Database Users

Dead or alive...?? 8-D

Hi!
After playing w/Floyo 2.2.1 and sd mounting(which does not work properly to me)
ive notice root explorer indicates no root access. Ive installed busybox installer and fetched 1.18 after which...:
-no xrecovery access at boot
-locked home screen but trying to unlock it says: Launcher...unexpectedly stopped etc etc..., DSP manager etc etc - neverending loop.
Any chance to bring the brick back to life ??
Please help !

i had this problem as well when i first started.
download PC Companion , click Support Zone, Software Update, Repair phone and follow the instructions.
it will delete all your data(of cos not sd card) and bring it back to android 2.1 default hope this helps.

Yes, I would..but PC Companion or Update Service/Engine state they cannot fetch any software (due to internet access problem), ive turned off router and windows 7 firewall and still nothing..

zsolarewicz said:
Yes, I would..but PC Companion or Update Service/Engine state they cannot fetch any software (due to internet access problem), ive turned off router and windows 7 firewall and still nothing..
Click to expand...
Click to collapse
thats a weird error... i dont know whats the problem, sorry...

redsock said:
thats a weird error... i dont know whats the problem, sorry...
Click to expand...
Click to collapse
it has to be a version of busybox.
when install xrecovery, there is one u should always keep.
maybe when trying JiT, it need a new busybox,
but after that, put back xrecovery-busybox to system/bin.
it should work. (got same problem twice btw)

I have only one solution for you: reflash.. works always XDD
If you cant use the SE update service or PcCompanion, use flashtool from b1nary.. flash it any firmware, at least one that you could install xrecovery to restore or search for updates on SEUS..
Sent from my Sony Ericsson X8 using XDA App

Thanks guys!
Reflashed succesfuly w/russian ftf and now i am back in 2. 2. 1, btw dont know why it shows ver. 0. 11 instead 0. 12. Sd mounting either not workin for sure or reboots. Eg. Sd ready to be removed and reboot. Anybody succeeded to run app2sd on racht's 0.12?
Regards
Zs
Sent from my X8 using XDA App

How to install Android Rom without using a pc?

I'm tryin to install another Android rom but I can't use my pc as it has a virus.
I have got rafdroid rom running at the moment.
I Tryed to install boyppc Android Rom just via my phone. But it said kernel failed . I unrared it it my phone and went though CWM to install it but didn't work .
How can I install a Android rom on my phone without using a pc
Any help would be very greatfull
Iain

iainbp said:
I'm tryin to install another Android rom but I can't use my pc as it has a virus.
Click to expand...
Click to collapse
Then clean it!
If you have a virus it means you haven't had adequate protection and are probably one of these people who simply install something crap like AVG or something which is as much use as a chocolate fire-guard.
Get yourself something like ESET Smart Security and then a secondary malware scanner like Malwarebytes.

Use a PC that is clean. Borrow someone's then when done remove the files if they dont want them on their PC's. Dont tell them that they will never be gone really. LOL

I can't fix my pc as it won't let do anything on it.
Is it possible to put a Rom on a phone without using a pc?

Don't unrar build, leave it in rar. And cwm must be 143/5 for boyppc build. I change builds over xda app because I m to lazy to power on my pc. Use cwm 150

Is their a thread to tell you how to install android without using pc.?
Been tryin to fix the comp but having no luck.
And would like to try a different Rom on my phone

iainbp said:
Is their a thread to tell you how to install android without using pc.?
Been tryin to fix the comp but having no luck.
And would like to try a different Rom on my phone
Click to expand...
Click to collapse
You need to flash a new recovery almost every time you flash a new ROM. there are 3 different size allocations for different size of roms. I had this same problem so I flashed a new recovery, then ROM, then radio and it worked. you must have a PC for this.
Sent from my Desire HD using XDA Premium App

[Q] How to change from W7 to Android

Hi everyon
I own a HTC HD2 which I upgraded to W7, and its pretty awesome, but the fact that I can't activate the App Market and not recieve mms with my carrier its kinda bad to me. So I want to switch to Android, but I have a few question first.
I would be able to use the app market? What are the features that I won't be able to use?
Do I need to go back to the original software and then to Android?
Thankss!

rdanglade said:
Hi everyon
I own a HTC HD2 which I upgraded to W7, and its pretty awesome, but the fact that I can't activate the App Market and not recieve mms with my carrier its kinda bad to me. So I want to switch to Android, but I have a few question first.
I would be able to use the app market? What are the features that I won't be able to use?
Do I need to go back to the original software and then to Android?
Thankss!
Click to expand...
Click to collapse
1. Yes you will be able to use Android market
2. Everything works fine with Android, except for 720p recording

spike15_mk said:
1. Yes you will be able to use Android market
2. Everything works fine with Android, except for 720p recording
Click to expand...
Click to collapse
Thanks for answering so fast!
But I was searching now but I don't find anything to move from WP 7 to Android.

