Related
Hi im using android from my sd card and i woud like to try nand as i never use winmo
so my question is, is my radio 2.12 compatible with magdlr and android from nand?
and i have HARDSPL 2
anyone? i need to know before i try something stupid and brick my phone
go ahead enjoy. any radio above 2.08 is ok..since you already have hspl, flash magldr 1.12 and then android, enjoy you have hspl, now its brick proof...go on
pakure said:
go ahead enjoy. any radio above 2.08 is ok..since you already have hspl, flash magldr 1.12 and then android, enjoy you have hspl, now its brick proof...go on
Click to expand...
Click to collapse
Nearly right - any radio above 2.08, but must be a .50 version, NOT a .51. Just be sure about that
my leo is a 512mb t8585 so im fine right?
Yes mate. You'll need to get HSPL installed in order to use magldr though. You can get that here...
http://forum.xda-developers.com/showthread.php?t=611433
See post 2 for HSPL3 (2.08)
i already have it HSPL2
radio version 2.12.50.02_2
and one more question in my contry somtimes the power goes of and if it does while installing android on nand any chance of brick?
metko said:
and one more question in my contry somtimes the power goes of and if it does while installing android on nand any chance of brick?
Click to expand...
Click to collapse
unlikely. most flashing errors that result in serious problems happen when the fail occurs whilst the spl or the radio portion are being flashed.
neither of these parts are flashed when flashing a nand rom, cos they're already set.
If a bad nand flash occurs, just go into bootloader/magldr and you should be able to flash again.
Changing radio, and flashing stock wm roms are the ones you wanna be carefull of. If your power is shakey, don't flash these too often.
ok thnx will try most likely mdj's cynanogen mod 7 today
BIG THNX to everyone i can not click thnx that many times
instaled MAGLDR1.12 then md'j cynanogen mod 7 2.3 gingerbread, i did al of this for about 10 min soo fast ,again thnx to everyone
so i have a tmobile HTC HD2.
so i have read a lot and i think i am ready to flash to the NAND thing if i am right. so here is what i have.
i am running WM 6.5 and hate it. but that is why i am doing this
my radio is 2.15.50.14
my SPL is 2.10.0000 8G XE
from what i have read i need to do the following files in this order
run HSPL4
then
MAGLDR 1.13
then i have
Rom_Desire_HD_1.84.832.2_v1.1.1_RAF1.9
and after all of the i will be runnig droid i think?
so on another question. will this flash my SD card as well? can i just take it out and run it and then keep those files. or should i back up the data then format it?
once all done i just set it up to outlook and i am back up and running
is the ROM i have chosenthe best for battery and stability oristhere another?
thanks just dont want to brick my phone. but i think i am ready.
Jar
jarporte said:
so i have a tmobile HTC HD2.
so i have read a lot and i think i am ready to flash to the NAND thing if i am right. so here is what i have.
i am running WM 6.5 and hate it. but that is why i am doing this
my radio is 2.15.50.14
my SPL is 2.10.0000 8G XE
from what i have read i need to do the following files in this order
run HSPL4
then
MAGLDR 1.13
then i have
Rom_Desire_HD_1.84.832.2_v1.1.1_RAF1.9
and after all of the i will be runnig droid i think?
so on another question. will this flash my SD card as well? can i just take it out and run it and then keep those files. or should i back up the data then format it?
once all done i just set it up to outlook and i am back up and running
is the ROM i have chosenthe best for battery and stability oristhere another?
thanks just dont want to brick my phone. but i think i am ready.
Jar
Click to expand...
Click to collapse
you need to downgrade your spl from 2.10 to 2.08 hspl in HSPL 4, keep 2.15.50.14 radio, do a task 29, backup your sd card, install MGLDR 1.13, then Clockwork mod, in clockwork mod, format sd card to 1024mb with a 0 swap, then flash rom thru CWM. there's a lot of good roms you just have to try them and choose what suits you best.
how do i downgrade to 2.08?
sorry i still don't get all the lingo on this
jarporte said:
how do i downgrade to 2.08?
sorry i still don't get all the lingo on this
Click to expand...
