Related
I figured out that using my Imagio as a WiFi Router drains the battery faster than it can charge. This is bad for a sometimes day-long connection using low bandwidth sites (live blogging for hours on CoverItLive.com).
Typically, I use the Imagio when WiFi isn't available, or is flat out ridiculously priced ($thousands in some convention centers).
I have to work with my partner, who also needs a connection, and sharing it would be oh so convenient using WiFi. So I thought, why not share my Imagio's connection by using Internet Connection Sharing on my computer through the WiFi. Not so fast: all ICS uses a fixed IP of 192.168.0.1. Conflict city when you try to use ICS twice in the same daisy chain.
"So", says I, "why not use Network Bridging to accomplish the same thing?". Well, this works in getting the signal to my partner's machine. She can internet beautifully. But, it turns out, my machine can't access the Internet anymore so long as the Imagio's ICS is bridged to the machine's built in WiFi. Take it out of the bridge, it works on my machine but not my partner's. Put it in the bridge, it doesn't on my machine, but it does on my partner's.
Anyone have any insight as to how this can be accomplished. Imagio ICS via USB to computer A, computer A's Wifi set in ad-hoc mode to be used as a router to get Internet to computer B, both machines being able to access the Internet.
Also, USB-Modem works with ICS on the laptop, but it uses dial-up, and the problem with that is that if you stop using it for a certain period of time, it loses the connection, which can screw up things royally. ICS is much more consistent.
There has to be a way that bridging can be used without taking the Imagio's ICS out of that computer's universe.
None of this would be a problem if she got a WM phone instead of the LG Touch (which requires a hefty monthly plan to use it as a modem).
Thanks to any who know more about this than me or have some other ideas.
--
FB
You can configure ICS on the phone to use a different IP range (probably also possible on the PC but don't know how).
So then you can use Phone->ICS->USB->ComputerA->ICS->Wi-Fi->ComputerB
WMWifiRouter uses 192.168.3.x instead of .0.x by default. I think this can also be configured using ICS Control.
frankenbike said:
I figured out that using my Imagio as a WiFi Router drains the battery faster than it can charge. This is bad for a sometimes day-long connection using low bandwidth sites (live blogging for hours on CoverItLive.com).
Typically, I use the Imagio when WiFi isn't available, or is flat out ridiculously priced ($thousands in some convention centers).
I have to work with my partner, who also needs a connection, and sharing it would be oh so convenient using WiFi. So I thought, why not share my Imagio's connection by using Internet Connection Sharing on my computer through the WiFi. Not so fast: all ICS uses a fixed IP of 192.168.0.1. Conflict city when you try to use ICS twice in the same daisy chain.
"So", says I, "why not use Network Bridging to accomplish the same thing?". Well, this works in getting the signal to my partner's machine. She can internet beautifully. But, it turns out, my machine can't access the Internet anymore so long as the Imagio's ICS is bridged to the machine's built in WiFi. Take it out of the bridge, it works on my machine but not my partner's. Put it in the bridge, it doesn't on my machine, but it does on my partner's.
Anyone have any insight as to how this can be accomplished. Imagio ICS via USB to computer A, computer A's Wifi set in ad-hoc mode to be used as a router to get Internet to computer B, both machines being able to access the Internet.
Also, USB-Modem works with ICS on the laptop, but it uses dial-up, and the problem with that is that if you stop using it for a certain period of time, it loses the connection, which can screw up things royally. ICS is much more consistent.
There has to be a way that bridging can be used without taking the Imagio's ICS out of that computer's universe.
None of this would be a problem if she got a WM phone instead of the LG Touch (which requires a hefty monthly plan to use it as a modem).
Thanks to any who know more about this than me or have some other ideas.
--
FB
Click to expand...
Click to collapse
I use WM WiFirouter, it is a great program with multiple different configurations. I use it at home on an old IPAQ hooked to my PC as a wireless router so my kids can use the internet on their laptops.
WM WiFi Router was my first choice. Note the point I made that the battery drains faster than it can recharge. This becomes something of a problem after an hour or so.
