Database Users

My phone don´t turn on! Please help me! T.t

PLEASE HELP ME!
I WAS TRYING MODIFY JPA ROM, I DELETED SOME APPS (MAPS, WIDGETS...) AND I TRIED TO INSTALL IT. I ENTERED IN DOWNLOAD MODE AND INSTALLED IT BUT ODIN SAYS ME: Big partition size!! AND IT NOT CHARGE, AND I DISCONNECT THE BATTERY FOR INSTALL THE NORMAL ROM, BUT MY PHONE NOW DON´T TURN ON! I CAN´T ENTER IN DOWNLOAD MODE, IN RECOVERY....
PLEASE HELP ME! T.T

I'm sorry to say but your phone is permanently bricked.
Sent from my Samsung Galaxy 3 FROYO

U are following me dude
The same thing happened to me too
I tried to change boot logo and got stuck
no powr on or download mode
Finally gave to service center and told them dat it just hanged and got powered off itself..
I got my mobile with new motherboard in a week..
It was the last option try it...

akss009 said:
U are following me dude
The same thing happened to me too
I tried to change boot logo and got stuck
no powr on or download mode
Finally gave to service center and told them dat it just hanged and got powered off itself..
I got my mobile with new motherboard in a week..
It was the last option try it...
Click to expand...
Click to collapse
Did they charge you anything for that??

Eyyy.. Fersago.. Didja get your fone fixed??
I've Bricked My G3 too!!!
Gave it to the Service Center... Dunno whether they are gonna fix it or not..
They've asked me to get it after 10 days.. So I'm hoping they fix it!!
My warranty period is still good, so will they charge me anything for fixing my fone??
..and what should I do to prevent BRICKING my fone in future while flashing my fone??

help samsung gt-i5800 dead

hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?

manuel80 said:
hello guys .. I need help .. Today I turned on the phone so everything is ok, I get the request from the pin and when I enter the phone freezes. then I open it I remove the battery and reinsert the one is no longer on ... the phone is almost dead! You have no idea what might have happened and if you how to solve it?
Click to expand...
Click to collapse
Try flashing. Look at the link in my sig.

Its nothing big
The same happened to me. I then searched the net and found this wonderful site. I flashed the original rom, then got bolder and started flashing froyo roms and am now happily flashing custom roms ! I can say I enjoy my phone more now!!. Flash your phone too!!

thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??

manuel80 said:
thanks for the advice guys ... the problem that when I connect to the pc I can not turn it on and then the computer does not recognize me ... then how do I flash the rom nn me if the computer recognizes it??
Click to expand...
Click to collapse
You can try to factory reset it... Follow the following
Press Vol Up + Vol Down Key (Press in middle so that both are pressed)
Press Home Key
Now Press Power
GT I5801 logo will appear
Leave the keys and your phone will boot into recovery
Try wiping cache first and if not working factory reset it
If after this it doesnt work, Install Kies...It will install drivers
Follow the above steps except press vol down key instead of both
Phone will go into download mode.... Plug in USB and flash it

hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!

Just flash your phone with new rom. For this use Odin and OPS file and rom .
Boot into download mode of gt-5800 by using vol - , power and home button all at a time. Then you can flash new firmware from Odin , use one package or other option specific to rom and your phone will start working again. Hope this helps.
Post any problem while flashing.

manuel80 said:
hello guys ... I then tried the key combination .. but nothing to do., or any sign of life .... other ideas ... damn it bothers me back for assistance!
Click to expand...
Click to collapse
Did the phone hung during upgrade process or Kies hung during download process?
If phone hung during upgrade process and now you cannot boot that means your phone is hard bricked. This is because when you upgrade the phone through kies, it updates the boot loader and when phone hung during the process means bootloader is corrupted. In this scenario, you need to take the phone to service center and get hardware replaced

then I guess I'll have to bring your cell phone service ... damn ..
Grazzi guys for the help anyway .. I just know you know the developments of the case ..
hello

have you ever tried anything like flashing before? if not take it to samsung service centre and say it is not switching on.

PLZZ Help M boot Logo/Fail Flash Cyanogenmod rom

Hello. Well to start off I had recently rooted my Droid2 which was running the OTA GB. So I started looking for roms like I use to with froyo and the leaked GB. Was looking for something to change the battery life frame poor to great. Anyway I came upon Cyanogenmod's Rom for Droid 2 For the ota gb. I made a nandroid back up, downloaded it and was ready to flash. Seconds away in boot recovery and while i was looking for the file before I think I hit "apply update" instead of "search for zip file on scdard(or what ever sentence it says) and i got it but it started loading an update. I was like wtf kinda freaked out and I did a battery pull . Now my phone stays at the M boot logo and i have no way to go back. I heard the SBF for GB ota isnt her yet . if anyone can help I would be grateful. Plz Help
Things I've tried/
1.Battery Pull.
2.Hold power button + hold X(doesnt work like froyo Poo)
3.Tried going back with rsdlite 5.3.1 with moto drivers(it won't show my device ;'( )
4.Left this message on xdadev / please help

