[WIP] Unofficial CM9 beta 7/14/12 - Droid Eris Android Development

This is still a work in progress but pretty much everything I can test works.
I'll work on the OP later but I've been asked about it a lot so thought I'd post it for you guys to play with as you wish.
Post bugs here so I can address them as needed.
Credits:
Cyanogenmod - source
Mongoosehelix - kernel & ics tree
conap - kernel
workshed - kernel & ics tree
tazzpatriot
I'm sure theres others and if I've missed you I apologize. Let me know and I'll add you.
I'll update this OP with more links, etc. later
ROM currently has Evervolv stock ICS kernel.
Download:
Eris CM9 Beta
You'll need to install gapps as well.. the tiny gapps from mongoose's thread will work fine
As always, what you do with your phone is your responsibility, not mine.... Have fun

I can't get past the setup wizard. I tap the droid, and it keeps telling me that setup wizard has stopped, then it goes right back to touch the android to begin
E: got past the setup wizard. I forgot about touching the four corners to bypass it. gonna test this out now.

hey hey! see you guys arent dead yet lol
great to see you got a cm9 port up and running, keep up the good work

Damn, just in time for jelly bean! I'll check this out soon!

I started from scratch again, just to make sure I didn't do something funny the first time I installed it. So far I've found Setup wizard will not work, so it has to be bypassed in order to start doing anything. Calendar will not show anything. It claims it is sync'd in accounts, but in the calendar app itself, nothing shows up. It doesn't show any calendars listed under the account in settings either.
It looks pretty sharp, however, and seems to be fairly full featured for a brand new 'WIP"
E: Sounds are very quiet, even at max volume. I can barely hear ringtones/alarms, etc in a quiet room.

Sounds awesome. I'll try it out ASAP.

It's great have a camera that will focus!! A few things I found though, were that while the camera would switch to camcorder (which is awesome!), it wouldn't record. Also, the home button doesn't work.

jaebond said:
It's great have a camera that will focus!! A few things I found though, were that while the camera would switch to camcorder (which is awesome!), it wouldn't record. Also, the home button doesn't work.
Click to expand...
Click to collapse
Thanks for the report on what works and what doesn't. Any other major observations?

camcorder preview works, but its due to camera.msm7k.so in /lib/hw that is only built right now to take pictures and display preview. this will hopefully be fixed in the future easily as htc wildfire (buzz) has camcorder working, so we will have to see what erwinp did to get it working.

Yay

roirraW "edor" ehT said:
Thanks for the report on what works and what doesn't. Any other major observations?
Click to expand...
Click to collapse
I haven't played with it too much, but it seems just a tick slower than Evervolv (I think), but seems to have better battery life (I think). Also, I forgot to mention, the USB Mass Storage thing is a little wonky, For example, it pops up when I plug it into the wall. One thing I want to check is whether the headphone jack works.
ETA: Titanium Backup just failed to get root rights. Not sure if that has anything to do with the ROM though.
Another update is that the microphone doesn't work for making calls.

I haven't done much more with this yet, but I got bored today after sitting at the hospital most of the day......
What's coming is already better for me than cm9...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from Kangdemnation

CondemnedSoul said:
I haven't done much more with this yet, but I got bored today after sitting at the hospital most of the day......
What's coming is already better for me than cm9...
Click to expand...
Click to collapse
Hi, hope everything's okay re: the hospital visit. Looking forward to trying this when you have the time.

roirraW "edor" ehT said:
Hi, hope everything's okay re: the hospital visit. Looking forward to trying this when you have the time.
Click to expand...
Click to collapse
Possibly tonight. One thing that I can tell so far that needs addressed. Everything else that I can test... WiFi, camera, use mount, etc is working. Haven't tried camcorder yet though.
Sent from Kangdemnation

gapps
could someone please link me to mongooses's gapps I cant seem to find the thread.

|shaneo| said:
could someone please link me to mongooses's gapps I cant seem to find the thread.
Click to expand...
Click to collapse
I'm guessing he means from [ROM][AOSP] 4.1.1 JellyBean | Evervolv-Eligo | 3.0.0p2 | 8/26/12, it's in the first post.

Related

Wheel-2-Unlock is UNDER DEVELOPEMENT!!!

