So hi there,
im about to flash my HD2.
These are my Bootloader information:
Bootloader
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And these are my Software information:
OS: 5.2.21864 (21864.5.0.81)
ManillaVers 2.5.19202525.0
ROMVers: 1.43.111.2 (70315) GER
ROM date 10/28/09
As i figured out, my SPL Version is correct.
So i will HSPL it (better than SSPL, ya??)
I just want a normal version (not-branded by any provider) in german.
so which rom could be prefered?
another question:
if i send my hd2 for warranty back, has it to be 100% the same rom as before?
or can i just install a carriers rom and remove hspl?
Nyte. said:
So hi there,
im about to flash my HD2.
These are my Bootloader information:
Bootloader
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And these are my Software information:
OS: 5.2.21864 (21864.5.0.81)
ManillaVers 2.5.19202525.0
ROMVers: 1.43.111.2 (70315) GER
ROM date 10/28/09
As i figured out, my SPL Version is correct.
So i will HSPL it (better than SSPL, ya??)
I just want a normal version (not-branded by any provider) in german.
so which rom could be prefered?
another question:
if i send my hd2 for warranty back, has it to be 100% the same rom as before?
or can i just install a carriers rom and remove hspl?
Click to expand...
Click to collapse
you can flash hspl2 1.66 and then i suggest you flash artemis ger v8. if you have to send your device back to htc you can flash it with the 1.48 ger from here. good luck and happy flashing m8!
any pro/con about flashing via usb oder sd card?
Nyte. said:
any pro/con about flashing via usb oder sd card?
Click to expand...
Click to collapse
Before hspl2, flashing the wrong stock rom via sd card would have erased hspl and gotten you stuck on the wrong spl version with no way back and as such was discouraged. I believe with hspl2 this problem has been removed so there's no real difference. Some say sd card is safer as you can't accidentally knock out the usb cable during the flash, or if there's a power failure etc, but I've never had a problem recovering even with a power failure in the middle of a flash.
flashing succeded =)
tx for help
hello,
I need somme help too.. because i've got the same telephone version as you.
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And i can't Use HSPL, HSPL 2 and HSPL_1024_RUN
i' have always the same error code !
djoe069 said:
hello,
I need somme help too.. because i've got the same telephone version as you.
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
And i can't Use HSPL, HSPL 2 and HSPL_1024_RUN
i' have always the same error code !
Click to expand...
Click to collapse
HSPL and HSPL2 should work. Don't use HSPL_1024 as that's only for the US TMo device.
What error message do you get?
hi, pretty sure i am ok here but after some clarification from the experts please.
ok my phone has to go back tomorrow to htc due to overheating issues and i hope i have managed to revert back to stock rom and removed hspl from the phone?
this is the info showing on the tri colour boot screen
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Just in case any of you experts know this is the info at the white htc screen with the rom, radio as well???
R 2.06.51.07
G 15.30.50.07U
D 1.66.76641
Thanks in advance guys.
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
kplonsky said:
My touch screen decided to take a crap on me. Tmobile is sending me a replacement in the mail which should be here in about 5-7 days.
I just need some help returning the phone back to stock. I already removed ChunkyRom using Task29. Then booted the phone to the bootloader to flash the updated Tmobile rom. Now when I boot this is what the screen shows.
PB81120 SS-B3
SPL-2.08 HSPL 8g XE
0x05
CotullaHSPL 0x40
My dad has the same phone (completely stock) and this is what his shows:
pb8 ss-b3
spl-2.10.0000 8g xe
microP(LED) 0x05
MicroP(Touch) 0x40
So I am not sure. I just dont want tmobile to charge my account. Thank you for the advice. I tried to follow some of the posts already on this amazing forum but I wasnt having any luck. I promise I tried to search!
Click to expand...
Click to collapse
Pivo99 said:
Yeh I am having the same exact problem...My screen just stopped working out of no where and now I need to revert back to original rom radio and hspl...anyone got a link or instructions?
Click to expand...
Click to collapse
Download your official stock rom. Extract it to get the nbh file. Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
10507 said:
Rename that nbh to LEOIMG.nbh. Copy it to your SDcard, and flash in bootload mode. This should reverse your HSPL back to spl
Click to expand...
