my friend has a u8800 pro phone. when i saw the phone, i guessed that it was a regular u8800. because in Turkey there is not any u8800pro available yet. one of chineese friend of my friend gave him a u8800pro as gift. it was 2.2 froyo and i tried to install offiicial b526 regular u8800 rom. it was successfully installed but wifi and bluetooth are not working because of the missing drivers. he tried to install official ics rom for pro version but he couldnt passed the step two. and also he tried to install official 2.3.5 and the same condition occured again. now the phone is running with u8800 b526 rom.
does anybody has advice for install official roms to u8800pro?
Install Official GB For U8800Pro Then Install ICS.
if you missing wifi ant BT, then you flashed wrong version (non pro), or your phone is non pro, and you flashed pro firmware
as i said before, also he tried to install official gb but he has not succeed. he didnt passed the step two installation
U Said He Tried To Install ICS Not GB. Install Official GB Then Install ICS.
please read carefully, "he tried to install official ics rom for pro version but he couldnt passed the step two. and also he tried to install official 2.3.5 and the same condition occured again"
it means, yes he tried to install offcial gb. but not succeed with the normal installation method
He shall try to install official GB with USB charger pluged in without battery.
I'm curious: what difference does this make?
Sent from my U8800Pro using Tapatalk 2
salagil said:
please read carefully, "he tried to install official ics rom for pro version but he couldnt passed the step two. and also he tried to install official 2.3.5 and the same condition occured again"
it means, yes he tried to install offcial gb. but not succeed with the normal installation method
Click to expand...
Click to collapse
Flash only step2 from 2.3.5
dolfius said:
I'm curious: what difference does this make?
Sent from my U8800Pro using Tapatalk 2
Click to expand...
Click to collapse
I dont know what exaclty difference is but for me it worked well.
I was unable to install any official rom it just hanged up in the middle.
Only install without battery helped.
Moved To Q&A
Please post in the correct section
i cannot install any official rom. when i try to install official gb roms, only pink screen opens. i tried all custom roms but affter opening the rom, it freezes in about 15 seconds and all battery drained in few minutes.
please help...
See this thread:
http://forum.xda-developers.com/showthread.php?t=1748596
especially latest post and the other from the link there.
Maybe this solution can help you too.
dancer_69 said:
See this thread:
http://forum.xda-developers.com/showthread.php?t=1748596
especially latest post and the other from the link there.
Maybe this solution can help you too.
Click to expand...
Click to collapse
now i tried and soft bricked:crying:. it only vibrate once and nothing happens
Related
i have updated my ideosx5 u8800 to official beta version 2.3.5 of huiwei update successfully .......NOW i dont like it any more i wanna root but can't use the one i used before "z4root"
i need help if anyone know how to root the official beta version oversees thank you and can tell me also how to get o'clockmodwork to install new rom thank you
u8800
official beta version 2.3.5
keranl v 2.6.35.7-perf
take your time and see this. It will help you A LOT
http://www.albinoblacksheep.com/flash/posting
cheers
Loureiro said:
take your time and see this. It will help you A LOT
http://www.albinoblacksheep.com/flash/posting
Click to expand...
Click to collapse
lol
iamx5 said:
i have updated my ideosx5 u8800 to official beta version 2.3.5 of huiwei update successfully .......NOW i dont like it any more i wanna root but can't use the one i used before "z4root"
i need help if anyone know how to root the official beta version oversees thank you and can tell me also how to get o'clockmodwork to install new rom thank you
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1369783
i did this
i download from huawei a previus version.
i put the dload file on my removable sd
then i go to setings / location and security / instal from sd card
the phone restarts and boots to the rom that you have download
very easy
no need root
no need recovery
thats what i did after i confused but i am still having some minor problems
anyway thank
going back to your old way so u can root and install other rooms )))
step one download previes updates of ideos x5 you can find by googling
step two put in you SD card after that you are good to go ......
volume + and - and the power bottom then update will start
I have asked to my telecoms operator the unsimlock code for my Defy, it said is yet unlocked but it is not
I have flash a full sbf 2.3.6. Before it was a 2.3.4.
