im trying to install the new lvsw rom and i'm getting the an error message ''RUUWRAPPER.EXE APPLICATION ERROR'' can someone tell how to make this work
Do you have .net 2.0 installed? If so, have you tried redownloading the file?
gemini7866 said:
im trying to install the new lvsw rom and i'm getting the an error message ''RUUWRAPPER.EXE APPLICATION ERROR'' can someone tell how to make this work
Click to expand...
Click to collapse
see the guide for upgrading to LVSW. This will talk your through it. Read it through word for word and you will be fine.
CRC Error
trying to download the RUUWrapper but when i try to unzip it
it says CRC Error
plzzz help
I just bout an HD2 with android software already installed. The problem is that the person I bought it from still has their gmail account and contacts still on the phone. I did a factory reset and that obviously did nothing. I cannot delete his gmail account and I cannot sign into the marketplace because it asks for his gmail login only. I have been at this for hours, even researching to reinstall the software. I got the MAGLDR loaded fine, but my phone will not connect to windows mobile. I had to hold down the power button and the lower volume button to get into usb mode for it to reinstall MAGLDR. It worked fine, but when I open up DAF.exe as administrator I get the same error everytime. Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
I even tried it on my computer that has XP and get the same message. I downloaded Andexplorer.apk on the phone to try and find the data.img to delete manually but couldn't find the file. The phone works great, I just need to DELETE his GMAIL ACCOUNT completely off the phone. Any help is much appreciated!!
If your phone has the Setup icon included, you need to activate that app so that you can go into the initial set up of your phone. Then you should be able to enter YOUR user id and password for the Google Account. As long as you are able to get into the initial setup screens of the phone, then you should be able to change the user id and password for the Google Account so that it will recognize you and not the previous owner.
Did you go into the address book under accounts and just remove the account? As far as I know you can delete it from there and then just add your own.
Installed on nand or sd card? Why not just flash your own rom? Problem solved.
Sent from my HTC Glacier using XDA App
I can get into setup but when I get to the google account screen, his email already shows up and has a green check mark next to it. I tried clicking on it to open it but it will not do anything. If I go into gmail and view accounts and select his account and hit delete, it says I must do a factory reset which doesnt work either
Same problem I had.
What I did was flash a ROM update for Core Droid and did the initial set up.
Problem Solved.
zenproverb said:
Did you go into the address book under accounts and just remove the account? As far as I know you can delete it from there and then just add your own.
Click to expand...
Click to collapse
IME this does NOT work because it says "some apps require this account to be active" or something like that. 99% sure this does not work
705 said:
Installed on nand or sd card? Why not just flash your own rom? Problem solved.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I think he's getting two things mixed up. He talked about Winmo first, then loaded Magldr, then looked for a data.img. Sounds like he's confusing NAND/SD.
when you try to run DAF.exe, make sure it's not a Clockwork ROM, and also make sure that on the phone you are in USB Flasher mode.
kane0127 said:
I can get into setup but when I get to the google account screen, his email already shows up and has a green check mark next to it. I tried clicking on it to open it but it will not do anything. If I go into gmail and view accounts and select his account and hit delete, it says I must do a factory reset which doesnt work either
Click to expand...
Click to collapse
Yeah, then you're just going to have to go with the obvious and flash in a new ROM.
its on nand. Not sure how to flash my own rom??
I agree you have to flash a new ROM I dont know if your on SD or NAND but NAND is probably the way to go
here is a link to the guide that tells you how to flash it
http://forum.xda-developers.com/showthread.php?t=893948
if you follow it you shouldn't have many problems, once you find the build thats best for you and flash it you will go through the setup process as if it were new out the box
BTW if you need help, or get stuck Google is your friend, there are a lot of nice people on this forum that will helpout too
Yeah I tried that already. I get stuck when I open up DAF.EXE thats when I get the the errors
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
Can you boot into recovery? Flash a new zip format thru CWM recovery.
Sent from my HTC Glacier using XDA App
kane0127 said:
Yeah I tried that already. I get stuck when I open up DAF.EXE thats when I get the the errors
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (712)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (291)
Click to expand...
Click to collapse
Run it as admin.
