Pink colors after update to ics - Galaxy Note GT-N7000 General

I get a problem after update my galaxy note to ics official. I dont have white colors on my screen... just pink glow. help!! sorry for my english

Try maybe restarting your phone, if that doesnt work. Try pulling out the battery and wait 5 minutes then put it back in and start the phone again..

Rivan_92 said:
Try maybe restarting your phone, if that doesnt work. Try pulling out the battery and wait 5 minutes then put it back in and start the phone again..
Click to expand...
Click to collapse
I try this like a 20 times and nothing

mybe some kernel can fix this ??

during the boot up sequence does the colors of the Samsung logo look correct ?

hiroko83 said:
during the boot up sequence does the colors of the Samsung logo look correct ?
Click to expand...
Click to collapse
no its pink. only when i do sequence home vol down power colors looks normal

when I turn on the phone colors are good for few seconds and than its comming a pink glow

The same Here! Try to flash 4.0.4 on sammobile.com... I'm on GB!

Filipeknot said:
The same Here! Try to flash 4.0.4 on sammobile.com... I'm on GB!
Click to expand...
Click to collapse
I try this also. I have a good colors only when Im back to 2.3.6 but I want Ics. ****

wally1308 said:
I try this also. I have a good colors only when Im back to 2.3.6 but I want Ics. ****
Click to expand...
Click to collapse
Try to install GB, root, flash abyssnote kernel. Download Some ICS with .zip extension and flash all files except the kernel.
If this wont fix your problem, i will send my note to service center...

and still the same problem. nothings helps.

Can somebody help me
Sent from my GT-N7000 using xda premium

I've sent my Galaxy Note to Service Center...
The mainboard was with problem (HARDBRICK by MMC_CAP_ERASE) and was replaced by a new one.
The display was with problem (PINK COLOR) and was replaced by a new one too.

Related

[Q] Galaxy 3 Custom Rom BY motafoca

This is the thread i'm taking about
http://forum.xda-developers.com/showthread.php?t=931511
I know the custom rom is still not finished yet.. but can some one tell me how do i use these beta(pre-releases) which are listed in these thread...
step by step guide if possible...
There is quide in the original thread... if thats not enough read: how to flash i5800.
Sent from my GT-I5800 using XDA App
jazux said:
There is quide in the original thread... if thats not enough read: how to flash i5800.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
what are the improvements and bugs of motafoca rom ? thanks
IT WORKED!
jazux said:
There is quide in the original thread... if thats not enough read: how to flash i5800.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
WOW it worked:
What i did:
1. Downloaded the custom ROM (only the PDA file basically)
2. Loaded JPF ROM To ODIN normally, using all the original files
3.HOLD POWER+VOLUME DOWN+HOME Download mode
4. Flashed it, once it was successful I loaded to Odin ONLY the PDA file which came with the custom ROM package
IT DID NOT Booted successfully
5. Turn off the phone
6.Hold POWER+VOLUME+HOME keys together
Selected Factory rest/wipe data
7.Rebooted WOW IT WORKED!
I have the same problem as you. I can´t loaded the phone after succesfull flash. But you wrote that you downloaded some PDA file too, but I haven´t got smt like this in download Please, can you help me? thanks
kozusnik said:
I have the same problem as you. I can´t loaded the phone after succesfull flash. But you wrote that you downloaded some PDA file too, but I haven´t got smt like this in download Please, can you help me? thanks
Click to expand...
Click to collapse
go here i'm sure you will find the file in here
http://forum.xda-developers.com/showthread.php?t=931511
can you please post some screen shots so that if we like the look and feel , even we ll install it
rudolf895 said:
go here i'm sure you will find the file in here
http://forum.xda-developers.com/showthread.php?t=931511
Click to expand...
Click to collapse
At page 5 its a dowload link
Sent from my GT-I5800 using XDA App
Works it? Is it stable? I have ultra clean rom JPF, will it work? Whats quadrant score of this rom?
Sent from my GT-I5800 using XDA App
its not a good rom...
1. looks really bad, (looks) not at all impressive...
2. i dont see any improved speed.....
i guess gsam's stock aosp 0.1 custom rom is 100 times better than this.....
gsam , if u are seeing this, please we want next updated version of your great rom..
Link? I didnt saw any custom roms for our phone only this and something in General, i searched bad, right?
EDIT: its ok, link was found
SG 3, 2.2 JPF ultra clean, rooted
http://forum.xda-developers.com/showthread.php?t=950560
any link for any roms/fixes/themes for galaxy 3 can be found here
Hmm,
I think the custom rom by Motafoca is uite good. Atleast no bugs till now, and great battery life. As for the looks I dont think it is any different to the other ROMS. It is just a matter of installing a launcher of your choice if you dont like Ream launcher.
By the way combined with your glossy green framework everythink looks enticing!
By the way Nakul, is there a chance of having that green themes of yours in other colors too? Like sky blue maybe??
Saka911 said:
Hmm,
I think the custom rom by Motafoca is uite good. Atleast no bugs till now, and great battery life. As for the looks I dont think it is any different to the other ROMS. It is just a matter of installing a launcher of your choice if you dont like Ream launcher.
By the way combined with your glossy green framework everythink looks enticing!
By the way Nakul, is there a chance of having that green themes of yours in other colors too? Like sky blue maybe??
Click to expand...
Click to collapse
yes thats exactly i am gonna release another theme.....
blue coloured with entirely different icons..
and hope if dark lestats deodexed rom is up, my theme would be full coz the stock apps would also then can be changed.....
Tried this rom.
Hi. Just like to share my brief experience with this rom and highlight a problem to the dev. Everything was fine, but the samsung keypad no longer worked well. It could only input numbers in the portrait 3x4 mode. The reason why I'm using the 3x4 is because this phone's my mom's and it's much easier for her to hit the larger 3x4 buttons than the smaller ones on the Qwerty keyboard.
Thank you motafoca!

