Related
I have a problem with my device.I thought maybe someone could help me.
The problem is that the device stuck at the boot screen (shown in screen) and I can't install windows or something,because when i turn the bootloader mode it's shows that it's connected to the pc,but it's actually not,PC not even shows that the device is connected.
I have second battery,but that doesn't changes anything..
Could someone please help me?
More info please!
What Operation System is running your PC?
Is it connected to a "powered" USB (like on the back of your PC)
As far as i can see you have a G4 phone, patched with an .Olip.
You should _only_ flash it with G4-aware ROMs!!!
Windows 7
I think i tried on xp to..
tried to the front ant back to.
Ah
You tried it with XP too?
The colored boot state doesn't say anything.
It's just saying that RUU put your device into this state.
With XP this state would soon turn into an upload screen.
"tried to the front ant back to."
Yes, the front USB may or may not have enough power
So let's try XP and backside USB!
For me it sometimes worked after rebooting XP.
ok,I will try on xp and on the USB in the back,and I tell you the results.
So I have tried to install on xp,but it can't verify the device,like it's not connected,it even won't make a sound that it's connected.Any suggestions?
Could anyone help me?
Let us know what ROM you’re trying to install, and let us know if you’re putting the phone in boot loader mode yourself, or if the phone boots and goes to the boot loader on its own, as this can sometimes cause a connection problem.
Well I installed a ROM earlier,when i turn on the phone i get the screen in the pick and nothing else,if I go to bootloader mode it won't connect to the pc.I have no idea what to do,please help.
Try this.
1. Download “Wizard Love ROM”.
2. Press the soft reset button, then press and hold the camera key, you shouldn’t see any splash screens, it should go straight to the boot loader, if not try again.
3. Connect the phone to the PC, you will see “USB” in the lower left corner, if not repeat step two.
4. Now flash the Wizard Love ROM.
Hope that helps
That's the point.I know how to enter to bootloader and all that,but when i do,it won't connect to the pc.
i can't believe it.It just start working again.by it self.And booting normaly.But i'm still interested why he was stuck..
Hello,
I tried to update the radio and the SPL version on my Tattoo. Everything went fine until I had to reboot my phone. It shut down alright, but it never powered on again.
These are the following problems I am having with my Tattoo at the moment:
Cannot power on phone.
Cannot boot into recovery mode.
Cannot boot into FastBoot.
When I connect it to my computer via USB, nothing happens.
The only thing that it's responding to is when I connect my it to my charger.
Does anyone have a solution or is my phone dead forever?
Thanks ahead!
bump? anyone?
Send it back to HTC. If anyone can do anything about it they can. There's nothing else you can do. Sorry
boo.. that sucks..
Well, thanks anyway
Ehm, I don't want to post a New Thread so I'm gonna ask here:
Does anyone have the pinout for the Tattoo?
Take a look at this. I guess they fix such things (but you never know if they just are after your money. http://www.ort-jtag.com/index.php
Yeah I saw that already. Also, there is a file name Tattoo Jtag on their website in the Support section. However, to access that section you have to enter your products serial number (which is I'm guessing the phone's serial number). I have tried several serial numbers (including mine) and all of them were 'invalid' so I never checked the files out.
Also, they only have one thing in the shop which is a kit and it costs $330 so no thanks
I have a similar problem, I would like to share my knowledge although I must be completely out of way.
My experience is based on the BeagleBoard and Angstrom so I really don't know the HTC HW and Android at all...
- The device boots from an xloader that instructs the device how to proceed with the boot
- the bootloader takes place (great u-boot in the beagleboard ?? in the HTC phone) the bootloader allows for ROM or kernel+rootfs flashing and much more
- now the kernel is loaded.....
User mode applications do not allow to have access to the memory area where xloader and u-boot lie so they should be safe all the time to allow for device reflashing.
So we should have access to the device via bootloader anytime if we knew how... maybe somebody can help us further.
