Rooted galaxy y duos ..
First i was running the STOCK ROM and KERNEL it was just rooted and supercharged (speed boost)
i wanted to install the ICS on my device (galaxy y duos ) .. so i flashed the ROM through CWM .. after the installation it had boot loops .. so i tried to restart the device by taking off the battery and putting it back in .. but now the device is stuck .. i have tried flashing stock ROMS through ODIN but it always give the message "Installation Aborted " it also cannot mount system ..Need help ? ( I am new to android and sorry for my bad English ) please HELP ?
Solution
Don't worry , its a easy fix..
I am assuming you have installed drivers for your phone on your comp..
Download the flashable Galaxy y duos stock rom - http://androidforums.com/samsung-ga...y-duos-s6102-flashable-firmware-packages.html
Download odin 3.0.7 if your don't already have it
Guide to use odin to flash files to your phone - http://mobotechie.com/android/how-to-use-odin-to-flash-the-official-rom-ultimate-guide
Connect your phone in Download mode (Volume Down Button + Home button followed by the Power Button)
Follow instructions in guide and flash the Stock ROM
Done ! :laugh:
Hit the thanks button if i helped
umm i have tried that but it gets stuck on the galaxy y logo -_- >_< ..and actually i have been tring the same from the last 3 days -_- >_<
now it is saying dat
(status 7) installation aborted.
--Appling Muti-CSC--
E:failed to mount :/system
(invalid argument)
installation aborted
what should i do ? i tried the nandroid backup but it says MD5 mismatch plz help ?
madhavkhrn31 said:
now it is saying dat
(status 7) installation aborted.
--Appling Muti-CSC--
E:failed to mount :/system
(invalid argument)
installation aborted
what should i do ? i tried the nandroid backup but it says MD5 mismatch plz help ?
Click to expand...
Click to collapse
anyone out there who can save some money of mine ? >_<
i'll hit thanks :silly:
madhavkhrn31 said:
anyone out there who can save some money of mine ? >_<
i'll hit thanks :silly:
Click to expand...
Click to collapse
Hi... Same is happening wid me... Plz help!.. Have u solved it,?? Me too getting md5 mismatch! I tried flashing technoduos rom...
naman4797 said:
Hi... Same is happening wid me... Plz help!.. Have u solved it,?? Me too getting md5 mismatch! I tried flashing technoduos rom...
Click to expand...
Click to collapse
Reflash it.
1. Turn off your phone
2. Go to stock recovery Vol up + home button + Power button
3. Wipe data/cache
4. Apply update from sd card and choose CWM
5. Wipe data/cache again
6. install zip from sd card
7 choose zip from sd card
8 and choose technoduos .. If that doesn't help .. try to reflash it and go to mounts and storage and format /data /system /cache
BE careful! Don't format sd card.
check this cwm flashable link
I have same kind of probel 10 months ago when I have this phone I think it works very well check the link
http://forum.xda-developers.com/showthread.php?t=1990997
Done
enoch.binas said:
Reflash it.
1. Turn off your phone
2. Go to stock recovery Vol up + home button + Power button
3. Wipe data/cache
4. Apply update from sd card and choose CWM
5. Wipe data/cache again
6. install zip from sd card
7 choose zip from sd card
8 and choose technoduos .. If that doesn't help .. try to reflash it and go to mounts and storage and format /data /system /cache
BE careful! Don't format sd card.
Click to expand...
Click to collapse
thanks for the help... I simply flashed stock Rom via Odin... it works fine now.
Related
I downloaded InDroid v4.3 and flashed SG3 to InDroid v4.
When i downloaded InDroid 4.3 there was no update.zip but there was InDroid v4.3 Big_Update.
So when i went into recovery mode (I put the Big_update on the 2-primary partitioned SDCard) and tried installing update.zip from the sdcard.
But it said E:cant mount sdcard
And now im stuck with a phone which keeps on looping InDroidv4!!!! whenever i boot it...
My question is... What do I do to make the update work?
2Triangle said:
I downloaded InDroid v4.3 and flashed SG3 to InDroid v4.
When i downloaded InDroid 4.3 there was no update.zip but there was InDroid v4.3 Big_Update.
So when i went into recovery mode (I put the Big_update on the 2-primary partitioned SDCard) and tried installing update.zip from the sdcard.
But it said E:cant mount sdcard
And now im stuck with a phone which keeps on looping InDroidv4!!!! whenever i boot it...
My question is... What do I do to make the update work?
Click to expand...
Click to collapse
first of all there is no CWM recovery in indroid 4.0 if u have flashed the 4.1 version then go to recovery > install from sd > choose zip file (indroid 4.3_big update)
*u r currently doing "SD card:update.zip"
for more info, please refer to the video posted on both indroid thread for update.
