Hi, I need a new battery as mine is worn, I need to know if I buy a higher capacity battery (ie mugen or defy + battery, not fakes) on my green lense defy will it cause me issues? If I flash a defy + rom I lose camera as I am green, so can I safely use a higher capacity battery and still get a full charge out of it?
Sent from the real world by hacking into the matrix
It should work if you flash battery fix in froyo kernel ROMs
hsrars-d said:
It should work if you flash battery fix in froyo kernel ROMs
Click to expand...
Click to collapse
Which battery fix? Is there one for the mugen battery? I think its 1800mah
Sent from the real world by hacking into the matrix
@non4 said:
Which battery fix? Is there one for the mugen battery? I think its 1800mah
Sent from the real world by hacking into the matrix
Click to expand...
Click to collapse
If the mugen is for MB525 then you need no fix.
For the Defy+ battery, I think you need to flash the battery fix that was going around in the Epsy CM threat (as he has no Defy+, he used the Defy batt and the Defy+ users had to flash a fix.)
labsin said:
If the mugen is for MB525 then you need no fix.
For the Defy+ battery, I think you need to flash the battery fix that was going around in the Epsy CM threat (as he has no Defy+, he used the Defy batt and the Defy+ users had to flash a fix.)
Click to expand...
Click to collapse
Yes, so even though its a bigger capacity it will read right?
Sent from the real world by hacking into the matrix
I won't vow but I thought the Defy+ battery works with the battery fix from here:
http://forum.xda-developers.com/showthread.php?t=1795647
There were some that tried. It somewhere in the Q&A
The mugen 1700mah will work. It is a 3.7 lithium ion battery. Same as the MB525 (BF5X) one.
The one from the MB526 (HF5X) is a 3.8 lithium ion polymer battery.
The 'replacement' battery's from ebay with stated to work with Defy+ are all for Defy so a nogo for the Defy+ users.
I have just bought a Defy+ battery for my Defy (green lens). The problem is that you never know how much battery is left. It goes from 100% to 1% in a few hours and stays in that 1% until it is fully drained (10 hours or more).
For what I have read it is impossible to have green lens camera and the Defy+ battery working at the same time:
- If you use froyo kernel camera will work but the battery won't.
- If you use gingerbread kernel it will be the other way round.
So for now I prefer a working camera without knowing how much battery is left.
The only silver lining I have found is in this thread (http://forum.xda-developers.com/showthread.php?t=1627631). It is for the photon 4g but it might be possible to make it work in our Defy.
Weren't there defy+ users on froyo kernel? (By flashing the bl5 eclair or BL6 froyo)
Are you sure you have the right battd and lib?
But I don't know for sure of course because I don't own a defy+ nor battery.
Verstuurd van mijn MB525 met Tapatalk
alturigo said:
I have just bought a Defy+ battery for my Defy (green lens). The problem is that you never know how much battery is left. It goes from 100% to 1% in a few hours and stays in that 1% until it is fully drained (10 hours or more).
For what I have read it is impossible to have green lens camera and the Defy+ battery working at the same time:
- If you use froyo kernel camera will work but the battery won't.
- If you use gingerbread kernel it will be the other way round.
So for now I prefer a working camera without knowing how much battery is left.
The only silver lining I have found is in this thread (http://forum.xda-developers.com/showthread.php?t=1627631). It is for the photon 4g but it might be possible to make it work in our Defy.
Click to expand...
Click to collapse
So I'll use the mugen battery for mb525
Sent from the real world by hacking into the matrix
labsin said:
Weren't there defy+ users on froyo kernel? (By flashing the bl5 eclair or BL6 froyo)
Are you sure you have the right battd and lib?
Click to expand...
Click to collapse
I don't see why a Defy+ user would have a Froyo kernel, neither the camera nor the battery will work.
I have tried another battd/libbattd but it gives a question mark inside the battery meter.
alturigo said:
I don't see why a Defy+ user would have a Froyo kernel, neither the camera nor the battery will work.