Fabio
Same here...Exact same issue...No Recovery mode...No USB Connectivity, Screen turns on but is blank, alhough I did see Tattoo popping up initially but not any more...All I can see is the LCD back light turns on...Battery does charge...Also when I try to enter Recovery mode screen keeps blinking as if it is trying to restart again and again...Someone help
similar problem here, but i get absolutely no response from the phone, it doesn't even recognize the charger. do i just throw it away and buy a decent one or is there a solution?
Sparky the only way for now to fix that click is to bring it to some service point that have that ort jtag, because only way to fix that is to writte new boot sector on phone . Im sure that i know at least 2 services that have ort jtag in Novi Sad . Look for marvel *Miroslav in Ns, or send me private message
same thing happened to me
just this morning, and in desperation I tried hard to remove the batt cover (prob pressed some of buttons, I felt a jerk and ho it was back in amon ra`s recovery, nect time I just removed the battery waited for 30 secs, then press off&home and hold it till recovery came back) but for good half hour NO REACTIONS , ABSOLUTE BRICK, nothing when I put the usb in PC or in socket, dead screen, no sounds and no reaction to ANY combination of keypress. I guess you could call me lucky (in last few days I flashed at least 3 versions of froyo roms, this afternoon I bought =8GB class4 Kingston, formated it in PC FAT32 default size, copied EVE. from my 2gig rom then just turned it down (yes I am brave) and put the 8gig in tattoo, it works like a charm (finger crossed it will continue)
So is there an available Jtag for the Tattoo yet?
I'm in the same situation. No recovery no fast boot, Damm!
I`ve update psfreedom with psgroove_hermes_v4 zip file then my tattoo reboot and now I only get the Tatto title screen but nothing happends.
Somebody have clue to give back life my phone.
Thanks!
if you can get to the title screen, that means you can connect it to your pc via USB and recover from a backup (I hope you made one)
Hello, I connect my tattoo to my pc, but usb connection is not available yet.
Is There is a way to activate usb when my phone blocks in tattoo logo??
Thanks for reply.
payasi35 said:
Hello, I connect my tattoo to my pc, but usb connection is not available yet.
Is There is a way to activate usb when my phone blocks in tattoo logo??
Thanks for reply.
Click to expand...
Click to collapse
You have to enter in fastboot.
Hold volume down and turn on phone.
Cheers
Sorry but as i said before, I can't access to recovery menu neither fast boot menu.
I just got from a friend an Acer Iconia a500 he says that is bricked.
I tried this method: http://forum.xda-developers.com/showthread.php?t=1572622
But I can't continue because I don't have ADB access, what should I do?.
Thanks for all and God bless you.
EDIT:
I got everything to using the secret APX mode, but now is still everything the same the Android System is still there and not charging and not touchscreen...
Go to the bottom to see how I solved this lol...
Click to expand...
Click to collapse
If your tablet Iconia 500 (ONLY ACER ICONIA A500) went crazy, and present the next symptoms (Yes it has flu...):
-flu
-Android System icon
-Doesn't want to charge (20% / 15% 12%).
-TouchScreen is not responsive.
-Always when you turn it on says Shutting down and never shuts down.
-In case you're using ICS shuts down immediately without even make you see.
The solution is the next!:
1. Download this file: http://www.4shared.com/archive/zyP91E0C/root-321-V4.html (This is the file to put recovery in case that you don't have it).