SOLVEd
{[SOLVED]}
Used bootloader way in by holding power button and up. rsd that way and got it to work.. Guess this is to who ever made my mistake . heres the solution

T3viin said:
{[SOLVED]}
Used bootloader way in by holding power button and up. rsd that way and got it to work.. Guess this is to who ever made my mistake . heres the solution
Click to expand...
Click to collapse
I just tried this on my friend's D2 (I am very experienced with the inc), and I seem to be having the same problem. I have tried Sbfing, but RSDlite will not recognize the phone. I have booted to recovery, nothing (Stock recovery), and the bootloader (Says too little charge)
What can I do?

Charge your battery in another phone like yours. Borrow someones spare battery. Take battery to verizon store and see if they can charge it somehow. There is a thread on here somewhere on how to do a hack job on your cable and hook the wires directly to your battery and charge it independent of the phone. I can't post a link so I hope you can find it by searching.
Sent from my DROID2 using XDA App

dmeadows013 said:
I just tried this on my friend's D2 (I am very experienced with the inc), and I seem to be having the same problem. I have tried Sbfing, but RSDlite will not recognize the phone. I have booted to recovery, nothing (Stock recovery), and the bootloader (Says too little charge)
What can I do?
Click to expand...
Click to collapse
I've had this problem 4 times in the last week. I used a terminal based OS to SBF using ADB.
And in the same step I re rooted my phone. Whole thing takes about 15-20 minutes.
The steps are on the CMWiki.

[Q] Stuck on logo

Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy

wahoby said:
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
Click to expand...
Click to collapse
litle bit same problem with me, my phone stuck on cyanogen 9 logo, but no bootmenu is showing.

wahoby said:
Please help me !
today i tried the new ROM (Argen3Stone Defy_By_UserDJ ) after that the camera didn't work so i tried to go back to my original Rom ( CM9-NIGHTLY-120402-Defy ) by using the Restore from the Recovery ( as i have done it a million times) but not after the restoring was finished the device is stuck on the GOOGLE logo..i can't go to the boot menu , i can't do anything..even the blue light isn't showing when the device starts..just as soon as i start the device it shows the ( Google logo ) and stays like that...i even left if for 2 hrs hoping for something to happen...but nothing..when i connect it to the pc..nothing changes and not even a notification on my pc ! i took off the battery for 1 hr,,nothing changed
Please help me ,, my phone isn't working at ALL..no boot menu..no recovery menu nothing..i tried to press the voulme up + the power..nothing happens
what do i do now ??!
My phone is Defy and it was running perfectly on the CM9-NIGHTLY-120402-Defy
Click to expand...
Click to collapse
You post is too large(in terms of fonts) to read...it hurt my eyes!!
anyways, about the issue, I guess your phone's battery in not charged. Please make sure to charge the battery using the charger and once it done then boot your phone and when you see blue LED blinking press both volume keys together... this will make your phone to boot into boot menu....now do a data/cache wipe and reboot....
However, if this does not helps then you will be required to flash with the SBF. refer to Defy Developement section - http://forum.xda-developers.com/showthread.php?t=966537.
Hope this helps!!

Rajneeshgadge17 said:
You post is too large(in terms of fonts) to read...it hurt my eyes!!
anyways, about the issue, I guess your phone's battery in not charged. Please make sure to charge the battery using the charger and once it done then boot your phone and when you see blue LED blinking press both volume keys together... this will make your phone to boot into boot menu....now do a data/cache wipe and reboot....
However, if this does not helps then you will be required to flash with the SBF. refer to Defy Developement section - http://forum.xda-developers.com/showthread.php?t=966537.
Hope this helps!!
Click to expand...
Click to collapse
I was just about to say this myself! ^^. Perfect reply. Thread ended
CM7 + CM9 double boot

my friend the problem is that you cant make nandroid buckup of this rom

thank u all for the quick response..and i am sorry for the fonts
as for the problem,,the battery was fully charged and after the problem i left the phone on the charger for over 8 hrs...and for my friend who suggested to use the boot menu during the blue light..the problem is there is NO blue light or any light,,just as soon as i start the device it shows the Google logo and thats it..no light flashing..no options to do anything. if i can go to boot menu or the recovery menu then i can solve the problem..but i am unable to do anything..so i tried using RSDlite to install an SBF file..but the program isn't able to locate my device..
so right now my device isn't able to go into any boot menu ..nor the RSDlite is able to fix it !!!!