[Q] Menu button light is not working :crying:

I am running CM10 latest Quarx build on my Defy+ with bl7 after installing the update, menu button light is not working :crying: Is there any way to get it back I tried rolling it back to the CM7 but no use. Any help is really appreciated. Sorry for my bad English...!!
I have the same problem, and the exact same button
I think the led behind that button is not working anymore...
Try to install the CM as indicated in the topics (respect the steps). Do it from begining carefully (flash the stock ROM).
Same here
Sent from my MB526 using xda app-developers app
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
hacktheheaven said:
Started from the scratch by flashing SBF-->> rooting--->> Installed Cm7 (Quarx build) But still no luck...!!! :crying: Back to Awesome Cm10 by Quarx
Click to expand...
Click to collapse
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Thanx for the reply
pgreed said:
If I understood right you wanna install CM7.2. For that to work is good that after flashing stock ROM and installing 2ndinit to reboot and from stable recovery to format data/cache and dalvik on ext3 followed by flashing custom CM7.2 (I suggest you to try another CM7.2 mod).
Click to expand...
Click to collapse
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
hacktheheaven said:
My actual problem is not with the Rom. Menu button light stopped glowing right after shifting from cm7 to cm10 :crying: Sorry for my bad English.
Click to expand...
Click to collapse
I think the high brightness settings would have burned it
Then there is no way to get it back......!! Wish I didn't mess with that settings....
Sent from my MB526 using xda app-developers app
hacktheheaven said:
Wish I didn't mess with that settings....
Click to expand...
Click to collapse
I didn't messed with buttons lights, and still got 3 burned LEDs. The first to go was "search". A month after that, the "menu" button went dark. Now the "back" is gone too. Just "home" remains with light. I don't think it's a software issue... More likely a project flaw or bad manufacturing (I still use CM7, no tweaks).
Last week I also got a "stain" (a lot of bad pixels) on the center of the screen. Just turned the phone off and put it in the freezer for 12 hours. After that, it was new again (lucky me). Yeah, the famous trick works folks (unfortunally, not for the capacitive LEDs though).
Floripa said:
I don't think it's a software issue... More likely a project flaw or bad manufacturing
Click to expand...
Click to collapse
I'm inclined to agree. It seems fairly common. My menu button LED failed when my Defy+ was around 6 months old and completely stock. I put it down to a hardware failure.
Time for me to claim the Warranty
I will unroot the device and will claim the warranty...!! :good: But only problem is I have to wait untill the device returns back and have to use that ****sung again sorry Typo Samsung* :crying:

Urgent Help requered??

Today i flash custom rom
everything is ok
only when phone start screen on samsung logo left uper corner red and yellow text too small not readable.
plz help how can i clear it and why it shows????
and plz guide me easy way of calibration.
relisys667 said:
Today i flash custom rom
everything is ok
only when phone start screen on samsung logo left uper corner red and yellow text too small not readable.
plz help how can i clear it and why it shows????
and plz guide me easy way of calibration.
Click to expand...
Click to collapse
Can you provide a photo..this generally happens when you boot into recovery..
Is your rom running fine?
Calibration..download an app for that..any which requires root..
Plus what you can do is..in the recovery-->advanced----> clear battery.stats.
^_^
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
DeepankarS said:
Can you provide a photo..this generally happens when you boot into recovery..
Is your rom running fine?
Calibration..download an app for that..any which requires root..
Plus what you can do is..in the recovery-->advanced----> clear battery.stats.
^_^
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Click to expand...
Click to collapse
its too small
hardly read in yellow set warenty kernel
rom is running very good and flash mod using phoenix rom
relisys667 said:
its too small
hardly read in yellow set warenty kernel
rom is running very good and flash mod using phoenix rom
Click to expand...
Click to collapse
I dont know..maybe something related to the bootanimation? Or the kernel?
Try changing them?
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
It's a normal message. Ignore it. Everyone has it that has a custom kernel.