2. Extract all the files in any folder, it doesn't matter where you put it.
3. Go to Image Folder and rename the recovery to: anyname.img.
4. Download any of the lastest recoveries for Acer Iconia a500 (it will work believe me lol).
5. Put the recovery in the Image folder (Ex. Iconia/root-3.2.1/Image/) and rename it to recovery.img
6. Now open with Administrator Rights DotNetDetecter.exe
7. Continue, continue and continue.
8. If you have ADB Active just put it and it will install it. (If you don't have it just go to 8.1)
8.1 Shut down the tablet completly, connect your USB Cable *micro* (Tablet-Computer), take a paper clip and put it on reset without release it then press the power button and count until 4 or u4ntil you hear the sound when you plug something into Windows
8.2 Now your tablet is in APX Mode and the Acer Utility should now work.
9. Put your UID with a 0 in front of all the numbers (if you don't have it go to secret step).
10. Now let everything work. After everything is done you should have recovery now.
11. Press down volume and the tablet will take you to the recovery.
12. Download some ROM 3.2 or ICS 4.0.3, install it via recovery.
13. Download this file: http://www.mediafire.com/?9svnvdk982sxrw4
14. Install the version you have choosen via Recovery.
15. Voila! Your tablet is revived right now
Press thanks button if this helped you =D
SECRET STEP TO GET UID (IS NOT SECRET THOUGH... lol)
Just go to USB tools and use USBdeview, and is done... (Remember to stay in APX Mode)
CREDITS:
-Fguy on www.4pda.ru (EC_FLASH FILES)
-timmyDean on XDA (Root-3.2.1-V4 FILES)
-Moscow Desire (XDA Member, if it wasn't for him it couldn't get to see the light)
thanks for the great guide but could you point me in the right direction for the lastest recoveries for Acer Iconia a500 as the links i find dont work
thanks in advance
matthew
mjfaderway said:
thanks for the great guide but could you point me in the right direction for the lastest recoveries for Acer Iconia a500 as the links i find dont work
thanks in advance
matthew
Click to expand...
Click to collapse
Acer Recovery from the Market should have the most recent RA Recovery, and the original GPL compliant CWM recovery.
Or if you already have the original CWM, you can get the most recent RA Recovery here. Just check the threads for the flash files.
http://forum.xda-developers.com/showthread.php?t=1459821
For CWM you will need to go to tegraowners.
Dear Sir
I have same problem with my tablet too for 4 months and I explained that HERE or HERE
and i followed all instruction in these 2 threads
http://forum.xda-developers.com/showthread.php?t=1572622
http://forum.xda-developers.com/showthread.php?p=24531880#post24531880
and I used from ECrom files created by Mr. Fguy ver 4.03-22 and 3.2.1 but my problem is Lasting yet
can you help me?
you had same problem and you know how bad is a bricked tablet in your hands
thank you and GOD bless all of you
[email protected]
[email protected]
darvis said:
Dear Sir
I have same problem with my tablet too for 4 months and I explained that HERE or HERE
and i followed all instruction in these 2 threads
http://forum.xda-developers.com/showthread.php?t=1572622
http://forum.xda-developers.com/showthread.php?p=24531880#post24531880
and I used from ECrom files created by Mr. Fguy ver 4.03-22 and 3.2.1 but my problem is Lasting yet
can you help me?
you had same problem and you know how bad is a bricked tablet in your hands
thank you and GOD bless all of you
[email protected]
[email protected]
Click to expand...
Click to collapse
I don't have the tablet anymore, it was a friend one, I can help you with your big problem because really it was easier than I thought, you can PM me with all the details, and yes the flu is a big problem... =P
Problems with opening up settings to turn on usb debugging
Hi Travisantonio,
I have a question:
Did you have any problems opening up the settings when you were on the black "android system" screen?
My touch screen is completely unresponsive at the moment.
Maybe I didnt read or understand everything but with my tab USB view didnt give me my ID or it wouldnt work. Got into ADX mode but couldnt get things working. Tried ADB to list devices and would never list anything. I heard my computer beep when I would hook it up but couldnt really do or complete anything. I couldnt get the DOTNETDETECTOR (PBJUPRADE_ to work. Tried A500 APX flash utitlity. Tired nvflash and falied. Guess I should list more information but at this point I tried so many things to recover dont remember the order I did things. I originally tried to upgrade to a Rom but all things failed and actually not sure what ever got completed. Only thing I could tell my tab did besides black screen was the power button either was white(some type of one) or orange.
