29194958&postcount=372
http://forum.xda-developers.com/showpost.php?p=30703449&postcount=1
Although the adhesive is weak in that area, some other stress should be required to actually force the underside of the display away from the frame. That force is either frame warp or pressure from internal components. ASUS has begun omitting screws from the left side of the device in an attempt to remove some of the stress behind the separation. This points to frame warp as the primary contributor, but it's a partial fix at best.
http://forum.xda-developers.com/showthread.php?t=1870556
The fact that ASUS is now implementing reductive measures against screen lift as part of its assembly process should lay to rest any doubts about the scope of this flaw.
Having said that, I would not advise against buying a Nexus 7. It's still the best 7" tablet available, not to mention the best value for a tablet of any kind.
I went through three units with lift before deciding to wait it out, but this was not necessarily the correct decision. My second unit had merely the slightest lift and was well worth keeping, but users on this forum misled me to believe that screen lift was a rare thing so I exchanged it. My third one had more lift and exhibited distortion when pressed along the left side. That one was not worth keeping, so I decided to return it and wait for this issue to be fixed. Not sure if that's going to happen.
Like JaSauders said, the probability of lifted glass cracking during normal use seems very low, and if flexing the display caused a row of dead pixels, or any other sort of display failure, that would be covered under warranty.
I will say this, i never noticed the screen separation until I came to these forums and read about it, HOWEVER, now that I know about it, it drives me crazy.
On the flip side, if you plan to use a case that covers the bezel, you experience or see it anyway, so its not a big deal.
I haven't experienced any other issues aside from the screen seperation, and even then its not noticeable until you start messing with it.
I don't believe the problem is that uncommon.
Both units I've received so far have had the problem to some extent. The first one had it really bad and I exchanged it when I heard that it may be causing screens to crack. The 2nd one also had the problem, but the screen lift was so small that I wasn't worried about it. I still ended up exchanging the 2nd unit because of other issues (mostly the oleophobic coating was rubbing off) and should be receiving my 3rd one today.
If it means anything though, even with the screen lift problem, I still consider this the best tablet for the price and I have no interest in the new Kindle Fire or iPad Mini.
myke66 said:
I will say this, i never noticed the screen separation until I came to these forums and read about it, HOWEVER, now that I know about it, it drives me crazy.
On the flip side, if you plan to use a case that covers the bezel, you experience or see it anyway, so its not a big deal.
I haven't experienced any other issues aside from the screen seperation, and even then its not noticeable until you start messing with it.
Click to expand...
Click to collapse
Putting case over the edge of the tablet is NOT a fix for the screen separation issues . Eventually the glass will move enough from this causing it to become weak. or a piece of dirt will get under the screen and it WILL CRACK Or crumble. Anytime hard glass is put in a situation where it can move independently being twist or bent It will weaken and crack .
I know this from Structural Engineering classes.. I have been a project manager for high rise construction for much longer then some of those on here are old. . Glass that is scratch / impact resistant MUST BE SECURED PERFECTLY . Must be allowed to expand and contract from edge to edge .. But must be fixed firmly and equally on all sides with no extra pressure or lack of in any area.. THE LAST Sentence here is the ISSUE WITH THE NEXUS TABLET
Now with the above said i to agree its the best Device right now with its size and cpu.. If there were a worthy 7 inch Device i would NOT OWN A NEXUS 7 .. check out the specs on the new corning-FIT Glass... There should be a metal frame for this glass to sit in..and it should over lap the edge of the screen NO GLASS From edge to edge ..
Of course this is all my opinion. Make your own judgement.. But do not Pretend there is not a issue just because you Love your device and you accept less then Perfect...
erica_renee said:
Putting case over the edge of the tablet is NOT a fix for the screen separation issues . Eventually the glass will move enough from this causing it to become weak. or a piece of dirt will get under the screen and it WILL CRACK Or crumble. Anytime hard glass is put in a situation where it can move independently being twist or bent It will weaken and crack .
I know this from Structural Engineering classes.. I have been a project manager for high rise construction for much longer then some of those on here are old. . Glass that is scratch / impact resistant MUST BE SECURED PERFECTLY . Must be allowed to expand and contract from edge to edge .. But must be fixed firmly and equally on all sides with no extra pressure or lack of in any area.. THE LAST Sentence here is the ISSUE WITH THE NEXUS TABLET
Now with the above said i to agree its the best Device right now with its size and cpu.. If there were a worthy 7 inch Device i would NOT OWN A NEXUS 7 .. check out the specs on the new corning-FIT Glass... There should be a metal frame for this glass to sit in..and it should over lap the edge of the screen NO GLASS From edge to edge ..
Of course this is all my opinion. Make your own judgement.. But do not Pretend there is not a issue just because you Love your device and you accept less then Perfect...
Click to expand...
Click to collapse
My screen never separates to the point where anything could get under it... it just lifts up enough where I can press it back down..I'm not sure that would ever be bad enough to crack the screen. I'm have a C8O build so it may not be as bad as previous models? Im not sure.
steevp said:
I don't believe the problem is that uncommon.