Sadly, I got the connection sharing option to work now on the laptop using ICS control, but it seems to disconnect the WiFi ad-hoc network. And doesn't actually share through the WiFi. I suspect this is a problem with the way the WiFi on the laptop works, since I had the same problem with Network Bridging, and had to run a Dos script to enable the WiFi. It only works when bridging is being used, so I have to find the equivalent for when bridging isn't being used but ICS is.
I don't suppose anyone knows anything about *that*?
EDIT: I just downloaded the latest version of WMWifiRouter, which has USB connection support and seems to be a whole lot more reliable in general. AND IT WORKS with connection sharing, the laptop WiFi works as a router, and it DOES solve my problems. Thanks for the suggestion that made me reconsider it again.
EDIT +1: Still uses up the battery faster than it charges. Not as fast as WiFi though. WMWifiRouter is a pretty amazing connection sharing tool kit with USB, BT and WiFi connectivity and lots of control without the weird IP address pathologies. Amazing that it also gets around my laptop's weird connection sharing WiFi pathology as well. Another nice thing is the "keep connection alive" ping feature, and the real time power status and information. They really try to pack a lot of useful stuff for your $20.
Why is it impossible to use the tethering by BT between the Archos Gen 8 and more android phone ?
fortunately on the nexus one i wil be create a hotspot
but for another phones have you a solution ?
Hy with Samsung Galaxy 9000 it works very easy. Build up a Mobile Hotspot on the SGS and Connect with to the Archos, works perfectly.
Sent from my GT-I9000 using Tapatalk
why it don't work for anothers phones
n1 by eg ?
You can get it to work on N1 too ... but I don't think it is built into the phone though.
I use CyanogenMod 6 on my N1, and there are only options to do Wifi Hotspot (which burns battery power like there is no tomorrow) or USB tehtering.
But if you use the app called Wireless Tether, you can use BT tethering between your Gen8 and your phone.
Rockstar from ArchosFans' forums made a vid on how to do that: http://www.youtube.com/watch?v=CN4hBqIyI-U
i use the same
but for many android phones it is not possible
Yeah, I've been posting this same question all over the place begging for someone to help me tether to my Moto Cliq (rooted with tethering enabled). I even asked Archos and they sent me some generic response that didn't help at all.
I know my Cliq can tether, cause my PC can connect to it. But with my Archos, all I get is the "paired, but not connected" nonsense. No matter what I do. It's the same with my N900 as well. I am starting to think that the Bluetooth module on the Archos is defective. But I don't have any other Bluetooth devices to test it out with.
This thing is almost useless to me without tethering as a possibility.
most phones (including android ones) provides ad-hoc wifi tethering only (via 3rd party software), and archos cannot detect ad hoc wifi network.
henrylim said:
most phones (including android ones) provides ad-hoc wifi tethering only (via 3rd party software), and archos cannot detect ad hoc wifi network.
Click to expand...
Click to collapse
Android does not officially support AdHoc Networks. Once we have root we can make this work easily.
I did a walk through for bluetooth pan with a Droid X: http://forum.archosfans.com/viewtopic.php?f=74&t=43001
I tried the same with my wifes inc and it didn't work.
iPhone 4 and BT Tethering
1. Remove all previous BT pairing between iPhone and Archos 70.
2. Se both BT to active and discoverable.
3. Once you see iPhone under "bluetooth devices" in Archos, get it paired.
4. At this point, you will see that status on Archos is "paired but not connected"
5. In Archos, goto "Cell phone tethering", you should be asked to set up a tethering profile for Bluetooth or USB. Select Bluetooth and a new iPhone PAN profile will be setup.
6. Select checkbox for "Tether"
7. At this point, you will see Archos device in iPhone changed to "Connected", and a blue bar at the top says "Internet Tethering".
Bear in mind if iPhone or Archos goes to sleep, my experience is that the Internet connection is gone, no matter if the connection status remains. Therefore, please do not allow iPhone or Archos to go to sleep while you are using the Internet tethering connection.
Hope this works for you.
cajl said:
i use the same
but for many android phones it is not possible
Click to expand...
Click to collapse
WiFi Tethering has been introduced with Froyo for most phones. Before that you needed root and some app doing it.
