Hi Guys, just a quick question here, I recently changed my ROM from CM 7.2 to CM 7.2 Mirage - Kang Build by using a CWM Recovery SD, clearing cache and such, all worked correctly and properly, just that I didn't know that the Kang Build did not support 16bit Frame Buffer that I wanted so that NC can atleast run Blood & Glory.
Now my question is if I reverted back to CM 7.2 by clearing Dalvik Cache and Cache first, would there be any problems in terms of the system and apps?
No, there would be no known issues... both are the same build as far as that goes...
thewaywardgeek013 said:
Hi Guys, just a quick question here, I recently changed my ROM from CM 7.2 to CM 7.2 Mirage - Kang Build by using a CWM Recovery SD, clearing cache and such, all worked correctly and properly, just that I didn't know that the Kang Build did not support 16bit Frame Buffer that I wanted so that NC can atleast run Blood & Glory.
Click to expand...
Click to collapse
I've posted a 16 bpp kernel here for that build.
Frank
frankusb said:
I've posted a 16 bpp kernel here for that build.
Frank
Click to expand...
Click to collapse
Hi Frank, I also read your posts in Mirage - Kang Thread, thank you for posting the thread of your kernel, didn't know you posted it here.
Also thanks DizzyDen, was a bit cautious at the time because there were a lot of changes that was done from Cm 7.2 > Mirage, didn't know that it would just overwrite it.
P.S.
@Frank - there's a new CM 7.2 MiRaGe - KANG build
Here:
Update 06/23/2012:
- New 06232012 build, synced with CM
I just don't know if the sync was for a Nightly Build of CM.
thewaywardgeek013 said:
@Frank - there's a new CM 7.2 MiRaGe - KANG build
Here:
Update 06/23/2012:
- New 06232012 build, synced with CM
I just don't know if the sync was for a Nightly Build of CM.
Click to expand...
Click to collapse
There were no kernel changes between 6/8 and 6/23. Actually you can probably run either of the kernels I posted with any CM7 build.
Frank
Related
Hi guys,
Just have a quick question- wondering if anyone is running into the same problem. I just installed Cyanogen 7 rc1, and it is force closing between the load screen and the welcome screen (for the first time).
I'm not sure if this is the correct place to post this, but any help would be great.
Thanks
Based off what I've read in the development threads, the RC does't seem to be too much of an RC. I'd restore and wait.
you have to flash RC1 over a nightly build.
Nowak4G said:
you have to flash RC1 over a nightly build.
Click to expand...
Click to collapse
Yep! Its was a known issue with the first build of RC1. Something was botched. I recommend you either flash RC1 over nightly build #38, or you just flash nightly build #39 (which already includes fixes that were left out of RC1).
Cheers!
So...I haven't really followed CM7 much, but I see that there is a cm7.1 now. What exactly is that vs the CM7 nightlies? Can I use dalingrin's OC kernel (or any other OC kernel) on CM7.1? Can I even put CM7.1 on my nook (as in will it work on it, not how to do it)? Would I want to put it on, or should I just run nightlies?
thanks in advance for the help...cm7 is a big unknown to me, obviously
For the Nook Color, the current 7.1 release is a RC or Release Candidate which falls between nightly and stable. Several nightlies have now followed, and I believe those nightlies are now also 7.1.
Yes, you can load 7.1RC on the Nook Color and it runs very well; yes you can use Dalingrin's OC kernel, and you can do this all off a uSd which is all what I am doing.
I could only find RC1 (is that the latest anyway) and only 7.0 nightlies. Is there a link to updated 7.1 anywhere?
This weekend I finally wiped my Phiremod 6.3 and installed CM7.1 RC1 and Dalgrin's 6/30/11 kernel. It's been super sweet thus far.
I never cease to be amazed at how great a tablet this is.
I'm confused about how to install the OC kernel on SD. I'll do some searching in the interim, but if you have a link off the top of your head, please share.
Starting to get very intrigued by CM7. The earlier run on what was supposed to be a class 6 sucked compared to a trusty ol' class 4 sandisk...
Actually, I think I get the OC thing (recovery mode, named update, etc). But now I have a different problem. I tried 7.1 and after installing market I can't search for anything. Any time I try any of the search icons or menu, nothing happens. Any thoughts there from anyone?
Now I'm getting confused. Was running RC1 and installed nightly121 over it, clearing dalvik and cache...according to my thinking I've got 2.34 installed with updates from the nightly..correct?
2kst said:
Now I'm getting confused. Was running RC1 and installed nightly121 over it, clearing dalvik and cache...according to my thinking I've got 2.34 installed with updates from the nightly..correct?