EDIT: UNDER DEVELOPEMENT AND WILL BE RELEASED WHEN READY! KEEP AN EYE ON THIS THREAD!!!!
Here's an idea... when you turn your phone off, it locks... when you turn it on, you must roll your thumb/finger to the right around the wheel of the diamond to unlock it...
as you wheel around, the white line around the circle begins to fill from the top, moving rightward around...
sorry for the poor image quality, i just threw it together as a thought.
I hope a developer can throw this together, prolly isn't hard at all and would really be cool for the diamond. Better graphics and glowing line ofcourse.
its simple and utilizes the unique hardware of the diamond, and also the pro.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
anyone like?
anyone down to try and create it?
Wish i could, but i have no idea where to start. i'm in the dark here.
to clear up any confusion that may come up, the lights on the wheel itself don't need to light up as you wheel around... only the circle on the screen.
as you would pass a point on the wheel, another section of the ring on the screen would fill in.
Sounds like a good idea. Hope someone have the time to make it.
im sure that 'wheel-2-unlock' is one of the features of the TouchXperience ROM but it would take a long time for this rom to be released i guess.
TouchXperience is a ROM? Not just a cab installation?
http://www.touchxperience.com/en/touchxperience.html
I really want this app....I miss many calls...
sounds good, i hope someone can do it
Ok guys, i got a good man to try and put this together... he's farther along than he thought and will be releasing something when he feels its ready to meet the world!
Sounds like a good idea - I posted something very like it in the AnswerKeys Disabler thread a few weeks ago!
Glad someone has the skills to make it happen!
subscribed to the thread
Actually there IS such programm already: http://4pda.ru/forum/index.php?showtopic=83359&st=125&start=125
Maybe you should contact the author and try to develop together?)
Addicteddddd said:
subscribed to the thread
Click to expand...
Click to collapse
me too, (and now just lengthing my post to be > 10 characters )
baskalex said:
Actually there IS such programm already: http://4pda.ru/forum/index.php?showtopic=83359&st=125&start=125
Maybe you should contact the author and try to develop together?)
Click to expand...
Click to collapse
i just DL'd that file on there and it wouldn't load on the phone... Prolly a difference in english device and whatever language that is device...
I'm not the primary developer cuz i don't know how to do so yet, but my boy on another forum is the one working on it... lets see what he comes up with.
i'll run it by him if he wants to talk to that R2U dev
hello
what about first version.
Im waiting forward.
lamdami said:
I really want this app....I miss many calls...
Click to expand...
Click to collapse
Use S2U2 its the same function you miss no calls anymore when use.
grtzzz
CapacitiveFingerLock
I am working on such an idea already for a week or so:
CapacitiveFingerLock.
It will have another locking/unlocking mechanism on top of StylusLock, as described in this post:
http://forum.xda-developers.com/showpost.php?p=2681112&postcount=62
Because I am now on a business trip in America, I had not much time to work on the program. But I haven proven already that it works. I have to remove some stuff from the proven program, and integrate it with my already existing StylusLock. The goal is that it does NOT cost extra battery power and CPU and is really simple to use.
The reason to add this, is to have it possible to lock and unlock "one handed". The StylusLock approach cannot be done "one handed", e.g. on a bike. Also some people do not like to operate with the StylusLock. The combination with this new CapacitiveFingerLock and existing StylusLock will suit more people. And sometimes people will use the Stylus, so they will get the right behaviour depended on the usage.
Good idea, as I do not use any locks or such applications, but this one sounds nice. Just remember that this app should not conflict with, or somehow overcover and incomming call
ZuinigeRijder said:
I am working on such an idea already for a week or so:
CapacitiveFingerLock.
Click to expand...
Click to collapse
Woohoo, I've been asking for such a thing for weeks now. Do you have a working version already?
That would be awesome.
Definitely MUCH MUCH better than SensorLock and all the - no need to mention - rest!
Especially because SensorLock is still buggy as hell!