WiFi Tethering with my Desire works great, but I wasn't able to setup Bluetooth Tethering between them. Like there are profiles missing to establish a network connection.
Try the Toshiba Bluetooth Stack, there is a 30 day free trial and it give you PAN. I have a HTC Eris and bluetooth tethering is not possible, it crashes the phone.
I have an Espresso running CM 6.1 and WiFi Hotspot works... Will I be able to use it with the Archos 70?
HTC Magic with Cyanogenmod 6.1 and the app 'Wifi Tethering' in bluetooth mode works perfectly.
I thought wifi tethering was going to eat the battery too.
Was able to tether from ~90% to ~10% for over 6 hours continuously on an Evo running cm6.1.1 with the built-in mobile hotspot.
I posted a .apk in post #3 that has worked for all the rooded android phones i have tried.
http://forum.xda-developers.com/showthread.php?t=887018
use mifi or similar product, i use a product from ZTE and work well. better don't use your android phone for wifi thetering, it will drain your phone battery much faster
use you phone to search for "google wireless tether" and download the apk this is free and works great for BT tethering between my 101 and moto droid 1.
henrylim said:
1. Remove all previous BT pairing between iPhone and Archos 70.
2. Se both BT to active and discoverable.
3. Once you see iPhone under "bluetooth devices" in Archos, get it paired.
4. At this point, you will see that status on Archos is "paired but not connected"
5. In Archos, goto "Cell phone tethering", you should be asked to set up a tethering profile for Bluetooth or USB. Select Bluetooth and a new iPhone PAN profile will be setup.
6. Select checkbox for "Tether"
7. At this point, you will see Archos device in iPhone changed to "Connected", and a blue bar at the top says "Internet Tethering".
Bear in mind if iPhone or Archos goes to sleep, my experience is that the Internet connection is gone, no matter if the connection status remains. Therefore, please do not allow iPhone or Archos to go to sleep while you are using the Internet tethering connection.
Hope this works for you.
Click to expand...
Click to collapse
This does not work for us with Sprint. Sprint uses CDMA not GSM. No APN on my Sprint HTC Hero. Tethering works perfectly with my Laptop and my HTC Hero using Bluetooth. NOT with Archos 70 IT.
crc111 said:
This does not work for us with Sprint. Sprint uses CDMA not GSM. No APN on my Sprint HTC Hero. Tethering works perfectly with my Laptop and my HTC Hero using Bluetooth. NOT with Archos 70 IT.
Click to expand...
Click to collapse
Uhh... I'm not having problems tethering with BT, Archos 101 and Sprint (HTC) Hero. Not at all sure what makes you think CDMA vs GSM has to do with this.
2.0.5pre7 wireless tether.
I've found several threads on the subject of Tethering a Xoom via BT and Wifi but I'm not having much luck and there's a lot of confusion about providers/Xoom versions/phones, etc. so rather than tag on to a thread I hope it's ok to start a new one.
I have the following:
Wifi Xoom (NOT the Verizon version, the one that just came out on March 27th here in the US)
HTC Hero GSM - completely unlocked (purchased in Europe). Running Android 2.1 standard update from HTC. I'm using the AT&T data plan but device is not an AT&T device at all.
I would like to see if I can Tether the Xoom to the phone and use the data connection I have on it. I understand that the Xoom's chipset doesn't allow for Ad-hoc networks. I've tried to do a Wifi Tether and although that works from my Laptop to my Phone the Xoom doesn't see the ad-hoc network. I don't believe there is any way for me to make the Wifi Tether work in Infrastructure mode so I don't think there is an option there (unless the Xoom can be modified somehow to see Ad-hoc).
So now I'm trying to use Bluetooth Tethering. I've tried both PdaNet and Wifi Tether (v2.0.7 and phone rooted via SuperOneClick). Both seem to start up fine and are running. I then pair the two devices but as many others have reported, I don't see any Tethering options on the Xoom so I'm stuck.
I've tried different orders of things... run Wifi Tether, pair, vs. pair then Wifi Tether, work with Airplane mode on vs. off, Wifi on vs. off, etc. but I never see that Tether option show up.
