Database Users

Will this help to improve MS BT stack on our magician?

Got this from microsoft website, the date is on february 2005, anyone has ever tried? If it works please share with us the result, I'm a newbie and don't have a guts to try this yet :lol:
http://www.microsoft.com/downloads/...09-6401-42f8-998b-55d8baaae7ef&displaylang=en
Windows CE .NET 4.2 Platform Builder Update 050126_KB891190
Bluetooth Component Update
Quick Info
Download Size: 7582 KB - 68679 KB
Date Published: 2/10/2005
Version: KB891190
Overview
Fixes made in this update:
Component: Bluetooth
Description: This update resolves an issue with the SDP stack that may keep the device from connecting to the U-Connect series of hands-free kits.
System Requirements
• Supported Operating Systems: Windows CE .NET
• Windows CE.NET 4.0 Platform Builder
• 21 MB of disk space required to download, install, and operate per processor
________________________________________
Instructions
1. Click the file you want to download from the list below.
2. Click Save this Program to Disk to copy the download to your machine for installation at a later time.
Important download details: Each QFE is contained in a compressed file along with instructions. All of the QFEs have been separated to make the download quicker.
QFEs are cumulative; we suggest that you download all of them. The setup will replace files in your Windows CE Platform Builder installation.
http://www.microsoft.com/downloads/...f0-ed1d-41e8-8f1d-dc0ff84d2881&displaylang=en
Windows CE .NET 4.2 Platform Builder Update 050201_KB892510
Bluetooth Component Update
Quick Info
Download Size: 7485 KB - 67769 KB
Date Published: 2/9/2005
Version: KB892510
Overview
Fixes made in this update:
Component: Bluetooth
Description: The stack may not obey the hardware's limit to a number of data packets pending in the hardware and may stop functioning. When more than one Bluetooth connection is active and one of the connections fails, the "good" connection may get destroyed by the stack and close down.
System Requirements
• Supported Operating Systems: Windows CE .NET
• Windows CE.NET 4.0 Platform Builder
• 21 MB of disk space required to download, install, and operate per processor
________________________________________
Instructions
1. Click the file you want to download from the list below.
2. Click Save this Program to Disk to copy the download to your machine for installation at a later time.
Click to expand...
Click to collapse

Not for most of us. Users.
This update is for programmer.
Hopefully can solve some problem in the future.
Arto.

IDA Pro 5 Demo and WM5 Problems

I have been trying to get the new demo version of IDA to connect to my WM5 Qtek S200 with no luck.
When I click on attach it sends across wince_remote_arm.dll
then I get cannot invoke server.
If I add the reg key in HKLM\Security\Policies\Policies then it will connect and immediatly kill the ActiveSync connection and I have to unplug/replug in the USB cable. It also displays the following message.
irs_recv:An existing connection was forcibly closed by the remote host.
I can however debug .net apps and do the usual active sync transfer files etc.
Anyone have any thoughts on what to try?
Thanks
Pete

I think you have to enable RAPI, there is a cab for it on the forums or on the FTP, search for it, I think it is enable_rapi.cab.

^^ exactly... just run it on the device and it will connect

I have tried the above cab file and unfortunately still no luck.
It still dies when connecting, and the green activesync icon changes to grey and the "irs_recv:An existing connection was forcibly closed by the remote host." messagebox is displayed.
Strangely I can get it to connect to and debug the emulator.
Anyone have any other suggestions.
Thanks
Pete

I use full version of IDA (you can find it on chinese warez sites), ARM debugger extracted from demo version of IDA, cert.SPCS.cab, EnableRapi.cab, and HKLM\Init\RequireCertMods=0.
IDA connects and works.

mamaich said:
I use full version of IDA (you can find it on chinese warez sites), ARM debugger extracted from demo version of IDA, cert.SPCS.cab, EnableRapi.cab, and HKLM\Init\RequireCertMods=0.
IDA connects and works.
Click to expand...
Click to collapse
Uhhmm... which site exactly? And why doesn't it containt the debugger?

i have the same error "irs_recv...." anyone found a solution for it ?

Guybrush said:
i have the same error "irs_recv...." anyone found a solution for it ?
Click to expand...
Click to collapse
Solution is 2 posts upper.