Click to expand...
Click to collapse
CHeck the version in 'about tablet'. When I did nightly 128, it said it was still cm7.0. Or maybe I read it wrong. Hopefully someone more knowledgeable can answer...
doncaruana said:
CHeck the version in 'about tablet'. When I did nightly 128, it said it was still cm7.0. Or maybe I read it wrong. Hopefully someone more knowledgeable can answer...
Click to expand...
Click to collapse
My about shows cm7 and then a date 07032011 - Jul 3, 2011 ..the nightly date no version
I apologize for the noob question.
I have cm7 stable for my defy and am very pleased w/ it. I am waiting for cm9 stable, but was curious if the very last nightl build of cm7 would be better than the stable mod (since it's the newest version)
I'm wondering if the latest cm7 nightly ( cm_jordan_full-63.zip ) is as stable/more stable than the cm7 stable release. also, can i install the nightly build over my current cm7 stable? or do i have to wipe all my data and start fresh?
thanks,
I hope i'm not repeating some other thread, but i couldn't find this specific answers around.
tronjojo said:
I apologize for the noob question.
I have cm7 stable for my defy and am very pleased w/ it. I am waiting for cm9 stable, but was curious if the very last nightl build of cm7 would be better than the stable mod (since it's the newest version)
I'm wondering if the latest cm7 nightly ( cm_jordan_full-63.zip ) is as stable/more stable than the cm7 stable release. also, can i install the nightly build over my current cm7 stable? or do i have to wipe all my data and start fresh?
thanks,
I hope i'm not repeating some other thread, but i couldn't find this specific answers around.
Click to expand...
Click to collapse
nightlies are trying out new devs mod n features they cant be stable but they are useable
tronjojo said:
I apologize for the noob question.
I have cm7 stable for my defy and am very pleased w/ it. I am waiting for cm9 stable, but was curious if the very last nightl build of cm7 would be better than the stable mod (since it's the newest version)
I'm wondering if the latest cm7 nightly ( cm_jordan_full-63.zip ) is as stable/more stable than the cm7 stable release. also, can i install the nightly build over my current cm7 stable? or do i have to wipe all my data and start fresh?
thanks,
I hope i'm not repeating some other thread, but i couldn't find this specific answers around.
Click to expand...
Click to collapse
"Stable" is a subjective question, but no you don't have to wipe your data; just wipe cache (not data) install zip from sd, choose the new nightly, install it, then "advanced", "wipe dalvik cache" wipe and reboot. You should still have all your apps and everything still but be on the new version.
If you don't like 63 or whichever you tried, no big deal, wipe cache again, reinstall previous version (or if you made a backup just restore it) the same way and you'll be back on that version.
So it's not *that* risky, just make sure to use the CWM recovery for everything, not "stock" (I've done that by mistake and had to reflash sbf, re root, install 2nd init etc all over again).
hope this helps one noob to another.
@jpchopper:
thanks,
when you say don't use "stock" instead of cwm what do you mean? is there a stock way to flash the rom? i thought when booting to recovery it automatically goes to cwm?
wiui
Hi, thanks again for all the help. i've been using the latest cm7.2 nightly and all's good (except my earpiece died, and i'm waiting for my k850i earpiece off ebay.)
Anyways, I was curious about trying wiui (non ics) and wondered since Miui is based from cm7 originally, can i flash the zip the same way as i did when i replaced cm7.1 stable to a nightly, or to 7.2 nightly? or iswiui too different and would i need ot do a complete wipe to install wiui fresh?
thanks,
Which ROM? with list...
I am looking over the available ROMs, and what I find, with apologies to any I've missed, is:
GOO:
Euroskank/jellybro/grouper/cm-20120724.0033-SKANKY-grouper.zip
teameos/roms/eos3/nightlies/grouper/EOS-grouper-21120724-10.zip
winner00/grouper/cm-10-20120724-UNOFFICIAL-grouper.zip
ROM MANAGER:
euroskank cm10 kangs/cm10.grouper.20120724-0033
TeamAndroid/cm_grouper-sparksco-20120723
Phazor/CM10 Unofficial
From XDA FORM
[AOSP][4.1.1] CM10 Kang **Updated 7/23 11:50pm MST** http://forum.xda-developers.com/show....php?t=1782433
[ROM] KRAKD-7 by SoCal Devs █ July 1st 2012 █ v1.0 http://forum.xda-developers.com/show....php?t=1745904
[ROM] Pure AOSP http://forum.xda-developers.com/show....php?t=1790320
[linaro] cookie & cream linaro edition http://forum.xda-developers.com/newt...wthread&f=1677
and some custom kernels, including:
[KERNEL][GPL][Linaro][OC 1.6][UV][GPU+][ZRAM][SIO+V(R)] 2012-07-23 motley 1.0.6 http://forum.xda-developers.com/show....php?t=1775798
[KERNEL] [3.1.10] [[email protected]/OV/BFQ/smartassv2/init.d] Atlantis R2 http://forum.xda-developers.com/show....php?t=1745983
I've been trying to sort out what the benefits are of each of these, and in particular, understand which ones are really 'one time shots' and which ones are likely to continue in ongoing development, as we as which ones are at least semi-suitable for daily drivers.