Anyone have this working with an HTC Hero GSM by any chance? Note that this is the Wifi-Only Xoom which seems to have different features than the Verizon 3G Xoom. Could it be that the Hero itself doesn't support this profile? Or can the Xoom be modified to force it to think the device is tetherable.
I'm not sure if rooting the Xoom would help any or maybe flashing a custom ROM like CM7 on the Hero would help any. I'd prefer not to have to do this but if someone has this working with my exact configuration I'd give it a try.
Any help would be appreciated.
From what i know, most tethering tech /apps are establishing a ad-hoc network' which the xoom isnt capable of...
I too have the Xoom wifi only version with a HTC rooted CDMA Hero.
As everyone knows now the Ad hoc will not tether with the Xoom infrastructure as of the latest.
I too get full bluetooth tethering signal from Wireless Tether, but like you the Xoom will "pair but not connect". As you, I am confused as to whether it is the Hero or the Xoom Wifi which will not connect to the bluetooth tether.
I suspect it is the Xoom Wifi, but would also like a definitive answer and better yet a viable solution.
I have no issue tethering my Xoom (Wifi model) with my Verizon Motorola Droid (1 Gen) over Bluetooth.
My Droid is full rooted with custom Gingerbread ROM (2.3.3) and Overclocked Kernel from ChevyNo1. His kernels are everything enable such as tethering and VPN. This might be the difference for some.
The one annoying thing is that everytime I enable the hotspot on my Droid, I have to go into the Xoom settings and enable tethering on the connection to my Droid. This also has to be done if either device goes not a range and brought back. I am trying to find a widget or a Tasker script to auto enable this.
Be sure to already start the wifi tether program on your phone (selecting the blutooth option on it) then bring up the blutooth settings menu on your xoom, just press and hold the little wrench you see to the right of your phone icon. it should bring up the tether option...just press that and you should see it conect via blutooth.
Just be sure to have the wifi tether app on your phone already on and set for blutooth. This works for me everytime (running the atrix) and shoujkd also work for your phone too.
Still no luck on my side with the Tethering on while I do the pairing and/or when I touch the wrench icon.
I'd like to understand more about how the Bluetooth profile is detected. Does my phone have to publish out a certain profile? Or does the Xoom have a list of device types that it knows are tetherable? I've read on another forum that it seemed like Motorola devices like the Droid worked whereas HTCs didn't seem to. I'm wondering if the Xoom detects the type of phone it's connecting to and decides whether it's tetherable or not... Anyone know? If this is the case maybe there's some file that can be tweaked on the Xoom to include additional devices or change the phone to broadcast out a different device name, etc. Maybe I should try changing my device name to 'Droid' or something.
Just guessing at this point....
I had the same issue with my droid, bluetooth tether is a pretty good alternative. I made a video of it, works with most phones with that create the Ad-Hoc. Check out video below to see the easy steps involved. Root on phone required.
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
rosso said:
Thanks for posting the video. This is exactly what I tried but does not work with my HTC Hero and my Wifi Xoom. I'm going to see if I rename my Bluetooth device name to 'Droid' to see if that makes any difference. I doubt it....
Click to expand...
Click to collapse
I ran into a little bug, and it wouldn't recognize my droid. I had to unpair and turn on the bluetooth tether app. Then pair. The xoom then recognized the bluetooth tether. Hopefully this works, I apologize if it doesn't.
My wifi Xoom works perfectly paired with a CM7 Nexus One.
App: wireless tether
pd: key is the wrench
I tried renaming the bluetooth device name to 'Droid' but that didn't make a difference. I'm sure I'm following the same steps as in the video. Somehow the Xoom doesn't see the Hero as a Tetherable device...
Maybe there are some differences in Bluetooth chipsets?
Wifi tethering works with the Desire Z or the G2
I assume the network it creates is not an ad-hoc otherwise the xoom wouldn't have recognized it?
It's either not ad-hoc or you're using Bluetooth. You'd have to explicitly choose Bluetooth tethering in the Wireless Tether app so I assume you're using Wifi.
From what I understand some phones (the ones that are meant to be used as wifi hotspots) do broadcast in infrastructure mode rather than ad-hoc so I assume that's why it works for you.