Click to collapse
your phone came with 2.10 spl, with HSPL 4 you should be able to select from the drop down menu the 2.08 hspl, you need hard spl to get any of this to work.
check this http://forum.xda-developers.com/showpost.php?p=11499585&postcount=3 and you'll understand!
Hi guys, i am new to the HD2 phone flash! i'm used to the Rhodium, but resently bought this HD2, and now i'm flashing the the phone to a NAND flash of android and i'm, folowing the "how to flash" guide but everytime i try to flash the magldr113 the setup said, setup complete phone will now reboot into magldr113 menu, but it doesnt.
the phone has a HardSPL flash and i ran task29 did i do annything wrong?
lord-whiskey said:
Hi guys, i am new to the HD2 phone flash! i'm used to the Rhodium, but resently bought this HD2, and now i'm flashing the the phone to a NAND flash of android and i'm, folowing the "how to flash" guide but everytime i try to flash the magldr113 the setup said, setup complete phone will now reboot into magldr113 menu, but it doesnt.
the phone has a HardSPL flash and i ran task29 did i do annything wrong?
Click to expand...
Click to collapse
You need flash MAGLDR, then flash CWM Recovery with right size, after that flash which Rom you like.
Search in Box, many topic guide you do that or go to Thread of Rom you want also have guide
Sent from my HTC HD2 using XDA App
there's a problem i cant get the phone into MAGLDR i flashed it a zillion times
Which HSPL do you have?
You have to have HSPL3 installed, not HSPL4, that one does not work with MAGLDR.
And please post your questions in the Q&A Forum not in the development forum.
Cheech1976 said:
Which HSPL do you have?
You have to have HSPL3 installed, not HSPL4, that one does not work with MAGLDR.
And please post your questions in the Q&A Forum not in the development forum.
Click to expand...
Click to collapse
Sorry sir, but you are wrong. HSPL4 will work untill and unless you select "2.08.HSPL" during installation, there is as such nothing called "HSPL4". The latest spl is 3.03 for use with 3.14 roms.
Just grab any HSPL binary and select "2.08.HSPL" to install and you should be fine, the recommended radio is "2.15.50.4" atleast that's what i use.
Rick_1995 said:
Sorry sir, but you are wrong. HSPL4 will work untill and unless you select "2.08.HSPL" during installation, there is as such nothing called "HSPL4". The latest spl is 3.03 for use with 3.14 roms.
Just grab any HSPL binary and select "2.08.HSPL" to install and you should be fine, the recommended radio is "2.15.50.4" atleast that's what i use.
Click to expand...
Click to collapse
Yes you are right
What i meant with HSPL3 and HSPL4 as a matter of fact were the file names themselves (http://forum.xda-developers.com/showthread.php?t=611433).
i've got HSPL 2.08 but the flash setup sais 100% complete your phone will reboot but it only reboot to its splashscreen
lord-whiskey said:
i've got HSPL 2.08 but the flash setup sais 100% complete your phone will reboot but it only reboot to its splashscreen
Click to expand...
Click to collapse
I´d try going way back to WinMo stock Rom and starting fresh with hspl2.08, task29, radio 2.15... (or 2.12 you´d have to try which one works better and uses less power), maybe a first splash screen, magldr113, cwm 4.0.1.4....
Rick_1995 said:
Sorry sir, but you are wrong. HSPL4 will work untill and unless you select "2.08.HSPL" during installation, there is as such nothing called "HSPL4". The latest spl is 3.03 for use with 3.14 roms.
Just grab any HSPL binary and select "2.08.HSPL" to install and you should be fine, the recommended radio is "2.15.50.4" atleast that's what i use.
Click to expand...
Click to collapse
Sorry could you explain a bit more? I flashed HSPL 2.08 via HSPL4 package and also flashed a custom WinMo ROM, so I'll be fine to flash MAGLDR right? Your post has slightly confused me, so any explanation would help.
Nigeldg said:
Sorry could you explain a bit more? I flashed HSPL 2.08 via HSPL4 package and also flashed a custom WinMo ROM, so I'll be fine to flash MAGLDR right? Your post has slightly confused me, so any explanation would help.