wahoby said:
thank u all for the quick response..and i am sorry for the fonts
as for the problem,,the battery was fully charged and after the problem i left the phone on the charger for over 8 hrs...and for my friend who suggested to use the boot menu during the blue light..the problem is there is NO blue light or any light,,just as soon as i start the device it shows the Google logo and thats it..no light flashing..no options to do anything. if i can go to boot menu or the recovery menu then i can solve the problem..but i am unable to do anything..so i tried using RSDlite to install an SBF file..but the program isn't able to locate my device..
so right now my device isn't able to go into any boot menu ..nor the RSDlite is able to fix it !!!!
Click to expand...
Click to collapse
I'm sure you are are able to boot into the boot loader.
Follow below mentioned steps:
To Flash full SBFs, here is the standard procedure:
1. Open RSD Lite: Click on [ … ] Button and select your .SBF (Remember to rename to a short name and put it on root of your PC) and click Open.
2. Boot your phone into Bootloader Mode (check last section if you don’t know how to do it).
3. Now connect your Defy to your PC
4. The START button on RSD Lite should be available now, click and wait.
Click to expand...
Click to collapse
Fore more info refer to the below mentioned link:
http://forum.xda-developers.com/showthread.php?t=1216982
Use any Froyo SBF or Fixed SBF.
Good Luck!!
---------- Post added at 05:00 AM ---------- Previous post was at 04:54 AM ----------
crakeron said:
I was just about to say this myself! ^^. Perfect reply. Thread ended
CM7 + CM9 double boot
Click to expand...
Click to collapse
Thanks for the compliment lol

my dear friend...i don't know what to say..ur really trying to help me and i want to thank u for all ur efforts..but the RSD isn't able to detect my phone..i have used it b4 and i know how it works..but when i connect the phone to the pc nothing happens..not even a voice notification that a device has been connected..therefore the RSD isn't able to start to fix the phone..i've tried holding the vol up + power but nothing..also both vol +power also nothing..just as soon as i connect the device to the pc or the charger it instantly shows the Google logo and thats it! nothing else happens

Same issue, can't use RSD if you can't first get to the bootloader. Read a thread about using a stripped USB cable to hotwire the battery to get power to flash with RSD, but can't figure out how to link in mobile app.
Sent from my beastly Galaxy S 2.

Here http://forum.xda-developers.com/showthread.php?t=892026
Sent from my beastly Galaxy S 2.

lg mobile support tool stuck at 49%

i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.

LG G2 Stuck @ 49%
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00

try with x86
El Killer said:
i tried going back to stock firmware using the method in general section but i always seem to get an error at 49%. can someone explain how to get passed this.
i using the t-mobile d801.
also my recovery seemed to have gotten erased because i cant boot into twrp anymore.
Click to expand...
Click to collapse
i had exact same issue that progress stucked on 49%. if you are using 64bit OS, try to flash it with 32bit(x86) OS
good luck

tinydynamite00 said:
HEY! I'm on the d801 as well and I've been where you're at a number of times, unfortunately. But I've always gotten out. Here's the conclusion I've reached. Trying to flash directly back to stock without wiping all the partitions first is what makes the RDTool get stuck. It's like the phone runs out of memory and can't host a full Gig+ of data since your last ROM is in the way. Sorry if I'm wrong but I'm only assuming you didn't wipe everything except the Internal storage. The good thing every time this has happened to me is that your recovery partition should be intact. Mine always is, and we're on the same variant. Another thing, booting back into recovery is not impossible. It's all in the timing it takes from the first time you see the LG logo while holding volume - and the power button, but don't let go. What worked for me was to let the phone cycle between off and boot power states twice until the phone is completely off again. You may even notice the LED indicator flash red. Release your keys if the phone stays off and immediately hold the combo down again until the phone tries to boot again just don't let go of the buttons. Once it powers down again, leave the phone alone for a few minutes. Come back and this time get ready to boot into recovery. The combo button press will initiate boot but don't let go until the next time you see the LG logo flash, then quickly release and depress the vol down power up combo and hold. May take a minute longer than usual but the reset menu should pop up thereafter. Tap power 2 more times and you should back into recovery. It's worked every time for me. Let me know if you're good and whether this helped!
Good Luck,
tinydynamite00
Click to expand...
Click to collapse
still no luck

El Killer said:
still no luck
Click to expand...
Click to collapse
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00

tinydynamite00 said:
OK. So tell me, what ROM were you on, which recovery version and name are you using, why were you flashing back to stock, i.e. were you having problems, what kind. Explain as much as you can in detail. Need to retrace your exact steps to best get you fixed up!
tinydynamite00
Click to expand...
Click to collapse
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots

El Killer said:
i was using pa4.0 and wanted to go back to stock because i preffered the lg ui. i had twrp 2.6.3.5 i restored my back up of stock but when i rebooted i got into fastboot mode.
twrp wasnt working after i had restored my back up go straight to fastboot was stuck in fastboot until i found a thread explaining how to get out of fastboot and restore download mode.
managed to get download mode working and tried to flash stock with mobile support tool and got the 49 percent error,
my phone never really displayed any progress just says download mode with a white box and blue dots
Click to expand...
Click to collapse
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!