[ROM] DamageR_DCG v4.6 Port Rev 2 [Nav version up] (6/16/10) OC/JIT/LWP/APPS2SD

PLEASE READ EVERYTHING IN THIS POST BEFORE FLASHING THIS ROM!
I am not responsible if you brick your phone, it explodes, causes global warming or spills millions of gallons of oil into the ocean.
I'm proud to present, DamageR_DCG v4.6 Eris Port
I absolutely love this ROM, it's so smooth and fast. I constantly get about 70-100 MB of ram free (it zipalign's at boot) and the LWP look great!
I did NOT create this wonderful ROM, I just ported it over to our phone from the Hero.
Thanks to:
MagnusRagnarok - For making this ROM and allowing me to port it over
Spencer_Moore - For helping me with a few problems I had while porting
Tazzpatriot - Helping with problems as well
jcase - For plain jaine rom
ivanmmj - Eris official rom
Zanfur - His OC kernel
Parts of this rom are from both Plain Jaine by jcase and Ivan's official 80t or something like that. Thank you both!
MagnusRagnarok said:
INSIDE:
+JsChiSurf rosie remap
+ADW launcher home
+Cyan MMS & Music
+DCG_DARK Theme
+Aloyisius raised dialer (Thanks Konikub!)
+Cyan Dialer
+Gomorrah Dialer 1
+system utilities:Systray,Andro,Battery widget
+Dark Themed rosie
+Themed HTC_IME mod (Thanks jonasl), Vanilla KB and themed Swype keyboard
+BOOT by WRX4MEMP(click to see)​
Click to expand...
Click to collapse
If you enable JIT, get ready to reboot a lot. JIT is still VERY unstable. It'll bump you up from 3.1 mflops to 5.1 though.
What I've done:
The initial port, bugfixes, etc
Removed:
DCUpdater (pointless since you don't have the hero version)
SetCPU on devs request
Original Font. Heard lots of complaints about it and it hurt my eyes. if anyone wants it i'll include it in a flashable update.
BE SURE TO NANDROID AND WIPE DATA/DALVIK BEFORE FLASHING THIS ROM!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD DamageR_DCG.v4.6 Rev 2
This IS a full wipe update. Sorry guys.
Mirrors:
http://www.2shared.com/file/L2T0XXFC/DamageR_DCG_v46_Rev_2.html
DamageR_DCG Rev 2 Nav
Decided to make a version with working Nav, gallery,etc. I also added the fixed calender which I'll add to the main ROM later on
Download SetCPU here: http://forum.xda-developers.com/showthread.php?t=505419 or on the Market for $1.99 or the other overclock widget that slips my mind at the moment..
For best results: In SetCPU choose Autodetect speeds and set it to no more than 768 or else your phone may be put into a bootloop. And put window animations to fast in spare parts.
What works:
Data
Maps
GPS
Proximity sensor
Wifi
Bluetooth
Landscape mode
What doesn't:
MMS (see below)
Facebook sync (see below as well)
Calender FC's (working on that next)
MMS fix: You can fix mms by downloading APN Backup & Restore from the market. I will include the APN you need. Copy the APN to the apn backup folder on your sd card. Go into the app and click delete APNs, then restore apns and choose the fixed apn file. (thanks to Frankenlincoln I think his name is for the fix. If i got your name wrong, sorry and to Ivanmmj for the fixed apn)
Facebook sync: I believe syncing your feed will work, but contacts will not. You'll get a random FC (com.htc.bg) However this is a problem with the MAIN ROM and until Magnus or I find a fix for it here's a work around if you really need it.
Download this app
or just search Facebook sync and it's the first one in the list. Follow the instructions and voila.
If you are seeing abnormal battery drain, please try this:
This should help fix some of the battery issues for most people, as it'll "fix" 3G. Go to your dialer and type *#*#4636*#*# and click "Phone Information" hit the menu key and select "Select Radio Band" it'll FC but this is normal! Scroll down and it'll say "GSM Auto (PRL)" click the arrow next to it and select "CDMA Auto PRL" You'll have to do this every time you reboot but I've noticed improved battery life after doing this.
Thanks goes out to Framework43 for discovering this fix.
Apparently that doesn't stick sometimes, so be sure to do the airplane mode trick too!
If that doesn't help you try this http://wiki.cyanogenmod.com/index.php/Troubleshooting#Battery_recalibration
If you have any problems feel free to tell them here or PM me. Have fun with this! I know I have.
Feeling generous? Donate to my 5 hour energy shot fund
Changelog
Changelog:
Rev 1: Initial port
Rev 2: Fixed Wifi, Bluetooth, orientation sensor, added different gallery (it's a blue icon). Thanks to tazzpatriot for doing this! You may want to still install/download setcpu or Overclock widget again. OC widget IS included but it FC'd on me.
Flashing it now
glad to see u got it working ,, will have to check it out
Thanks. I'll check yours out soon too.
Congrats dude
Spencer_Moore said:
Congrats dude
Click to expand...
Click to collapse
Thanks and thanks for the help.
I <3 new ROMs. Flashing now.
awesome..
ill give this a once over as well..thanks for the port!
Thanks! If any of you could do me a favor, see if wifi and bluetooth are working and lemme know. That'd help a bunch. I don't have the same version as the one I released (didn't get a chance to switch over)
Hey ill test it, loading up right now thanks sheen160 and congrats on the rom port it looks great!
Great rom
This rom is great, and your mms fix worked perfectly, but I am not able to get wifi to work, and I also can't get the screen to rotate. Haven't tested bluetooth as I lost my headset, but other than that it is working fine. Great job, I appreciate the time you have put in to porting this.
Test Drive Feedback
Sheen160 said:
Thanks! If any of you could do me a favor, see if wifi and bluetooth are working and lemme know. That'd help a bunch. I don't have the same version as the one I released (didn't get a chance to switch over)
Click to expand...
Click to collapse
Very fun rom! So far, bluetooth does not work for me. It won't even turn on and locks up for a while. Same with wifi. MMS send does work. Otherwise I am enjoying the rom.
great rom, very fast but no wifi is a pain, and im not sure if its just me but my battery is sucking
Thanks guys. I'll get working on a fix soon. I may take a break tomorrow. Also, I'll put something in the first post about something to help with battery.
link
the download like isnt working.....
Works fine for me.. But don't bother downloading it just yet. Wait until tomorrow when I upload the next version with wifi, bluetooth and orientation fixes.
I like this Rom it has some cool stuff packed with it.
hey man wifi works & i believe bluetooth , i pmed u with what i did , not sure if bluetooth works as i dont have a earpiece but it atleast turns on
Sheen160 said:
Works fine for me.. But don't bother downloading it just yet. Wait until tomorrow when I upload the next version with wifi, bluetooth and orientation fixes.
Click to expand...
Click to collapse
Hey sheen160, this is actually a great rom, fastest ive used! just one question, do you think you can make the update a no wipe? I have many accounts id hate to resetup thanks!

