Database Users

big problem

so I installed the nandroid rom and my calls where getting messed up. I cant do a hard reset. It will say its done in a second and dose nothing. tried a hard reset in the sd/phone settings and just rebots the phone. So I cleared all the data I could. My calls work now but my vpn password has been ereased and i dont know it. I do have the phone synced up to the pc, disk drives where installed. Now i tried to reinstall the rom and it says usb fail. Tried to use custom RUU and that says usb failed. I tried every thing I could think of and nothing will go through. Please help I have no idea what to do.

How are you exactly trying to reinstall it?
I tend to do all my flashing via bootloader (holding volume down upon start/restart) and have never had an issue.
Give us a step by step guide as to:
A. What are you trying to flash
B. How are you trying to flash it

well im trying to install any rom right now. I have the MDJ_FroYo_Revolution rom right now. I did the MAGLDR and tried it again and dose it in 1 second. In the MDJ file it has DFT android install and that says it cant find the usb, even on the boatloader screen. the boatloader screen dose see the usb. I tried the custom RUU (PDA Phone ROM Update Utility 3.27.4.3) that cant find the usb. Tried this in boatloader to.
Now I do have the phone synced with HTC sync. Windows mobile will not read the phone. But the computer dose find the phone and has it with its drivers. So what do you think i should do.

If you're trying to flash again using a NAND android build you need to hold the power button when turning on to enter the MAGLDR menu, then select usb flash. Connect your usb then run the daf.exe, that will reinstall for you if I understand this is what you're trying to achieve.

Yes that is what im trying to do. The android flasher mode reads the usb but the DFT dose not. It gives me,
Error USB init failed
INFO: \RSPL\RSPL.cpp (723)
Thats what it gives me in any mode I put the Phone in.

fastenhard said:
Yes that is what im trying to do. The android flasher mode reads the usb but the DFT dose not. It gives me,
Error USB init failed
INFO: \RSPL\RSPL.cpp (723)
Thats what it gives me in any mode I put the Phone in.
Click to expand...
Click to collapse
Check the following thread, should solve your problem and have you back on your way to more happy flashing.
http://forum.xda-developers.com/showthread.php?t=895655

usb doesn't work

hey, my sgs+ can't connect to the pc. it allows batterie loading, but connecting via usb doesn't work. i've tried a reset, reinstalling ROM, the usb modes (kies etc.), i've tried another cable and another pc. what shell i do?

what do you want to connect to? for kies i don't know. never used it. otherwise you got to change your usb settings on your phone
btw: this is a development forum... ask somewhere else... the i9000 guys can help you with this too

May be something wrong with your phone usb port, some contacts not work.

First of all, you should tell if you are using a stock rom, other problem uses to be the windows driver, it does a wrong installation or gets corrupted sometimes.
Try reinstalling the driver, or if you are on a non oficial rom, try another one, or an oficial one, but remember to save your efs folder first in that case.

[Q] Can't connect to pc after rooting

Hi guys,
after unocking bootloader and so on, i cannot connect the n4 as a media device. camera (ptp) and debugging works, but not mtp.
already wiped everything
someone can help me?

I had the same problem. Had to remove the Google drivers I installed to get fastboot (do this via device manager, make sure to tick the box to delete the driver files as well else it will just reinstall them)

1.Delete the Device from device manager.
2. Grab the naked drivers in teh dev forum and install them.
3.???
4.Profit

i don't think it's a driver problem, i have the same issue on both w8 and ubuntu

someone else wanna try?

If you turn off USB debugging, media device mode works.
Nexus4, Tapatalk

tyea said:
If you turn off USB debugging, media device mode works.
Nexus4, Tapatalk
Click to expand...
Click to collapse
already tryed, but still doesn't work.
also tryed to relock bootloader, unroot, but nothing.
now i'm switching back to windows7, i'll see if it will work

solved getting rid of windows8 and going back to windows7

PLEASE some help!!