Click to expand...
Click to collapse
At First you need hspl 2.08 installed and than you need a radio rom which supports the 576mb ram this are the radio roms above 2.07 .The radio roms you can find in this thread http://forum.xda-developers.com/showthread.php?t=611787
and than flash magldr if it stucks at the splash screen it means that you have no 576mb ram radio rom installed after you succesfull installation of magldr install the cwm there are a lot of threads where an how to is download the tool from ksubedi it is easier for newbies.
EDIT: ksubedis toolkit you can find here http://forum.xda-developers.com/showthread.php?t=1090783
I tried installing NAND Android ROM several times with no success. Every time I got stuck at the boot screen after installing Android. And each and everytime I used the HD2 Toolkit to Wipe and install MAGLDR once again, and tried installing Android with other ROMs and other Radios.
Now in the end, MAGLDR won't boot at all after installing it, and I'm stuck at the HTC logo without anything installed.
EDIT: I forgot to mention that this happened after I installed HSPL 3.03.
HSPL 3.03 is not compatible with MAGLDR (basically, it is not compatible with Any Android Bootloader, it is only for winmo roms)
Downgrade to HSPL 2.08 and flash MAGLDR again, you should be alright.
Saying "downgrade to hspl3" and "Hspl4 aka 3.03" is not only incorrect but it's confusing too, and almost certainly will make people think they need to flash a stock rom to downgrade 3.03 to 2.x so that hspl3 will work,,,, which is not necessary.
@OP He was correct that 3.03 is the problem,, magldr will only start when spl is 2.08.hspl.
You should run Hspl4 and choose 2.08.hspl in the dropdown. No hspl3 or downgrading necessary.
samsamuel said:
Saying "downgrade to hspl3" and "Hspl4 aka 3.03" is not only incorrect but it's confusing too, and almost certainly will make people think they need to flash a stock rom to downgrade 3.03 to 2.x so that hspl3 will work,,,, which is not necessary.
@OP He was correct that 3.03 is the problem,, magldr will only start when spl is 2.08.hspl.
You should run Hspl4 and choose 2.08.hspl in the dropdown. No hspl3 or downgrading necessary.
Click to expand...
Click to collapse
Yeah, I read through loads about HSPL before flashing NAND and this really confuzzled me :S
samsamuel said:
Saying "downgrade to hspl3" and "Hspl4 aka 3.03" is not only incorrect but it's confusing too, and almost certainly will make people think they need to flash a stock rom to downgrade 3.03 to 2.x so that hspl3 will work,,,, which is not necessary.
@OP He was correct that 3.03 is the problem,, magldr will only start when spl is 2.08.hspl.
You should run Hspl4 and choose 2.08.hspl in the dropdown. No hspl3 or downgrading necessary.
Click to expand...
Click to collapse
Thank you for pointing that out, and correcting me
I edited my post in case of further references .
Marvlesz said:
Thank you for pointing that out, and correcting me
I edited my post in case of further references .
Click to expand...
Click to collapse
no worries, , however to be picky about it, (sorry, not having a go, just keeping things accurate )
Marvlesz said:
HSPL4 is not compatible with MAGLDR
Click to expand...
Click to collapse
is still wrong, because hspl4.exe is just a loader, and inside hspl4 is contained images of
2.08.0000
2.08.hspl
3.03.0000 and
3.03.hspl
So, you can use hspl4 to apply 2.08.hspl and android will run fine. Once teh spl is loaded, the phone has no clue whether you used hspl2, 3 or 4 to apply 2.08.hspl, so saying 'hspl4 isnt compatible' makes no sense.
samsamuel said:
no worries, , however to be picky about it, (sorry, not having a go, just keeping things accurate )
is still wrong, because hspl4.exe is just a loader, and inside hspl4 is contained images of
2.08.0000
2.08.hspl
3.03.0000 and
3.03.hspl
So, you can use hspl4 to apply 2.08.hspl and android will run fine. Once teh spl is loaded, the phone has no clue whether you used hspl2, 3 or 4 to apply 2.08.hspl, so saying 'hspl4 isnt compatible' makes no sense.
Click to expand...