Motorola can't give any code.
Is there a way to show to the operator that is still locked? Or a non paid way to have the unlock code (it's free with my operator)
I know that is a way to have a soft unock but only with cm7 or miui.
But i prefer a hard unlock for motorola rom.
THX.
Defy+ / 4.5.1-134_DFP-139 / 45.0.1390.MB526.Retail.en.FR
Bouygues telecom fr.
Always complain in a retail center. Take your defy, show him, let him call to services. Be persistent, not rude.
Indeed you could use a softunlock for CM7 or MIUI, don't know if you could for stock.
Thx for the answer. I have try this morning the softunlock with cm7 Nightly ( the only one cm7 i can install) but don't work . I think that the softunlock is only for 2.2.
Could you please try to install the nightly again and then flash the zip from my latest post on that threat?
Edit:
The zip
http://forum.xda-developers.com/attachment.php?attachmentid=908455&d=1329605492
Also you can try to write at russian forum - motofan.ru ( i'm not able to post link there...)
Just write IMEI and your model to them, probably you'll receive unlock code.
If you won't, only way is patch.
labsin said:
Could you please try to install the nightly again and then flash the zip from my latest post on that threat?
Click to expand...
Click to collapse
Thx. i have try but don't work anymore. I have flashed the cm7 zip, then, before reboot, flashed your zip. Trying to change baseband too but don't work.
Hellmanor said:
If you won't, only way is patch.
Click to expand...
Click to collapse
Yes, but for the moment not possible to find any patch for 2.3
Witch CM7 version are you using? Could you attach the files in defy_simlock_originals on your sdcard?
Could do the froyo for bl6 patch it from there and re install cm7
teamwork makes the dream work
labsin said:
Witch CM7 version are you using?
Click to expand...
Click to collapse
cm72-120127.0846-NIGHTLY-Defy+.zip
others don't work because of a 2.3.6 full sbf.
labsin said:
Could you attach the files in defy_simlock_originals on your sdcard?
Click to expand...
Click to collapse
Sorry but i don't understand what you want to say.
Could do the froyo for bl6 patch it from there and re install cm7
Click to expand...
Click to collapse
Do you mean to follow this way below? But i'm afraid this way don't work with Defy+?
Common Problems/Questions
Black Screens when booting up: (!) Tried to install a version of Android with a lower CG Version than the one currently on the phone.
Weird behavior after installing a Fixed SBF: Install a matching Nandroid backup with your SBF, and remember to clear Cache/Dalvik Cache using Recovery.
Installed full Gingerbread SBF and can’t go back to another rom: (!) aha! We have a issue here!, latest Stock Gingerbread full SBFs comes with a Version 5 of the CG, meaning until not long ago you were pretty much screwed. But wait, there is hope! A one kind Éclair has been found in China Defys that comes with Version 5 CG!.
How to fix it:
Download this SBF and Flash it
Root your Phone
Download 2nd Init 1.4.2 and Install ClockworkMod Recovery
Download and install this Nandroid Backup
Enter Recovery, Wipe Data/Cache
After wiping, turn off your phone
Turn it on and get immediately into Bootloader mode
Flash this Fixed SBF
Delete Data/Cache again and reboot.
You WONT be able to install full SBFs of any Éclair or Froyo since these Androids have lower CG Versions.
**NOTE*: I just rephrased the original post since it can be a bit confusing, it is linked as source below.
**NOTE2**: If you are using a non-Chinese defy, DO NOT USE THE CAMERA FLASH while on the Chinese rom, it WILL kill your LED.
Source: ((Original post here))
How to Install CM7 after Installing a Full Gingerbread SBF: (!) Ok, first of all do all the steps above on "Installed full Gingerbread SBF and can’t go back to another rom"
Root your Defy (Using SuperOneClick 1.7 and not 1.9).
Install SystemRecovery from GoAPK. If you install 2nd init, you'll just get into a boot loop and have to start over.
Reboot to recovery. Do a factory wipe, then do the cache wipe.