Sent from my HTC HD2 using XDA Premium App
I am trying to install [28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4][K: tytung_r10] by tytung.
MAGLDR 1.13 has installed correctly
Downloaded MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip, but when I run DAF.exe file I get the following message:
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
My device has on it:
Device: HTC HD2
HSPL: 2.08.HSPL
Radio: Leo_RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
I previously had NexusHD2-Froyo V1.9G NAND and it worked fine.
I even reinstalled WM 6.5 and started from scratch, but still had same error as above.
Please Help
You are missing files on the zip file.
Go to this link and download the CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.RAR
then extract rapitool.exe and enterbootloader.exe to your MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M folder.
Don't worry you are not replacing any files, these are the files that missing from the build.
http://forum.xda-developers.com/showthread.php?t=915159
After you placed this files try to flash it again. Let me know if you have any questions.
Sent from my HTC HD2 using XDA App
shankar10 said:
You are missing files on the zip file.
Go to this link and download the CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.RAR
then extract rapitool.exe and enterbootloader.exe to your MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M folder.
Hello shankar10,
I have done as you suggested (the files were already there, but I replaced them just incase), still have the same error message.
The only difference in the 2 zip files is the last file:
"recovery_3.2.0.0_leo.img" in the file you suggested and
"recovery-raw.img" in the file I downloaded from tytung.
Your help in this is most appreciated.
Click to expand...
Click to collapse
Davidban64 said:
shankar10 said:
You are missing files on the zip file.
Go to this link and download the CMYLXGOs.ClockworkMod.Recovery.Partition.Setup.02.04.2011.RAR
then extract rapitool.exe and enterbootloader.exe to your MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M folder.
Hello shankar10,
I have done as you suggested (the files were already there, but I replaced them just incase), still have the same error message.
The only difference in the 2 zip files is the last file:
"recovery_3.2.0.0_leo.img" in the file you suggested and
"recovery-raw.img" in the file I downloaded from tytung.
Your help in this is most appreciated.
Click to expand...
Click to collapse
In that case, go to activesync, settings and disable allow usb connection. then right click on the DAF.exe and properties. Make sure the compatibility is not set to like windows xp SP2, in other words make sure to uncheck the compatibility.
Run as administrator, this should work.
just a word of caution, DO NOT REPLACE ANY OTHER FILES other than I specified above. Which are rapitool.exe and enterbootloader.exe
Click to expand...
Click to collapse
u can just use the tool kit and choose 135lb with 5mb cache ...its the same
shankar10 said:
Davidban64 said:
In that case, go to activesync, settings and disable allow usb connection. then right click on the DAF.exe and properties. Make sure the compatibility is not set to like windows xp SP2, in other words make sure to uncheck the compatibility.
Run as administrator, this should work.
just a word of caution, DO NOT REPLACE ANY OTHER FILES other than I specified above. Which are rapitool.exe and enterbootloader.exe
Click to expand...
Click to collapse
Okay, I have followed the above. But I couldn't see on "DAF.exe" when right clicked, 'propertiies' or anything to change 'compatibility'. I use Windows 7 on my pc.
I have retried the whole process, but still the same error message! The phone currently has WM 6.5 on it. Surely, if I follow the instructions on tytung's thread and the files within the zip files are correct, it should work. so what am I doing wrong
Just a thought: I have "CotullaHSPL 0x50" rather than "CotullaHSPL 0x30" on phone, could that be the problem?
All other requirements as per tytung's thread are correct.
Okay: Splash screen after pressing vol dwn during power on =
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Is this correct?
Click to expand...
Click to collapse
Davidban64 said:
I am trying to install [28.June.2011][MAG/cLK] NexusHD2-Gingerbread V2.8 [GRJ22/Android2.3.4][K: tytung_r10] by tytung.
MAGLDR 1.13 has installed correctly
Downloaded MAGLDR_CWM_Recovery_v3.2.0.0_for_NexusHD2_135M.zip, but when I run DAF.exe file I get the following message:
An error has occurred
Read below for more information
Error Description: Config load failed.