I have tried another battd/libbattd but it gives a question mark inside the battery meter.
Click to expand...
Click to collapse
Sucks.
Camera does work AFAIK.
They did it when CM9 began and epsy did a couple of defy only roms and some defy+ users couldn't wait.
And they can return to GB kernel just by flashing it in recovery.
Could be the battery doesn't work on froyo kernel. Sucks a bit for Green lens defy users.
Verstuurd van mijn MB525 met Tapatalk
There is no real fix for battery on red lens defy+. It might show you full charge but it will never go more than 4.15V and it used to be 4.35V in stock rom.
Related
When I tried charging the phone I see the led turns it to red and displaying a questing mark. I am on stock firmware DFP-231 (not rootable)
No problem with 1700 mAh battery
Can any one help ?
anavas said:
When I tried charging the phone I see the led turns it to red and displaying a questing mark. I am on stock firmware DFP-231 (not rootable)
No problem with 1700 mAh battery
Can any one help ?
Click to expand...
Click to collapse
mine happened when i tried an ICS nightly ... restored to my old MIUI PIKACHU EDITION and all was well .....
try changing the sbf or fresh flashing it ?
Does it show correct battery status on MIUI??
tnx
cickvoa said:
Does it show correct battery status on MIUI??
tnx
Click to expand...
Click to collapse
Extended batteries will never show their true % .... first 100 % of original battery then from 0 their work starts , so no miui or cm7 here
anavas said:
When I tried charging the phone I see the led turns it to red and displaying a questing mark. I am on stock firmware DFP-231 (not rootable)
No problem with 1700 mAh battery
Can any one help ?
Click to expand...
Click to collapse
The extended battery uses different tech to your 1700 so any reg defy build will work with it tho may display wrong stats, then when you use the original defy plus battery you will need to flash battery fix on the reg defy roms
Unfortunately you'll have to pick one of your two battery's and enjoy or keep flashing fixes when you swap the battery
teamwork makes the dream work
Defy Plus & 3500mAh battery
Where did you buy that battery? I have only found batteries with that capacity for normal defy but not for defy+.
Is there any new fixes for it on CM10?
my battery drains from 55% to 50% in a sec.. any idea why is that problem?
i've already done the battery calibration and the problem is still here..
defy+ MB526 with quarx cm7.2 20120329 nightly
Did you apply the battery fix?!
as far as i know i dont need the fix coz ist a defy+ nightly and quarx has already implanted into. my battery go to 100 on every charging
lordyka said:
as far as i know i dont need the fix coz ist a defy+ nightly and quarx has already implanted into. my battery go to 100 on every charging
Click to expand...
Click to collapse
During call this fix may not work properly....
but it was in a rasting state.. none of the apps have ran...
I have the same problem, mine is 30% to 19% it happens to me twice within a minute
sorry for my english
Did you try calibrate the battery once??
yes..
Battery drop/ not chargeable to 100% seems to be the only problem to Defy plus
I'm wondering if I should just buy a normal defy battery for my Defy+. No more need for battery fix
Sent from my MB526 using Tapatalk 2 Beta-5
Download Battery calibration from the play store, charge your phone till 100% and then calibrate the batterty. The app erases the battery history (which is false and is the reason for such drops). And from there the history file is brand new and the drops will be over
Motorola Defy, CM7 @ 1Ghz + CM9 multiboot
[Guide] Install double boot CM7 + CM9
[Guide][Root needed] Unsimlock your Defy
crakeron said:
Download Battery calibration from the play store, charge your phone till 100% and then calibrate the batterty. The app erases the battery history (which is false and is the reason for such drops). And from there the history file is brand new and the drops will be over
Motorola Defy, CM7 @ 1Ghz + CM9 multiboot
[Guide] Install double boot CM7 + CM9
[Guide][Root needed] Unsimlock your Defy
Click to expand...
