Database Users

[HowTo] Update Your Transformer Without Problems

How many of you have tried updating to a new firmware and you got the yellow exclamation mark?
Well, you probably have a combination of these modifications:
Custom Kernel
ClockworkMod Recovery
Rooted
If you have any of these, this is what you should do.
First, download and run this ONLY FOR INSTALLING/UNINSTALLING STOCK/CLOCKWORKMOD RECOVERY. - Thread
Read the instructions on how to boot into APX Mode.
Backup your /data with CWM.
After you have backed up your data, you should restore the STOCK ROM of your device.
When you get an update, it /should/ complete without any errors.
DO NOT DO ANYTHING TO THE ROM AT THIS POINT.
Alright. So at this point, you should have a completely stock, updated ROM.
Here are the next steps.
DO NOT ROOT YOUR ROM. DO NOT CHANGE A KERNEL.
Boot into APX Mode.
Make a backup of the STOCK Recovery. (Download From Linked Thread If You Haven't.)
Reboot into APX Mode.
Install ClockworkMod Recovery. (Using Brk's RootKit Script.) Once again. Without Rooting. Without changing the kernel.
Update ClockworkMod Recovery to 3.2.0.1. - Thread
Make a backup of EVERYTHING. (boot, system, data, cache, sd-ext).
After the backup is complete, you can ROOT and install a custom Kernel.
When You Get A New Update: DO NOT INSTALL. DO NOT POSTPONE.
Boot into ClockworkMod Recovery.
Restore the stock Boot.
Restore the stock System.
Boot into APX.
Restore stock recovery. (Using Brk's RootKit Script.)
Now everything should be back to stock.
Your data should still be intact.
When you apply the update, it should complete without a hitch.
Complete these steps again to be ready for the next update.
Cheers.

Thanks !! This did the trick for me. Had previously un-rooted and lost the update. Couldnt get it back until I did this !

I have a question.
I used the root method mentioned above a few weeks ago and everything went perfectly. I did not install CWM, only root.
I used the Netflix hack but managed to erase the original lib file.
I received the update and got the yellow exclamation point.
Last night I used BRK's pure root method and attempted to restore boot image and recovery image hoping it would return my lost lib file. I did not attempt to unroot.
When you mention "stock rom", where do I find the stock US rom?
I have an Epic 4G and run custom roms but I think the Transformer is fine and honestly don't care about root now that Netflix and ad-hoc appear to be working. I would like to end up with a stock Transformer that receives regular updates.
Is this the method for me, or something else?
Thanks

bmcgarry67 said:
I have a question.
I used the root method mentioned above a few weeks ago and everything went perfectly. I did not install CWM, only root.
I used the Netflix hack but managed to erase the original lib file.
I received the update and got the yellow exclamation point.
Last night I used BRK's pure root method and attempted to restore boot image and recovery image hoping it would return my lost lib file. I did not attempt to unroot.
When you mention "stock rom", where do I find the stock US rom?
I have an Epic 4G and run custom roms but I think the Transformer is fine and honestly don't care about root now that Netflix and ad-hoc appear to be working. I would like to end up with a stock Transformer that receives regular updates.
Is this the method for me, or something else?
Thanks
Click to expand...
Click to collapse
You should go here: http://tabletroms.com/forums/transf...stock-3-2-recovery-roms-unbricking-tools.html
Make sure you backup your data for your applications and the internal sdcard. They will be erased.
Install the 8.4.4.5.
Then you should go here and update to the latest version they have available.
Follow the instructions for this.
http://www.asus.com/Eee/Eee_Pad/Eee_Pad_Transformer_TF101/#download
Select Android and download your firmware.
Then you should get your update working after that.
Use this guide, then restore your data using clockworkmod.