Info: .\RSPL\RSPL.cpp (725)
Error Description: CONFIG: can't open config file
Info: .\RSPL\RSPL.cpp (304)
My device has on it:
Device: HTC HD2
HSPL: 2.08.HSPL
Radio: Leo_RADIO_2.15.50.14
Bootloader: MAGLDR 1.13
I previously had NexusHD2-Froyo V1.9G NAND and it worked fine.
I even reinstalled WM 6.5 and started from scratch, but still had same error as above.
Please Help
Click to expand...
Click to collapse
If you are flashing this ROM I think you may have the wrong version. This version is the one to copy on an SD card because it does not say "NAND" in the description.
ketzazu said:
If you are flashing this ROM I think you may have the wrong version. This version is the one to copy on an SD card because it does not say "NAND" in the description.
Click to expand...
Click to collapse
hmmm interesting thought, however looking at the installation guide @ point 3
Flash Android ROM
Enter ClockworkMod Recovery when you're on MAGLDR 1.13 (hold "Power" button during boot) and select "AD Recovery" or "Boot AD SD" (if ever copied CWM's initrd.gz and zImage to SD).
Flash NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update.zip (85.27 MB)
the file name to download has "nand" in it!
If any of you can message tytung for me to confirm if it's nand or not, would be appreciated. System won't let me send a direct message as I don't qualify for that at this time
Or get tytung to email me directly at [email protected]
here is the document contains how to do clean installation. this might help.
Just want to make sure you have the international version right? not the T-mobile one?
let me know how did go.
shankar10 said:
here is the document contains how to do clean installation. this might help.
Just want to make sure you have the international version right? not the T-mobile one?
let me know how did go.
Click to expand...
Click to collapse
Thanks Shanka10,
unfortunatly, after following the guide you provided, and flashing the ClockworkMod Recovery version posted in OP of TyphooN thread (run DAF.exe)
I still got the following error message:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
I did follow all steps correctly, even using all the files linked in the guide
My Htc HD2 is the international version.
I'm stumped for ideas, after following the guide to the letter, I still fail. I hope you can provide a solution.........
Davidban64 said:
Thanks Shanka10,
unfortunatly, after following the guide you provided, and flashing the ClockworkMod Recovery version posted in OP of TyphooN thread (run DAF.exe)
I still got the following error message:
An error has occurred
Read below for more information
Error Description: USB init failed
Info: .\RSPL\RSPL.cpp (736)
Error Description: EnterBootloader missing
Info: .\RSPL\BootLoader.cpp (176)
I did follow all steps correctly, even using all the files linked in the guide
My Htc HD2 is the international version.
I'm stumped for ideas, after following the guide to the letter, I still fail. I hope you can provide a solution.........
Click to expand...
Click to collapse
if u can run task 29 and install magldr and stuck only on recovery this mean something is wrong in ur computer ...try the toolkit and even if u have the problem try again and again ( it happend to me once and i just kept trying and trying and i did it) or change the computer iy might help
mootmetal said:
if u can run task 29 and install magldr and stuck only on recovery this mean something is wrong in ur computer ...try the toolkit and even if u have the problem try again and again ( it happend to me once and i just kept trying and trying and i did it) or change the computer iy might help
Click to expand...
Click to collapse
Okay, I've just tried it all again, even several times aon an windows xp pc, still no luck
Davidban64 said:
Okay, I've just tried it all again, even several times aon an windows xp pc, still no luck
Click to expand...
Click to collapse
That's bad dude!
I don't know what else I can do. Do you mind doing a video of what you doing and upload it here. That might help us to see what's going on.
You really need to do some extensive search online, see if others had a same problem and how they resolved it.
shankar10 said:
That's bad dude!
I don't know what else I can do. Do you mind doing a video of what you doing and upload it here. That might help us to see what's going on.
You really need to do some extensive search online, see if others had a same problem and how they resolved it.
Click to expand...
Click to collapse
I did manage to find another thread with similar problems and followed some of there actions, to no avail.
Its just really strange. I had Tytung's [26.JAN][DFT/CWM] NexusHD2-Froyo V1.9G [Android2.2.2][Kernel: tytung_r2_oldcam] installed on this phone previously and all worked well. Worst thing is, that I put WM 6.5 last night thinking that if I start from scratch and realy watch what I am doing then I might get it right, but now I can't even get MAGLDR 1.13 to go on it.