Click to collapse
This is the part where I am confused. I renamed the file to LEOIMG.nbh but I dont have a clue how to flash it when I am in the bootloader mode.
you not seached for the million and 1 posts about how to return to stock???if its copied right, instead of boot loader it will have LEOIMG to install..search to do it right
Well I formatted my SD card to FAT32 and put the LEOIMG.nbn on the sim card. Boot the phone to the bootloader and it doesn't automatically go to the other screen that is needed to flash the phone.
This is all you have to do..
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
fmedrano1977 said:
This is all you have to do:
1. Download HSPL3_PKG, don't ask where, google it!
2. Extract and run as if you were going to flash the HSPL, hit next on first screen, now you get a drop down list, select 2.08.0000 not 2.08.HSPL.
3. Run the program and tarraaaaa.
4. NOw just flash your stock rom the normal way and not from sd since it still didn't work for me after removing HSPL.
Click to expand...
Click to collapse
Here is HSPL3_PKG
Is my HD2 back to stock ?
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
mario_250r said:
Hi, after reading loads of posts on this forum I think I managed to put my phone back to stock as I need to return it to HTC.
I had HSPL with some custom rom.
Here are the details from my phone after removing HSPL and Cusrom ROM:
With volume down:
PB81100HX-BC
SPL-1.42.000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Installed rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
I will appreciate if anyone can tell me if this is a Stock HD2.
Thanks !
Click to expand...
Click to collapse
Yes you are back to stock
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
GutterFaceMobile said:
I finally got mine to read :
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED)
MicroP(TOUCH)
Is this stock for a tmobile HD2 bought in north america?
Click to expand...
Click to collapse
If you have the 3.10 stock ROM then yes that is correct, but if you have the 3.14 stock ROM you need SPL 3.03.0000.
I like the pic for your avatar too by the way.
Help restoring htc hd2 to factory condition after mgldr. Android install
HI, Im new here and im really in need of help restoring my htc hd2 tmobile to factory condition so i can return it for warranty replacement because my screen is not responding at all.
Thanks and more power
This is hat mine shows up.
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
blue_pirate said:
This is what mine shows up
PB81120 HX-B3
SPL-2.10.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x04
Is this already been restored to stock so i can return it for warranty exchange..I updated the rom from TMobile site 3.14 version..
Thanks so much.
Click to expand...
Click to collapse
Yes. All SPL xx.0000 is a stock SPL
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
blue_pirate said:
T-Macgnolia said that if you have 3.14 rom you need SPL 3.03.0000 to make it a stock version, but mine is SPL-2.10.000 and 3.14 rom, if i return it for warranty exchange are they gonna find out that i hacked it and restored it back?
Thanks
Click to expand...
Click to collapse
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
samsamuel said:
Yea I've mentioned this several times, that the tmous 3.14 doesn't seem to update the spl. Its not a problem because it will run happily on spl 2, unlike regular hd2 which will not run 3.14 on anything less than spl 3.03.
Click to expand...
Click to collapse
Thanks so much for the info, im new to HTC HD2 hacking and i really appreciate all the infos and help..
I'm sending my HD2 from TMobile back under warranty to HTC.
I flashed the SPL back along with the software, is this what the boot screen should say?
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
I've flashed 3 different HD2's but never thought to write down the stock info.
Thanks!
Yes this is the correct information for tbe original stock ROM. If you have the official update ROM 3.14.531.1 then you need SPL 2.10.0000.
ok, great, thank you!
yea thats right, now just flash the stock rom via sd card to et spl 2.10
Well I've had my HD2 With different android Rom's for about 1 year now I'd say. Recently I've been having a problem where the touchscreen doesn't work at all. Sometimes it works And I can use it Perfectly. I flashed the original Windows 6.5 Rom that I downloaded from the T-mobile website and I wanted to know if that took off HSPL. I want to return it Back Because I have a warranty and I wanted to know if it was ok to return it now. Please Help.
Why don't you just Volumebuttondown and power on and see if HSPL is gone?
I forgot about that. I just did it and it says
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
0x50
CotullaHSPL
How do I remove HSPL then ?
JDog10 said:
I forgot about that. I just did it and it says
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
0x05
0x50
CotullaHSPL
How do I remove HSPL then ?
Click to expand...
Click to collapse
You need to flash a stock ROM via SD card. This may help, I don't know, or you could also go to MSkip's stickied thread.
By either installing a TMOUS ROM through the sd (rename to LEOIMG.nbh and put on sd then boot) or by using the HSPL package to remove it (install SPL)