crash after wipe data on 4.0.4 - Galaxy Note GT-N7000 General

i tried to wipe date by android recovery system and from then my note cant boot, i cant access clockworkmod but i cant restore from a nadroid backup , its says error while mounting /system... any help???
also on the startup i got a message
applied the csc-code : XEU
Successfully applied mmulti-csc
e:failed to mount /data (Invalid argument)
e:copy_log_files_to_data :: can't mount /data

mesiah said:
i tried to wipe date by android recovery system and from then my note cant boot, i cant access clockworkmod but i cant restore from a nadroid backup , its says error while mounting /system... any help???
also on the startup i got a message
applied the csc-code : XEU
Successfully applied mmulti-csc
e:failed to mount /data (Invalid argument)
e:copy_log_files_to_data :: can't mount /data
Click to expand...
Click to collapse
mesiah, you have the correct nick....you havenĀ“t read about the Hardbrick bug, have u??...You are not supposed to wipe running an ICS kernel...read this:
http://forum.xda-developers.com/showthread.php?t=1633943
try using odin to flash back to stock GB...but if you get stuck in the NAND WRITE part...I have bad news for u.

i tried it but nothing, also i tried to install a rom that i have stored in my sd, it started but it stuck in 57% of the installation... do you have any explain ??``
i tried it again and it stuck on 80%

mesiah said:
i tried it but nothing, also i tried to install a rom that i have stored in my sd, it started but it stuck in 57% of the installation... do you have any explain ??``
i tried it again and it stuck on 80%
Click to expand...
Click to collapse
You are probably hardbricked for wiping in ICS....read the post I sent u.

when i open the device it stucks in samsung logo as i have read in this guide http://forum.xda-developers.com/showthread.php?t=1656635 this is a soft brick as i understand??? i confused ... what options i have???

mesiah said:
when i open the device it stucks in samsung logo as i have read in this guide http://forum.xda-developers.com/showthread.php?t=1656635 this is a soft brick as i understand??? i confused ... what options i have???
Click to expand...
Click to collapse
mesiah...I have already told u...flash a stock GB firmware with ODIN PC....if you get stuck there, then u are hardbricked...

glevitan said:
mesiah...I have already told u...flash a stock GB firmware with ODIN PC....if you get stuck there, then u are hardbricked...
Click to expand...
Click to collapse
can samsung fix it?

mesiah said:
can samsung fix it?
Click to expand...
Click to collapse
If it's hardbrick and you are under warranty, then you will have to use your warranty and they will either replace your phone or give you a new motherboard.

so do you know the cost?? i have one more samsung galaxy note with a dangerous kernel , what i have to do ?

read the stickies in the forum. they really describe the problem in detail.