Thanks and follow up
The Dark Lestat said:
You should go here:
Make sure you backup your data for your applications and the internal sdcard. They will be erased.
Install the 8.4.4.5.
Then you should go here and update to the latest version they have available.
Follow the instructions for this.
Select Android and download your firmware.
Then you should get your update working after that.
Use this guide, then restore your data using clockworkmod.
Click to expand...
Click to collapse
I just had a couple of questions?
You mentioned updating to 8.4.4.5, them updating to 8.6.5.6.
They have the NVFlash with 8.6.5.6. Has that changed since you advised me or should I do it in 2 steps?
Do I download the Asus Rom to the transformer or download to computer, then copy to SD card to install?
Now, I just noticed that 8.6.5.9US is available from Asus. Does this change my procedure?
Thanks again

bmcgarry67 said:
I just had a couple of questions?
You mentioned updating to 8.4.4.5, them updating to 8.6.5.6.
They have the NVFlash with 8.6.5.6. Has that changed since you advised me or should I do it in 2 steps?
Do I download the Asus Rom to the transformer or download to computer, then copy to SD card to install?
Now, I just noticed that 8.6.5.9US is available from Asus. Does this change my procedure?
Thanks again
Click to expand...
Click to collapse
When I NVFlashed to 8.6.5.6, I could not receive the update.
Since I used the file from Asus to update, it enabled FOTA somehow.
Anyways, the guide is the same.
If 8.6.5.6 is available, then you can NVFlash 8.6.5.6, then download and update to 8.6.5.9

Thank you.
I NVFlashed to 8.6.5.6 and wiped everything.
The FOTA arrived immediately and updated flawlessly.
Thanks again

Is this update even worth unrooting then root again?

it does fix the issue with browser shortcuts. You no longer have to rotate the screen.

I have not played with it. But it is said to allow Netflix and adhoc without root and patches. Those were the 2 reasons that I rooted.

Why jump through all these hoops?
Step 1: Download the clockworkmod update posted.
Step 2: Flash it.

daoist said:
Why jump through all these hoops?
Step 1: Download the clockworkmod update posted.
Step 2: Flash it.
Click to expand...
Click to collapse
Because if you do that, for some reason, FOTA doesn't enable.
AND you will have to wait for a flashible zip to become available.
Not hoops.
I've already tested that route. It didn't work for me.

bmcgarry67 said:
I have not played with it. But it is said to allow Netflix and adhoc without root and patches. Those were the 2 reasons that I rooted.
Click to expand...
Click to collapse
Has this been verified?

pigskins said:
Has this been verified?
Click to expand...
Click to collapse
Verified.
Netflix and Adhoc work WITHOUT root.
No need to root for those two options.
I personally root because of Titanium Backup.
Even if I have CWM installed.

The Dark Lestat said:
Verified.
Netflix and Adhoc work WITHOUT root.
No need to root for those two options.
I personally root because of Titanium Backup.
Even if I have CWM installed.
Click to expand...
Click to collapse
TY!
Did you root after getting the update and if so, how? Did you follow the steps in this thread?

pigskins said:
TY!
Did you root after getting the update and if so, how? Did you follow the steps in this thread?
Click to expand...
Click to collapse
Yes. The thread that I posted has all the updated CWM and Root methods. You can use those to root.

The Dark Lestat said:
Because if you do that, for some reason, FOTA doesn't enable.
AND you will have to wait for a flashible zip to become available.
Not hoops.
I've already tested that route. It didn't work for me.
Click to expand...
Click to collapse
Why do you want FOTA enabled?
Why be bothered when a release that won't work (without jumping through hoops) is available?
The whole point of installing CWM is that you're going to be managing your tablet rather than letting ASUS do it. If you're going to unroot, FOTA, and reroot every time, just leave it unrooted.

I had successfully update my transformer through OTA without doing all those steps. I just had to root it again after update is done.

daoist said:
Why do you want FOTA enabled?
Why be bothered when a release that won't work (without jumping through hoops) is available?
The whole point of installing CWM is that you're going to be managing your tablet rather than letting ASUS do it. If you're going to unroot, FOTA, and reroot every time, just leave it unrooted.
Click to expand...
Click to collapse
You don't have to root to use CWM. FOTA won't work with CWM.
I use Root only for setCPU and Titanium.
I like getting the update as soon as possible. Not waiting a couple days for it.
Sei911 said:
I had successfully update my transformer through OTA without doing all those steps. I just had to root it again after update is done.
Click to expand...
Click to collapse
If you just rooted and did not make any changes to the system, then in theory, it should work. Depending on the root method.