I tried... Installed cert_SPCS.cab, EnableRapi.cab changed registry value but always same message

can you give me your security policies values under
HKLM/Security/Policies/Policies/
Thanks in advance.

I'm trying to run the IDA debugger on a Cingular 8125. It gives me the exact same error.
I have these values in the registry:
HKLM/init/BootVars/RequireCertMod = 0
HKLM/Security/Policies/Policies/00001001 = 1
HKLM/Security/Policies/Policies/00001005 = 40
HKLM/Security/Policies/Policies/00001017 = 144
I've installed EnableRapi.cab and Cert_SPCS.cab, but it still doesn't work.
Has anyone found a solution for this?

Same for me
I did all the same actions but it still doesn't work
Anyone?????

I think the problem is a result of some incompatibility of ida's debugger dll under OMAP 850 cpu...Therefore I use m$ deviceemulator which is VERY slow.

I had problems aswell with my devices... And after this last post.. i tried a WM device without a OMAP 850.. And it worked fine for me... on every OMAP850 device i tried .. i get the same error as you guys have reported..
So I must agree with george that OMAP850 is the problem

sashje, the problem is in IDA debugger's CPU detection routines. I've even reported this to IDA "support" but they paid no attention to my words.

Datarescue
you must download CE Debugger for windows ce if have it you must test another version of it you can download directly from datarescue

accepted, as far as I know even the latest versions of IDA 5 are bundled with an old ARM remote debugger dated from 2005...I bet that presently there is no such working version with OMAP CPU, but I would take my words back if only you could have pointed out the links for the downloads you meant.

if u changed your WM to unofficial WM
if u have any problem with pointers and breakpoints
if u have any connection error
you should test another version of CE Debugger On IDA PRO 5(my current version)
i have this problem with my device(Axim X30)
i changed CE debugger and work truth now
if you want some version of CE debugger i can give u
please use private messages
thanks
regards

accepted, your axim has Intel PXA270 (at 624MHz). We are speaking about Texas Instruments OMAP CPU problems lately here - so your remarks are quite incompetent. There is no version of this arm ida remote debugger dll that can work with OMAP CPU. If you have one (I'm sure you don't) please share it with all of us.

Texas Instruments
oh man i am sorry
i don't read carefully
IDA PRO do not support OMAP and only support ARm version
only support ARM(CE debugger)
sorry again

IDA ARM debuger

Hello!
I try to debug some program on Qtek 8310 with IDA 4.9 Adv+IDA ARM debuger plugin from IDA 5.
My device is sofware unlocked:
1)HKLM\Security\Policies\Policies\00001001 = 2 => 1
2)SDA_Unlock.exe
3)HKLM\init\BootVars\RequireCertMod = 1 => 0
4)HKLM\Security\Policies\Policies\00001005 = 16 => 40 (RAPI)
5)HKLM\Security\Policies\Policies\00001017 = 16 => ??? (CERT)
When I start debuging in IDA, plugin being to run om smartphone, activesync conection go down and ida show message - irs_recv:An existing connection was forcibly closed by the remote host
What I do worth?

Same problem. May be ActiveSync problem? I am using 4.1
BTW, there is already post with same problem: http://forum.xda-developers.com/viewtopic.php?t=48886
I've enabled RAPI, full unlocked - by ActiveSync still crashing (AppName: wcesmgr.exe AppVer: 4.1.4841.0 ModName: wcesmgr.exe
ModVer: 4.1.4841.0 Offset: 00023ed6)

Olostan said:
Same problem. May be ActiveSync problem? I am using 4.1
Click to expand...
Click to collapse
I have activesync 4.0 4.1 and 4.2 - same problem... In device emulator with WM 5.0 Smartphone QVGA works all rights.

here:

Don't work
EnableRAPI.cab don't work on wm5(qtek8310) with error while install (not for this device). I think it is not support wm5.0.

replace gwes.exe

Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?

xda-graphite said:
Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?
Click to expand...
Click to collapse
Sell your Toshiba, and buy a HTC.