rdanglade said:
Thanks for answering so fast!
But I was searching now but I don't find anything to move from WP 7 to Android.
Click to expand...
Click to collapse
you can simply move to android as following :
- download the HD2 NAND Toolkit from this thread
http://forum.xda-developers.com/showthread.php?t=1090783
then :
1- task 29
2 - install magldr
3 - choose usb flash from magldr and install CWM recovery from the repartitioning option in the program
4 - open recovery from magldr from ad recvery choice
5 - copy ur android rom to ur memory card
6 - choose install zip from sd card from recovery and choose ur rom

you actually have to take out the sd card out insert it into a reader and do a fat32 format in order to remove ALL wp7 files...you just cant wipe ad install android will not work after that you cant do as mido stated in the previous post with the wipe mangldr and all that

Ideos X5 CD-ROM and Read-Only Problem (Little Donate Award)

My U8800 appears as a READ-ONLY CD-ROM drive when it's connected through USB. "The USB Storage Is In Use Screen" is on.But i can't write anything my sdcard or internel card.
Under device manager, it shows up as Android Adapter USB Device
I tried : MIUI , Oxygen , CM7 but same reason
And I use CWM 4
What can i do about this ?
If someone tells me how to solve this problem, I will donate him $10
Thanks Everbody

Read only CD-Rom
yugey said:
My U8800 appears as a READ-ONLY CD-ROM drive when it's connected through USB. "The USB Storage Is In Use Screen" is on.But i can't write anything my sdcard or internel card.
Under device manager, it shows up as Android Adapter USB Device
I tried : MIUI , Oxygen , CM7 but same reason
What can i do about this ?
Sorry for my bad english
Thanks Everbody
Click to expand...
Click to collapse
Hi there. This is my first reply to a problem. I think i have it figured out.
Check this:
Menu -> Settings -> Applications -> Development:
On this screen make sure USB debugging is unchecked.
When you plug the phone into your computer, then a dialog should pop up on your phone asking you to enable USB storage mode. Tap "Turn on USB storage".
It may ask you to confirm. Tap "OK".
Good luck. I hope that helps you.

deofavente said:
Hi there. This is my first reply to a problem. I think i have it figured out.
Check this:
Menu -> Settings -> Applications -> Development:
On this screen make sure USB debugging is unchecked.
When you plug the phone into your computer, then a dialog should pop up on your phone asking you to enable USB storage mode. Tap "Turn on USB storage".
It may ask you to confirm. Tap "OK".
Good luck. I hope that helps you.
Click to expand...
Click to collapse
I tried this, the same thing happens again, but thanks anyway

deofavente said:
Hi there. This is my first reply to a problem. I think i have it figured out.
Check this:
Menu -> Settings -> Applications -> Development:
On this screen make sure USB debugging is unchecked.
When you plug the phone into your computer, then a dialog should pop up on your phone asking you to enable USB storage mode. Tap "Turn on USB storage".
It may ask you to confirm. Tap "OK".
Good luck. I hope that helps you.
Click to expand...
Click to collapse
It's very much difficult than that. Well the only way to restore your usb problem is going back to stock and after that you only can install a 2.2 custom rom, after you switch to 2.3 your problem will appear again! If you go to "device manager" on windows when U use 2.2, U see that the phone is corrected installed, but when u connect with 2.3 rom, the device it's not corrected installed and therefore only mounted as CD-ROM... I know that, 'cause I have the same problem and tried all this options. I installed usb drivers that huaei give us on their site, but the problem persists. I tried with both CWM recoveries and both work good on 2.2, stock or custom, but not on 2.3....
Last but not least, go check your imei on system, almost sure U got a 0 on that too, as me. So this is some problem with 2.3 roms that "f*cked up" our phone. Altough usb problem is reversible when installed stock rom, the problem with the imei persists after a stock rom install...
Hope it help some people somehow!
(sorry for bad bad english)

Try uninstalling device drivers, then reinsert the phone and let it install.
What do you see on the CD rom? The sdcard contents?