Little bit confused

I've been looking at the threads but so far I don't believe there's one that tells you what to do if you've actually installed the official OTA update?
I.e. I have an rooted 2.3.4 GT-I9023 with an unlocked bootloader. With no clockwork or anything, as to be honest the last time I used it (on my old HTC DHD) it made my phone unstable (the phone would sometimes boot up of its own accord and stop at the clockwork screen).
Does anyone know how to re-root the NS after it's installed the official OTA update without clockwork?
Thanks
Edit: Downloading the OTA update won't relock the boot-loader will it?

dccxviii said:
I've been looking at the threads but so far I don't believe there's one that tells you what to do if you've actually installed the official OTA update?
I.e. I have an rooted 2.3.4 GT-I9023 with an unlocked bootloader. With no clockwork or anything, as to be honest the last time I used it (on my old HTC DHD) it made my phone unstable (the phone would sometimes boot up of its own accord and stop at the clockwork screen).
Does anyone know how to re-root the NS after it's installed the official OTA update without clockwork?
Thanks
Edit: Downloading the OTA update won't relock the boot-loader will it?
Click to expand...
Click to collapse
You cannot get root back without a custom recovery. OTA will not relock the bootloader, you'll just lose root and custom recovery.
You need to flash custom recovery using fastboot, then flash superuser to get root back. There are plenty of guides in the stickies describing the process.

Ok, so i'm updated to 2.3.6 but of course have lost root (never had CWM to begin with on this phone). Anyone know where I can DL CWM (i'm assuming it needs to be flashed via platform-tools directory in the android sdk per normal) and the latest su file?
EDIT: nvm, I found the latest CWM and successful flashed (my method was correct). However I've not been able to find the latest superuser.zip to flash yet. Also, I don't know why ppl say to use the market as I don't see how that method can work. I've already got superuser installed from before I updated but that doesn't help me get root. Only flashing the zip from recovery (as I understand it) would. Which renders the market useless in this regard.
/confused

The superuser app checks to see if you have the latest superuser binary and will download and instalk it. Or download superuser from within rom manager.
Sent from my Nexus S 4G using xda premium

Ok..the binary update fails (because i don't have root) so it's chicken and egg as far as I can tell.

You where already told. Flash custom recovery via fastboot. Boot into it and flash su.zip Same way it was done prior to update to the ota. Same as it always was and will be.

dccxviii said:
Ok, so i'm updated to 2.3.6 but of course have lost root (never had CWM to begin with on this phone). Anyone know where I can DL CWM (i'm assuming it needs to be flashed via platform-tools directory in the android sdk per normal) and the latest su file?
EDIT: nvm, I found the latest CWM and successful flashed (my method was correct). However I've not been able to find the latest superuser.zip to flash yet. Also, I don't know why ppl say to use the market as I don't see how that method can work. I've already got superuser installed from before I updated but that doesn't help me get root. Only flashing the zip from recovery (as I understand it) would. Which renders the market useless in this regard.
/confused
Click to expand...
Click to collapse
You can find superuser zip here:
http://rootzwiki.com/showthread.php?231-Superuser-2.3.6.3-17-June-2011&
3rd one down, efgh.
Flash in custom recovery.