Both units I've received so far have had the problem to some extent. The first one had it really bad and I exchanged it when I heard that it may be causing screens to crack. The 2nd one also had the problem, but the screen lift was so small that I wasn't worried about it. I still ended up exchanging the 2nd unit because of other issues (mostly the oleophobic coating was rubbing off) and should be receiving my 3rd one today.
If it means anything though, even with the screen lift problem, I still consider this the best tablet for the price and I have no interest in the new Kindle Fire or iPad Mini.
Click to expand...
Click to collapse
Update: Got the 3rd unit
It's one of the new C8O models and it's the best one I've gotten so far.
No screen lift, no flickering, none of the issues I had with the previous ones.
It's pretty much flawless as far as my eyes can tell.
steevp said:
Update: Got the 3rd unit
It's one of the new C8O models and it's the best one I've gotten so far.
No screen lift, no flickering, none of the issues I had with the previous ones.
It's pretty much flawless as far as my eyes can tell.
Click to expand...
Click to collapse
Congrats My C8O had minor lift, but last night I decided to glue it down and now its fine. Two drops of super glue and 5min later I havent had a problem all night/this morning. Played a bunch of 3D games to really heat it up and its golden.
I have the screen lift issue, but I have decided not to replace it. I would recommend that customers purchase the extended warranty at the store if in fact covers broken displays.
That said, I just rub down the face with a microfiber cloth before use and the lift is eliminated for a duration. Helps with the finger prints too.
That said, once a competing tab is released with the same specs I'd recommend that one instead. This QA issue will make me avoid Asus in the future. Google needs to vet OEMs better next time.
I've had four Nexus 7 tablets that have all had screen lift on the left side. Just got my latest one yesterday and it still has the issue. I've purchased lots of tablets and gadgets and this having to exchange something this many times and still getting a defects two months later is hardly normal or expected.
Fortunately the raised glass doesn't impair the functionality of the table (normally) and the tablet is pretty nice with stock Android Jelly Bean, Tegra 3, high DPI screen, and only $200/250. So all it's good points do outweigh ASUS incompetence to manufacture the tablet properly.
I bought an N4 last year when they first came out. I had to send it back because of a number of issues with it, and I'd just like to know if they were ever solved? I'm very interested in the N5 when it comes out, but to say I'm apprehensive of buying another LG device would be a bit of an understatement.
1. My device had a constant squealing/buzzing noise coming from the speaker at all times. It was a known fault on these forums at the time. Did LG ever solve this in later batches of phones? Did anyone have a phone with this issue and just keep it, if so how is it now?
2. Awful washed out screen - my device just looked like cr*p. I guess this is something that could maybe have been solved with software? Was it ever?
3. Poor touch response - my N4 wouldn't register swipes properly, in fact it was almost unusable. Was this resolved?
I have to say that I'm not knocking the phone - aside from these issues it was a great phone (well, apart from the glass back and meagre 16GB storage, but those things were intentional, as opposed to poor components/manufacturing/software).
setspeed said:
I bought an N4 last year when they first came out. I had to send it back because of a number of issues with it, and I'd just like to know if they were ever solved? I'm very interested in the N5 when it comes out, but to say I'm apprehensive of buying another LG device would be a bit of an understatement.
1. My device had a constant squealing/buzzing noise coming from the speaker at all times. It was a known fault on these forums at the time. Did LG ever solve this in later batches of phones? Did anyone have a phone with this issue and just keep it, if so how is it now?
2. Awful washed out screen - my device just looked like cr*p. I guess this is something that could maybe have been solved with software? Was it ever?
3. Poor touch response - my N4 wouldn't register swipes properly, in fact it was almost unusable. Was this resolved?
I have to say that I'm not knocking the phone - aside from these issues it was a great phone (well, apart from the glass back and meagre 16GB storage, but those things were intentional, as opposed to poor components/manufacturing/software).
Click to expand...
Click to collapse
1. You speaker must have been defective.
2. This is Google's colorimetry for the Nexus 4, it can be fixed by flashing a tweaked kernel.
No idea about 3. I usually don't have a problem with swipes, but some apps such as Shuttle Music Player may be less sensitive than others.
setspeed said:
I bought an N4 last year when they first came out. I had to send it back because of a number of issues with it, and I'd just like to know if they were ever solved? I'm very interested in the N5 when it comes out, but to say I'm apprehensive of buying another LG device would be a bit of an understatement.
1. My device had a constant squealing/buzzing noise coming from the speaker at all times. It was a known fault on these forums at the time. Did LG ever solve this in later batches of phones? Did anyone have a phone with this issue and just keep it, if so how is it now?
2. Awful washed out screen - my device just looked like cr*p. I guess this is something that could maybe have been solved with software? Was it ever?
3. Poor touch response - my N4 wouldn't register swipes properly, in fact it was almost unusable. Was this resolved?
I have to say that I'm not knocking the phone - aside from these issues it was a great phone (well, apart from the glass back and meagre 16GB storage, but those things were intentional, as opposed to poor components/manufacturing/software).
Click to expand...
Click to collapse
It sound like you are knocking the phone. It very well may be the best value on the market today. I never experienced any of those issues and neither have the friends of mine who happen to have the same model.