Click to collapse
HaHa .. looks like I'm still confused
Anyway, edited again
Marvlesz said:
HSPL 3.03 is not compatible with MAGLDR (basically, it is not compatible with Any Android Bootloader, it is only for winmo roms)
Downgrade to HSPL 2.08 and flash MAGLDR again, you should be alright.
Click to expand...
Click to collapse
perfect. hehe (except that you dont need to flash magldr again, , , set teh correct hspl and reboot, magldr will start.)
you could also just download hd2 toolkit. it has everything you need to install android and wp7. just another option to explore
Hello, I am stuck at my boot screen after installing HSPL, then MAGLDR, then Leo Radio and last ClockWorkRecovery for HD2.
Is my phone still savable as long as I can boot into my boot menu?
Not even sure what went wrong, did everything right but it didn't boot already after the: "We hacked it" or something.
So what i understand is that you installed HSPL 2.08, then MAGLDR 1.13, then you installed a Radio, what HD2 do you have and what radio did you get?
KShion619 said:
So what i understand is that you installed HSPL 2.08, then MAGLDR 1.13, then you installed a Radio, what HD2 do you have and what radio did you get?
Click to expand...
Click to collapse
My radio is: "R 2.07.51.22_2".
The SPL was 1.42.0000, now it's SPL-2.08.
Unscrewed said:
My radio is: "R 2.07.51.22_2".
The SPL was 1.42.0000, now it's SPL-2.08.
Click to expand...
Click to collapse
Try installing 2.15.50.14 radio.
ahmadfini said:
Try installing 2.15.50.14 radio.
Click to expand...
Click to collapse
So only the radio or re-do all the steps?
Unscrewed said:
So only the radio or re-do all the steps?
Click to expand...
Click to collapse
Do a Task29, reinstall hspl, install radio then magldr.
So yeah redo the steps but in this order
It works like a charm now!
Thank you so much!
One last question, though (if I'm allowed to ask?).
If I download this SD Rom, and put it on my SD Card:
http://forum.xda-developers.com/showthread.php?t=1681906#2
And then go into CWRecovery -> Install .zip from SD Card -> Choose .zip from SD Card -> cm9_update_20120822.zip -> Yes - Install
This will happen:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
Click to expand...
Click to collapse
EDIT: Same happens for: http://forum.xda-developers.com/showthread.php?t=1792680
To run a SD Rom you extract it onto the root of ur SD Card (take it out of the folder) then in magldr just choose to boot from SD card.
Please click on the thanks button if i helped
Thanks so much!
I thanked you in two posts!
Also, if I install a NAND Package using CWRecovery, it tells me it succesfully installed the package, but it still boots to MAGLDR when I boot up the phone...
...is there a way to fix that too?
Thank you
If you want it to automatically boot then go to options in magldr and select boot AD NAND, if not you can just select boot AD NAND in the magldr window.
It tells me there are no boot sources while it said:
"Installed succesfully"
"Please reboot"
EDIT: Also, when I wipe my cache or anything it tells me it can't find /misc/ or anything...
please, I am so confused..
And when I boot from SD (with SD Rom) it gets stuck at the very first loading screen and reboots...
Is something wrong with my phone?
(Also, I didn't redo all the steps, I just flashed the radio and it seems to work, do I need to redo every step still for it to work right?)
Did you partition your system and sd card?
If not look n the thread of where you found the rom and see what syste partion it needs.
Wait, could you maybe please add me on Skype?
nathan_frissen
I am really confused now. ;(
Ive added you, you still havent accepted
I had this issue once before, I realized it was because I didn't re-partition as I was meant to. Try downloading the HD2 Toolkit and double checking in the thread you downloaded the NAND from about the partition sizes and use the Toolkit to partition it.
Hope I helped mate
same problem
Unscrewed said:
Hello, I am stuck at my boot screen after installing HSPL, then MAGLDR, then Leo Radio and last ClockWorkRecovery for HD2.
Is my phone still savable as long as I can boot into my boot menu?
Not even sure what went wrong, did everything right but it didn't boot already after the: "We hacked it" or something.
Click to expand...
Click to collapse
same problem