xda-graphite said:
Who can assists me replacing the gwes.exe on a Toshiba G500 smartphone?
I was so silly to buy this phone instead of trusting in htc's
No updates available from Toshiba, no helpfull email replies.
Many applications are not working due to gwes.exe error.
Toshiba just replies : no this software and the other asked doesn't run on G500.
So i have to help myself to get the most out of the misery.
On the phone is WM5 with AKU 3.2
Does someone have the files gwes.exe and gwes.exe.0407.mui from another WM5 release and can upload them.
How can i replace them? Due to the fact that gwes is running in the background i can't delete or rename it.
Also the files in the windows dirctory are protected.
Who can help me?
Click to expand...
Click to collapse
Hi,
I don't know what you can do replacing such files, ( I think you must first make a dump of the rom, reconstruct it with the new files and then repack an flash again ) anyway you can try to extract gwes.exe and gwes.exe.0407.mui from the localized emulator on Microsoft web site... search with google for that if you don't have the link, I don't remember it now...
Really hope this help

Do you try to do a hardreset?

Surely you could use pput from ITSUTILS to drop the replacement files in, and then do a soft reset?
As for the files themselves, you'll just have to hope someone sends them to you

a majority of these errors was not caused by gwes.exe itself, i think. if you installed any software recently, uninstall them and try again

Hey guys, thank You for Your help. Never expected this resonance after the first reply
@[email protected]
you can try to extract gwes.exe and gwes.exe.0407.mui from the localized emulator on Microsoft web site...
Click to expand...
Click to collapse
just extracted it from WM5, but complete crash after replace
@THEVK
Do you try to do a hardreset?
Click to expand...
Click to collapse
a few times with no success
@Aquilo
Surely you could use pput from ITSUTILS to drop the replacement files in, and then do a soft reset?
Click to expand...
Click to collapse
just replaced the files with pput, but after soft reset complete crash of the phone.
@dandycheung
a majority of these errors was not caused by gwes.exe itself, i think. if you installed any software recently, uninstall them and try again
Click to expand...
Click to collapse
after a hardreset just installed tomtom -> crash
TomTom 5.21 / 5.20 both worked on my old xda graphite with WM5 but with another AKU version, i think 2.xx (don'T know bc. it's in the cellphone-heaven)
Don't know further, i have no ideas, maybe you guys

sell this and DO NOT buy htc!

gwes.exe is device dependant, so your phone wil never work with another device's version.

gwes.exe is device dependant, so your phone wil never work with another device's version.
Click to expand...
Click to collapse
no. it's device independent, but can have different components.
Also you can't replace it directly.
just extracted it from WM5, but complete crash after replace
Click to expand...
Click to collapse
it contains relocations. Do you fix it?
Also it must be signed.

Maybe this is interesting for someone:
left software button + power on
RUU update!
Waiting USB Connection ......
connecting usb cable
Updating
Receive call + power on
Factory update!
udc_enable
usb connect
Error occured, usbdev ep0 stalled!
and on Windows -> Driver installer -> TFW USB Download DR/V -> no driver found
(1 + power on) or (vol + power on)
PB Update!
Connecting...
INFO: Trying to initialize USB RNDIS...
HostMINIlnit:: !!
Rndis:: initialization: with addr=0
Rndis:: initialization!
Rndis:: Get MAC address yyyy,yyyy,yyyy
Rndis:: initialization: Fail!
ERROR: Failed to initialize Bulverde Rnd is USB Ethernet controller.
ERROR: Failed to detect and initialize Ethernet controller.
usb connection + 1 + battery connect
PB Update!
Connecting...
INFO: Trying to initialize USB RNDIS...
HostMINIlnit:: !!
Rndis:: initialization: with addr=0
Rndis:: initialization!
Rndis:: PDDInit Success!
Rndis:: Get MAC address XXXX,XXXX,XXXX
xxxx -> maybe device specific numbers
.
.
and on Windows -> Driver installer -> Microsoft RNDIS KITL for Intel PXA27x no driver found
.
.
Rndis:: initialization: Fail!
ERROR: Failed to initialize Bulverde Rnd is USB Ethernet controller.
ERROR: Failed to detect and initialize Ethernet controller.
4 + power on
KITL Enable...
Cellphone remains in "Toshiba Startscreen"
* + power on
SDCard update!
.
.
TFW Windows Mobile PDA SW DOwnload!
Initilization T-FLASH Card... SD Card CMD: Card Response timed out: 0x2142Initlization card fail!
Initilization T-FLASH Card... SD Card CMD: Card Response timed out: 0x2142Initlization card fail!
with MiniSD Card in slot:
* + power on
SDCard update!
Sectors per cluster: 32
First FAT Sector: 98
FatSectors: 31
First Dir sector: 160
First Data Sect : 192
Root DIR Entry Count: 512
...Dirctoy listing...
Search root dir fail!
fat search sector: Fail (fat_locate)
Find file fail!
Open file Error
Upgrade Fail!
0 + power on
------------------------
Xloader Version: MDOC4(mcp25) V1.00
Eboot Version: Eboot-1.02-00
(1) Download with USB_RNDIS
(2) Boot from IPL KITL enable
(3) Boot from IPL KITL disable (default)
(4) Test Key Value
(5) Test Memory
(6) Run ULDR. default FALSE
(7) Clean Reboot
(8) Abnormal Reboot
(9) Goto Sleep
----------from oallog------------
-----------------------------
Enter your selection:

