Related
Just bought yesterday my galaxy tab!
but I have a trouble... I connect the headphones that came with the galaxy and nothing happens. I want to hear some music, to use it during a call and it uses the speakers all the time. Is there an option for it? What may be wrong? My father also has one galaxy tab and the problem is the same, nothing happens!
snedcor said:
Just bought yesterday my galaxy tab!
but I have a trouble... I connect the headphones that came with the galaxy and nothing happens. I want to hear some music, to use it during a call and it uses the speakers all the time. Is there an option for it? What may be wrong? My father also has one galaxy tab and the problem is the same, nothing happens!
Click to expand...
Click to collapse
The headset jack is very stiff (maybe because of the microphone + earplugs + switch combo), you must ensure it's pushed all the way into the hole (wiggle it gently and it will finally get there). I had the same problem, it only takes a couple of tries and then it's all fine afterwards.
I'm not sure if this has been answered (a brief search didn't turn anything up), but it's bugging me so I figured I'd ask.
I have a Galaxy S phone and when I plug it in to my stereo using a 3.5mm -> dual RCA it works great. When I do the same with my Galaxy Tab, I get a buzzing and no audio whatsoever, regardless of whether or not I push the plug all the way in, etc... My stereo headphones work great on both, so I'm puzzled as hell, but do know that the headphones which shipped with my phone will not work with my tab.
Weird. If someone could help me fix that, they'd be very cool in my books (I want the bigger display so I can glance at the radio app and see what's playing when I hear a good song).
Aaaaand to follow up: I'm dumb. My case was preventing the cable from plugging in all the way (by about 1/16"). So if anyone else has that problem, there's the solution!
I have been searching for this problem, but can't find anything about it.
Theres a problem with my Galaxy Note headphones. Every time i plug them in the Note, the audio is really bad, kinda like it only sends half of the music out, and I can normally only hear the music, and then the voice in the song is really really low.
But when I press the button on the headphones it works completely like it should, but I have to keep pressing the button. So if i stop pressing it, the audio gets really bad again.
Does it have anything to do, that I jailbreaked the phone with the Abyssnote kernel?
Did they worked properly before you flashed the kernel?
Maybe the headphones are just broken?
That's what I can't remember
Is there a way to reinstall the stock kernel?
Sorry for being a newbie..
Have you tried other headphones to see if its the Note or the headphones?
Your headphones are broken.
Sent from my GT-N7000 using Tapatalk
This has happened to me several times now. Pushing the jack harder and/or rotating it helps in my case.
Probably broken plug. Unfortunately many samsung's heaphones arrive broken...
Sounds like the pin alignment is in the wrong. What brand headphones and what were the made for? Try other headphones. I have a set of Nokia headphones that don't work on an iPhone or the note but work great on my Booklet netbook. Just saying, headphones with mics are not universal.
I own 20 nokia headphones. All had this issue.
normally i only get this issue when i havent pushed the plug all the way into the socket.
Same Issue w/AT&T Version
I purchased two G Note's back in March, and I am just now finding out four days ago that both devices will not allow the Headphone jack to completely be inserted into the port at the top of the phone. When inserted, although not properly seated all the way inside the device, you can hear sound in one side, and if you apply pressure downward you can hear both sides. I told AT&T I don't care that you have not heard of this problem, and what are you going to do about it. After taking my devices to two AT&T Retail Stores and a Best Buy, which is an Authorized Retailer, they all told me I may have defective devices. After being on the phone with AT&T CS Rep, 73 minutes the Rep comes back and says her Supervisor said it's not a warranty issues and not to replace me devices. I said let me talk to the buffon. Guess what, he/she never came to the phone to talk with me, so the CS Rep said she was going to put the Warranty Replacements through anyway. I have tried Samsung, Sony, and Philips Headphones, all of which are 3.5mm and a male-to-male audio jack to listen to my music in my car and this is when I discovered the problem. When at AT&T and Best Buy my Headphones fit into their display models without any problems, and so with their own Headphones. But when AT&T and Best Buy tried THEIR Headphones they would not fit into my phones. So at the moment, I am waiting on my replacement devices and hopefully those will be ok.
So I don't believe it has anything to do with your jailbroken phone or a kernel issue.
Do the headphones work?
I suggest you try to use the headphones with someother device. MP3player, desktop, TV.
See if they work OK with those.
I also suggest you try a different set of headphones with the Note and see if those work.