I'd appreciate any thoughts! thanks, jf
friedsonjm said:
Which ROM? with list...
I am looking over the available ROMs, and what I find, with apologies to any I've missed, is:
GOO:
Euroskank/jellybro/grouper/cm-20120724.0033-SKANKY-grouper.zip
teameos/roms/eos3/nightlies/grouper/EOS-grouper-21120724-10.zip
winner00/grouper/cm-10-20120724-UNOFFICIAL-grouper.zip
ROM MANAGER:
euroskank cm10 kangs/cm10.grouper.20120724-0033
TeamAndroid/cm_grouper-sparksco-20120723
Phazor/CM10 Unofficial
From XDA FORM
[AOSP][4.1.1] CM10 Kang **Updated 7/23 11:50pm MST** http://forum.xda-developers.com/show....php?t=1782433
[ROM] KRAKD-7 by SoCal Devs █ July 1st 2012 █ v1.0 http://forum.xda-developers.com/show....php?t=1745904
[ROM] Pure AOSP http://forum.xda-developers.com/show....php?t=1790320
[linaro] cookie & cream linaro edition http://forum.xda-developers.com/newt...wthread&f=1677
and some custom kernels, including:
[KERNEL][GPL][Linaro][OC 1.6][UV][GPU+][ZRAM][SIO+V(R)] 2012-07-23 motley 1.0.6 http://forum.xda-developers.com/show....php?t=1775798
[KERNEL] [3.1.10] [[email protected]/OV/BFQ/smartassv2/init.d] Atlantis R2 http://forum.xda-developers.com/show....php?t=1745983
I've been trying to sort out what the benefits are of each of these, and in particular, understand which ones are really 'one time shots' and which ones are likely to continue in ongoing development, as we as which ones are at least semi-suitable for daily drivers.
I'd appreciate any thoughts! thanks, jf
Click to expand...
Click to collapse
I'll bite:
teameos/roms/eos3/nightlies/grouper/EOS-grouper-21120724-10.zip
and
[KERNEL][GPL][Linaro][OC 1.6][UV][GPU+][ZRAM][SIO+V(R)] 2012-07-23 motley 1.0.6
are a wonderful combination. I honestly bought this tablet on the strength of teameos development (has kept my OG Xoom purring along like a Ferrari), and motley's kernel (gpuoc version) is a super compliment to the teameos rom. Both are is the early stages, but bug free--daily drivers for certain.
Add the teamwin TWRP recovery and you've got a champion.
okantomi said:
I'll bite:
teameos/roms/eos3/nightlies/grouper/EOS-grouper-21120724-10.zip
and
[KERNEL][GPL][Linaro][OC 1.6][UV][GPU+][ZRAM][SIO+V(R)] 2012-07-23 motley 1.0.6
are a wonderful combination. I honestly bought this tablet on the strength of teameos development (has kept my OG Xoom purring along like a Ferrari), and motley's kernel (gpuoc version) is a super compliment to the teameos rom. Both are is the early stages, but bug free--daily drivers for certain.
Add the teamwin TWRP recovery and you've got a champion.
Click to expand...
Click to collapse
So, you flashed
teameos/roms/eos3/nightlies/grouper/EOS-grouper-21120724-10.zip first,
and then flashed
[KERNEL][GPL][Linaro][OC 1.6][UV][GPU+][ZRAM][SIO+V(R)] 2012-07-23 motley 1.0.6
over it?
What did you wipe when doing these?
thanks, jf
friedsonjm said:
So, you flashed
teameos/roms/eos3/nightlies/grouper/EOS-grouper-21120724-10.zip first,
and then flashed
[KERNEL][GPL][Linaro][OC 1.6][UV][GPU+][ZRAM][SIO+V(R)] 2012-07-23 motley 1.0.6
over it?
What did you wipe when doing these?
thanks, jf
Click to expand...
Click to collapse
I run that same setup often, it's pretty solid, and aaronpoweruser (or something like that) has a CM10 kang optimized with Linaro that's a nice build.