This is your bootloader menu. All devices have some version of it.
Though all manufacturers put an option to upgrade in to their devices (just in case and for internal test purposes) few bother actually releasing updates.
There is no way to just replace gwes.exe and have the system working. What you need is a whole new ROM, so unless you can find someone cooking one I guess you are out of luck.

Thanks levenum,
i agree, there is no way just replacing it.
Just spoke to Toshiba support.
I asked for a hardware reset -> he searched and searched -> and told me "on this phone no way to do a hardware reset"
I ask myself WHO is working on toshiba support?
Why couldn't he say: press "0" + power on and then press 7
Does somebody know how to backup the rom e.g. on sd-card.
Flashing from sd card is possible with * + power on, but i don't know the filename the phone is requiring, and dont have one. Maybe after rom-dump the file will be known.
Toshiba also upgrades the G900 modell only by sending it in. There is no rom-update on the net. Maybe if someone tries (and knows) to backup the G900 rom maybe there is a chance to kook to WM6 for the G500.

Toshiba G500 Call outgoing problem
Toshiba G500 Call outgoing problem.But Idid formeted it "Format user partition" system. After have same problem & all incoming call ok.
any 1 will can give me solution for this problem ?

[TUT] OFFICIAL hw6900 NO GSM FIX for some phones

NO GSM FIX FOR SOME PHONES:
CLICK ON LINK
http://forum.xda-developers.com/showthread.php?p=2276981#post2276981
POST #56
I am making this thread so someone can please help us users of a HP hw6900 Series with the "NO GSM" startup message.
I have a HP hw6925, NO GSM, my product was under warranty and I recently sent it in to HP, , it would cost almost $300.00 for a new board, and I had the warranty at that time.
My next attempt to try and fix this issue will be what is posted at the link below.
If anyone out there has any "Sable" Backups, post in this thread, email me at [email protected]
I will post them on rapidshare, and alternate sites for everyone to download.
This is a huge problem. These HP hw6900 are nice phones, most of us still want to be able to use them as a phone, and a "PDA", some of us right now inlcuding myself can only use them as a PDA, or not at all, I will posting links later today, that should get any SABLE from the "Stuck on Bootloader Screen".
I am willing to donate to anyone who is serious about helping us fix this issue if it is possible, without replacing the mainboard of the hw6900, I will also be calling HP, and post the part number here and actual price for the hw6925 board.

"stuck On Bootloader"
If you are stuck on a HP Invent Screen, with G.39, etc.
And you have tried to hard reset and softreset with no luck, this is what you do.
XP Instructions:
1. Download this link http://www.mediafire.com/?3ygfbx0sjdy
2. In the taskbar area in the right hand corner, right click on activesync, bare with me, I'm using Vista and have to remember this, click connections..., you need to uncheck everything click ok or apply...
3. press ctrl-alt-delete, end process wscescomm.exe, (named something like that, end the process.
4. Extract the file you downloaded if needed.
5. Connect your device to the usb port on your computer.
6. Run Uni Exit Bootloader Application. Done
Vista Instructions:
1. Download these 2 links, and extract them if necessary.
http://www.mediafire.com/?3ygfbx0sjdy
http://www.mediafire.com/?9pmjkponfsg
2. Start Device Manager, (Start-Control Panel, Class View[Far Left Corner])
3. Connect HW6900 to USB port, you should now see a Mobile Devices (Next to + sign), Double Click
4. Right-Click on the Device, Click Update Driver Software, Choose let me pick from a list, Uncheck compatible hardware box.
5. Click have disk, Browse to location where USBAS is extracted, choose the wceusbsh.inf file, Double Click.
6. You should see Microsoft USB Sync, if not and it reverts back to the already installed file, and the box rechecks itself, uncheck it, choose microsoft, and choose the latest Microsoft USB Sync to install
GOOD LUCK

