for some reason, i can connect to kies with no problem, but when i go to upgrade the firmware to the newest JI6 official, it fails and shows the attached picture. any ideas? I need to get this update because my vibrant is acting up pretty ba and as far as I know, this is the only current fix. I dont want to use the samfirmwares.com version because I want the official version. Help!
What version of Kies are you on? I'm on 1.5.1 and I never see an update. Maybe 1.5.3 can see the update?
Just updated mine about an hour ago through kies. Worked fine.
Kies Version: 1.5.1
Prior Rom: Bionix 1.4
Kernel: Stock
im on 1.5.3 and it still wont work, i just tried it again. I tried rebooting the pone and computer and still nothing worked. it just keeps saying unable to update. when you installed kies, did you install it as the UK as your country or US?
Mine says "PC Connection only available in idle screen Close running applications" when I try to connect with Samsung Kies mode???? What am I doing wrong?
Back out of everything on the phone, make sure you are in Kies mode. Run Kies first, then connect phone.
I have yet to see on the forum where somebody went from the JI5 from Kies to JI6 either OTA or through Kies. I've tried 1.5.1 and 1.5.3.81 for Kies and neither will update my phone.
Updating through Kies right now. I had to do the regedit fix for Kies 1.5.3.
EDIT: Whew, phone isn't bricked. Just made it past the Vibrant screen.
is it possible that kies may brick the phone?
How long is the Kies update taking for you guys? I'm pretty sure I'm hung up. It made it through the downloading, and now it's about a 1/4 of the way through the upgrade bar, but hasn't moved for an hour and a half.
I am totally stock. No mods, no nothing.
nateball said:
How long is the Kies update taking for you guys? I'm pretty sure I'm hung up. It made it through the downloading, and now it's about a 1/4 of the way through the upgrade bar, but hasn't moved for an hour and a half.
I am totally stock. No mods, no nothing.
Click to expand...
Click to collapse
that's not good. if i'm in your condition maybe i'm already sweating. maybe just wait a little more.
i tried to do this but the kies hung up when it's copying my contacts.
Well, it's not gonna do me any good to sweat. I'm over two hours now of just watching it sit there 25% done. No movement at all, computer's cpu is at 0% use. I think I have to pull the plug and then call Tmob if the phone is messed up.
Just to be clear, I was 100% stock, no root, no fixes, nothing other than apps installed from the marketplace. Here goes nothing...
nateball said:
Well, it's not gonna do me any good to sweat. I'm over two hours now of just watching it sit there 25% done. No movement at all, computer's cpu is at 0% use. I think I have to pull the plug and then call Tmob if the phone is messed up.
Just to be clear, I was 100% stock, no root, no fixes, nothing other than apps installed from the marketplace. Here goes nothing...
Click to expand...
Click to collapse
what happened? me too, i unplugged my phone before anything goes wrong.
ive made the backup of my contacts, but after that it cant continue to update, it fails every time, i guess i am stuck waiting for the ota unless someone has a fix for kies
My phone now only shows an image of a mobile phone and a desktop with a caution sign in between them. The same image shows if I restart using the power button, pull the battery, shake it vigorously, etc. I do believe I am now the proud owner of a non-functioning phone. Kies will not recognize it, nor does windows recognize it when it is plugged in. Crap.
I guess I'm off to the T-mobile store to try and get a replacement.
im in same boat i have no clue what im doing wrong? im i missing steps here?
if has any idea what i need to please help.
im a bone stock
Well, I'm pretty sure that we are now lacking functioning firmware on the phone. I'm thinking a new phone is the way to go, but maybe they can do something at the store.
Anyone where the update is stuck, you will probably have a soft brick at this point. However, this does not mean your phone is broken completely, it just means you will probably have to get into Download Mode and Flash via Odin.
Have fun
nateball said:
My phone now only shows an image of a mobile phone and a desktop with a caution sign in between them. The same image shows if I restart using the power button, pull the battery, shake it vigorously, etc. I do believe I am now the proud owner of a non-functioning phone. Kies will not recognize it, nor does windows recognize it when it is plugged in. Crap.
I guess I'm off to the T-mobile store to try and get a replacement.
Click to expand...
Click to collapse
that was my experience using kies too (whether 1.5.1 or 1.5.3). since then, i've used odin (v1.3) about 6 times (not a lot, i know) with all successes. don't let it scare you.
to get into download mode just do the following.