Please READ CAREFULLY
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
Esteef said:
Okay, after 12+ hours of trying every method possible on XDA I finally resolved my issue. I will update the first post just incase any others care or fall into the same dilemma I was in.
The LG Mobile Support tool would not download the firmware and it would NOT ask me for my IMEI to download it either.
So my solution....
***
Installed LG Mobile Support Tool then Installed the LG Drivers. (FROM HERE http://forum.xda-developers.com/showthread.php?t=2471370
BEFORE I connected the phone to the computer. I opened the LG Mobile support tool clicked (Options on the top right).
When the dropped down opened, I clicked the (Upgrade Recovery) option. THEN, is when the prompt opened to ask me what my IMEI is.
Before I entered my IMEI, I connected my phone to the computer in download mode, then proceeded to enter my IMEI and hit OK.
This is when the LG Mobile Support tool SUCCESSFULLY downloaded the latest official LG firmware and installed it.
*** BE AWARE, with the phone connected to the PC, the prompt NEVER appeared to enter my IMEI.
*** But with the phone disconnected, the prompt came up every time. This might be the trick for some people.
*** with the IMEI prompt opened, I then connected the phone , entered the IMEI, then hit OK. BOOM HERPES....
Well I'll polish this up more later. I hope this works for every LG G2 Variant and not just the T-Mobile one (D801)
-Esteef
Click to expand...
Click to collapse
THIS WILL WIPE YOUR PHONE COMPLETELY...

tinydynamite00 said:
K, now if you're only seeing the blue dots when you attach by USB your phone to PC, then you're not fully in DL mode to process the kdz. You should see a white wheel in the center of the screen when you connect and a viewing mirror near the base of your phone with ROOTED in red directly below that. And you're sure your PC is detecting your phone? You've the drivers installed? Because when RDT tells you to run the tool, you'll see some binary code in the viewing window I spoke of, the white wheel will turn and below it will be shown the COM port to which you're connected and a solid thin red bar will begin to fill a space in the viewer showing you the progress.
Also, be sure when attempting the first steps I gave you to boot into recovery that you are not USB connected. It won't work.
And, try to remember if your phone was well enough charged, should have been at least 80% full. It happened to me once that I couldn't boot recovery and my phone would go to fastboot like yours until I left it alone to charge and then I repeated the stepsvi laid out to get back into recovery. This part is paramount!
Click to expand...
Click to collapse
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens

El Killer said:
yeah my computer does recognize my phone. but i cant run adb or fastboot anymore. all drivers are installed also.
i never got the while wheel or any progress indicator. so i guees im not really in download mode.
i let my phone charge for a few hours and try your method again and let you know what happens
Click to expand...
Click to collapse
Sounds good. A full charge can make all the difference. I learnt the hard way! One or more of us will be along should you need further help.
I do hope you get this sorted! I've come back from the brink too many times to not believe you won't.
tinydynamite00

Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app

Falaco147 said:
Do as esteef recommended..
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
im trying but i get a battery to low error. i guess i need to charge it longer

i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support

El Killer said:
i owe you all a million thanks for helping me unbrick my phone. i really thought i was left with a paper weight and then i tried esteefs method again i really owe you guys thank you for the support
Click to expand...
Click to collapse
You are welcome... The first time I did it too my battery was at 28% and I panicked since I got the low battery error.
I could of sworn that my phone officially became a paper weight. My heart dropped.
I'm glad you are up and running with the rest of us!
-Esteef

1732359994
hey !
I have the same problem, but... I can't acces to the recovery :/ i tried to install CWM (with Freegee) over Team win recovery and... boot loop :
The rom 4.2.2 flex was gone, no boot animation
-When i pres volum down + power, i have the reset menu, but after that, there is a black screen and it's written at the top left "started usb_start Fastboot Mode ()"
Please, i need your help, i'm so afraid !!
Thx !

Esteef said:
I used to be in your same situation. I thought I had bricked my phone for good. I finally figured it out. Here is my solution from my Thread.
THIS WILL WIPE YOUR PHONE COMPLETELY...
Click to expand...
Click to collapse
I know this thread is a bit old, but it saved my butt. Your method worked perfectly. Thank you for this post.

My LG F460 was bricked (error 570), only download mode was working. Esteef method works fine even my pictures and programs was saved. Thanks!