albundy2010 said:
You where already told. Flash custom recovery via fastboot. Boot into it and flash su.zip Same way it was done prior to update to the ota. Same as it always was and will be.
Click to expand...
Click to collapse
You've misunderstood what i'm after. Thanks for trying to help tho
irishrally said:
You can find superuser zip here:
http://rootzwiki.com/showthread.php?231-Superuser-2.3.6.3-17-June-2011&
3rd one down, efgh.
Flash in custom recovery.
Click to expand...
Click to collapse
Thanks! As far as I can tell you're the first with the link I was after the entire time.
EDIT: Bah, I get a signature verification error when applying the update >.<

dccxviii said:
You've misunderstood what i'm after. Thanks for trying to help tho
Thanks! As far as I can tell you're the first with the link I was after the entire time.
EDIT: Bah, I get a signature verification error when applying the update >.<
Click to expand...
Click to collapse
Turn off signature verification in CWM and try again.

irishrally said:
Turn off signature verification in CWM and try again.
Click to expand...
Click to collapse
Turns out that CWM got overwritten by stock android recovery. Re-flashing CWM and then flashing su did the trick. I'm rooted once more!
Thanks for your help kind sir!
Curious as to how to make CWM stick for next time tho *shrug*

dccxviii said:
Turns out that CWM got overwritten by stock android recovery. Re-flashing CWM and then flashing su did the trick. I'm rooted once more!
Thanks for your help kind sir!
Curious as to how to make CWM stick for next time tho *shrug*
Click to expand...
Click to collapse
You're welcome.
If you stick with a stock ROM then recovery will reflash every time you reboot. To prevent this you can go to system>etc, and change the file install-recovery.init to something else like install-recovery.init.bak.

[Q] Need help with unroot and return to stock

I need some help unrooting and returning to stock. I rooted the device using the method of returning back to 3.1 and flashing the unstable rom then installing iconia root then acer recovery to install CWM. After rooting I did not make a backup of my device so I have lost the original rom. This is an Acer Iconia A500 with 8gb internal storage bought from Best Buy on black friday. I've read through many forums in the development area but since I have not posted enough times I can not ask a question there. Any help would be greatly appreciated.

todds67 said:
I need some help unrooting and returning to stock. I rooted the device using the method of returning back to 3.1 and flashing the unstable rom then installing iconia root then acer recovery to install CWM. After rooting I did not make a backup of my device so I have lost the original rom. This is an Acer Iconia A500 with 8gb internal storage bought from Best Buy on black friday. I've read through many forums in the development area but since I have not posted enough times I can not ask a question there. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Basically, when you run a full package stock rom, it should put your tablet back into stock condition. This will remove the custom recovery, just like it did when you downgraded.
You can find a list of the stock roms based on region at this link.
http://forum.xda-developers.com/showthread.php?t=1113878
Vache put some instructions there, and it's pretty simple.

Sorry, I'm new, and have the same question.
I am confused, for clarification ....
If you are unrooting and have Clock Work Mod Recovery what do you have to do?
I used Acer Recovery Installer from the market to install clock work mod. If I am unrooting and returning to sock, should I use the option to install "Stock USA 1.41.07_COM_GEN1 recovery" before flashing and then use the power/up button combination? Is it Ok to use Clock Work Mod to install one of the stock roms from the SD card or will Clock Work Mod cause a mess?

blancocar said:
Sorry, I'm new, and have the same question.
I am confused, for clarification ....
If you are unrooting and have Clock Work Mod Recovery what do you have to do?
I used Acer Recovery Installer from the market to install clock work mod. If I am unrooting and returning to sock, should I use the option to install "Stock USA 1.41.07_COM_GEN1 recovery" before flashing and then use the power/up button combination? Is it Ok to use Clock Work Mod to install one of the stock roms from the SD card or will Clock Work Mod cause a mess?
Click to expand...
Click to collapse
Vache has simple instructions on that page. As you read, it says to extract the update.zip file, put it to sd, then hold vol- and pwr. It should flash the rom, That's for the update zip..
However, I would use one of the full set roms.
When the stock rom runs, it should overwrite the CWM recovery, and re-instate the factory bootloader.
Here are the instructions direct from Vache's page for full rom.
"Here are some full packages, updates and EUU firmware from Acer OTA server and from some magical sources.
Full package and updates should be flash via the recovery.
EUU version are working in APX mode with nvflash. (you can enter in APX mode by booting the tablet with Reset / Power pressed)"
Now, what other recovery do you have to flash a full rom?
NOTE: I have not and have no plans to revert to stock. So I've never done this. You may want to post a question also in that thread to see if you can get any extra info.