AW: Problem with the Note and it's headphones
Delete
I'm going to go way outside the normal thought process. Do you ever carry your phone in your jeans pocket? I've actually experienced a couple times where the lint in my pockets got into the headphone jack hole and it would do what has been described in previous posts about the jack not seating properly. Forcing the jack in, only compacted things further. I ended up spending a while with a needle and bent paperclip to get the stuff out. Get a good light and look inside. Maybe even compare what you see to another devise with a headphone jack. Good luck.
Sent from my GT-N7000 using xda app-developers app
unglued94ta said:
I'm going to go way outside the normal thought process. Do you ever carry your phone in your jeans pocket? I've actually experienced a couple times where the lint in my pockets got into the headphone jack hole and it would do what has been described in previous posts about the jack not seating properly. Forcing the jack in, only compacted things further. I ended up spending a while with a needle and bent paperclip to get the stuff out. Get a good light and look inside. Maybe even compare what you see to another devise with a headphone jack. Good luck.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
This is true. I got one of those cheep screen pens with a rubber tip as it has a plastic thing to hold it in the Jack hole by athread. I use the plastic bit to plug the hole to stop lint & moisture
From box 13......
Never happened to me and i am still loving the out of the box headphones. Maybe urs broken..
Sent from my GT-N7000 using xda app-developers app
had the same problem here:
It started with the same symptoms as you described, then (as a guy mentioned) I could make it working by turning the jack a little around when plugged in.
then Iost the left channel, then it stopped working.
went to the service: they replaced the whole input part (the internal audio in/out hardware) which sits right behind the 3,5 mm "headphone out".
Then it worked. However, I was curious to find out what had caused the malfunction. So I gave it to a Chinese friend (he has a repair shop for phones).
He found out that by plugging in "non compatible" head sets (probably my old Nokia one), which do have different sections at that pin for the remote control, I caused a short circuit to the audio hardware. We could simulate this on his computer, where he has a simulation software to control the current flow caused by head sets. So, If it is not your ROM (you said you are not on Stock) , you will have to replace your audio in/out at your service center.
hope this helps
greetings from Sichuan China
I used some really old iPhone headphones on my Note 3 the first day I had it, last week. I haven't had an iPhone since 2010, so I am talking super old and beaten to death. They worked fine.
I only mention this because I've read that some older headsets are not compatible with the S4 and Note 3.
Then I paired them with a pair of ARCTIC P253BT Bluetooth Stereo Headphones. The pairing worked, in theory. The phone and headphones seemed to think they were connected.
But all I got for audio was beeps from the headphones when it connected and the phone would play at the normal, holding-to-ear volume -- even when I clicked the button for headphones and jacked up the volume in Bluetooth Settings. This did not shock me because they are cheap headphones.
Later, I tried to use the Aux jack in my car -- no dice. Phone just acted like it didn't have headphones in.
Tried the old iPhone headphones again, phone acted like it did not have headphones in. I figured I at least had those.
Restarted -- same issue.
I realize this is a very low-level question for this forum. I have yet to ROM the phone and will probably wait until TouchWiz finally beats me down.
Part of the problem is that I had been rolling with a Nexus 4 on CM 10.2, I've been running CM for a year over multiple devices and I've never had a Samsung device.
So I just feel like I don't know how to solve anything. I realize asking for TouchWiz advice is like Yankees ownership asking Red Sox fans for advice, but I am taking a shot.
Any thoughts?
Sounds like you have a bad headphone jack or something wrong with the port connector in the motherboard. I would submit a warranty claim and get a new one.
Btw I've used Bluetooth headphones and the aux port in my car it works perfect.
sent from my ROOT powerd Note3
metalsnakebite said:
Sounds like you have a bad headphone jack or something wrong with the port connector in the motherboard. I would submit a warranty claim and get a new one.
Btw I've used Bluetooth headphones and the aux port in my car it works perfect.
sent from my ROOT powerd Note3
Click to expand...
Click to collapse
Wow, seriously? I did not expect it to be that extreme. Whatever went wrong happened some time after I initially used the first set of ear buds.
So maybe I did it? I have been treating the thing like gold, though.
You say that it does nothing when you plug in a headphone right? Like there is nothing connected?
sent from my ROOT powerd Note3
Similar issue solved after powering phone off/on
metalsnakebite said:
You say that it does nothing when you plug in a headphone right? Like there is nothing connected?
sent from my ROOT powerd Note3
Click to expand...
Click to collapse
I've been having the same issue and it seems to correct itself if power my phone off/on, but I'm not happy about the headphone jack being so unreliable on a brand new phone. I've plugged in headphones and an aux out headphone cord and experienced this problem. When the issue arises, the phone will pause for a second as if it's going to send audio to the headphones or aux out device, the unit states "headphones connected" in the notification tray, and then within a second of doing so the audio continues to come from the Note 3 speakers instead of the headphones or external speakers.
metalsnakebite said:
You say that it does nothing when you plug in a headphone right? Like there is nothing connected?
sent from my ROOT powerd Note3
Click to expand...