1) pull battery then put it back in so the phone is completely off
2) disconnect usb from phone (but leave it connected to pc)
3) while holding down volume up and down buttons together, insert usb cable
that should take you straight to download mode.
then load up odin (check the bible for flash instructions -- pretty simple though). what i did was flash to JFD, then flashed to JI5. worked like a charm.
honestly, kies was a nightmare to get working and once it did, it messed up. odin has been simple and painless. one note, after flashing with odin, first boot may be slow. when i flashed JI6 OTA over JI6 leaked, it took about 10 minutes, at least, to boot.
good luck!
I know it's not helping you guys: but my Kies update (newest release) was smooth sailings after I did the registry fix.
I did none of the backups suggested (I tried so many times before so they were already done this time)
Let me know if you want details about my config.
Sent from my SGH-T959 using XDA App
Thanks for all the suggestions everyone, but I did make judicious use of the search button and google before I took it back to the store. I tried every single combination of button presses for every single mode, from every single forums posts I could find. No luck at all. The T-mob guys also had no luck, and it just so happened that a Samsung rep stopped by to see how the Vibrant was being received by the public and he couldn't get any recovery mode to work either. (He had no idea about when Froyo might be out though..... just in case you were wondering) Anyhow, I'm pretty sure that I for one believe in the myth of the hardware locked Vibrants.
My Acer is stock with only ADW Launcher. I've not rooted it or done any modifications to it otherwise. No SD card in it when OTA attempted.
The OTA attempted to download today but seemed to have failed and ultimatly seems to have bricked the tablet. I called Acer Support and they want me to send the tab in to be fixed but I'm hoping there is a way to fix it still.
The OTA prompte came up and I agreed to download.
Download progress bar started but an hour later when I came back to my desk it was still at 0%.
I tried to cancel but it wouldn't cancel nor could I get back to the desktop or to anything else, basically frozen.
Not sure whatelse to do, I powered it off and turned it back on.
The Acer logo comes on and then the Android logo and that is as far as it gets.
Acer had me try holding power and vol down button. That would get me to android with a yellow triangle but thats its.
I found online the hard reset of power/vol up and toggle switch and got 'Erasing Data' but it never gets further.
Anyone have any suggestions of what to try?
pbuder said:
My Acer is stock with only ADW Launcher. I've not rooted it or done any modifications to it otherwise. No SD card in it when OTA attempted.
The OTA attempted to download today but seemed to have failed and ultimatly seems to have bricked the tablet. I called Acer Support and they want me to send the tab in to be fixed but I'm hoping there is a way to fix it still.
The OTA prompte came up and I agreed to download.
Download progress bar started but an hour later when I came back to my desk it was still at 0%.
I tried to cancel but it wouldn't cancel nor could I get back to the desktop or to anything else, basically frozen.
Not sure whatelse to do, I powered it off and turned it back on.
The Acer logo comes on and then the Android logo and that is as far as it gets.
Acer had me try holding power and vol down button. That would get me to android with a yellow triangle but thats its.
I found online the hard reset of power/vol up and toggle switch and got 'Erasing Data' but it never gets further.
Anyone have any suggestions of what to try?
Click to expand...
Click to collapse
You could try a manual update to 3.2 using the official Acer ota ROM found here:
http://forum.xda-developers.com/showthread.php?t=1113878
Drop the ROM associated with your current GEN on your external SD card, rename it "update.zip", then boot with your external SD card in the slot while holding power and volume.
Should do the trick.
Okay... so got it out of its hung state and its now sporting Acer_A500_7.006.01_COM_GEN2. I lost everything somehow but I can deal with that. The problem now is that the Wifi won't make connection. It attempts too but never obtains the ip address. Everything else in the house connects fine. Is there a fix for this or do I need to attempt the downgrade back to 3.1 to get wifi back?
UPDATE: Fixed the wife... not sure exactly how though. Was trying the different roms from the thread below and now am showing Acer_A500_7.006.13_COM_GEN2 and wifi works.
http://forum.xda-developers.com/showthread.php?t=1113878
pbuder said:
Okay... so got it out of its hung state and its now sporting Acer_A500_7.006.01_COM_GEN2. I lost everything somehow but I can deal with that. The problem now is that the Wifi won't make connection. It attempts too but never obtains the ip address. Everything else in the house connects fine. Is there a fix for this or do I need to attempt the downgrade back to 3.1 to get wifi back?