Install CM7 .Zip and then gapps zip file. DO NOT wipe again, you'll just go back to 2.2.2 CEE (if you accidentally do this, you can pick up again from step 3).
profit!
Click to expand...
Click to collapse
Yes it works with Defy+ if you are on a bld6 rom (not for the bld7 roms)
My patch from a couple posts back makes a copy of the patched file on your sdcard in the folder defy_simlock_originals. Could you post them here?
Don't know if the module works with the gingerbread kernel. That's why it is a good idea to try to get CM7 with froyo kernel. It's also handy if you wan't to install other roms (WIUI ...)
But could you fist give those files? Maybe i've made a mistake again ^^.
Edit:
Sorry you don't have the right guide. That one is for bld5 downgrade.
Here is for bld6: http://forum.xda-developers.com/showthread.php?t=1486731
labsin said:
My patch from a couple posts back makes a copy of the patched file on your sdcard in the folder defy_simlock_originals.Could you post them here?
Click to expand...
Click to collapse
Again, thank you for your help and time
(I have put .txt for upload)
The file is similar to the normal defy one as far as I can tell that must have done it... So prob. faullt of different kernel. You could try to downgrade and use CM7 on froyo kernel.
labsin said:
The file is similar to the normal defy one as far as I can tell that must have done it... So prob. faullt of different kernel. You could try to downgrade and use CM7 on froyo kernel.
Click to expand...
Click to collapse
Ok i'll try tomorrow
labsin said:
The file is similar to the normal defy one as far as I can tell that must have done it... So prob. faullt of different kernel. You could try to downgrade and use CM7 on froyo kernel.
Click to expand...
Click to collapse
I have change the kernel with THIS METHOD
after, try with WIUI 2.2.17: no network; then with update-cm-7.1.0-11-Defy-signed: no network, even when changing baseband.
So, if all that i have made is right, maybe it's not fault of kernel.
Other difference between MB526 and MB525?
You get 'no network' all the time, even with the sim from the right provider, also without the patch?
I think you're the fist to try on a defy+. Maybe look to the Russian fora...
edit: And can you tell me what your Baseband version is? (in settings > about)
edit2: If it is EPU93_U_00.59.01 Try it after installing RC1.5 from here: http://www.defy-cm.net/jordan-cm7.1-RC/
labsin said:
You get 'no network' all the time, even with the sim from the right provider, also without the patch?
I think you're the fist to try on a defy+. Maybe look to the Russian fora...
edit: And can you tell me what your Baseband version is? (in settings > about)
edit2: If it is EPU93_U_00.59.01 Try it after installing RC1.5 from here: http://www.defy-cm.net/jordan-cm7.1-RC/
Click to expand...
Click to collapse
no network only with wrong provider: with the patch no code ask, but no network even with other baseband.
Yes it is EPU93_U_00.59.01 (cm7.2 working on defy+ as well)
with RC1.5 no boot after files install, stuck on google logo.
Now i have flash fix sbf to use 2.3.6 rom because of no battery problems and better battery life. So i'll wait and ask again to my operator.
Now baseband is EPU_U_00.60.03
Do you think if i'm able to put a official operator rom it will see that is no desimlocked? i don't have made backup of my official rom (newbie mistake ) so i have ask here if it's possible with this method.
Blocking by TI OMAP 3630
I have read this:
Blocking the Bootloader by TI OMAP 3630
Why and how is it locked Defy?
While Linux is Open Source Motorola keeps the Defy the locked bootloader. Why?
For commercial reasons of course: avoid too many warranty returns from sorcerer's apprentices who brické their phone, for example (although care is denied you still have to manage the folders!) But also the traders (who manage some of the guaranteed returns, but not that ... we shall see below).
So Motorola maintains bootoader of our favorite phone is not locked and ready to unlock the last views of Roma making the switch to SBF rootage and even more difficult. But the fact how this lock is it made?
Unlike other phones (other brands, but also other brand models *) easy to unlock, the Defy is equipped with a TI OMAP 3630 chip that manages its technology via "M-Shield technology 'in this block. So we did not do a software problem but rather a problem if one CPU is addressing this release.