This helped me to recover my bricked Acer 500 tablet after a failed ICS upgrade. The Acer update seemed to go okay, but on reboot it froze at the Acer logo and had an error in the corner. Every reboot or button/reset resulted in this. It would not recover or do anything else. I was able to get the USB device ID /serial number using the USB deview 64 program in the usb folder. There were several entries for the tablet but only one had a usable number (bottom right line at the end). Then the tool wiped the tablet and reloaded 3.2.1 and booted to factory new. Thanks for the instructions and to all the other XDA-ers for the tools. I am now on ICS properly.
Trying to recover a bricked acer a500, I just have a black screen on boot with no boot logo, vibration or letters or words on the screen
trying to enter recovery/update mode doesnt work
Im up to the step where is says put in your UID into the program
Just go to USB tools and use USBdeview, and is done...
Click to expand...
Click to collapse
I did this and found the device but where exactly is the UID located?
looking at other threads, the serial number is the UID however the serial number entry is blank for this device
Joey22688 said:
Trying to recover a bricked acer a500, I just have a black screen on boot with no boot logo, vibration or letters or words on the screen
trying to enter recovery/update mode doesnt work
Im up to the step where is says put in your UID into the program
I did this and found the device but where exactly is the UID located?
looking at other threads, the serial number is the UID however the serial number entry is blank for this device
Click to expand...
Click to collapse
this method is total overkill for your situation....
how did u get yr tab like this???
if u have total black screen - is the power button lite on?????
what bootloader version are u on
have you had a custom recovery on there
to get your cpuid follow the first link to a guide in my signature - you need to follow steps in the guide if you have any probs then post in the guide thread
the previous owner said he tried to install a custom rom and I think it crashed and this is the result
the power light turns on (white)
if I just power it on, the backlight turns on however its just a black screen, nothing else happens
apx mode seems to be the only thing working right now, I thought this method would be my only chance to get the recovery mode working again
I dont know anything else about the tablet, bootloader ect...
Joey22688 said:
the previous owner said he tried to install a custom rom and I think it crashed and this is the result
the power light turns on (white)
if I just power it on, the backlight turns on however its just a black screen, nothing else happens
apx mode seems to be the only thing working right now, I thought this method would be my only chance to get the recovery mode working again
I dont know anything else about the tablet, bootloader ect...
Click to expand...
Click to collapse
ok thats cool, apx mode works!!!
well try this first - using hard reset:
1) Turn off your tablet,
2) Rotation lock on your left;
3) Press Vol Up closest to rotation lock and power on simultaneously
4) As soon as the tablet vibrates you can release the power button and you should start to switch rotation lock left and right till you see
Erasing Userdata...
Erasing Cache...
Vol Up is still pressed;
5) The tablet starts to format
6) Your tablet will be as clean as it can be.
otherwise plan B!!!
do u know whether tab was running HC or ICS?
u need some package files and a flash tool either apxflash or nvflash
if u start the tools and then connect your tab via usb cable to your pc
there are links to guides in my sig
my cpuid guide shows u what u need and where to get it, info about your cpuid too and drivers - altho you wont need to worry too much seeing as youre in apx
civatos guide has all the links to the packages and all the info you need to patch the bootloader, then you can flash one of the ics roms and youre all good!!!
the process is simple enough - but if you get it wrong it can be frustrating as heck!!!!
tried that method, get no vibration, devices just turns on to the black screen like normal
the only problem right now, I cant retrieve the uid
adb
when I type adb devices, nothing shows up
A500 manager
tried to the use the uid retriever tool however it just stays blank, same for the bootloader
it says it detects the A500 in apx mode
usbdevice view
shows no serial number for this device
I see there is a A500 motherboard on ebay (cant link to outside links...)
"Acer Iconia A500 Tablet Replacement Parts - MainBoard - 32GB MB, H6000 001 PBJ20"
"Complete with Android 4.x installed, 32GB memory and ready to install and boot."
could I get that and just replace the whole mobo and it will work fine?