Also of note is that Honeycomb only supports PAN tethering, and not DUN tethering.
Your phone also has to have "bluetooth tethering" turned on (however you do it, I don't have an android phone) so that the Xoom can discover the PAN bluetooth service.
Interesting. Something to read up more on. I'm using Wireless Tether to do the Bluetooth tethering but maybe I need something additional switched on. At least it's another direction to look at....
Seems like someone figured out how to get the Xoom to listen to Ad-hoc networks but that needs the Xoom rooted so I'll also research that. I prefer Bluetooth tethering since it uses less juice on the phone....
It does seem that "Wireless Tether" which is what I'm using on my HTC Hero, is running in PAN mode. If I look at the app's directory it has a pand executable, etc. and when I'm running the tether it is running pand in the process list.
Still, if I pair, even while it's running pand the Xoom still doesn't recognize it as tetherable. Grrr.... Wish I had another bluetooth client I could try to connect to see if it's the phone or the Xoom but I don't have anything else.
I'm wondering if it's because I have the Android 2.1 update for my Hero. Wireless Tether seems to support the 1.5 version of the Hero but doesn't mention 2.1. Maybe there is an incompatibility there...
Anyway, will continue to try to figure it out.
Rosso, your not on your own, I am still trying to figure this out on my hero running froydvillian. I have done the wifi ad hoc mod and thats working for me but BT tethering woudl be better, I will let you know If i ever find a solution.
I did see someone else loaded CM7 for the hero and then BT tether worked, but CM7 seems to have been pulled for the hero at the moment due to stability issues.
I have a droid eris (verizon's cdma hero) and I have the same exact problems but I'm on cm7and using wireless tether. I can get the to devices and connect via tethering but 5 seconds after that my phone reboots.
Just picked up a wifi-Xoom for my wife over the weekend. Tried to get it connected to my phone (HD2) as a wifi hotspot and was having problems (the ad-hoc problem). The xoom wouldn't even see the hotspot. I am running AmeriCanDroid 0413 build and it has wifi tether v. 3.0-pre11. So I switched back to winmo and still nothing, then I tried going to Darkstone SuperRam 1.5 (my fallback build). It has an older version of wifi tether, I think 2.06 or something like that and got the xoom to connect. I haven't had a lot of time to fool around with it, but it was able to get a network connection. Maybe you could try an older version of the wifi tether? I haven't experimented with the BT tethering yet. I don't want to root the xoom yet, maybe when my wife is tired of it.
/edit
Just checked the wifi-tether website and there is a new version of wifi tether and it supports softap which may help the xoom recognize the wifi hotspot.
Hi, I have just managed to get my hero bluetooth tethered to my htc hero.
The process I followed was basically what everyone has said:-
download wireless tether i am using 2.0.7
1. start bluetooth on phone and xoom (make discoverable)
2. Do not pair the devices yet
3. start up wireless tether, select bluetooth and tap to start the actual service
4. go back to bluetooth on your xoom and pair the devices
I then got an icon I had not had before and when I tapped the wrench I got the option to tether.
As for wifi tether your phone needs to put out infrastructure wifi for the xoom to see it, if its ad-hoc, you'll need to do the wifi mod so that he xoom sees adhoc
although as stated the new version of 'wifi tether' (which just seems to be the new name for the 'wireless tether' app) may fix that? but doesn't seem to support bluetooth as the 2.07 version does
hello,
im having problem tethering my gtab connection to phone using bluetooth. pairing works as expected, but when i see on phone, gtab dont have tethering capability in bluetooth
do you guys have same problem?
No, It is the other way around. I've used my GTab tethered over BT from my old WM phone without problem. What phone do you have? Most Samsung Android phones don't have BT PAN service (the service required for BT tethering).
EDIT: are you try to use cell connection from phone or you try to use cell connection from GTab. What I have done is to connect my wi-fi GTab to my phone's 3G connection. Not sure the other way around.
Most HTC phones also do not have it - motorola phones seem to have it (droid X for sure)
foxbat121 said:
No, It is the other way around. I've used my GTab tethered over BT from my old WM phone without problem. What phone do you have? Most Samsung Android phones don't have BT PAN service (the service required for BT tethering).