UPDATE: Fixed the wife... not sure exactly how though. Was trying the different roms from the thread below and now am showing Acer_A500_7.006.13_COM_GEN2 and wifi works.
http://forum.xda-developers.com/showthread.php?t=1113878
Click to expand...
Click to collapse
Good job!
My wonderful wife gave me an Acer a500 for Christmas. Awesome gift. I had rooted it immediately with no problems, since all of my phones and families phone are rooted, it just seemed to be the natural thing to do.
As someone that "plays" with their android a lot I did all of the backups. Well, the time came to have my tablet "approved" for use at my company and also have the appropriate "encryption" software and keys added. Just as a precaution I decided to restore the original backup and unroot the tab.
All was going well until I received the update message. I went ahead and downloaded the update and ran it. During the install process it froze. I thought it was just busy so I left it for a good 20 minutes and finally realized it was frozen. I rebooted and it went through a couple of reboots and finally settled on the lock screen. But now I find the touch screen unresponsive.
I plugged in a mouse and keyboard in hopes that I could get back into it and start over, but, although, the mouse shows up, it is jumpy sluggish and will not grab the lock to slide open and eventually freezes.
I have tried all of the "update.zip" files I could find and they all fail at one point or another.
ADB allows me to explore in shell but since I unrooted, I cannot get su privileges.
Acer is of course, useless and the vendor it was purchased from is worthless.
I have been through every thread I could find and tried every trick I could come up with. Now I'm just stuck.
Any help is appreciated
I've had this a couple of times already. Usually just turning the screen off and on a couple of times does the job (the issue seems to be with the driver, also on various custom roms). Just try it after each off-on cycle, most of the time it takes no more than two or three tries, though there are exceptions.
Thanks, but it has been rebooted many many times since it's demise.
Decided to skip sleep tonight and keep plugging away.
I found an update.zip recovery file for an a501. Figured I can't do much worse so I went ahead and ran it.
It froze at about 95% but.........
Good News:
The tablet is responsive and touch panel works again.
Bad News:
It boots straight into system settings and although you can open the settings menu, nothing actually launches.
Decided to try all of the old update.zips and still everything fails.
No more ADB response.
When you originally unrooted your device did you revert back to the stock recovery or did you leave cwm on your device?? If you left cwm on your device that may be the problem with the update.zips and OTAs.
You are sooo right. I've never gone back to a stock rom before and I completely forgot about reverting to the stock recovery.
As a matter of fact, I was on Civato's Flexstriker 3.2.1 rom with the new CWM before I reverted back to the stock rom.
Well, at least we've determined my stupid mistake, but now the question lies: "How do I get back to any working rom?"
Here's an update. I did find an update.zip file that also begins to load but does not finish. It stops at 95% still.
I will attach the photos in case someone notices something otherwise I am at a loss. In addition to all of the above, I tried everything I could to get into APX mode but nothing. I am willing to try almost anything at this point, so all suggestions are appreciated.
Something I noticed was the recovery for the a501 was android with gears spinning in the body. The recovery I have now is a package with an arrow. The recoveries are different. The current update file is Acer_A500_1.145.05_COM_GEN1
So this brings me to a question: Can I put Thor's 1.6 CWM back on the a500 and at least work from there? I do have my original backups and thought I might be able to get somewhere that way.
Hi guys
Im having a nightmare with my vega, I have been running vegacomb for a while without issue and decided I fancied upgrading to an ICS ROM instead, but have hit major problems. I went into rom manager to do a nandroid before I flashed anything, when I opened the app it told me to confirm the device type. it came up saying viewsonic 10 so I confirmed it. Then it decided to re-flash the recovery from within the app, I let it do that too. Then I told it to do a backup of the current ROM, so it reboots and then I get nothing. It does the same thing that normally happens when you go into NVflash (screen backlight comes on, nothing else). I have plugged it into the PC and its not in this mode, its also not letting me get into nvflash using the 2 second hold method. Im really stummped now, I have been messing round with android for a while so im pretty familiar with flashing etc, but without being able to get into recovery im lost. Do you have any suggestions?
Hi everyone,
I got my Essential Phone the other day thanks to the Prime Day offer.
Since I set it up, it shows that there is a OTA available. It tries to download the OTA but after less than a minute of trying, it stops and says "download paused".
I tried an flashed the May-OTA manually through fastboot. But after booting up I face the same issue with trying to update to the July-OTA.
Downloading other stuff works fine...
Anyone else with the issue.? Any ideas?
Regards