Joey22688 said:
tried that method, get no vibration, devices just turns on to the black screen like normal
the only problem right now, I cant retrieve the uid
Click to expand...
Click to collapse
OK just clarify - black screen, that is, nothing at all displayed AND Power Light ON??
IF u r in apx mode then
U have a couple of options
EUU flash back to HC 3.2.1 or
apxFlash to ICS
Everything you need for doing this is in my cpuid guide link in my sig.
open apxflash tool do not connect your tab Yet
Go as far as the enter apx mode
Now connect your tab to yr pc
Windows should install apx drivers
Once installed. try clicking blue arrow first
If u don't see the do u want to flash window then
You'll need to click on the "enter apx mode " button instead then
Click blue arrow
Hopefully the PC and tab are feeling pretty friendly and decide to take each other on
The tab should flash the bl and install recovery.....u should be good to go from there!!!
EDIT you can try cmd prompt on nvflash folder
Run a500.bat or.bat file that should kick you to bootloader mode
its really important that your screen display something in white letters!!
Entering Acer download mode OR
Entering apx mode
The flash will fail if u don't see something like this. This holds true for all methods
I see there is a A500 motherboard on ebay (cant link to outside links...)
"Acer Iconia A500 Tablet Replacement Parts - MainBoard - 32GB MB, H6000 001 PBJ20"
"Complete with Android 4.x installed, 32GB memory and ready to install and boot."
could I get that and just replace the whole mobo and it will work fine?
Click to expand...
Click to collapse
Wayyyy outta my league m8. Sum1 else will know....
yes, its just a black screen, no vibration, no boot logo, no letters or words on the screen, backlighting for the screen is on, and the power light is on
when I press the blue arrow in a500 apx flash tool it asks me for my SBK, going to that generator site it then asks for my UID which I cant retrieve
Joey22688 said:
yes, its just a black screen, no vibration, no boot logo, no letters or words on the screen, backlighting for the screen is on, and the power light is on
when I press the blue arrow in a500 apx flash tool it asks me for my SBK, going to that generator site it then asks for my UID which I cant retrieve
Click to expand...
Click to collapse
if you do not have your cpu id and
if you do not have access to adb and
you're stuck in apx mode
then things are looking grim.....
the only way to get into your tab without yr cpuid is fastboot
but you need adb working for that
someone else was stuck in apx mode a day or two ago, try a search...maybe...
I'm sorry guys I was a little off of this thread .
I will be glad to help you guys to get your UID or any problem that you have even though I don't have the Tablet anymore.
Thanks for all and God bless you all.
dibb_nz said:
if you do not have your cpu id and
if you do not have access to adb and
you're stuck in apx mode
then things are looking grim.....
the only way to get into your tab without yr cpuid is fastboot
but you need adb working for that
someone else was stuck in apx mode a day or two ago, try a search...maybe...
Click to expand...
Click to collapse
There is no way to fastboot the tablet in that mode, the only way is to get the UID and then decode it and NVFlash the Bootloader after it is done then put ICS or HC and the EC_ROM files and the tablet will be working again.
I'm gonna throw in the towel and just buy a new mobo for cheap, it seems im screwed without the UID and cant retrieve it either
I wish the previous owner would have gotten the UID beforehand
thanx for the all the help though
Joey22688 said:
I'm gonna throw in the towel and just buy a new mobo for cheap, it seems im screwed without the UID and cant retrieve it either
I wish the previous owner would have gotten the UID beforehand
thanx for the all the help though
Click to expand...
Click to collapse
Sent from my A500 using xda premium
Just come across this check here: /sys/firmware/fuse/acer_cpuid
dibb_nz said:
Just come across this check here: /sys/firmware/fuse/acer_cpuid
Click to expand...
Click to collapse
What do I exactly do?