[GUIDE] ANDROIND 2.2 Now With Sense

I haven't seen an easy step by step guide for getting Froyo.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Just download this file and follow this easy instructional video HERE.
Thats it!
visit the spimonkey34 official thread HERE
ENJOY
I wonder if its stable
haha, nice, simple guide..
nice thanks been looking for something like this.
heh
Thanks for this post... some people on here dont like giving simple answers to simple questions sometimes and this is a question that gets asked alot.
Battery Level says 0%
When i first ran Andoird I got real low light from the device had to restart android 3 times for the lights to brighten up. Email is working cant get internet to work and battery reads 0% but on wnidows I have 76%. I would like to learn how to run anroid automatically just a noob at doinf this stuff. Any help would be appreciated. Thank you
Silly question but once isntalled, how do you uninstall it?
ct9 said:
Silly question but once isntalled, how do you uninstall it?
Click to expand...
Click to collapse
Just reset your phone, by either using the button under the back, or hold down the power button in Android.
It's not really installed, more like running on top of windows. Only difference is, you can't close it and get back into windows, you have to restart the device.
21productionz said:
Just reset your phone, by either using the button under the back, or hold down the power button in Android.
It's not really installed, more like running on top of windows. Only difference is, you can't close it and get back into windows, you have to restart the device.
Click to expand...
Click to collapse
cool thanks.
i tryed over and over to get this to work and the closest i could get was to the boot screen i could barely see because it was so dim. so i got my spare freshly formated class 6 8 gig sd/card installed it on it and now it boots up fine.
Is this suppose to last for a while or does it only work for a few minute. after 5 to 15 min it seems to freeze up.
It Works Pretty Good For Me...
Also I never installed the HSPL but it still works. Are you suppose to install it or is it just recomnended?
Still too buggy, random freezes, etc
Your Supposed To Have The HSPL Installed Inorder To Flash Any Other Rom...I Believe It Would Run Better If It Had HSPL
Immoralj said:
Your Supposed To Have The HSPL Installed Inorder To Flash Any Other Rom...I Believe It Would Run Better If It Had HSPL
Click to expand...
Click to collapse
Android for HD2 is not a ROM, instead its booted through HARet and you can run it without HSPL
This Android thing still has another month or two of hard work before it will run right. People are just putting their builds out there for other developers, to show what theyve accomplished so far, and to get people excited. We just gotta be patient and help the devs out.
Success
Finally got it working on my ustmobile hd2 after many tries. This tut was the one that made it easy for me. Thanks to the poster and all those in the scene who have made it possible. I am so excited that we may actually have a stable build in the not so far off future.
I got this to work just fine after a few tries. But I have noticed still there is no way of charging the phone while using Android. And also noticed that it runs down the battery very fast. But hopefully someday soon there will be a fix for charging.
tuppaacc said:
I haven't seen an easy step by step guide for getting Froyo.
Just download this file here: http://x.vu/HD2ANDROID
and RUN.
thats it!
ENJOY
Click to expand...
Click to collapse
YO brotha from anotha motha... soundz convincing.... DO U RUN THIS ON UR HD2??? If so, post ur .... thots..comments...suggestions cuz i KNO ur a RELIABLE source on here
works for me but not chargin and sounds are not very high and when they will sleep the screen is littlt bright but the rest good although I hope in the future continue to work full so great job