Related

Black screen after flash and hard reset

Hi all! 1st post here
I tried to flash the new 2.2 firmware yesterday, but something went wrong...
I have now tried to hard reset it from Recovery mode (Vol Up+Home+Power).
I tried cache wipe and factory reset first, and the update.zip option as well.
No matter what I do, the phone boots, shows the "S" logo for a while, but then the screen gets black. I can't even tell if the phone is on or off...
What's the matter?! I'm at work so I can't re-flash it with Odin...
Any suggestions on this? Please don't tell me it's bricked
Have a good one!
EDIT: The phone is ON now, because the Back and Menu buttons are lit. But the screen remains black and the phone seems unresponsive.
I am having this same problem, I flashed to JP3 and it worked however when I flashed back to JM2 I have this exact same problem, it looks as the flash goes through completely however it doesnt work.
I have flashed, and reflashed, using previous firmwares, restarted my computer, reflashed again, flashed with repartition box checked, flashed with repartition box unchecked,.... all seem to produce the same results,... after flash the phone goes straight into recovery mode... is this normal>??? I am unable to run update.zip, the phone says
Cant open /sdcard/update.zip
(no such file or directory)
installation aborted
Booted into recovery mode and did a factory reset however still boots to a black screen.
Reflash the phone in download mode just produces the same results.... im lost
Update: So I restarted my computer, and went through with the flash, after the phone reboots, it automatically goes to the recovery menu with this error:
update media, please wait
E:Cant Mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:cant mount DBDATA
your storage is not prepared yet, please use UI menu for format and reboot actions.
Copy default media content failed
Now at this screen I just select reboot phone.
help please...
hi,
don't panic, it appened to me 4 or 5 times already,
i solved the problem instaling samsung recovery system ver 3 <3e> the e means europe "in my case".
for that i flashed with JP3 "froyo 2.2" and pit 513 because android 2.1 has SRS v2 and dont let us solve the repartition problem, after the SRS pops i selected the option "flash sd card" and after that selectet option reboot "or restart i dont remember" and voila.
if you have any Q? just ask i will try to help
ps: you have to wipe data e wipe partition and format memory and at the end reboot
jcam said:
hi,
don't panic, it appened to me 4 or 5 times already,
i solved the problem instaling samsung recovery system ver 3 <3e> the e means europe "in my case".
for that i flashed with JP3 "froyo 2.2" and pit 513 because android 2.1 has SRS v2 and dont let us solve the repartition problem, after the SRS pops i selected the option "flash sd card" and after that selectet option reboot "or restart i dont remember" and voila.
if you have any Q? just ask i will try to help
ps: you have to wipe data e wipe partition and format memory and at the end reboot
Click to expand...
Click to collapse
Hi I got the same problem so I flashed with pit 513 but there is no "Flash SD card" option, there is only format internal sd card option and it gives "can't mount sd card", can you give me some help?
did any of you install clockwork mod?
It seems like clockwork mod not deleting Dalvik Cache. If you didn't made that mistake like me then try UGJG8 Firmware with 512 pit.
Has anyone figured out a way to resolve this.
I am stuck with the same issue
Sorry for not replying earlier... I solved things by just re-flashing with some other firmware version...
Currently running JM5 with ~2200 score in Quadrant (with lagfix 1.8)
I have now had this happen after what seemed like a successful upgrade from the now officially released Froyo for the Bell I9000.
I am very sad but am hoping there is a way to fix this without losing my phone to Samsung for a month or more...
Any help is greatly appreciated and links to downloads are also very appreciated rather than just referring to something and not putting a link to it.
Thanks....
Never mind all...
I gave up and sent it back. I got a free loaner so not all bad...

How to unbrick SGS after failed firmware upgrade?

Hi
I recently got my phone back from repair (damaged screen). Phone came completaly wiped as you can imagine but before it was sent away it was running on OCLF 2.0 by Ryanza...After I got it back ive noticed that there were some problems like notification bar got stuck, appz were very laggy etc..
I came to the conclusion that this is because of some partition corruption or sth.
I tried to update firmware via Odin but whatever i try it always fails before installing giving me that in the recovery mode:
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_medua:Can't mount DBDATA:
I tried different Froyo version but it always downloads firmware from pc and fails just after that...(through Odin)
Recovery mode (3e) still works but i worry my partition structure may be damaged ...
Is there something else i can do to fix it??
Appreciate every help You can give me.
Try an eclair firmware and check repartition in odin. There are a bunch of threads in the q&a forum. Search for your error msg.
its very important that you use all 3 files, with repartition ticked, to get rid of these errors
I tried to repartition with both checked and unchecked....but will try to use eclair ...does using phone(modem) makes any difference?
managed to fix the problem flashing old JPC with 512 pit ...thx for help guys..appreciate it.