This technology also manages the simlockage phone which also explains why the operators are far from favorable to the release of Defy.
No one arrived today to crack this lock: it should have the tool from Texas Instruments where he provided to authorized repairers to put the Motorola Defy mode "SE" (Systems Engineering) for this.
* These phones using Qualcomm chips or other, do not bénéfiecient techonologie the M-Shield and are much easier to unlock.
Click to expand...
Click to collapse
(Google trad) Or here in french
stucked at jrdan u97.21.51
I am new at this my defy went dead when tried to upgrade to 2.2 did not have backup. I searched the web and only jrdan u 97.21.51 will work and canot go back or change any more to any other roms. tried the rsd lite to flash diferent roms and nothing works. tried rom manager and 2ndinit recovery and nothing i get black screen. Is there anyway to get out of this? Please help
sion123 said:
I am new at this my defy went dead when tried to upgrade to 2.2 did not have backup. I searched the web and only jrdan u 97.21.51 will work and canot go back or change any more to any other roms. tried the rsd lite to flash diferent roms and nothing works. tried rom manager and 2ndinit recovery and nothing i get black screen. Is there anyway to get out of this? Please help
Click to expand...
Click to collapse
Wrong thread i think.
Have you try a wipe cache and data in stock recovery before rsdlite? see here how to do with Froyo
Hi guys, this is my first post. I have upgraded my X5 from the official gingerbread rom from the huawei site to the aurora ics 4.1. I want to downgrade to gingerbread again but i am having trouble. I have lost my backup of my phone before i upgraded it to ics 4.1.
Fliekpiering said:
Hi guys, this is my first post. I have upgraded my X5 from the official gingerbread rom from the huawei site to the aurora ics 4.1. I want to downgrade to gingerbread again but i am having trouble. I have lost my backup of my phone before i upgraded it to ics 4.1.
Click to expand...
Click to collapse
Just use the same method you used to install gingerbread. But beware, official gingerbread has pretty severe bugs, like missing calls and what not... maybe try some other ROM, MIUI or CM7...
Sent from my U8800
fjsferreira said:
Just use the same method you used to install gingerbread. But beware, official gingerbread has pretty severe bugs, like missing calls and what not... maybe try some other ROM, MIUI or CM7...
Sent from my U8800
Click to expand...
Click to collapse
The method don't work. I got stuck on the unpacking screen. I have tried it without the battery as well and but then I got the update failed message. I have noticed the bootloader option when shutting down the phone, will this help me in anyway?
Thanx for the reply!!
Hello guys sorry if im posting in the wrong place but anyway. Is the official gingerbread stable enough/no bugs and **** to use daily?
oskar1578 said:
Hello guys sorry if im posting in the wrong place but anyway. Is the official gingerbread stable enough/no bugs and **** to use daily?
Click to expand...
Click to collapse
Not really.most of us using custom roms like miui or aurora.they are not bug free at all but developers still updating
Sent from my U8800 using xda premium
I would really like to use a custom rom but im a bit scared that i would break my phone.. Is it hard to install the Aurora ICS? Is it ok for daily use? Also i dont know if im the only one but when i try to install almost any app from play store i get a" couldent install app on USB memory or SD card" error. Phone is unrooted.
Skickat från min u8800 via Tapatalk 2
just follow the guides and you will be fine..
some apps need rooted phones to work properly so you need at least to root your phone then you are fine...
oskar1578 said:
I would really like to use a custom rom but im a bit scared that i would break my phone.. Is it hard to install the Aurora ICS? Is it ok for daily use? Also i dont know if im the only one but when i try to install almost any app from play store i get a" couldent install app on USB memory or SD card" error. Phone is unrooted.
Skickat från min u8800 via Tapatalk 2
Click to expand...
Click to collapse
Probably changed something.don't worry, i almost changed 100 times custom roms before.after 2nd try you will think "this is piece of cake" and "bored, next rom" like me.