[BUILD][10.2.2010][HtcClays SuperDesire V1.0][Beautiful/Smooth/Fast Sense]

Welcome to SuperDesire V1.0 by HtcClay
This is not created by Ciervo5389
All Credits of creation to this ROM goes to HTCCLAY
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
- Sprint-free! Removed all stock Sprint apps
- Removed other bloatware
- Changed boot animation
- Working G-sensor (do not calibrate!)
- Working light sensor
- Bluetooth, Wifi, Data
- Speaker is nice and loud
- 3MP Evo camera and 5MP Nexus camera included
- As per the developers request, SetCPU IS NOT included in this ROM. To get speeds similar to the included screenshot, please download the latest version of SetCPU
- Hastarin Kernel 4.1 or R7
- 1GB Data.img included
Check the changelog below for updates!
Installation:
- Place "Android" folder on the root of your SD card
- With keypad lights on, run "CLRCAD.exe" then "haret.exe"
- First boot will take up to 15 minutes
- Wait to unlock screen until it says to (with blinking arrows)
- After setup, let Google finish syncing before doing anything else
- Wifi may need read "error" after turning on. Try again and it will work.
- Enter APN information manually to get Data working properly.
To get data working:
1. Go to Settings > Wireless & Networks > Mobile Networks > Access Point Names
2. Press the menu button and choose "New APN"
3. Enter your provider-specific information (Google is your friend
4. Press menu and select "Save"
5. Press the radius button next to your new APN and you're good to go!
What doesn't work:
- Camera Flash is still premature
- 011 dialing issue for non-US users (temporary solution found in this thread)
- G-sensor doesn't respond well to being calibrated. Some have said that calibrating the phone facedown works, but this needs to be confirmed.
More Pics will be up soon!!
DOWNLOAD
SuperDesire v1.0
Superdesire V1.0 Megaupload thanks MartyLK
BIG Thanks to
HtcClay
Darkstone
Shu8i
Cyanogen
Mdeejay
infinitybiff
hastarin
Pongster
phiremod​
Changelogs
Extra Doo Doo
how come core team has the evo cam working with the flash 100%
nice theme!!
m-deejay said:
nice theme!!
Click to expand...
Click to collapse
yea his superhd build was pretty good so im sure this will be to but why cant you
guys get the cam flash on time like that core build??????????
wawa144st said:
yea his superhd build was pretty good so im sure this will be to but why cant you
guys get the cam flash on time like that core build??????????
Click to expand...
Click to collapse
I think that build uses michyprimas R11 kernel which is nexus based? not evo. The new evo kernels have the flash problem.
Just a quick question because I do not see is specified...this is PPP correct?
???
Is this the Desire HD build or an EVO build? You could post here some pics of the build so we can see what it is
Does anyone have a mirror? That androidspin link will not work at all for me.
Thanks.
downloading now!
Josh
I love the theme
Super Desire ? or Evo ? ... thanks Clays
tamercan said:
Super Desire ? or Evo ? ... thanks Clays
Click to expand...
Click to collapse
Its actually evo based
LondonTownGuy said:
I think that build uses michyprimas R11 kernel which is nexus based? not evo. The new evo kernels have the flash problem.
Click to expand...
Click to collapse
ok so if i use that kernel would i get the flash good back?
wawa144st said:
ok so if i use that kernel would i get the flash good back?
Click to expand...
Click to collapse
correct.use the r11_n kernel.works amazingly
tehcor said:
correct.use the r11_n kernel.works amazingly
Click to expand...
Click to collapse
ok can you send me the link? and what would be different? like what would i loose out on by switching cause i know every
body changed for a reason right?
yet, another great build
although, small problem.
i presumed that the android default lockscreen would interfere with the default HTC sense alarms going off, although this didn't seem to be the case, as it went off when i did a little test just now.
although, there doesn't seem to be a way to actually turn off the alarm once its actually going off.
please correct me if i'm wrong but this is what i've found
again, thankyou for this build!
wawa144st said:
ok can you send me the link? and what would be different? like what would i loose out on by switching cause i know every
body changed for a reason right?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=756513&highlight=r11
i just pushed it and it fixed the flash on the 5mp cam and music stuttering.so far this build is incredibly stable and fast.got some playing more before i switch from coredroid 0.4
can you show some screens of the theme? don't want to get suprised