HELP!!! Cant start phone :((

I tried to flash a rom and after the phone rebooted it says:
E:Cant mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
Cant start phone or anything (
Reflash
That fails install stock rom via ODIN .
jje
It was some stock rom i installed from samfirmware.com using odin ..
Now no matter what i try i get the same error
BelugaHval said:
It was some stock rom i installed from samfirmware.com using odin ..
Now no matter what i try i get the same error
Click to expand...
Click to collapse
I got this error once, went away when I flashed again with re-partition (this was with the XXJPU ROM on samfirmware.com).
This happened to me, download a bunch of roms and open them look for a dbdata file inside. DON'T extract but once you find it flash that rom, it will work!
Sent from my GT-I9000 using XDA App
it happen to me too, this is how u can fix it: just find the wright CSC and use this stock ROM
http://forum.xda-developers.com/showthread.php?p=9532608#post9532608
BelugaHval said:
I tried to flash a rom and after the phone rebooted it says:
E:Cant mount /dev/block/stl10
(Invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
Cant start phone or anything (
Click to expand...
Click to collapse
Flash back to an stock Eclair 2.1 ROM like JM8 or JH2
then flash back to stock Froyo 2.2 of your choice
before you boot into the OS
go into Recovery Mode
select Format Internal SD
select wipe data
select wipe cache
select reboot
now it should work like normal
AllGamer said:
Flash back to an stock Eclair 2.1 ROM like JM8 or JH2
then flash back to stock Froyo 2.2 of your choice
before you boot into the OS
go into Recovery Mode
select Format Internal SD
select wipe data
select wipe cache
select reboot
now it should work like normal
Click to expand...
Click to collapse
To the OP, I'm +1 this reco. All other suggestions are typically variations of this but this is the most straight forward and complete.
It happen to me, I just had to find the right CSC, flash Eclair, then the custom ROM

Help cant flash my U8800 pro anymore

Hi all pls dont hate me im a big fan from this forum :laugh:
E: Format_Volume: make_extf4fs failed on /dev/block/mmcblk0p13
I get this error message when I try to do a factory reset with CWM v5.5.0.4
I was trying to install roms after error message
stock rom 2.2f 2.3g
error message failed update
roms oxygen2.2.2 cm-7.1.0-U8800-Geno-en aurora 4.1
The phone is stuck you can only see the logo of huawei without motion
rom 2:02 aurora
I see the aurora logo that moves but nothing happen
I've tried re-partitioning with Geno (official-partition.zip)
but I think that's the wrong partition there repartitioned and reformatted
I think I need someone who could help me
to get to my data partition run again
pls help me i dont want a new paperweight whit cwm :crying:
sorry for my bad englisch :silly:
SimonAndroid said:
Hi all pls dont hate me im a big fan from this forum :laugh:
E: Format_Volume: make_extf4fs failed on /dev/block/mmcblk0p13
I get this error message when I try to do a factory reset with CWM v5.5.0.4
I was trying to install roms after error message
stock rom 2.2f 2.3g
error message failed update
roms oxygen2.2.2 cm-7.1.0-U8800-Geno-en aurora 4.1
The phone is stuck you can only see the logo of huawei without motion
rom 2:02 aurora
I see the aurora logo that moves but nothing happen
I've tried re-partitioning with Geno (official-partition.zip)
but I think that's the wrong partition there repartitioned and reformatted
I think I need someone who could help me
to get to my data partition run again
pls help me i dont want a new paperweight whit cwm :crying:
sorry for my bad englisch :silly:
Click to expand...
Click to collapse
Well, you need to restore the -pro stock files. Try this link.
ty for your fast reply
Somcom3X said:
Well, you need to restore the -pro stock files. Try this link.
Click to expand...
Click to collapse
I've already tried it whit stock rom 2.2 and 2.3 from huawei page but on end i get error message failed update
before this stock roms works fine
I just think it can not be written to the correct partition
the stock rom can not do that, I realized even before this where I worked with 2 android systems I had to repeatedly use the tools of Geno
to install stock roms
(twosys-partition.zip) for install 2 systems
(offical-partition.zip) for 1 sysem like stock rom 2.3
I think there is something wrong with this partition 0p13
Maybe this would help create a new partition
how can I get access, and I do not know what format
Maybe there is a different solution
I am very grateful for any kind of help with my problem
SimonAndroid said:
I've already tried it whit stock rom 2.2 and 2.3 from huawei page but on end i get error message failed update
before this stock roms works fine
I just think it can not be written to the correct partition
the stock rom can not do that, I realized even before this where I worked with 2 android systems I had to repeatedly use the tools of Geno
to install stock roms
(twosys-partition.zip) for install 2 systems
(offical-partition.zip) for 1 sysem like stock rom 2.3
I think there is something wrong with this partition 0p13
Maybe this would help create a new partition
how can I get access, and I do not know what format
Maybe there is a different solution
I am very grateful for any kind of help with my problem
Click to expand...
Click to collapse
Hi
change your memory card and Try these instructions on this link
http://forum.xda-developers.com/showthread.php?t=1816147

[Q] Samsung galaxy Y duos bricked..