Actually, i had a stock rom, flashed it to 4.0... it works sometimes(now it randomly got frozen.) So how do i update it? Do i have to 'install from sd'?
EDIT: Now im on recovery..
Its Samsung recovery Utils- forBML-
i selected apply sdcard:update.zip
but it says in red:
E:Can't mount /dev/block/mmcblk0 (or NULL)
(No such file or directory)
E:can't mount SDCARD:update.zip
Installation aborted.
My SG3 has never been rooted b4 and i don't have clockwordmod recovery...
2Triangle said:
My SG3 has never been rooted b4 and i don't have clockwordmod recovery...
Click to expand...
Click to collapse
indroid is prerooted, i wud suggest u to flash 4.1 first with Odin and then update to 4.3
Ok ill try that....
How do i join the parts? Theres something call HCLSplit or somethin like that?
Got clockworkmod... disabled signature check (cause it was getting annoying)...
says installing update...
copying files...
Installation Complete!!
Reboot 26 now...
Thanks a lot brjshshrma!!
2Triangle said:
Got clockworkmod... disabled signature check (cause it was getting annoying)...
says installing update...
copying files...
Installation Complete!!
Reboot 26 now...
Thanks a lot brjshshrma!!
Click to expand...
Click to collapse
ur welcome.
feel gud for u
Hello..I had WajkIUI_multilang_1.11.18_RTL, which was working just fine then i tried a new rom,,i didn't like it so when i tried to go back to the old rom,i just can't finish the installation,when i use the RSD lite to install the original rom it works fine then i root the device,then i installed SndInitDefy then when i go to the recovery menu i can't install the rom,,i've tried manytimes , but the same thing happens:
when i try to wipe the data or cache: E: Can't open /tmp/recovery.log
so i go to the next step by choosing the installation of the rom and i get this message:
E: can"t make /tmp/update_binary
ClockworkMod Recovery v2.5.1.8
insallation aborted
Please help my..i don't know what to do now,i went to the Wajkiui rom page and red everything carefully ..but still can't change my rom, i need to insatll the Wajkiui rom
right now the rom is : shadow-128 2.3.4
that alot
Which version of 2ndinit did you use?
The best for wajkiui is 1.4.2
Or you can try to select stable recovery instead of latest recovery.
I'm using the same config(shadow_2.3.4-134_DFP-10.sbf and WajkIUI_multilang_1.12.16_ICS.zip)
i'm using the same version..i've tryied everything in the Recover to install the rom,but i still get the same error message
This is what i'm going:
Rooted the device, installed SndInitDefy_1.42.apk and activated the Sndindefy
i copied the rom into my MC.
started my phone
Entered the boot Menu
in the RECOVERY menu there are only two options: ( Custom Recovery- Stock Recovery )
in Custom Recovery- Wipe data/cache =
formatting data...
formatting cache...
formatting sdext...
No app2sd partition found. Skipping format of /sd-ext.
formatting sdcard:/.android_secure...
Data wipe complete.
E: cant open /tmp.recovery.log
then i choose: install zip from sdcard
i chose the rom zip.
--installing: sdcard:wajkiui..
Finding update package..
opening update package..
Installing update...
E: Can't make /tmp/update_binary
Installation aborted.
Ok...
I dont't know what it could be...
Try wipe dalvik cache too.(under avanced menu)
And try to format your sd card.
It worked for me with the "shadow_2.3.4-134_DFP-10.sbf".
rooted by "root4defy134.zip" (applied in stock motorola recovery)
then installed 2ndinit 1.4.2 (2.0 worked too) and installed the latest wajkiui.
Try downloading the zip file again. Maybe it's corrupted.
Sent from my MB526 using XDA App
I've formatted the memory card..i downloaded the rom again..the problem isn't with the rom..its in the RECOVERY option..cuz b4 installing the rom the device isn't able to wipe neither the cache nor the data...and after that the rom is unable to install
plus the (avanced menu) isn't showing,
i really don't know what to do next...
Ok.
Just try now with 2nd init 2.0. Insall 1.0.7(it wil ask during install recovery,WIFI nedded)
Now you must have advanced menu.
I've done what u told me,,,and it WORKED ..yaay..lol
thats alot buddy, i've been trying to fix it for the past 3 days..and u've helped me alot..even though i insalled many roms inclding the Waijk using the same old version of 2nd init..i don't know why it gave me so much truble sudenly..anyways the problem is solved with YOUR help..
I want to thank u for ur time and concern,,
That's cool! I'm glad that I could help.
buruss said:
Ok.
Just try now with 2nd init 2.0. Insall 1.0.7(it wil ask during install recovery,WIFI nedded)
Now you must have advanced menu.
Click to expand...
Click to collapse
how to do this... please help me.. i wanna install cutom rom like thread stater, now stuck at splash screen
Hi guys, I hope you can help me.