EDIT: are you try to use cell connection from phone or you try to use cell connection from GTab. What I have done is to connect my wi-fi GTab to my phone's 3G connection. Not sure the other way around.
Click to expand...
Click to collapse
it is the opposite. actually im going to share Gtab wifi connection via bluetooth to other android phone.
I have successfully paired my nexus 7 to my evo 3d and my HP laptop. However, it will not connect to either one. There is no connect option visible either. Both the laptop and my evo 3d connect fine to each other and other Bluetooth devices. Is my nexus 7 faulty or am I missing something?
Edit: ok it connects fine to my Bluetooth headphones, so why won't it connect to my phone or my laptop?
Sent from my Nexus 7 using xda app-developers app
i used foxfi and pdanet to pair my nexus 7 to my sgs3 and tether my nexus 7!, maybe those 2 apps could help
Thank you. That does seem to allow me to tether. But why won't my tablet connect on its own though the Bluetooth setting?
Sent from my Nexus 7 using xda app-developers app
is anyone else having trouble connecting (not pairing) their nexus 7 to a laptop or a phone without using any external apps? Just native settings.
Sent from my PG86100 using Tapatalk
Not sure if this helps, but I have Verizon and it seems that they block Bluetooth tethering while on 4G LTE. I could get my phone and nexus 7 to pair, but wouldn't connect. However when I switches my phone to 3G, my tablet and phone connected no problem. Its nice BC when they are connected your tablet automatically uses your phones internet. If I just want to use 3G, I go this route. When I want to connect them while my phone is on 4G LTE, I have to use foxfi/pdanet.
In other words connecting while the phone is on 4G seems to be blocked. Switch to 3G and see if that doesn't work to connect.
Hope this helps.
Sent from my Nexus 7 using xda app-developers app
hawleyncsu said:
Not sure if this helps, but I have Verizon and it seems that they block Bluetooth tethering while on 4G LTE. I could get my phone and nexus 7 to pair, but wouldn't connect. However when I switches my phone to 3G, my tablet and phone connected no problem. Its nice BC when they are connected your tablet automatically uses your phones internet. If I just want to use 3G, I go this route. When I want to connect them while my phone is on 4G LTE, I have to use foxfi/pdanet.
In other words connecting while the phone is on 4G seems to be blocked. Switch to 3G and see if that doesn't work to connect.
Hope this helps.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I tether 4G with my stock RAZR maxx without a problem. Turn off WiFi on both devices and it will probably work perfectly.
Sent from my Nexus 7 using xda app-developers app
I've paired my Samsung Galaxy S2 with my Nexus 7 and I can't access my phone from the tablet using ES File Explorer, though I can access the tablet from the phone.
--
Sent from my Nexus 7 using Tapatalk 2
Clicking on the other device in bluetooth settings usually gets it to connect for me. If I walk away from my tablet with my phone I have to redo the process.
94SupraTT said:
Clicking on the other device in bluetooth settings usually gets it to connect for me. If I walk away from my tablet with my phone I have to redo the process.
Click to expand...
Click to collapse
This doesn't work for me. The only option I am given is to unpair. I have tried it without WiFi as well. No go.
alsocnv new
awakener777 said:
This doesn't work for me. The only option I am given is to unpair. I have tried it without WiFi as well. No go.
Click to expand...
Click to collapse
I have the same issue as you. It may be that our phone don't have the right BT Profile for "Internet Access".
Are there any other options? I've tried FoxFi and that didn't create the "Internet Access" profile either. I'm on a Samsung Stratosphere with 2.3.
Nexus 7 Xperia X10 Mini
pitchdarkice said:
I have the same issue as you. It may be that our phone don't have the right BT Profile for "Internet Access".
Are there any other options? I've tried FoxFi and that didn't create the "Internet Access" profile either. I'm on a Samsung Stratosphere with 2.3.
Click to expand...