Sent from my U8800 using xda premium
So to root can I just use that app Z4Root or what was it called
Skickat från min u8800 via Tapatalk 2
oskar1578 said:
So to root can I just use that app Z4Root or what was it called
Skickat från min u8800 via Tapatalk 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1420728
this thread will help you to root and install custom rom
What 2.3 is the latest one that i should use? Im probally gonna install Aurora ICS..
Latest is B528, but rooting be done with a different way:
http://forum.xda-developers.com/showpost.php?p=23565074&postcount=7
Also all roms after B518 have locked bootloader, so need to flash the unlocked one from B518:
http://forum.xda-developers.com/showthread.php?t=1457490
I really messed up... Could need some help. I installed this one V100R001C00B526G001 the installation went ok but derectly after start i noticed a small green R over the signal markers am i on roaming? I had a good connection before in 2.2.1 also my internet wont connect :/ Could somebody please help me fix this or downgrade so i can get my phone back working...
You need to add the APN of your network then it should work just fine
Sent from my U8800 using xda premium
oskar1578 said:
I really messed up... Could need some help. I installed this one V100R001C00B526G001 the installation went ok but derectly after start i noticed a small green R over the signal markers am i on roaming? I had a good connection before in 2.2.1 also my internet wont connect :/ Could somebody please help me fix this or downgrade so i can get my phone back working...
Click to expand...
Click to collapse
That-Guy said:
Downgrade from 2.3.5 back to 2.2.2
1) Download U8800 V100R001C00B138SP04 (Overseas General) Android 2.2.2 from HERE.
2) Extract the "dload" folder and copy it (along with its contents) to the ROOT of the SD Card.
3) Turn on your U8800 while holding [VOL-] and [VOL+] and the Android 2.2.2 install should start.
4) Once finished you should be back to 2.2.2.
5) If you phone does not boot correctly power on phone while holding [VOL+] to boot into recovery and Reset to factory defaults.
6) Delete the "dload" folder from the SD Card.
Click to expand...
Click to collapse
you can root your phone on 2.2 too just follow this guide for that
http://www.modaco.com/topic/341011-ultimate-guide-to-the-huawei-u8800/
Btw when i upgraded to 2.3 i used this one here and it went pretty smoothly.
Well now i installed Aurora 4.1 how do i install the update 1a now? Also i have Saunalahti how do i do that with the connectbot? Didnt really understand it :S Calling is working atm i think.. but mobile internet doesnt
Download connectbot and open, Click ssh left side bottom and select local and use a nickname when the terminal opens type
su
setprop persist.eons.enabled 0
And reboot.
To install update 1a just flash it with cwm.
I tried the connectbot but do i have to save it somehow after i wrote that or just home and reboot? Also i've checked my APN settings they are as they should for Saunalahti :/ Got an R over my signal idk if im roaming :/ im at home internet wont work *_* Im on Aurora 4.1 atm u think it would help if i flashed 4.1 update 1a?
You can try but since you had this prob from the official update you better try reinstalling the official again
Also try this see if your net connects when you turn on data roaming if it does that means you are on roaming some how
Sent from my U8800 using xda app-developers app
umm what official should i try then? Im from finland so.. Is it just to do the exact same thing as when i upgraded from 2.2.1? Or do i need to go back to 2.2.1 first or sumfin like that?
first try a master reset if not helpful then just try doing it without downgrading if that doesn't work try it with a different official update and if that too doesn't work then try downgrading and upgrading again.
How do i do a master reset? Also i saw the downgrade guide on that root ,CWM etc.. but the link is dead
settings>backup&reset>Factory data reset
Alright guys?
I want to go back to gingerbread, after having been tempted by the bright lights of ICS, and realising that actually they really aren't that bright. I've played with all sorts of roms, from aurora to shendu to pacman to cyanogenmod 10, all over the place. I've only very recently realised that the best thing for my phone, is to head on back to gingerbread, and install cm7.2.
But I can't. I keep trying a million different methods, and my phone simple responds with 'update failed'.
This is what's in the .log file:
Failure: OSBL°æ±¾¼ì²éʧ°Ü.
dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Does anyone have any idea what's going wrong here?
I've tried it with no battery, same result.