I have just rooted + flashed my motorola defy plus for the first time (on any device for that matter)
I installed 2nd init, version 0.6.... or something.
Put a rom, kernel and google apps on my sd-card
Then I turned usb-debugging off and rebooted my phone.
Now I can get into bootmenu, and this is what I do:
1) go to recovery
2) select custom recovery
3) then it says: Clockworkmod Recovery v2.5.1.8
E: Can't open /tmp/recovery.log
4) I then select wipe data/factory reset
5) then it says this: Formatting DATA
Formatting CACHE
FORMATTING SDEXT
No app2sd partition found. Skipping format of /sd-ext
Formatting SDCARD:/.android_secure
Data wipe complete
E: Can't open /tmp/recovery.log
6) After that i select install zip from sdcard
7) then I select choose zip from sdcard
8) then I select the zip file containing the rom
9) And it says: Finding update package
Opening update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted
Now I can't go any further and can't use my phone at all
I hope u guys can help me, and that I haven't F*ed up my phone
I have a quite similar problem.
On a defy+,rooted 2ndinit installed, backup-ed first, download the new quarx05/03 ICS, put the zip on sd, wipe data, reboot and start to install ics, but the message was
''Finding update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted"
Thanks to the previously backup I can use may phone as usual.
What I have done wrong with de ICS installation?
Thanks
PS. Sorry for probable a dummie question:What we have to do with md5 zip near the CM9 Jordan.zip?
A little help please about the subject?
Thank you
ics
The entire process
ClockworkMode v2.5.1.8
Wipping data...
Formatting DATA...
Formatting CACHE...
Formatting SDEXT..
No app2sd partition found.Skipping format of /sd-ext.
Formatting SDCARD: /.android_secure...
Data wipe complete
E: Can't open /tmp/recovery.log...
Installing: SDCard:download/CM9-ICS-MR1-120305-jordan.zip
Finding update package
Opening update package
Installing update
E: Can't make /tmp/update_binary
Installation aborted
if try Wipe Dalvik Cache:
E: Can't mount /dev/block/mmcblk0p2
(No such file or directory)
I guess that this is a simple and many times occured error, since nobody has any answer....
Does you disabled the usb debugging before flashing?
Yes I do, but nothing change,
Thanks
if I'm not mistaken the last release of 2nd init is not compatible with defy. Try to check this on the development forum. I hope I have been of help.
I'd tried with both 1.0.7 latest and 0.6.1.
With latest, the phone is blocked.
Thanks
I had used this. Try with it
P.S. sorry for my bad english.
Tried, the same errors,
Thanks
I don't know. Sorry. By the time i had used that.
I think you need to go to stable recovery after you wipe your data from custom recovery
Sent from my MB525 using xda premium
I think you need to go to stable recovery after you wipe your data from custom recovery
What do you mean by "stable recovery"? You talk about version 0.6. of 2nd init or something else?
Can you show a step-by step procedure?
Thank you in advance.
However, which is the procedure to un-root a defy+ and to have it with the original, fresh system?
I had flash a new SBF, root with Unlockroot v2.3, anything else doesn't work, 2ndinit v2.0 stable, wipe data/cache/dalvik (same errors), try to install cm9-ics, the same error "Can't make /tmp/update_binary"
What the f.....?
cretu22 said:
I had flash a new SBF, root with Unlockroot v2.3, anything else doesn't work, 2ndinit v2.0 stable, wipe data/cache/dalvik (same errors), try to install cm9-ics, the same error "Can't make /tmp/update_binary"
What the f.....?
Click to expand...
Click to collapse
Hi, I have exactly the same problem.. Trying to find a solution but is quite difficult. First I thought it has something to do with the partitioning, as stated in THIS topic. But, in THIS topic, people say that partitioning the SD card is not necessary at all..
@Cretu22: Yes stable recovery is CWM 0.6
Don't install stable recovery! I too faced this issue when I flashed using stable recovery. In snd init install Latest recovery and then try flashing your ROM. That should work..
I did choose the stable version indeed 0.6.7.
Now i did uninstall it and installed the latest 1.0.7, but when I reboot my phone it won't get into the boot menu but just boots into android. Tried it several times, but only with 0.6.7 I seem to be able to get in the menu
fokkeh said:
I did choose the stable version indeed 0.6.7.
Now i did uninstall it and installed the latest 1.0.7, but when I reboot my phone it won't get into the boot menu but just boots into android. Tried it several times, but only with 0.6.7 I seem to be able to get in the menu
Click to expand...
Click to collapse
Okay!! I hope you were pressing the volume down button when the blue LED came?? Try doing this again all over.. I mean reinstall 2nd init and then latest recovery.. I remember doing this once(instal latest recovery after I installed stable recovery)..
pranks1989 said:
Okay!! I hope you were pressing the volume down button when the blue LED came?? Try doing this again all over.. I mean reinstall 2nd init and then latest recovery.. I remember doing this once(instal latest recovery after I installed stable recovery)..