Click to collapse
It works for one second then either gets really dim or starts playing at the normal call volume (not speaker volume). I took it to the store today and They had no idea. They thought they were very clever when they first got it and I told them all the setting they were planning to try had already been confirmed. They went through the motions. No dice.
They think it is a hardware issue.
If it is a hardware and that is what it sounds like then, you can submit a manufacturer warranty claim with Verizon Wireless.
sent from my ROOT powerd Note3
metalsnakebite said:
If it is a hardware and that is what it sounds like then, you can submit a manufacturer warranty claim with Verizon Wireless.
sent from my ROOT powerd Note3
Click to expand...
Click to collapse
I did that and got a new one. Same issue. Insane. Must be something in my settings.
Solution
bmcs9119 said:
I did that and got a new one. Same issue. Insane. Must be something in my settings.
Click to expand...
Click to collapse
My solution to this behavior (YMMV, but I had the exact same behavior)
The issue ended up being the case. It was generating enough of a standoff that the AUX cable wasn't making complete connection. I think the Note is configured to only recognize a headphone output if both channels are making connection (which is slightly atypical behavior).
TL;DR: If you're having a similar problem, try taking off your case.
Car aux input does not work
GirlMeetsGym said:
I've been having the same issue and it seems to correct itself if power my phone off/on, but I'm not happy about the headphone jack being so unreliable on a brand new phone. I've plugged in headphones and an aux out headphone cord and experienced this problem. When the issue arises, the phone will pause for a second as if it's going to send audio to the headphones or aux out device, the unit states "headphones connected" in the notification tray, and then within a second of doing so the audio continues to come from the Note 3 speakers instead of the headphones or external speakers.
Click to expand...
Click to collapse
I'd like to add my voice to the chorus. Almost identical problem. Works perfectly on all other devices but not 2007 Saab aux. Worked with former Note 2. I tried 3 different cables. Plays fine for a little while then audio directed to phone speaker when notification sounds. I have no case. Pretty sure it's not cabling. Heard it was low impedance headphones. My carrier has not heard of this. I belive it's a compatibility issue with the aux port. Trying bluetooth alternative. I dislike the Hassel but at a loss for now. Maybe Kitkat?
I am having the same issue on a phone that is less than a week old. Headphones work, then later they don't. It shows them connected, briefly sends audio to earphone, then to phone speaker. Reboot fixes it.
Sent from my SM-N900T using Tapatalk
Had the same issue im sure this was tried but make sure your headphones or anything else is plugged in all the way the connection on these things is shotty at best anything you use must be all the way in or it wont work
jolly_roger_hook said:
Had the same issue im sure this was tried but make sure your headphones or anything else is plugged in all the way the connection on these things is shotty at best anything you use must be all the way in or it wont work
Click to expand...
Click to collapse
I don't think this is a hardware issue as the behaviour doesn't really make sense. I suspect it has to do with the service that detects whether headphones are connected or not.
I have this issue from time to time with multiple pairs of headphones.
A restart usually fixes it, but not straight away. I usually have to wait a minute or two after the gui is loaded before the headphones will be detected again.
Hey so on some aux cables there's that horrible static constantly unless you turn on the audio upscaling, but this doesn't work for all apps such as when I get a phone call. Why is this issue happening in the first place? I was looking through forums and I saw a Galaxy S7 owner with the same issue. Why hasn't Samsung fixed this? This is unacceptable for a software correctable issue on a high end device.
I
Yeah I am having the same problem. This is unacceptable, I'm returning my phone tomorrow.
I just picked up my phone yesterday at BestBuy (At&t NEXT program)....While playing music, it's fine, but using Google Maps through my stereo, it's horrible (hisssss and static)! But, it only happens when I'm charging my phone at the same time?
I'm picking up a bluetooth adapter, with my $100 gift card I got for getting the phone, and going to try that tomorrow evening?
To the first two, you're likely using inferior quality Aux cables which is why you're only experiencing this issue on "some" cables as you state in your OP post.
To the last poster, this is just a simple ground loop interference. Its annoying but it happens to everyone if you're charging your phone while using the Aux for audio. Your solution is the right one, just get a decent BT 4.0 or higher adapter and you're set to go. Look for one with aptX support if possible for the best quality audio.
Anything analog cable and material matters a lot and for anything digital cables dont matter.
For example for SPDIF monster cable will be equal to a Chinese cable with same specs