I dont have any access to the devices files and do not have a dump
kinda of a new at this. basically my tablet boots with asus logo and top left says "the device is UnLocked"
tried to flash cyanogen mod and put some wrong files.
i know its bricked but cant do much. Vol- + Pwr doesnt get me anywher
Vol+ + Pwr makes some recognition on my computer but cant do much. like fastboot wont recognize as a device.
pls help\
UPDATE: Got it to go in APX mode. and got drivers installed. dont know whats next...
thanks in advance
Few questions first... (I am an Android n00b, but have had issues and flashed custom ROMs about 9 times now.)
Did you make sure to see if the device was properly detected in your OS of choice beforehand? Installed all the software to do so?
Did you install either CWM or TWRP to the device?
Make a recovery in case of issue?
I followed the topic (in this very forum) about flashing. I had some issues being new and all, but got it right... BEFORE I did an actual flash.
[GUIDE] TF300T Unlock/Root/Flash for Factory JB Devices (newbie friendly)
I am using the latest TWRP instead of the guides CWM advice. Due to CWM failing to create a backup for me. I felt not having a backup plan, was something similar to going to a redlight district without a rubber. Which means... What if something goes wrong, how will I fix it?
Does the device detect? Can you move files to the device from your computer?
techknewz1 said:
kinda of a new at this. basically my tablet boots with asus logo and top left says "the device is UnLocked"
tried to flash cyanogen mod and put some wrong files.
i know its bricked but cant do much. Vol- + Pwr doesnt get me anywher
Vol+ + Pwr makes some recognition on my computer but cant do much. like fastboot wont recognize as a device.
pls help\
UPDATE: Got it to go in APX mode. and got drivers installed. dont know whats next...
thanks in advance
Click to expand...
Click to collapse
Hey there, just curious as to how you managed to 'put some wrong files', what exactly did you do to achieve this?
If you can still get into recovery and you have fastboot hooked up, you can proceed to either:
re-flash the correct CWM version if your recovery is broken, or
upload the CyanogenMod package you want to install to your device and simply wipe & flash!
I don't recommend installing last week's nightlies, rotation is still broken. Not sure as to what version last worked.
Good luck!
Xynergy said:
Hey there, just curious as to how you managed to 'put some wrong files', what exactly did you do to achieve this?
If you can still get into recovery and you have fastboot hooked up, you can proceed to either:
re-flash the correct CWM version if your recovery is broken, or
upload the CyanogenMod package you want to install to your device and simply wipe & flash!
I don't recommend installing last week's nightlies, rotation is still broken. Not sure as to what version last worked.
Good luck!
Click to expand...
Click to collapse
So here is what happened. Basically i tried flashing files and put it for the wrong tablet. Now i can only get into apx mode and fastboot doesnt recognize it and neither does adb recognize it.
Hi, this is my firt post, i'm going to quote this problem that's the same problem that I have...
"Device : Nexus 7
Problem : I was trying to unroot it and flash a 4.4.2 ROM to the device and i ended up bricking it somehow. I looked around a lot on here and youtube. I found one solution i had not tried which was to get into recovery mod. But the device was stuck on the boot loaded. So i hard shut it down, and pressed the key combination to load the boot loader. And, the screen wasn't loading. I heard the little chimes my computer makes when ever a USB device is active, so i heard the thing load into the boot loader. But its not showing on the screen!
Please help i really shouldn't have done this. But i am literally about to cry.
I tried using Wugfresh's Nexus toolkit to flash the ROM, and it would stop on sending system.
I dont know if i did something wrong, if the kernel was messed up, if the kit wasnt right, please as the video said there is 4 million members here. someone has to know what to do...
-Sean"
I did exactly the same thing that this guy did... ----> http://forum.xda-developers.com/showthread.php?t=2345874
The difference is that I don't live in USA and my Nexus doesn't have warranty... What can I do T.T my pc shows the tablet as Unknown Device and makes a sound when I puggle it, there has to be something that I can do >.<
EverAngelOn said:
Hi, this is my firt post, i'm going to quote this problem that's the same problem that I have...
