Database Users

Plz help me..! all Rom update failed at 2%

dear all experts ...
I tried to update my Shadow by the new wm6.1 rom.. the first time it went to 100% and restart with an error 270 : the image is corrupt . After, when I boot loader, it go to 2% and restart every time ( many) :
I'm stucked at bootloader mode and tried many roms but no one sucsess ... all of them reach 2% and then stopped.
even I tried the original one (Shadow_Software_Update_1.11.531.5.exe) from t-mobile official site but also same result.
so can any one help me and give me any solution to try?

try to install this on your phone
http://forum.xda-developers.com/showthread.php?t=394478
after that try installing a cooked ROM

Dear sir;
thanks a lot for attention to my problem and ur kind reply.
I already tried to do this but...
* How can I upload sspl/uspl to my phone from bootloader because it's the only mode I can work my phone?
* when I tried to do USPL + RUU it go to 100% and then the phone restart and the RUU program says corrupted image...
then the phone stays in it's state (only can go to bootloader mode).
can I use MTTY program to flash sspl/uspl and USPL and then the new rom? if yes .. how I can do it?
Or what may I do my friend..
thnx a lot again

if you can only get to the bootloader then try flashing to the t mobile rom, then start over

Mee toooooo
I installed this ROM and it doesn't work!!
the screen is freeze with the Windows 6.5 Logo, and thats it!!!!
what can i do for do a hard reset?????? (i already do that thing, power it on, and then push the 2 soft buttons, and didn't work!),
HEEEEEEEEEEEEEELP!!!!

isfected said:
I installed this ROM and it doesn't work!!
the screen is freeze with the Windows 6.5 Logo, and thats it!!!!
what can i do for do a hard reset?????? (i already do that thing, power it on, and then push the 2 soft buttons, and didn't work!),
HEEEEEEEEEEEEEELP!!!!
Click to expand...
Click to collapse
Power off the phone
Press and hold the camera and voice keys
Insert the USB cable, Keep holding the camera and voice keys until you get the bootloader screen
Then flash an original ROM.

[Q] fail to restore my xperia X8!! help

Hello,
as explained in the instructions I root my E15i xperia x8 in 2.1 then I installed xrecovery. the system boot well on Xrecovery. I even created a backup.
The problem is that after trying to flash a custom ROM>> error while formatting the boot .... apparently the rom was not ok. After rebooting the phone boot loop on the Sony Ericsson logo.
I tried to go on xrecovery = faillure, and the only way to stop this is to disconnect the battery.
can you please help me to RESET my phone.
thank you,

Use SEUS - > http://www.sonyericsson.com/cws/sup...s/detailed/updateservice/xperiax8?cc=gb&lc=en

Thanks very much. it works great.
i tried another rom and now it's ok.
good night

thank you so much

Hello, i have same problem as "achrafus". My phone after instaling MiniCM7-2.2.0-shakira is stucked at Sony Ericsson loading logo. It appears white, but after 2 sec it goes gray(maybe contrast). I cant go to xrecorvery, cant turn off the phone. I just can turn it on and then disconnect battery. Is there any way how to solve that problem ? ( Sorry for my english.)
Thank you so much.

venculda said:
Hello, i have same problem as "achrafus". My phone after instaling MiniCM7-2.2.0-shakira is stucked at Sony Ericsson loading logo. It appears white, but after 2 sec it goes gray(maybe contrast). I cant go to xrecorvery, cant turn off the phone. I just can turn it on and then disconnect battery. Is there any way how to solve that problem ? ( Sorry for my english.)
Thank you so much.
Click to expand...
Click to collapse
It's a soft brick. Use PCC/SEUS to recover whenever you have a soft brick.

Its a soft brick because he doesnt kno how to read , minicm7 requires nAa kernel -.-
Sent from my X8 running nAa and D_d piece of art called MiniCM9.