Its been a while since I've been on here.. my friend manage to completely wipe everything off the phone(nexus4), rom, backups ect.. I can still get to recovery (TWRP) the phone turns on but does not go past the boot sreen.. no matter what I do the phone is not recognized when I plug it in, therefore I can't transfer another rom on there to flash.. what are my options here.. TIA

fresh_TD said:
Its been a while since I've been on here.. my friend manage to completely wipe everything off the phone(nexus4), rom, backups ect.. I can still get to recovery (TWRP) the phone turns on but does not go past the boot sreen.. no matter what I do the phone is not recognized when I plug it in, therefore I can't transfer another rom on there to flash.. what are my options here.. TIA
Click to expand...
Click to collapse
if using Windows 8 series disable driver verification signature(google it) and install universal naked driver
if not just install universal naked driver(turn device in twrp mode,put on pc then go to device manager and u will se there something with either adb, or nexus, or google or android on the name with some yellow thing, double click on it,select manual and select search for driver, then u select the folder where u extracted universal naked driver and wait till it installs. then in twrp go to advanced and go adb sideload then u sideload a rom, or just push to device(/data/media/0/somethinghere) and install normaly.

Updating Yotaphone 2 YD201 ME Build

Dear all, I'm new here and just got my yotaphone 2 today, bought it locally from UAE, i beleive that the build ME refers to Middle East, got an android version of 4.4.3 YD201 model.
I thought that YD201 models are OTA updatable versions but seems not
Please can you guide me in a simple way how to update to lollipop? Noting that I've never flashed or done this before
Thank you so much..

https://forum.xda-developers.com/yo...grade-yotaphone-2yd206-running-4-4-4-t3506293
You can follow this guide fully but you don't need to flash HK first, so you just flash RU 5.0.0 firmware directly.

Caferatte89 said:
https://forum.xda-developers.com/yo...grade-yotaphone-2yd206-running-4-4-4-t3506293
You can follow this guide fully but you don't need to flash HK first, so you just flash RU 5.0.0 firmware directly.
Click to expand...
Click to collapse
Thank you so much.. Totally appreciate that.. But I don't know if it really matters as the tools relates to YD206 while I have YD201.. Should I proceed ?

By the tools do you mean YotaphoneFlasher? It works on both 201 and 206 since it's from official.

Thank you again.. OK I'm all set everything is ready but the only thing that's keeping me is drivers installation... Somehow the Google drive coming with the flasher is not being installed. I tried all ways possible, I.e. right click on the INF file and install but I get error message, and also tried to install it from device manager but couldn't. Can you please help with this? Thanks again
Btw I'm using Windows 7

Would you mind to post the srceenshot so I know your problem?
https://www.youtube.com/watch?v=R3wROHMJBDU This is the video of how you install driver

Caferatte89 said:
Would you mind to post the srceenshot so I know your problem?
https://www.youtube.com/watch?v=R3wROHMJBDU This is the video of how you install driver
Click to expand...
Click to collapse
my dear friend, i managed to update the driver, thanks to you, but it seems that when i power off the phone and enter the "downloading " mode on the phone screen then connect it to the computer it seems the phone is not being connected.. i used the flasher chosed option 1 "flash the cellphone" then i get the message "waiting for device" on the flasher..
i had a screenshot just to show that i have done everything i should (i guess) .. i.e. copied the firmware.. etc,,,
mindyou, i think the problem is that when i conncet the phone to usb it goes under other devices/Android which is not being recognized..
you are the best and thank you for your help again and again!

Weird. Do you've already install both drivers and restart your computer?
If yes, how about try to plug another usb port?

I got both ADB and Qualm drivers installed.. but nothing happening! I tried the 3 usb ports already..
I don't know how to solve this.. I think I need to try it on another computer .. maybe it'll work out!

Your driver not properly install. Try reboot pc, enable usb debugging at phone, plug in usb. See if there is any changes at device manager.
There is yellow triangle. So it mean.. Oh.. Oo..
If stilk not ok. Plug out usb from pc. At device manager, unsinstall both yellow triangle. Plug in back usb. So it will detect device and windows trying to install it.

If you have Windows 10 you have to disable signature driver verification, entering in the advanced boot menu of windows. After that the .inf driver will install.

I got the update at last and it's working beautifully smooth I downloaded universal driver from adbdriver.com and it worked perfectly. Thank you all guys for your help and efforts