Hello if you are with cm7, go to definitions - about phone and project menu. Testes other options for usb.
Sent from my U8800 using XDA App

Blefish said:
Try uninstalling device drivers, then reinsert the phone and let it install.
What do you see on the CD rom? The sdcard contents?
Click to expand...
Click to collapse
I uninstalled my android device's drivers but when i plug the u8800 on my pc , my pc automatically install driver
Yes i see my sdcard in the cdrom.

nrdl said:
Hello if you are with cm7, go to definitions - about phone and project menu. Testes other options for usb.
Sent from my U8800 using XDA App
Click to expand...
Click to collapse
I'm tested other options
Now I see My Working R/W SDCARD and CD-ROM Device.
Where is Internal Storage ?

I have the same issue now, seems to be the problem with CM7.

Blefish said:
I have the same issue now, seems to be the problem with CM7.
Click to expand...
Click to collapse
Did U read what I say? It's common to all 2.3 roms, i never used cm7 and have the same problem
yugey said:
I'm tested other options
Now I see My Working R/W SDCARD and CD-ROM Device.
Where is Internal Storage ?
Click to expand...
Click to collapse
Did U check your IMEI? Please confirm that, 'cause If U have IMEI=0 and usb problem as me or other guy I know, maybe the problems are related to each other, and forget easy options, i tried almost everything, almost sure that when install 2.3 roms. it changes some values and the phone goes nuts, 'cause if you use 2.2 it works correctly as a normal usb device!

Snake_boss, same here...
Imei 0
Cd-rom when usb connecting
When turning wifi on i get system boot and after this i get ERROR message
Tested with cm7, oxygen and miui
Everything works perfect with stock rom or Flb (the one I user now)
Sent from my U8800 using XDA App

snake_boss said:
Did U read what I say? It's common to all 2.3 roms, i never used cm7 and have the same problem
Did U check your IMEI? Please confirm that, 'cause If U have IMEI=0 and usb problem as me or other guy I know, maybe the problems are related to each other, and forget easy options, i tried almost everything, almost sure that when install 2.3 roms. it changes some values and the phone goes nuts, 'cause if you use 2.2 it works correctly as a normal usb device!
Click to expand...
Click to collapse
My IMEI number isn't 0 , my IMEI number is true.

snake_boss said:
Did U read what I say? It's common to all 2.3 roms, i never used cm7 and have the same problem.
Click to expand...
Click to collapse
I did, but it worked in Oxygen and MIUI. I bet they're all using genokolars github device, which might be buggy.
Sent from my IDEOS X5 using Tapatalk

yugey said:
I'm tested other options
Now I see My Working R/W SDCARD and CD-ROM Device.
Where is Internal Storage ?
Click to expand...
Click to collapse
Blefish said:
I did, but it worked in Oxygen and MIUI. I bet they're all using genokolars github device, which might be buggy.
Sent from my IDEOS X5 using Tapatalk
Click to expand...
Click to collapse
mine only works with 2.2, every 2.3 have the problem to me!

I know this is an old topic, but I have the same problem: USB shows up as a CD Drive and IMEI is 0. Does anybody know a fix for this?

[Q] My Android OS is not fucntioning.

I am running on MIUI Android 2.3.9 and it is a mess, it kept popping up error messages "Google framework" and i dont have any google services, such as Play Store, Gmail, and i cant receive SMS, and my bluetooth also not functioning, and cannot delete anything from the SD card from the phone, i have to take out the SD card and plug it in into a computer just to delete music,video and pictures.
Was hoping to change for a new OS, but the problem is my usb port is also not functioning. I even have to charge my battery using a third party charger.
Is there anyway i could change my OS with using the usb port. Can i use the SD card instead to do all the works.
And if can, what OS should i get and how.
Dear good Sir, PLEASE HELP, im a complete NOOB. I know nothing about phones and how to mod it. The one who helped my change my phone from Windows to Android is a phone shop, that now doesnt do it anymore.

Search for clk 1.5 This can be installed from the sdcard and will also Install a version of recovery.From the clk menu you can partition your nand to the required size for your chosen ROM. Read carefully and you will be fine.
http://forum.xda-developers.com/showthread.php?p=20519266
There you go. .
Sent from my NexusHD2 using xda premium

If you mean change ROM, then you can do what Shanman posted. If you mean actually change OS from android to Windows Mobile 6.5 (a stock ROM), you'll have to flash a LEOIMG.nbh in the boot loader (Google how to do this). If you want to flash Windows Phone then I'm afraid I don't think there's any way to do that.
Sent from my Nexus 4

shanman-2 said:
Search for clk 1.5 This can be installed from the sdcard and will also Install a version of recovery.From the clk menu you can partition your nand to the required size for your chosen ROM. Read carefully and you will be fine.
http://forum.xda-developers.com/showthread.php?p=20519266
There you go. .
Sent from my NexusHD2 using xda premium
Click to expand...
Click to collapse
Thank you dear sir. I think that'll help. Thank you so much.