Click to collapse
as i wrote in the first post, i've done the calibration already...
lordyka said:
my battery drains from 55% to 50% in a sec.. any idea why is that problem?
i've already done the battery calibration and the problem is still here..
defy+ MB526 with quarx cm7.2 20120329 nightly
Click to expand...
Click to collapse
please tell me where i can download the quarx cm7.2 20120329 nightly for defy+, thanks !!
Just calibrate your battery... problems solved
Sent from my MB526 using XDA
Evillest said:
please tell me where i can download the quarx cm7.2 20120329 nightly for defy+, thanks !!
Click to expand...
Click to collapse
http://quarx2k.ru/
BreakShadow said:
Just calibrate your battery... problems solved
Sent from my MB526 using XDA
Click to expand...
Click to collapse
unbelievable.. i've already DONE that...
lordyka said:
unbelievable.. i've already DONE that...
Click to expand...
Click to collapse
me too
This is an old problem with Defy battery and I was experiencing it some 10 months ago..
I tried all the tricks in the book and nothing solves it; I always (90% of the time) see a drop from 56% yo 49% (and sometimes another one around 25% to 21%).
At least three people (one being Walter79) said that it is a hardware issue and that they've fixed that with a new battery.
SOLVED by somehow managing to get into recovery with 1% battery and flashing Red Lens Battery Fix
found under "Flashing Instructions" here (Like an idiot I didn't check.
------------------------
OP:
I recently changed from Epsylon3's 14 July build to Quarx's latest and my battery is showing 100% constantly.
When on charge it still shows 100%, and last night it showed 40 then dropped to 10 and wouldn't charge.
Overnight it charged to 100% though and hasn't changed.
I've tried wiping battery stats and cache/dalvik but no change.
Sent from my Motorola Defy (MB525) Red Lens running Quarx's CM9 through XDA Premium.
You must consider your self lucky! People make threads complaining that they don't get 100% battery stat ever. Your case is reverse.
Jokes apart, try caliberating and see.
S3nt fr0m my D3fy/w1u1 GB st4BL3
may be a victim of battery problem, may be battery has gone old and cannot hold charge
My battery has been completely fine until I flashed. Battery calibration doesn't do anything. There was a news post about it. All the battery stats hold is how much battery is use by apps (shown above).
I'm more concerned that I could have 20% and it shows 100 and my phone dies when I need it!
Sent from my Motorola Defy (MB525) Red Lens running Quarx's CM9 through XDA Premium.
Seems to have resolved itself. I tested App2Zip from play market and now my phone is showing 50%. Disregard this topic now. Thanks
Edit: doesn't seem to be going below 50. Seems frozen unless I reboot?
Sent from my Motorola Defy (MB525) Red Lens running Quarx's CM9 through XDA Premium.
i have the same problem on latest quarx defy+..
daede86 said:
i have the same problem on latest quarx defy+..
Click to expand...
Click to collapse
Perhaps it's Quarx's build? I wonder if anyone else has this problem.
Don't let your phone die. Mine just did and now won't boot :|
You guys might have to try Auris battery fix for red lens defy only
Sent from my MB525 using xda premium
Same problem here,
gonna try to see if it works,
thanks a lot!
Hi Everyone,
I actually live in China and I bricked my old French Motorola Defy (MB525, bought with Orange operator). I think I can fix it because I still can access the bootloader and I just have the "Low Battery" error and can't do anything.
So I bought the Chinese version of Defy+, called Motorola XT535 (XT536 in my case but still the same), it's not exactly the same hardware than Defy+ (eg. I have a front camera). But I have the same battery than Defy+.
Here is my old battery :
BF5X
3.7V
1500/1540 mAh
5.6/5.7 Wh
And here is my new one :
HF5X
3.8V
1650 mAh
6.3/6.5 Wh
My question is : Can I charge my old BF5X battery with my new phone ?