Moscow Desire said:
Vache has simple instructions on that page. As you read, it says to extract the update.zip file, put it to sd, then hold vol- and pwr. It should flash the rom, That's for the update zip..
However, I would use one of the full set roms.
When the stock rom runs, it should overwrite the CWM recovery, and re-instate the factory bootloader.
Click to expand...
Click to collapse
You could also use the Downgrade tool with the original downgrade images. The original downgrade tool will put back factory recovery and factory stock. This would be everything you need to be totally stock. Once you get to stock, then you can just apply the OTA's if that's what you want. Or are you trying to get to stock and then root?

timmyDean said:
You could also use the Downgrade tool with the original downgrade images. The original downgrade tool will put back factory recovery and factory stock. This would be everything you need to be totally stock. Once you get to stock, then you can just apply the OTA's if that's what you want. Or are you trying to get to stock and then root?
Click to expand...
Click to collapse
Yeah, I keep forgetting about your tool.
I think they just want to get back to a stock condition without cwm and root.
You may want to post a link to the tool.

Finally got it. Used the Acer recovery tool to flash Acer stock recovery image and then extracted the update zip from the full package and put it on my SD card (made sure it was the only zip on the card) then redooted into recovery by holding down the volume up key and the power button. Update flashed and all is back to stock. Reasons for doing this were that I could not find a ROM that seemed like it was a real improvement over stock. My favorite would have been Thor's ROM mostly due to the ice cream sandwich tweaks and the ability to clear the recent apps drawer. May go back to root but wanted to know how to get back if necessary. Thanks for all the help.
Sent from my A500 using xda premium

todds, Which stock recovery image did you flash? and which update zip did you install after that?
i want to install the european (swedish) everything stock and would really appreciate some help.

todds67 said:
Finally got it. Used the Acer recovery tool to flash Acer stock recovery image and then extracted the update zip from the full package and put it on my SD card (made sure it was the only zip on the card) then redooted into recovery by holding down the volume up key and the power button. Update flashed and all is back to stock. Reasons for doing this were that I could not find a ROM that seemed like it was a real improvement over stock. My favorite would have been Thor's ROM mostly due to the ice cream sandwich tweaks and the ability to clear the recent apps drawer. May go back to root but wanted to know how to get back if necessary. Thanks for all the help.
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Glad it worked for you!
Vache should be a touch more clear on "which" recovery to use for the full package
Although it seems people used both CWM and Acer Recovery. (he just states "recovery")
Glad you cleared that up
---------- Post added at 10:26 AM ---------- Previous post was at 10:10 AM ----------
sydeu said:
todds, Which stock recovery image did you flash? and which update zip did you install after that?
i want to install the european (swedish) everything stock and would really appreciate some help.
Click to expand...
Click to collapse
@sydeu, you probably want to run Acer_A501_4.037.01_EMEA_TMPL. Note this is for the 501 so not sure if you are looking for a 501 or 500 stock rom.
I run it on my 501, and it has svetski lauguage support.
I think you can use any of the EMEA roms. You can unpack or decrypt the roms before flashing, and check the ldb files (system\usr\xt9\databases\ldb\) You should see an ldb that usually starts or contains "Sv". I think these are related to the keyboard, but it will have system support for the language.
Not all roms and updates are listed there, those are just the ones people were able to find. So get the one that's closest to your needs.