I've followed the guides on here, same result.
I've tried only flashing part 2, same result.
Can someone please talk me through this? It's doing my head in and I just want a phone that works.
Going back to gingerbread
trionix said:
Alright guys?
I want to go back to gingerbread, after having been tempted by the bright lights of ICS, and realising that actually they really aren't that bright. I've played with all sorts of roms, from aurora to shendu to pacman to cyanogenmod 10, all over the place. I've only very recently realised that the best thing for my phone, is to head on back to gingerbread, and install cm7.2.
But I can't. I keep trying a million different methods, and my phone simple responds with 'update failed'.
This is what's in the .log file:
Failure: OSBL°æ±¾¼ì²éʧ°Ü.
dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
Does anyone have any idea what's going wrong here?
I've tried it with no battery, same result.
I've followed the guides on here, same result.
I've tried only flashing part 2, same result.
Can someone please talk me through this? It's doing my head in and I just want a phone that works.
Click to expand...
Click to collapse
Do you have a nandroid backup of any gingerbread or froyo rom with 404020 baseband? for downgrading to GB without nandroid backup, try to flash 404020 baseband first and flash gb rom after all wipes.
Madhunath said:
Do you have a nandroid backup of any gingerbread or froyo rom with 404020 baseband? for downgrading to GB without nandroid backup, try to flash 404020 baseband first and flash gb rom after all wipes.
Click to expand...
Click to collapse
I have no backups at all, sorry.
How do I go about flashing 404020?
trionix said:
I have no backups at all, sorry.
How do I go about flashing 404020?
Click to expand...
Click to collapse
It can't be happened like this.
Try to reflash official ics with all steps and after that, boot the phone once to stock ics and then flash step 2 from official gb.
Note.
Rename the step2 to, UPDATE.APP , if you're not rename it.
Sent from my U8800pro using xda premium
Okay, I've done it.
I used roadkil's disk image to install the froyo. Then I flashed gingerbread 572, and it installed, finally. Excellent stuff!
BUT now the phone is network locked (I think). It's refusing to connect to the network. I installed the cm7.2 rom (which incidentally is very nice to use), but yeah. I can use it for everything, other than as a phone.
Any ideas? I need it unlocked tomorrow, because I have a date and if my phone doesn't work, I can't contact the girl! Help!
EDIT: I'll make a new topic.
trionix said:
Okay, I've done it.
I used roadkil's disk image to install the froyo. Then I flashed gingerbread 572, and it installed, finally. Excellent stuff!
BUT now the phone is network locked (I think). It's refusing to connect to the network. I installed the cm7.2 rom (which incidentally is very nice to use), but yeah. I can use it for everything, other than as a phone.
Any ideas? I need it unlocked tomorrow, because I have a date and if my phone doesn't work, I can't contact the girl! Help!
EDIT: I'll make a new topic.
Click to expand...
Click to collapse
Oh God, you have a -51 ..
Please tell us that you have -51 .
The procedure is different on Pro.
Anyway, please don't make useless threads.
If you tell us that you have a -51 on CM7.2 Mod thread , then someone would help you.
So anything else you want to ask for this rom, go to the right thread and ask or tell us your problem.
For your problem now, ask somcom3x or danidable on CM7 thread, i'm sure that they can help you , cause they are -51 users.
Regards.
Sent from my U8800pro using xda premium
gkalenis said:
Oh God, you have a -51 ..
Please tell us that you have -51 .
The procedure is different on Pro.
Anyway, please don't make useless threads.
If you tell us that you have a -51 on CM7.2 Mod thread , then someone would help you.
So anything else you want to ask for this rom, go to the right thread and ask or tell us your problem.
For your problem now, ask somcom3x or danidable on CM7 thread, i'm sure that they can help you , cause they are -51 users.
Regards.
Sent from my U8800pro using xda premium
Click to expand...
Click to collapse
Oh no....
I can unlock your phone if you upgrade to gb. MAKE SURE THERE IS A -51 OR BRICK.
Message me instead of opening threads please.
Sent from my SGH-T769 using Tapatalk 2