My Current hw6925 Status
"NO GSM" When Booting Up
I beleive it has No RadioOS.Nbf & No RadioFS.Nbf & No Imei.
Here is a screenshot of the Asset Viewer on the GSM Tab

Windows Mobile 6, Windows Mobile 6.1 Port
Official Windows Mobile 6/6.1 Port for hw6900 Series
Let's Get started people, Contribute to this thread.
If you have any Full Backup's of any hw6900 series thread post on rapidshare.com or mediafire.com
If you can not let me know by email, I will figure out a way to post them for you.
Again, any programmers willing to help any of us hw6900 Users, Please Help
Let me know the paypal account to deposit to via pm, I will post that information via this thread.
I need official 1.30 Cingular Roms from "Working" Devices.
If you can backup everything, including, RadioOS, RadioFS, CEOS, CEBL,
for those of you with fully working devices, please contribute to this thread.
Everyone please, I am trying not to wake up and see myself as the only one posting in this thread, I'm not the only one that wants this or the only one with problems with their hw6900 Series phone.
Please Contribute

HP HW6925 Repair Costs
Repair Cost $286.48 + Sales Tax.
Payment by Credit Card
Will take 3-5 Days,
I beleive they ship the box to you. (I think)
To much for my blood, May as well get a I-Phone

Hi,
I don't have any problem with my 6915 i have a french rom if you want and if you say me what i do to extract my rom i can upload everything to you
++

Radio Backup
dexxa05 said:
Hi,
I don't have any problem with my 6915 i have a french rom if you want and if you say me what i do to extract my rom i can upload everything to you
++
Click to expand...
Click to collapse
Do you have at least a 1 - 2 gb minisd card?
If so download mtty here
http://buzzdev.net/downloads.php?file=75
If you have Windows Xp, (CTRL-ALT-DEL) end process for wcescomm.exe (something like that).
put 6915 in bootloader mode, connect to usb port, press ctrl-alt-del, make sure activesync process is not running (WCESCOMM.EXE .......)
Start the mtty1.42.exe program
you should see:
USB>
now type
d2s 60000000 800000
If you have any problems please email me or im, [email protected]
Alot of people need this file, if possible, I am willing to even remote desktop connection, if you are unable to extract the radio rom.
Let me know what happens

i'd like to contribute what I can to this project I have an hw6955, when I went into bootloader to try to make a backup of my rom I get an error and it does not complete the process

jambongo said:
i'd like to contribute what I can to this project I have an hw6955, when I went into bootloader to try to make a backup of my rom I get an error and it does not complete the process
Click to expand...
Click to collapse
Do you get a "Cal Cheksum" on your Screen
try backing up your device using awizard tools, posted on here in the somewhere,
full backup including radio, ext rom, etc ........
then post it here
I will begin the Real WM6 Port

here's the message I get:
Code:
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD:Detected one card
SD:ready for transfer OK
d.total_lba=1E4A00
d.block_size=200
d.RCA=E624
d.drv_type=40000000
d.busWidth=1
Total card size=3C940000
Read singal error D3
Read singal error!
SDCARDD2S+,cStoragePlatformType=FF
Some more info that may be useful:
Memory
System ROM Size : 128MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Chip Type : G4
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level :
ROM Date : 08/28/06
ROM Revision : 1.52.00 ENC
Extended ROM Version : N/A
OS Version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 9650
Hardware Driver Version : 0.8.0
Software Driver Version : 4.1.0
Software Version : 1.0.21
Camera API Interface Version : 1.0.7
Camera Information : 1.3 MP 8X Zoom
Bluetooth
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.7.1.7800
Software Version : 1.7.1.7800
Wi-Fi
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.00.00
Software Version : 2.0.53
IP Address : Radio is Off
GSM
Radio Present : Yes
Radio Firmware Version : 1.02.00
Radio Protocol Stack Version : R5G.27.00.05
Radio Bootloader Version : 0.06
Radio File System Version : 0.07
Default Radio GDFS Version : 0.05
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Global Locate
Revision Level : N/A
Driver Version : 2.00
Firmware Version : 4.169.154.0
Software Version : 2.9.0.0