[TIPS AND DISCUSS] ICS update DOES NOT *ALWAYS* BREAK ROOT (& other tips and reviews)

[TIPS AND DISCUSS] ICS update DOES NOT *ALWAYS* BREAK ROOT (& other tips and reviews)
This is not intended to be a bug-sharing thread, report them if you wish, but I'm sure there will be entire threads devoted to this, so keep this in mind when posting.
Yep, that's all I had to say, but if I posted in any of the ICS threads it would be buried. Dlpkgfile available HERE NOW!

luna_c666 said:
Yep, that's all I had to say, but if I posted in any of the ICS threads it would be buried. Dlpkgfile available HERE NOW!
Click to expand...
Click to collapse
Cheers luna ... just need a WW version
Noob question though ..... I am on a custom ROM. I have CWM recovery.
I thought I couldnt update OTA if my TF was rooted ? or is it that I have the custom recovery that prevents this ?
I can flash back to stock easily - its removing CWM and unrooting that looked to be the more techie issue.
With what you are saying is there an easy way, once I have reverted to stock ROM, to revert to stock recovery without losing root ? Or do i even need to revert to stock ROM ??

Can update if rooted, but need to be on a stock ROM and stock Recovery image in order to successfully install. Download the 8.2.3.5 US recovery file located here :http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/, flash it through CWM and you have now overwritten your CWM and gone back to stock. Ready to update from there. Cheers!

so what is the procedure to update? Rename it, put it in microsd root and reboot into recovery?
another question, i cannot root with nachoroot, so is it possible to root with 1-click root?

asder00 said:
so what is the procedure to update? Rename it, put it in microsd root and reboot into recovery?
Click to expand...
Click to collapse
That might work, I don't know exactly because I got the FOTA pushed to my device and updated through the 'official' update process. I honestly have no idea how the dlpkgfile is even packaged, if it is CWM flashable or requires stock recovery etc., honestly my first time fooling with capturing the OTA files.

Ok I'm trying and I will tell u....
I don't care about root right now...

luna_c666 said:
Can update if rooted, but need to be on a stock ROM and stock Recovery image in order to successfully install. Download the 8.2.3.5 US recovery file located here :http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/, flash it through CWM and you have now overwritten your CWM and gone back to stock. Ready to update from there. Cheers!
Click to expand...
Click to collapse
Do I understand correctly that I only have to do Step 7 of the tutorial? and then install ICS (regular update process)?
I am rooted and I have CWM (no custom ROM)

So first impressions luna? Might as well start a discussion to keep the post on top and visible.
Did you run Spark? If so how does it compare?
Positives negatvies
Yes I do realise that you have had it for like 12 seconds but first impressions are nice.
Sent from my Sparkified TF101

Dreamboxuser said:
So first impressions luna? Might as well start a discussion to keep the post on top and visible.
Did you run Spark? If so how does it compare?
Positives negatvies
Yes I do realise that you have had it for like 12 seconds but first impressions are nice.
Sent from my Sparkified TF101
Click to expand...
Click to collapse
Unfortunately I never did get around to trying the latest Spark, I saw the complaints about touchscreen issues and decided it might be best to wait for Paul to work it out, but Asus finally got the upper hand on him!
Seems a treat, but I expected as you can see I've been running CM9 on my epic for about 3 weeks now. Much snappier, generic comments that have already been posted- but not explored completely yet, too busy helping others get their own ICS since the update came in to be selfish and sign off yet
Steven, I'm not sure which step 7 you are referring to but you will need a stock recovery in order to flash the file. CWM will flash files that have been repacked for CWM usually, and OTA updates install from the cache partition so CWM will not be able to install the OTA. CWM can flash it manually, I THINK (not sure if it needs to be repackaged for that to occur or not), but CWM will not install the OTA through the normal OTA process.

luna_c666 said:
Steven, I'm not sure which step 7 you are referring to but you will need a stock recovery in order to flash the file. CWM will flash files that have been repacked for CWM usually, and OTA updates install from the cache partition so CWM will not be able to install the OTA. CWM can flash it manually, I THINK (not sure if it needs to be repackaged for that to occur or not), but CWM will not install the OTA through the normal OTA process.
Click to expand...
Click to collapse
I was refering to step 7 on the Unlocker page you pointed to:
http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
So in short only replace the recovery as explained in pojnt 7 (and 8) of that page and then do a regular system update to ICS.
No need to unroot??
Will this keep my apps and settings? I do have Titanium so I can do a backup and restore that way.
Thanks a lot for helping!!