Click to collapse
I have also been trying to tether my new Nexus 7 with my old Xperia X10 mini. I can pair but not connect. I can't access my Bluetooth settings on my Nexus. I can't pass files vie Bump either. I can't get the wifi tether to the phone working either: My phone doesn't allow me to download Foxfi, my phone says PDAnet doesn't work on my version of Android. I bought the Nexus in the UK but I'm using it in Germany. My phone is with O2 which typically requires an additional €20 charge to tether. Any advice would be appreciated.
I think you folks are missing a setting?
Hi
Aside from pairing, on the device whose connection is being shared (i.e the phone), you need to goto settings-->More-->Tethering And Portable Hotspot, and make sure that 'bluetooth tethering' is selected.
This works on my Galaxy Note. 4.04 ICS
No 3rd party apps are required to do this. Note that Bluetooth PAN only came to android in 3.0. If your phone runs 2.3x or below, you'll need the software discussed elsewhere in this thread to make BT tethering work.
Whatever internet connection the phone has is shared, whether wifi or 3g
NB: Its a bit flakey! OK once connected, but requires BT to be cycled off/on on both ends...
Nigel
awakener777 said:
This doesn't work for me. The only option I am given is to unpair. I have tried it without WiFi as well. No go.
Click to expand...
Click to collapse
Mine also "pairs" but won't connect to my Galaxy S3. Also can't get Wifi direct to work between the two (ICS on the S3)
mmarquis said:
Mine also "pairs" but won't connect to my Galaxy S3. Also can't get Wifi direct to work between the two (ICS on the S3)
Click to expand...
Click to collapse
Theres a wee bug in android where after a new pair, restart, or occasionally on bluetooth disconnections bluetooth tethering will become disabled on the host device.
Go to the device with the Internet Connection and (on ICS / JB) hit Settings -> More -> Tethering & portable hotspot -> Bluetooth tething and check it.
You'll have to redo this regularly but combined with an occasional bluetooth off/on unpair / repair this will work.
(Nexus 7 / Galaxy Nexus - both rooted stock)
Hi
If you don't have the screen below (or equiv) mentioned in my previous post, then you wont be able to tether without using 3rd party apps. I guess the BT PAN profile is missing where this option is not available.
veletron said:
Hi
If you don't have the screen below (or equiv) mentioned in my previous post, then you wont be able to tether without using 3rd party apps. I guess the BT PAN profile is missing where this option is not available.
Click to expand...
Click to collapse
I don't have the BT tethering option on my AT&T S3. Guess I'm out of luck.
veletron said:
Hi
Aside from pairing, on the device whose connection is being shared (i.e the phone), you need to goto settings-->More-->Tethering And Portable Hotspot, and make sure that 'bluetooth tethering' is selected.
This works on my Galaxy Note. 4.04 ICS
No 3rd party apps are required to do this. Note that Bluetooth PAN only came to android in 3.0. If your phone runs 2.3x or below, you'll need the software discussed elsewhere in this thread to make BT tethering work.
Whatever internet connection the phone has is shared, whether wifi or 3g
NB: Its a bit flakey! OK once connected, but requires BT to be cycled off/on on both ends...
Nigel
Click to expand...
Click to collapse
Thanks for this. All was working fine between my UK (stock European with a few Vodafone apps) Samsung Galaxy S3 (SIII) and Note 10.1 until I upgraded to 4.1.1 on my S3. It seems this option was added then or disabled by default. All working splendidly now, cheers.
Droid Razr Nexus 7 connection
All,
You can tether the 4G LTE on a nexus 7 you just have to enable bluetooth tetheriing in Setting > Tethering & Mobile Hotspot > Bluetooth tethering
Without doing this, it won't link via bluetooth tethering.As for laptop, you have to allow access point in your laptop in order to allow the Nexus 7 to fully connect to your laptop to share files.
Cheers!
This thread has the most similar problems that I have. By me the problem is opposite. I need to get internet connection on my phone (xperia U) and the only way is through tethering through my iphones hotspot. Bluetooth says paired but not connected and wifi hotspot isn't found in the list of wifi networks.
Bluetooth tethering worked fine on ICS but I downgraded to GB and now nothing. I can't install 3rd party apps yet because no internet on phone.
Is there no other option? Is it either GB, lag free phone but no tethering option or laggy ICS phone with tethering??