Sorry, but I don't have a vid cam to record & upload.
More searching I will do, but I am just not sure where I'm going wrong (and it's not that hard really and that's sooo frustrating)
Thanks shankar10 for your hepl though and others
Davidban64 said:
I did manage to find another thread with similar problems and followed some of there actions, to no avail.
Its just really strange. I had Tytung's [26.JAN][DFT/CWM] NexusHD2-Froyo V1.9G [Android2.2.2][Kernel: tytung_r2_oldcam] installed on this phone previously and all worked well. Worst thing is, that I put WM 6.5 last night thinking that if I start from scratch and realy watch what I am doing then I might get it right, but now I can't even get MAGLDR 1.13 to go on it.
Sorry, but I don't have a vid cam to record & upload.
More searching I will do, but I am just not sure where I'm going wrong (and it's not that hard really and that's sooo frustrating)
Thanks shankar10 for your hepl though and others
Click to expand...
Click to collapse
No problem, glad to help.
One more thing, why don't you do a task29 and this will allow you to clear any partition and other junk.
then install the wm6 then do the Android. Currently I have the following ROM on my phone
http://forum.xda-developers.com/showthread.php?t=915159
Try to install this and see if this works. Make sure you get the second one which is the international version.
Also, here is a video for you, this might help you a lot.
http://www.jayceooi.com/2011/01/07/...-on-htc-hd2-with-clockworkmod-recovery-video/
I'm not trying to question your intelligence but sometime we might forget to do a tiny step, which leads to big problem, so following this video will help you a lot to avoid those circumstances.
good luck
...and the continuing saga
Okay, I have reflashed an original HTC HD2 WWE 3.14 Rom.
Then:
Clean Install MAGLDR:
1. Task 29
2. Flash Radio(2.15 Recommended)
3. MAGLDR 1.13
..... (why me?) after lashing MAGLDER 1.13, reboot holding down power button, all I get is white screen with HTC on it.
So what would I have done wrong?
Radio is Leo 2.15.50.14
shankar10 said:
I'm not trying to question your intelligence but sometime we might forget to do a tiny step, which leads to big problem, so following this video will help you a lot to avoid those circumstances.
good luck
Click to expand...
Click to collapse
Shankar10, A BIG THANKYOU FOR YOUR HELP
I HAVE FOUND THE PROBLEM. IT WAS VERY SIMPLE:
TURN OFF ANTIVIRUS
And a big thanks to every one else for advice given
David
Glad you figure it out. It's a good learning curve for everyone. Next time we can suggest others to do the same if they having the same problem.
Sent from my HTC HD2 using XDA App
Hi, I've been trying installing Mwakious Sense runningrom v. 2.1 in the HTC Leo of a friend, I have no problems til it comes to the point of installing the rom from the zip file on CWM 2.3.0.0
It completes half of the installation, than the status bar sticks and the log only says "error in sd card/mwakious sense runningrom v.2.1 wipe.zip" or something similar, than "(status 0) and "installation aborted" how can I solve this problem? is it a problem of the Rom? I only need a rom with gingerbread and sense 3.0 at least, that works with clk, my friend isn't skilled on tecnologies so she needs a rom which is as native as possible of a normal htc sense with android, this is also why I avoid using magldr... please HELP me!!!
Thanks
re-format the sd card and try again. or try with another sd card
This card's the only one I have 4 the moment... I'll try reformatting and repartitioning it... thanks 4 the moment
can also happen if the zip file is corrupt, might want to see if thats the case
Richy99 said:
can also happen if the zip file is corrupt, might want to see if thats the case
Click to expand...
Click to collapse
Don't think so... I downloaded it so many times... same error everytime
But there are some news... Mwakious says he's using recovery 5.0.3.2 but I don't own the .batch to upgrade my 4.0.0.0 tho this 5.0.2.3
Plus, Mwakious also says that if getting error 0 during installation than I hv to substitute the update_script file with his modified one... I tried it and cwm gets another error, error 6 this time... I'm really in need of help because I hv to find a solution for tomorrow at least! HELP!!