Steven_nl said:
I was refering to step 7 on the Unlocker page you pointed to:
http://theunlockr.com/2011/11/28/how-to-unroot-and-remove-cwm-recovery-on-asus-transformer/
So in short only replace the recovery as explained in pojnt 7 (and 8) of that page and then do a regular system update to ICS.
No need to unroot??
Will this keep my apps and settings? I do have Titanium so I can do a backup and restore that way.
Thanks a lot for helping!!
Click to expand...
Click to collapse
Yes, your apps and data should remain intact, and that is correct, you only need to flash the recovery back to stock if you are already on a stock ROM. As of right now, only US and TW firmware versions are getting the OTA pushed to their device, but if you are not one of these you can manually flash to these stock ROMs via CWM if need be. But yes, if you are stock + root + CWM, you only need to flash over CWM back to stock. Root is fine to keep and all data will be saved (it is an official update, people would be irate if it wiped their data you know!)

Great stuff thanks again. I'n in Europe so I might need to wait for a bit but that is fine.

No problem. Ok guys, I've done a bunch of talking and answered quite a few PMs, and posted all my methods/experience with ICS so far, now, I'm going to go play for a while (it's 7am, and I've not been to bed, and I have to work at 4pm and my son will likely be up in an hour, so no sleep for me today, should have a well-rounded review by the time you see me again)
If you guys want to keep this thread alive, have at it! Turn it into a discussion.. See you guys in a while, can't wait to see what I miss while I'm gone

Well I did the update with root disabled with rootkeeper but now rootkeeper will not restore Root.
I guess I should of read thi before updating
Anyone in the same state?

dmazyn said:
Well I did the update with root disabled with rootkeeper but now rootkeeper will not restore Root.
I guess I should of read thi before updating
Anyone in the same state?
Click to expand...
Click to collapse
If you are SBK1 device you can flash CWM via NVFlash, use CWM to flash SU binary from ChainsDD (located HERE ) and then flash the stock recovery if you so choose to return to stock recovery (in case any patches or incremental updates come out you may need this if you want to stay stock ICS).
ONE MORE THING BEFORE I GO GUYS;
I just noticed that ICS brings a new recovery as well, so the update will overwrite your recovery, I assume it will do this if you figure out how to flash via CWM so be prepared for that. Any devs will want to work on removing the recovery blob from the patch file before releasing as a CWM flashable zip. My 2 cents. See you guys in a few hours/days, depending on how addicted I get to ICS.

Your dlpkgfile didn't work.. i need the WW version
Anyway I've rooted with nachoroot with stock asus recovery, waiting for ics update via FOTA

asder00 said:
Your dlpkgfile didn't work.. i need the WW version
Anyway I've rooted with nachoroot with stock asus recovery, waiting for ics update via FOTA
Click to expand...
Click to collapse
You need to reflash with a US version not WW.
Sent from my Sparkified TF101

Confirmed working! thanks. too bad i have to go straight to work

Dreamboxuser said:
You need to reflash with a US version not WW.
Sent from my Sparkified TF101
Click to expand...
Click to collapse
Ur right but i prefer to wait for ww

luna_c666 said:
Yep, that's all I had to say, but if I posted in any of the ICS threads it would be buried.
Click to expand...
Click to collapse
After I updated to ICS, OTA Rootkeeper gave me the option to Restore root. Under the status section, Device rooted and Root permission granted were both unchecked until I used the Restore root option.