Thank you by advance for your answers ! (And sorry for bad English
yes u can use HF5X in defy MB535, but with stock Rom , its charged upto ~80%,
i am using CM10 and using HF5X battery in DEFY MB525(not defy+), its works fine for me
jaims009 said:
yes u can use HF5X in defy MB535, but with stock Rom , its charged upto ~80%,
i am using CM10 and using HF5X battery in DEFY MB525(not defy+), its works fine for me
Click to expand...
Click to collapse
Thank you for reply ! But my question were for the opposite, I meant BF5X into Defy+ (or better XT535).
Thank you again
.
You can use battery from Defy+, but to use his full capacity you have to install the apropriate ROM.
MelquiXDA said:
You can use battery from Defy+, but to use his full capacity you have to install the apropriate ROM.
Click to expand...
Click to collapse
People, I have a defy red lens. I change my old battery for a new one HF5X (1700mAh Defy plus original)
Battery Monitor detect 1500mAh. What I can do for detect right capacity?
Install a CM7 rom for Defy+
Sent from my MB526 using xda app-developers app
jaims009 said:
yes u can use HF5X in defy MB535, but with stock Rom , its charged upto ~80%,
i am using CM10 and using HF5X battery in DEFY MB525(not defy+), its works fine for me
Click to expand...
Click to collapse
So MB525 with CM10 and HF5X battery it works with no problems ?
sebx_g1 said:
So MB525 with CM10 and HF5X battery it works with no problems ?
Click to expand...
Click to collapse
Not problems at all and charges to full 100% but Battery Monitor shows 1500mAh when the battery is 1700mAh.
I dont know what I can do for detect the right capacity.
Hi!
My device shows a different battery percentage when I'm in the bootmenu or booted up into the OS. For instance when the OS warns me to charge the batt., because it's on 1%, the Bootmenu shows <30%.
I TRIED WIPING BATTERY STATS, BUT NOTHING.
Please help, because it's so annoying!!!
Somebody?....................Anybody?...................
According to my knowledge Recovery uses battery voltage to calculate percentage.
Sent from my MB525 using Tapatalk 2
OS display what batt stat give to it with a modified to 1% precision.
So what should I do with it?
Well, if it's happen because of difference voltage messuring method between OS-bootmenu, then I don't think there're any fix.
And why bother? You won't stay in bootmenu so long, right?
You should just ignore bootmenu's batt and care if your OS batt is correctly configured.
intemptesta said:
Well, if it's happen because of difference voltage messuring method between OS-bootmenu, then I don't think there're any fix.
And why bother? You won't stay in bootmenu so long, right?
You should just ignore bootmenu's batt and care if your OS batt is correctly configured.
Click to expand...
Click to collapse
I just can't ignore it, because it drops the battery so quick and when it drains to 1% it stays there in full load for about an hour. I tried to calibrate it and wipe battery stats, even changing battd file from MB525 to MB526 but it's still the same as at the beginning
What battery you're using, 1500 or 1700mAh?
I'm using an aftermarket 1500mAh battery.
Ok, then you should revert your battd back to MB525.
What's rom you're using? If anything I'd try a stable rom like MS2ginger (with the right patch for the lens and no touching defy+ batt patch).
To see if this happens over roms.
I'm using Quarx's CM10. Can you send me a proper link for green lens defy???
While using CM10, have you already fix your battd with this?
http://forum.xda-developers.com/attachment.php?attachmentid=1241322&d=1344093287
It's from CM10 FAQs http://forum.xda-developers.com/showthread.php?t=1795647 "New Battery Fix" to fix for defy 1500mAh battery
(since CM10 default battd files are for Defy+, if I'm not mistaken.)
I used this for my Defy with Momax 1500mAh and no problem with batt % while in OS.
It seems to be successful. I flashed the .zip and my battery on the diagram jumped from 20% to 60% I did it about 2 hours ago and I have no battery drops, so I think it solved my problem
THANK YOU SO MUCH!!! I REALLY APPRECHIATE YOUR HELP!!!