Sent from my GT-P7510 using xda app-developers app
Personally I'm on my 7th device and finally have one that I'm accepting. The local ATT warranty store manager himself went through 5 phones before he found one he kept. The phone itself is great on paper and performance is top notch. I just wish Samsung paid a little more attention to QA standards and tested the phone more thoroughly before releasing it. At this point if you have a phone that is hardware defect free, one can only hope software issues will be resolved in future OTA's. I have contacted my carrier and Samsung and they are now aware of the issues. However I urge you all to call and let your carrier know of any problems b/c the only way Samsung will resolve these is if the carriers get enough feedback to contact Samsung direct.
This is the list I have experienced and some I'm aware off. Feel free to add to the list.
::::::::Hardware:::::::
Screen- bubble under lens
- dimples and ripples under lens
- scratches on lens surface
- scratch under lens
- hue tone near bottom is more pink
Home Button- recessed on one side (2 of them were almost flat on right side and raised on left)
Back button - stops working
Heat - I would not consider this a problem, I only charge at 1/2xC or less, in my experience heat is perfectly normal on Li batteries during discharge and charge.
::::::::Software::::::::
Email Notification - Audible push email notifications don't come through after phone has been unused for 10 mins or longer on mobile network (lots of threads created on this)
Exchange emails - EAS emails get deleted as soon as it shows up in the client
OTA Update - Phone would not OTA update OE2 - soft, hard resets, clear cache made no difference
Memory management issues - Tmobile/Sprint phones
Screen rotation - out the box screen rotation did not work, *#0*# gyro test indicates fault
Reboot Cycle - out the box phone would just continuously to reboot
Carrier Options - Some carriers like ATT have removed some basic options and features other carriers allow: Calendar option to lock screen with power button on att phones is inclusive with immediate lock. Smart Manager, Download booster.
i feell bad for you
mine is fine .. at least for me.
auto brightness issue..
Krestic said:
auto brightness issue..
Click to expand...
Click to collapse
Thanks i forgot to add that, very odd how some of these phones have issues and some don't, I can understand HW QA issues but software when they all get the same FW is byond me
On a G925I device running firmware AOD3, I experienced a much worse issue with brightness whereby when auto-brightness is off, the screen wouldn't dim before timing out (actually it would dim, but maybe only like 1%). Very annoying when you're reading some text and the screen just turns off without warning! I've upgraded to AOE3, and now I only have the auto-brightness issue mentioned above.
My first Edge functioned flawlessly, but had a spec of dust under the screen. No other problems whatsoever. My second Edge seems to be great so far.
Synyster06Gates said:
My first Edge functioned flawlessly, but had a spec of dust under the screen. No other problems whatsoever. My second Edge seems to be great so far.
Click to expand...
Click to collapse
It is a hit or miss, that is bad QA and Samsung needs to tighten up their standards if they want to keep up with the big boys.
arf8 said:
It is a hit or miss, that is bad QA and Samsung needs to tighten up their standards if they want to keep up with the big boys.
Click to expand...
Click to collapse
Sad thing is... they ARE the big boys. I had two OnePlus Ones that were fantastic out of the box. My first S6 (regular) had defective hardware/software that I couldn't fix, second S6 (edge) had dust under the screen. On my third device I think I've finally got a good one. If a small company like OnePlus can get a phone with amazing specs (at its time) for under half the cost of Samsung AND still have decent QC, Samsung can too. They just aren't doing their job.
I agree their quality control is horribly lacking with the S6. This is my first android phone, I'm a long time blackberry user, never been a fan of apple for various reasons i won't get into but everyone is going to compare their quality to iOverpaid phones which sadly is a benchmark in the industry these days. The lack of QC/QA is pathetic at best. Even worse is their customer service when a member here sent in his phone for repair he got the phone back with dust under the screen. I realize mfg of this phone is very difficult and it is probably easier to replace than repair but there is no excuse when you pay for a flagship one that is about $1k to have these many hardware issues, software is a different story and more acceptable but hardware is inexcusable. I spent too many weeks and days of my life dealing with this issue, I was at the point on this 7th phone if it did not work I was going back to blackberry and staying forever.
3th S6 edge for me.
1st: after one hard drop, I've pretend to try returning it by pretending a problem with dead pixel... And got a fresh one
2nd: strange home button: raised on the left, bubble under the screen ( barely unnoticeable ) plus, it's no big deal, but this one was unable to reach 66k on antutu.
3nd: perfect! Easily reach 72k on antutu
you got a dead pixel after you dropped it? and the phone showed no sign of visible damage outside?
I don't run benchmarks on phones, and even the ones on PC you have to take with a grain of salt. But it is odd the performance was so far off assuming all is equal?
Some times rotation dosn't work in gallery...but i think cause is rom modded...
You can't fault the mfg for non oem ROM issues but there have been phones out the box with rotation issues for sure
Noticed this last night : light bleed at the edge when the capacitve keys are on.
I think it's a defect. Anyone else have this ?
I had that on one unit but it was very minor and again it is a mfg and quality issue.