It's serious: I need help... flashing stock A501 rom

Hi,
atm, I have an A501 with CWM-based Recovery v5.5.0.x(thor2002ro rev1.7) and Android 3.2 (EMEA CUS7 - Germany).
My Tab tells me that there is an update, which I downloaded and tried to install. However, after a few seconds an Android with a red exclamation mark appears and the installation of the updates aborts.
So, I want to remove CWM Recovery and root and return to a stock rom. However, that seems impossible. I downloaded the Acer Recovery Installer App but this one offers me a USA A500 stock rom - but I need an A501 rom because of 3g.
When I try to install this one (http://forum.xda-developers.com/showthread.php?t=1234039) I decrypted before, CWM tells me
"Installating update...
Installation aborted"
So, this does not work either.
I am really desperate because I have to revert to a stock rom...
Can someone please, please, please help me out?

lamajstro said:
Hi,
My Tab tells me that there is an update, which I downloaded and tried to install. However, after a few seconds an Android with a red exclamation mark appears and the installation of the updates aborts.
Click to expand...
Click to collapse
The update has overwritten yr custom recovery with the Acer stock recovery. It also checks yr system files if it ain't completely stock it will abort. being rooted can also affect the update.
but I need an A501 rom because of 3g.
When I try to install this one (http://forum.xda-developers.com/showthread.php?t=1234039) I decrypted before, CWM tells me
"Installating update...
Installation aborted";
Click to expand...
Click to collapse
Did u install cwm again from Acer recovery installer b4 flashing. the rom?
I'm unfamiliar with the 501 and what stock Roms are available for it
Search xda for vache full ota update packages and see if there's one that thread
So, I want to remove CWM Recovery and root and return to a stock rom.
Click to expand...
Click to collapse
Why not give HC the flick and upgrade to a custom ICS rom?

dibb_nz said:
The update has overwritten yr custom recovery with the Acer stock recovery. It also checks yr system files if it ain't completely stock it will abort. being rooted can also affect the update.
Did u install cwm again from Acer recovery installer b4 flashing. the rom?
I'm unfamiliar with the 501 and what stock Roms are available for it
Search xda for vache full ota update packages and see if there's one that thread
Why not give HC the flick and upgrade to a custom ICS rom?
Click to expand...
Click to collapse
Thank you a lot for your answer!
Yes, I did install cwm again from acer recovery installer, but that did not change anything.
Unfortunately none of the roms offered on xda work, they all abort in cwm and I don't know why.
I would prefer to go back to a stock rom with stock recovery because I want to give the tab to someone else.

lamajstro said:
Thank you a lot for your answer!
Yes, I did install cwm again from acer recovery installer, but that did not change anything.
Unfortunately none of the roms offered on xda work, they all abort in cwm and I don't know why.
I would prefer to go back to a stock rom with stock recovery because I want to give the tab to someone else.
Click to expand...
Click to collapse
Yeah, you may have difficulties flashing full packages via CWM. Especially if you didn't decrypt the rom first.
I've got a few 501 roms you can try. All HC 3.2.
One of them, is an ATT full package update which will probably work for you. Just pull the update.zip out of it. Put it on your Ext SD card, and boot holding PWR and Vol+. This will force it to install update.zip from the SD card.
Any rom you use, you have to decrypt it first. Some try renaming the rom to update.zip, and some have success using this method.
Like I say, it's an AT&T rom, but is probably really a ComGen 1. So it should have decent language support.
If you're interested, I can throw them up on a server tomorrow.
But I tell you this first, before you go messing around with these things. GET YOUR UID Number first, and write it down. You can get instructions on UID in the Development Forum, 1st page usually. It's easy.
MD

lamajstro said:
Thank you a lot for your answer!
Yes, I did install cwm again from acer recovery installer, but that did not change anything.
Unfortunately none of the roms offered on xda work, they all abort in cwm and I don't know why.
I would prefer to go back to a stock rom with stock recovery because I want to give the tab to someone else.
Click to expand...
Click to collapse
Sent from my A500 using Tapatalk 2
No probs!!
U must use a "update.zip" , decrypted first as Moscow said, and booting into recovery via button combo may help too,
also remember to remove the zip file off the ext. sdcard when you are done!!
....good luck