[q] help::arc boot loop and force close.

my new arc dosn't start up and loop.that means it starts until sonyericsson logo on screen and shutting of again and again.
And if it looks like it starts up than com.android.phone must be force closed.anybody knows how to repair the system.I tried seus but no results.
thanks in advance

i have the same problem ...
u used the global root and u had 2 bad blocks right
help me tooo

Hard Reset Your Xperia Arc
- back + menu (as left and right) then power
- Home + Volume Down then power
OR...
Unlock Bootloader and Flash New Rom
- Unlock BootLoader
- Use x10flashtool.exe > Flash Original Firmware
- if u forget to tick usb debugging mode Click "fastboot.exe"
Before Flash Fimware to skip that require

can u explain little more detials ... becuz im new ^_^
can u help me more heheh
i use lt15i
i want the link for the original fimware
i miss my arc

hard reset doesnt work.i will try Unlock Bootloader and Flash New Rom.i hope it works

flash the firmware and u will fix it
thx to ppl not for me ^_^

magicli said:
hard reset doesnt work.i will try Unlock Bootloader and Flash New Rom.i hope it works
Click to expand...
Click to collapse
FYI,
you don't need to unlock bootloader to flash stock rom.

i try flash stock FW but i get this error
"22/035/2011 23:35:18 - INFO - Then go to application settings
22/035/2011 23:35:18 - INFO - turn on Unknown Sources and Debugging"
I cant enter the application settings because phone doesnt turn on.please help me what can i do.

Focus 1.3 Stuck at Samsung Logo - Looks like endless reboot loop

My 1.3 focus is stuck in the Samsung logo screen. It lloks like it is in an endless reboot as the logo will go away for a moment then reappear.
I am able to get the phone into Download and Format mode with out issue.
I have also been able to succesfully reflash the original firmware without issue, but the same result none the less.
Any ideas on this?
I had put the mi7 ROM on which worked fine. This morning phone was stuck on the logo. I reflashed the mi7 without issue as well before trying the original Samsung ROM

Hi Guys
i have this same problem with my focus its also ver 1.3
i had an error on the mango update (usb cable bad apparently) according to the code, and after the failed update the phone was acting stupid and cutting out when it wants so i flashed the phone with the rogers rom, and it worked fine attempted to do the mango update again in a diff usb port and got the same error so i went to reflash the phone again so i could get my mate to try his cable the flash seemed to go through with no issues until the first reboot, then instead of getting the connect to computer screen i just got the samsung logo flashing up then restarting and flashing the samsung logo again i have tryed to flash again with diff versions of the tool and original rom and rogers rom many times but still get the same thing the only strange thing is that i cant get into the hard reset mode i can get into download mode fine but not format it just flashes back to the same flashing samsung screen Please Help or is the phone Buggered at a wild guess iv got a problem with the internal memory ??? Lost and need help

same here, please help

amitbhavi said:
same here, please help
Click to expand...
Click to collapse
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?

EnderPsp said:
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?
Click to expand...
Click to collapse
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop

reycarp said:
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop
Click to expand...
Click to collapse
I see. You're the 4th person I encounter having this problem after flashing magldr. You should ask in the magldr thread. I'm not sure if it's really magldr related but I don't see anything else that could cause it...
Make sure you specify there your revision(3/4)/ as well as OS version.

my phone break ..

i installed this rom http://forum.xda-developers.com/showthread.php?t=1362585
but im new to this so i must did something wrong
and now it dosent stuck on Sonny Ericson ..
its stucks on XPERIA Logo idk what is this ..
XPERIA in shiny letters
whice stuck after 5m
i need help i ddunno what to do
i tried SEUS and its not working any more its stuck on
Phone Connection something ..
im afraid my phone is not able to be fix ..
can u help me ?

You already flashed the nAa kernel or any other custom kernel? MiniCM doesn't work on stock kernel.

x8Break said:
i installed this rom http://forum.xda-developers.com/showthread.php?t=1362585
but im new to this so i must did something wrong
and now it dosent stuck on Sonny Ericson ..
its stucks on XPERIA Logo idk what is this ..
XPERIA in shiny letters
whice stuck after 5m
i need help i ddunno what to do
i tried SEUS and its not working any more its stuck on
Phone Connection something ..
im afraid my phone is not able to be fix ..
can u help me ?
Click to expand...
Click to collapse
Firstly , Your's is a soft brick. Easily recoverable. Use PCC/SEUS.
Open PCC
Under "Support Zone" , click "start"
Start " phone software update"
Click "Repair Phone"
Follow the subsequent steps... Your phone is recovered.
Secondly , Only flash ROMS which are meant for stock kernel (I presume you have not unlocked bootloader)
Do NOT flash a ROM if it does not support stock kernel.
Thirdly , this is a "General" section. Not a "Q&A" section. Be careful next time

Obiviously he is on stock when he mentions stuck on xperia logo....