charging power off not working

Hi all,
I got a problem when i m tryin to charge my phone.
When is on i got no problem to charge it but when is power off
I can t charge it.when i plug the cable , i feel an vibration the screen turn on , i can see batterie logo in the middle of the screen for 5 secondes max and it turn off .
If any body got yhe same problem.
Thx.
Galaxy note 3.
Recovery custom: twrp
Rom: cyanogenmod 12.1
Band version:n9005xxugng1
mrvegas06 said:
Hi all,
I got a problem when i m tryin to charge my phone.
When is on i got no problem to charge it but when is power off
I can t charge it.when i plug the cable , i feel an vibration the screen turn on , i can see batterie logo in the middle of the screen for 5 secondes max and it turn off .
If any body got yhe same problem.
Thx.
Galaxy note 3.
Recovery custom: twrp
Rom: cyanogenmod 12.1
Band version:n9005xxugng1
Click to expand...
Click to collapse
try to flash original recovery
boyrobbie said:
try to flash original recovery
Click to expand...
Click to collapse
Thanks for answer but This problem come from the kernel i guess, i tried to flash cm11 and it s works great, i got green logo on screen .if somebody have any solution about that , patch or another kernel or something else to fix the problem.
I got the latest cm12.1 and i would like to keep it.
Thanks
No answer?? Anybody got the same problem.
Sad , very sad.
mrvegas06 said:
No answer?? Anybody got the same problem.
Sad , very sad.
Click to expand...
Click to collapse
Are you SURE it is not charging? The logo goes off but the phone normally keeps charging.
Which kernel are you on?
Journyman16 said:
Are you SURE it is not charging? The logo goes off but the phone normally keeps charging.
Which kernel are you on?
Click to expand...
Click to collapse
I m using original cyanogenmod kernel and i got this problem since cm12.i never tweak or use any other kernel.
Working fine on cm11(4.4.4).i tried to speak with an cyanogen dev but no success.
Thank for the answer.
mrvegas06 said:
I m using original cyanogenmod kernel and i got this problem since cm12.i never tweak or use any other kernel.
Working fine on cm11(4.4.4).i tried to speak with an cyanogen dev but no success.
Thank for the answer.
Click to expand...
Click to collapse
I just tried it on mine with battery at 96%. Turn phone off, connect power and I get a battery logo for about 4 secs then nothing. I waited 15 minutes and on start up my battery was at 100% - so it doesn't LOOK like anything is happening but it definitely charged while off.

screen horizontal lines that appeared

Hello guys
i had this issue with my screen recently on top of the screen horizontal lines appeared but the weird think that they disappear when i play a video or watch youtube in full screen
this pic shows that there are lines on the top side of the screen this is the link prnt.sc/f4vec6
i did have kingroot for a while if that helps to know
and this photo shows that after playing a video in full screen the lines disappear which honestly made me confuse
prnt.sc/f4vgcg
i am sorry the system wont let me attach the pics so i had to do this
please please help what should i do
i showed my phone to a repair guy and he said that the display is damaged but if it was damaged why would those lines disappear while playing a video ?
If it's a software issue, then a factory reset or a completely new ROM may fix it.
Pwnycorn said:
If it's a software issue, then a factory reset or a completely new ROM may fix it.
Click to expand...
Click to collapse
i did a factory rest and didn't fix the issue
i will try to install a ROM and see what will happen
is there any ROM you would recommend ?
Joseph4343 said:
i did a factory rest and didn't fix the issue
i will try to install a ROM and see what will happen
is there any ROM you would recommend ?
Click to expand...
Click to collapse
You can flash the stock ROM again or any other custom ROM. This is just to test if it's a software issue or not.
You did not mention your phone model, so no, I cannot suggest a ROM.
Pwnycorn said:
You can flash the stock ROM again or any other custom ROM. This is just to test if it's a software issue or not.
You did not mention your phone model, so no, I cannot suggest a ROM.
Click to expand...
Click to collapse
My phone model is gt19500
i did install a custom rom and the issue is still there :crying:
i installed First Flight V6 btw
Joseph4343 said:
My phone model is gt19500
i did install a custom rom and the issue is still there :crying:
i installed First Flight V6 btw
Click to expand...
Click to collapse
Then it's definitely your screen.

Categories

Resources