"Device : Nexus 7
Problem : I was trying to unroot it and flash a 4.4.2 ROM to the device and i ended up bricking it somehow. I looked around a lot on here and youtube. I found one solution i had not tried which was to get into recovery mod. But the device was stuck on the boot loaded. So i hard shut it down, and pressed the key combination to load the boot loader. And, the screen wasn't loading. I heard the little chimes my computer makes when ever a USB device is active, so i heard the thing load into the boot loader. But its not showing on the screen!
Please help i really shouldn't have done this. But i am literally about to cry.
I tried using Wugfresh's Nexus toolkit to flash the ROM, and it would stop on sending system.
I dont know if i did something wrong, if the kernel was messed up, if the kit wasnt right, please as the video said there is 4 million members here. someone has to know what to do...
-Sean"
I did exactly the same thing that this guy did... ----> http://forum.xda-developers.com/showthread.php?t=2345874
The difference is that I don't live in USA and my Nexus doesn't have warranty... What can I do T.T my pc shows the tablet as Unknown Device and makes a sound when I puggle it, there has to be something that I can do >.<
Click to expand...
Click to collapse
Can you get into the bootloader still?
I can't
b3ltazar said:
Can you get into the bootloader still?
Click to expand...
Click to collapse
No, I can't. The screen is completely black.
Have you tried any of the suggestions in the thread you linked in the OP?
EverAngelOn said:
No, I can't. The screen is completely black.
Click to expand...
Click to collapse
Do you get a charging icon when you plug in the n7? did you try a diffrent cable?What exactly does ur computer do when you plug in the dead n7 (does it thy try to install a apx driver) Does toolkit see tablet like its in the bootloader? If so try to flash a new bootloader!
try this found in another thread
To get it out of AXP mode, the correct instructions:
1. Plug in the usb into computer
2. Hold Volume Down + Volume Up + Power simultaneously for like 15 seconds
3. The bootloader should show up.
4. If it doesn't, unplug the usb cable, and plug it back in and then repeat the these procedures
Wugs tool kit
First when you plug it in hold all three power buttons
Second
I also have used the tool kit it gets stuck all the time on the flashing system. I think its a time out error because of the complexity of extracting the image and flahing the image with out a retry or check command. Here is a fix that i have figured out. When in Wugs tool kit download the Os Version you want on your device locate the folder with the downloaded image and extract it using 7 zip. once extracted flash the remaing .img files seperatly under andvance setting menu select flash system then user data it should boot right up. if you forgot what version you flashed previously flash all img files boot bootloader system user etc. if you still have problems let me know. i can give you my email.
Click thanks if i helped
b3ltazar said:
Do you get a charging icon when you plug in the n7? did you try a diffrent cable?What exactly does ur computer do when you plug in the dead n7 (does it thy try to install a apx driver) Does toolkit see tablet like its in the bootloader? If so try to flash a new bootloader!
try this found in another thread
To get it out of AXP mode, the correct instructions:
1. Plug in the usb into computer
2. Hold Volume Down + Volume Up + Power simultaneously for like 15 seconds
3. The bootloader should show up.
4. If it doesn't, unplug the usb cable, and plug it back in and then repeat the these procedures
Click to expand...
Click to collapse
My tablet doesn't show the charging icon, I've tried with different cables, when I plug it to the laptop it makes a sound and shows an APX driver... I'm stressed and that instructions didn't work for me.
EverAngelOn said:
My tablet doesn't show the charging icon, I've tried with different cables, when I plug it to the laptop it makes a sound and shows an APX driver... I'm stressed and that instructions didn't work for me.
Click to expand...
Click to collapse
Unfortunately it sounds like you erased your bootloader and nvflash can do nothing for you unless you used the unbrickable mod before u f'ed up your tablet. Try sending it to asus for Warranty tell em you installed the ota update and it wouldn't boot up afterwards. I have read many threads about this issue with nobody being able to recover there tablet. Asus does have global warranty