Awizard Tools
http://forum.xda-developers.com/attachment.php?attachmentid=26038&d=1138056282
Download the link above, then, run the program in windows 2000 compatibility mode, choose that by right clicking the file, click on properties, then, compatibility tab, check mark run in
compatibility mode, choose windows 2000, click apply ok, then run the program, choose the option for backup your device, backup everything choose [Y] or [YES] to everything, including radio, os, ext rom, .....
Follow the directions, beleive the device has to be connected to activesync, let me know what happens, any questions email, me,
Anyone else can do the same, lets fix these Sable devices, and start on a WM6 Port,
jambongo said:
here's the message I get:
Code:
SD:Waiting for card insert.........
CMD3 for SD, it's OK, ready to get RCA from response.
SD:Detected one card
SD:ready for transfer OK
d.total_lba=1E4A00
d.block_size=200
d.RCA=E624
d.drv_type=40000000
d.busWidth=1
Total card size=3C940000
Read singal error D3
Read singal error!
SDCARDD2S+,cStoragePlatformType=FF
Some more info that may be useful:
Memory
System ROM Size : 128MB
System RAM Size : 64MB
ROM Is Flash : Yes
Flash Chip Type : G4
Flash Block Size : 256KB
PSM Driver Version : N/A
Version
Product Revision Level :
ROM Date : 08/28/06
ROM Revision : 1.52.00 ENC
Extended ROM Version : N/A
OS Version : Windows CE 5.1
Bootloader Version : G.39
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 9650
Hardware Driver Version : 0.8.0
Software Driver Version : 4.1.0
Software Version : 1.0.21
Camera API Interface Version : 1.0.7
Camera Information : 1.3 MP 8X Zoom
Bluetooth
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.7.1.7800
Software Version : 1.7.1.7800
MAC Address : 00-17-E5-A4-B3-97
Wi-Fi
Radio Present : Yes
Firmware Version :
Hardware Revision :
Driver Version : 1.00.00
Software Version : 2.0.53
IP Address : Radio is Off
MAC Address :
GSM
Radio Present : Yes
Radio Firmware Version : 1.02.00
Radio Protocol Stack Version : R5G.27.00.05
Radio Bootloader Version : 0.06
Radio File System Version : 0.07
Default Radio GDFS Version : 0.05
IMEI Number :
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Global Locate
Revision Level : N/A
Driver Version : 2.00
Firmware Version : 4.169.154.0
Software Version : 2.9.0.0
Click to expand...
Click to collapse

gave the tool a shot, but it gives me this error when it tries to backup the radio:
Code:
ERROR: ITTFFSGetInfo: outbuf==NULL
WARNING: using default 512 bytes for sectorsize
CopyTFFSToFile(0x50000, 0x280000, ROM\sable\sable-Radio.nba)
ERROR: ITReadDisk: outbuf==NULL
besides that no problems generating an OS and a boot.rgu image file

Okay, I'm also using a hw6915 with original german ROM, and I'm interested to get an to help getting WM6 on it.
Where is the problem? So many HTC devices have been got to run WM6. I thought the 69xx has also been built from HTC. Is there such a big difference, or is the "Sable" just a rarely used device so that no one knowing how to do is just doing it?

I am using the hw6915 with english uk original rom.I would like also to see the wm6 on my device..But the problem is that the developers will not fix a version for this device,because they are not interesting for this.We would be lucky if somebody of them had a device like ours and he had the grazy to make a version for this,for his own use,but they have Htc all of them and our mobile is old for their fancy now...Too bad..

any progress on this?

jambongo said:
any progress on this?
Click to expand...
Click to collapse
no progress at all, no one to help, or even a email reply back

my knowledge is limited in this area, but I am more than willing to help, I did provide a partial backup to you about a month or so ago

I'd still love to see a Windows Mobile 6 or 6.1 upgrade. I'm not sure how I could help. Does anyone else know why no one has cooked one up? I'm guessing no one who can owns one of these things.

I have a 6955 and will be doing a backup soon. I will post it as soon as I have it. Lets get things rolling.

This link should help with raw ROM dumps through the bootloader.
http://forum.xda-developers.com/showthread.php?t=325683