Qucik dev question

Hey everyone, right now I am working on a rom for the D2 and I had it all going great and was just about to release it to the community until I came across a pretty major bug with the text color. I fixed that bug with the help of another developer but after fixing the bug I came across a string of other bugs which weren't there before.
Most of the bugs were easily fixable except for a few and one of them I couldn't fix by myself.
The bug is that whenever I am in the settings.apk I cannot access most of the options because it force closes constantly which also results in reboots when I am trying to turn on wifi, gps, etc. It is usable but annoyingly slow. My idea was to just replace the settings.apk and settingsprovider.apk with new/stock ones and I am doing that right now and am going to flash that rom really soon but I am not sure if that will work, any ideas?
Also my logcat looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and just keeps updating the status of the phone position multiple times a second. When I logcat other roms they never constantly update the screen position and I was thinking that this probably sucks the battery dry , does anyone know how to make it update the screen position less often?
Finally I must've misplaced some file in the framework-res.apk and now whenever I try to change the volume of either the ringer or some media the bar that shows how loud it is goes all crazy and turns into a spinner *shown bellow*.
Any help with any of these problems would be great.
Thanks a lot,
ljbaumer
p.s. the rom should be released in a BETA in probably a week once these bugs are fixed and I make a few more changes to the look and speed.
Cool... is this rom based on anouther??? Is it blur or non blur??? Good luck if you need any help hit me up
Sent from my DROIDX using Tapatalk
It's based off of gummyjar but with a lot of changes and tons of stuff from other roms.
It is completely non-blur.
I might include a few pieces of MIUI in it (because I am going to do my best to try and port MIUI over to the D2 from the Droid after this rom).
ljbaumer said:
It's based off of gummyjar but with a lot of changes and tons of stuff from other roms.
It is completely non-blur.
I might include a few pieces of MIUI in it (because I am going to do my best to try and port MIUI over to the D2 from the Droid after this rom).
Click to expand...
Click to collapse
Cool just make sure you give credit to everyones app etc... that you use
If you are really interested in doing this right, I can help you setup your build envirement so you can build your own apps... this is something I have offered since releasing GummyJAR but to date only droid2169 has taken me up on it....
Sent from my DROIDX using Tapatalk
Yeah I definitely will credit everyone!
(I think I PMed you a while back about building my rom from gummyjar but I may have not...)
I hate people who steal work from other people without writing credits.
It would be great if you could help me set up an environment to build apps.
thanks,
ljbaumer
The sound progress issue is linked to progress_horizontal.xml in framework-res/res/drawable. Make sure you have that file edited correctly.
sonnysekhon said:
The sound progress issue is linked to progress_horizontal.xml in framework-res/res/drawable. Make sure you have that file edited correctly.
Click to expand...
Click to collapse
Thanks,
I didn't do any editing to that file.... Should i just replace it with a stock progress_horizontal.xml from a fresh framework-res.apk and see if that fixes it?
ljbaumer said:
Thanks,
I didn't do any editing to that file.... Should i just replace it with a stock progress_horizontal.xml from a fresh framework-res.apk and see if that fixes it?
Click to expand...
Click to collapse
Yes, you can try that. Or use the one from my theme to get the white color.
sonnysekhon said:
Yes, you can try that. Or use the one from my theme to get the white color.
Click to expand...
Click to collapse
thanks, I 'bricked' my phone so I had to SBF and now I am stock again, so I am just rooting over. I'll use the file from your theme so I can get the white one (which looks tight) and then I think I am just going to resync with gummyjar and start over because I just got a new computer for Christmas and I'll just save my system/app and framework-res.apk so that I won't have to do that much editing over again.
thanks,
ljbaumer

Categories

Resources