You need to be in recovery and wipe data (labeled factory reset), wipe cache, wipe dalvic cache, and wipe system. Then if I were you i'd flash the rom, boot and setup and let it sync and settle a bit then reboot to recovery, make a nandroid backup, and wipe cache and dalvic cache and flash the kernel zip file.
Lots of people just flash the kernel without wiping the caches, it's kinda up to you on that one, it takes approximately 2 seconds Im thinking.
I'm running the cm10 kang from xda and motley. It is amazingly smooth. Like buttered butter
Sent from my oc'd cm10 nexus 7
rockaholic112 said:
I'm running the cm10 kang from xda and motley. It is amazingly smooth. Like buttered butter
Sent from my oc'd cm10 nexus 7
Click to expand...
Click to collapse
Does it include [KERNEL][GPL][Linaro][OC 1.6][UV][GPU+][ZRAM][SIO+V(R)] 2012-07-23 motley 1.0.6 by default? Or did you flash over it? Or is it not part of what you are using at all? thanks, jf
friedsonjm said:
Does it include [KERNEL][GPL][Linaro][OC 1.6][UV][GPU+][ZRAM][SIO+V(R)] 2012-07-23 motley 1.0.6 by default? Or did you flash over it? Or is it not part of what you are using at all? thanks, jf
Click to expand...
Click to collapse
OK.. executed ROM and kernal, now I find I don't have gapps ! Which gapps do I need to flash.. and where do I find it?
friedsonjm said:
OK.. executed ROM and kernal, now I find I don't have gapps ! Which gapps do I need to flash.. and where do I find it?
Click to expand...
Click to collapse
Ah.. I see I somehow have to get this tablet recognized as 'my' N7 - any advice on that appreciated!
friedsonjm said:
OK.. executed ROM and kernal, now I find I don't have gapps ! Which gapps do I need to flash.. and where do I find it?
Click to expand...
Click to collapse
Sounds like you have some reading to do bud. The first post should have the details but it may be in the next couple down. Could be in Rom Manager if you flashed ClockWork Recovery. Search for some rom basics so you understand kernal before flashing. Also, I always try to read at least the first few and last few posts of any new rom to see what people are saying about the rom.
Good luck!
teckels said:
Sounds like you have some reading to do bud. The first post should have the details but it may be in the next couple down. Could be in Rom Manager if you flashed ClockWork Recovery. Search for some rom basics so you understand kernal before flashing. Also, I always try to read at least the first few and last few posts of any new rom to see what people are saying about the rom.
Good luck!
Click to expand...
Click to collapse
Well, I've flashed quite a few ROMs on my Droid X and Color Nook, this is the first time I've done a factory reset and not been ask to reinitialize my google email and password on startup.... any advice on that would be highly appreciated.
... found jb gapps on goo-im
EDIT: SOLVED> OK, ROM came with multiple 'users' already set up.. I had to select 'me' and reboot! Jeesh... y'learn something new every day, I guess..
Lots of work, but worth it...
I have done a search and had a hard time finding decent instructions for upgrading an emmc installed CM 7 nightly to emmc CM 7.2 stable. I have already downloaded the 7.2 from the site...but its been so long since I installed this nightly that I have forgotten how to upgrade the Rom....and I Use my R800x alot for gaming, but would prefer a bigger screen for some games that only use Touchscreen. the reason its so outdated is because i rarely use my NC much these days, but am getting back into using it more.
Current Rom: CyanogenMod-7-11162011-NIGHTLY-encore
Sent from my Nook Color on CM 7.1 nightly (outdated)
brsingr said:
I have done a search and had a hard time finding decent instructions for upgrading an emmc installed CM 7 nightly to emmc CM 7.2 stable. I have already downloaded the 7.2 from the site...but its been so long since I installed this nightly that I have forgotten how to upgrade the Rom....and I Use my R800x alot for gaming, but would prefer a bigger screen for some games that only use Touchscreen. the reason its so outdated is because i rarely use my NC much these days, but am getting back into using it more.
Current Rom: CyanogenMod-7-11162011-NIGHTLY-encore
Sent from my Nook Color on CM 7.1 nightly (outdated)
Click to expand...
Click to collapse
Just follow the instructions here:
http://forum.xda-developers.com/showthread.php?p=12797652
Just substitute the newest rom you have downloaded in the instructions.
leapinlar said:
Just follow the instructions here:
http://forum.xda-developers.com/showthread.php?p=12797652
Just substitute the newest rom you have downloaded in the instructions.
Click to expand...
Click to collapse
Ok. Thanks for the help.
Sent from my Nook Color on CM 7.2 KANG build