Click to expand...
Click to collapse
Yes, its working Pressing the volume down button was not necessary with 0.6.7, that was what went wrong. Now the zips installed like a charm
i know the answer and is very simple
the problem is that you cannot create that specific folder.... because it already exist, cmp (connected music player) creates it, just delete it from SD and done!
i tried to wipe date by android recovery system and from then my note cant boot, i cant access clockworkmod but i cant restore from a nadroid backup , its says error while mounting /system... any help???
also on the startup i got a message
applied the csc-code : XEU
Successfully applied mmulti-csc
e:failed to mount /data (Invalid argument)
e:copy_log_files_to_data :: can't mount /data
mesiah said:
i tried to wipe date by android recovery system and from then my note cant boot, i cant access clockworkmod but i cant restore from a nadroid backup , its says error while mounting /system... any help???
also on the startup i got a message
applied the csc-code : XEU
Successfully applied mmulti-csc
e:failed to mount /data (Invalid argument)
e:copy_log_files_to_data :: can't mount /data
Click to expand...
Click to collapse
mesiah, you have the correct nick....you havenĀ“t read about the Hardbrick bug, have u??...You are not supposed to wipe running an ICS kernel...read this:
http://forum.xda-developers.com/showthread.php?t=1633943
try using odin to flash back to stock GB...but if you get stuck in the NAND WRITE part...I have bad news for u.
i tried it but nothing, also i tried to install a rom that i have stored in my sd, it started but it stuck in 57% of the installation... do you have any explain ??``
i tried it again and it stuck on 80%
mesiah said:
i tried it but nothing, also i tried to install a rom that i have stored in my sd, it started but it stuck in 57% of the installation... do you have any explain ??``
i tried it again and it stuck on 80%
Click to expand...
Click to collapse
You are probably hardbricked for wiping in ICS....read the post I sent u.
when i open the device it stucks in samsung logo as i have read in this guide http://forum.xda-developers.com/showthread.php?t=1656635 this is a soft brick as i understand??? i confused ... what options i have???
mesiah said:
when i open the device it stucks in samsung logo as i have read in this guide http://forum.xda-developers.com/showthread.php?t=1656635 this is a soft brick as i understand??? i confused ... what options i have???
Click to expand...
Click to collapse
mesiah...I have already told u...flash a stock GB firmware with ODIN PC....if you get stuck there, then u are hardbricked...
glevitan said:
mesiah...I have already told u...flash a stock GB firmware with ODIN PC....if you get stuck there, then u are hardbricked...
Click to expand...
Click to collapse
can samsung fix it?
mesiah said:
can samsung fix it?
Click to expand...
Click to collapse
If it's hardbrick and you are under warranty, then you will have to use your warranty and they will either replace your phone or give you a new motherboard.
so do you know the cost?? i have one more samsung galaxy note with a dangerous kernel , what i have to do ?
read the stickies in the forum. they really describe the problem in detail.
hi guys.
i need help.
im very noob/new in android thing.
right now im stuck on installing CM10.2 on my galaxy s4.
here is my condition.
-galaxy s4 GTi9500
-vers 4.3
-rooted
-CWM v6.0.3.2
-have done backup on CWM both sdcard and external sd
-wanna install cm-10.2.0-jfltexx ( i dont know whether it is right)
-wiped data/factory reset , cache, dalvik cache.
- cant restore from bot sd card / external sd . On sd card it stated MD5 mismatch. on external sd cant restore /data.
- I put my ZIP file on external sd.
-When i wanna install zip. it stated Assert failed : getprop (ro.product.device)=jftleatt Status 7 Installation aborted.
-now i also cant boot my phone. STUCK on Samsung logo.
Help me guys. im frustated
1. Download with ur pc other ROM correct for ur device
2. U wiped all before (u cant recover nothing now if u had MD5 mismatch). Wipe all again
3. Go to DOWNLOAD MODE with ur phone
4. Flash it and enjoy :highfive:
Joku1981 said:
1. Download with ur pc other ROM correct for ur device
2. U wiped all before (u cant recover nothing now if u had MD5 mismatch). Wipe all again
3. Go to DOWNLOAD MODE with ur phone
4. Flash it and enjoy :highfive:
Click to expand...
Click to collapse
hi thanks for reply.
you meant download other CM ROM? or stock ROM ?
and how to flash it?
thankss
snoir said:
hi thanks for reply.
you meant download other CM ROM? or stock ROM ?
and how to flash it?
thankss
Click to expand...
Click to collapse
Since you formatted your phone and lost backup you have to flash a stock firmware to your phone via odin and then do anything you want