Rooted galaxy y duos ..
First i was running the STOCK ROM and KERNEL it was just rooted and supercharged (speed boost)
i wanted to install the ICS on my device (galaxy y duos ) .. so i flashed the ROM through CWM .. after the installation it had boot loops .. so i tried to restart the device by taking off the battery and putting it back in .. but now the device is stuck .. i have tried flashing stock ROMS through ODIN but it always give the message "Installation Aborted " it also cannot mount system ..Need help ? ( I am new to android and sorry for my bad English ) please HELP ?
Solution
Don't worry , its a easy fix..
I am assuming you have installed drivers for your phone on your comp..
Download the flashable Galaxy y duos stock rom - http://androidforums.com/samsung-ga...y-duos-s6102-flashable-firmware-packages.html
Download odin 3.0.7 if your don't already have it
Guide to use odin to flash files to your phone - http://mobotechie.com/android/how-to-use-odin-to-flash-the-official-rom-ultimate-guide
Connect your phone in Download mode (Volume Down Button + Home button followed by the Power Button)
Follow instructions in guide and flash the Stock ROM
Done ! :laugh:
Hit the thanks button if i helped
umm i have tried that but it gets stuck on the galaxy y logo -_- >_< ..and actually i have been tring the same from the last 3 days -_- >_<
now it is saying dat
(status 7) installation aborted.
--Appling Muti-CSC--
E:failed to mount :/system
(invalid argument)
installation aborted
what should i do ? i tried the nandroid backup but it says MD5 mismatch plz help ?
madhavkhrn31 said:
now it is saying dat
(status 7) installation aborted.
--Appling Muti-CSC--
E:failed to mount :/system
(invalid argument)
installation aborted
what should i do ? i tried the nandroid backup but it says MD5 mismatch plz help ?
Click to expand...
Click to collapse
anyone out there who can save some money of mine ? >_<
i'll hit thanks :silly:
madhavkhrn31 said:
anyone out there who can save some money of mine ? >_<
i'll hit thanks :silly:
Click to expand...
Click to collapse
Hi... Same is happening wid me... Plz help!.. Have u solved it,?? Me too getting md5 mismatch! I tried flashing technoduos rom...
naman4797 said:
Hi... Same is happening wid me... Plz help!.. Have u solved it,?? Me too getting md5 mismatch! I tried flashing technoduos rom...
Click to expand...
Click to collapse
Reflash it.
1. Turn off your phone
2. Go to stock recovery Vol up + home button + Power button
3. Wipe data/cache
4. Apply update from sd card and choose CWM
5. Wipe data/cache again
6. install zip from sd card
7 choose zip from sd card
8 and choose technoduos .. If that doesn't help .. try to reflash it and go to mounts and storage and format /data /system /cache
BE careful! Don't format sd card.
check this cwm flashable link
I have same kind of probel 10 months ago when I have this phone I think it works very well check the link
http://forum.xda-developers.com/showthread.php?t=1990997
Done
enoch.binas said:
Reflash it.
1. Turn off your phone
2. Go to stock recovery Vol up + home button + Power button
3. Wipe data/cache
4. Apply update from sd card and choose CWM
5. Wipe data/cache again
6. install zip from sd card
7 choose zip from sd card
8 and choose technoduos .. If that doesn't help .. try to reflash it and go to mounts and storage and format /data /system /cache
BE careful! Don't format sd card.
Click to expand...
Click to collapse
thanks for the help... I simply flashed stock Rom via Odin... it works fine now.

Categories

Resources